2017-08-07
Download DLINKES-SINGLE-IP-MIB.txt Open DLINKES-SINGLE-IP-MIB.txt in a new tab
The Single IP management MIB.
SCALARS (15) · TABLES (4) · TRAPS (14)
| Name | OID |
|---|---|
| esSingleIpMSTable | 1.3.6.1.4.1.171.17.225.1.3 |
| esSingleIpCaSTable | 1.3.6.1.4.1.171.17.225.1.4 |
| esSingleIpGroupTable | 1.3.6.1.4.1.171.17.225.1.5 |
| esSingleIpNeighborTable | 1.3.6.1.4.1.171.17.225.1.6 |
END OF TOC
1.3.6.1.4.1.171.17.225.0.1.1
MacAddressRepresents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires MAC addresses to be transmitted most significant bit first. SIZE (6) · OCTET STRING · hint 1x:
The mac address that the member switch sent.
1.3.6.1.4.1.171.17.225.0.1.2
OCTET STRING SIZE (0..1024)
The string that the member switch sent.
1.3.6.1.4.1.171.17.225.1.1.1
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..64) · OCTET STRING · hint 255a
This object indicates the version of Single IP Management supported in the system.
1.3.6.1.4.1.171.17.225.1.1.2
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..64) · OCTET STRING · hint 255a
This object indicates the capability of the switch system.
1.3.6.1.4.1.171.17.225.1.1.3
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..64) · OCTET STRING · hint 255a
This object indicates the platform of the switch system.
1.3.6.1.4.1.171.17.225.1.1.4
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..64) · OCTET STRING · hint 255a
This object indicates the firmware version of the switch system.
1.3.6.1.4.1.171.17.225.1.1.5
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..64) · OCTET STRING · hint 255a
This object indicates the device name of the switch system.
1.3.6.1.4.1.171.17.225.1.1.6
MacAddressRepresents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires MAC addresses to be transmitted most significant bit first. SIZE (6) · OCTET STRING · hint 1x:
This object specifies the MAC address of the switch system.
1.3.6.1.4.1.171.17.225.1.2.1
INTEGER1 = other2 = disabled3 = enabled · Integer32
This object indicates Single IP Management is enabled or disabled on the system.
1.3.6.1.4.1.171.17.225.1.2.2
INTEGER1 = cs2 = cas3 = ms · Integer32
This object indicates the role state of the switch system.
1.3.6.1.4.1.171.17.225.1.2.3
Integer32 (100..255)
This object indicate the holdtime of the switch in seconds. The default value is 100, the maximum value is 255, and the minimum value is 100.
1.3.6.1.4.1.171.17.225.1.2.4
Integer32 (30..90)
This object indicates the time interval of the switch in seconds to periodically send out Single IP protocol control packets. The default value is 60, the maximum value is 120, and the minimum value is 30. The esSingleIpTimeInterval will always <= esSingleIpHoldtime/2.
1.3.6.1.4.1.171.17.225.1.2.5
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..64) · OCTET STRING · hint 255a
This object is used to configure the group name for the commander switch.
1.3.6.1.4.1.171.17.225.1.2.6.1
INTEGER1 = enabled2 = disabled · Integer32
When enabled (1), whenever the commander detects a member's trap event, a trap will be sent out.
1.3.6.1.4.1.171.17.225.1.2.7
Integer32 (1..4094)
This object is used to configure the SIM management VLAN.
1.3.6.1.4.1.171.17.225.1.3
Index: esSingleIpMSMacAddr
This table contains information about member switches which belong to the single IP management group. A member will be joined into the group by row creation. Before a switch is joined into a group as a member switch, it must exist in the candidate table list.
1.3.6.1.4.1.171.17.225.1.3.1.1
MacAddressRepresents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires MAC addresses to be transmitted most significant bit first. SIZE (6) · OCTET STRING · hint 1x:
This object specifies the MAC address of the member switch.
1.3.6.1.4.1.171.17.225.1.3.1.2
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..64) · OCTET STRING · hint 255a
Specifies the name of switch.
1.3.6.1.4.1.171.17.225.1.3.1.3
INTEGER1 = noOp2 = transformToCaS · Integer32
This object is used to control entry state. It will transform to CaS table when set to 'transformToCaS'. No action is taken if this object is set to 'noOp'. When read, the value 'noOp' is returned.
1.3.6.1.4.1.171.17.225.1.3.1.4
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..64) · OCTET STRING · hint 255a
Specifies the firmware version of the switch.
1.3.6.1.4.1.171.17.225.1.3.1.5
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..64) · OCTET STRING · hint 255a
Specifies the capability of the switch.
1.3.6.1.4.1.171.17.225.1.3.1.6
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..64) · OCTET STRING · hint 255a
Specifies the platform of the switch.
1.3.6.1.4.1.171.17.225.1.3.1.7
Integer32
Specifies the holdtime of Single IP Management protocol sent by this member switch.
1.3.6.1.4.1.171.17.225.1.3.1.8
INTEGER1 = normal2 = waiting · Integer32
Specifies the config ACK status of this device. allow: device can send a config packet not-allow: device still wait for config ACK.
1.3.6.1.4.1.171.17.225.1.4
Index: esSingleIpCaSMacAddr
This table contains information about candidate switches. This table is a read-only table listing all information about candidate switches that will be maintained automatically by the Single IP topology discovery protocol.
1.3.6.1.4.1.171.17.225.1.4.1.1
MacAddressRepresents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires MAC addresses to be transmitted most significant bit first. SIZE (6) · OCTET STRING · hint 1x:
This object specifies the MAC address of the candidate switch.
1.3.6.1.4.1.171.17.225.1.4.1.2
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..64) · OCTET STRING · hint 255a
Specifies the name of switch.
1.3.6.1.4.1.171.17.225.1.4.1.3
INTEGER1 = noOp2 = transformToMS · Integer32
This object is used to control entry state. It will transform to MS table when set to 'transformToMS'. No action is taken if this object is set to 'noOp'. When read, the value 'noOp' is returned.
1.3.6.1.4.1.171.17.225.1.4.1.4
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..64) · OCTET STRING · hint 255a
Specifies the firmware version of the switch.
1.3.6.1.4.1.171.17.225.1.4.1.5
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..64) · OCTET STRING · hint 255a
Specifies the capability of the switch.
1.3.6.1.4.1.171.17.225.1.4.1.6
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..64) · OCTET STRING · hint 255a
Specifies the platform of the switch.
1.3.6.1.4.1.171.17.225.1.4.1.7
Integer32
Specifies the holdtime of the Single IP Management protocol sent by this candidate switch.
1.3.6.1.4.1.171.17.225.1.4.1.8
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..16) · OCTET STRING · hint 255a
Specifies the CaS password when creating the MS entry. The object is used only when creating the esSingleIpCaSEntry. The value always shows a zero length string.
1.3.6.1.4.1.171.17.225.1.4.1.9
INTEGER1 = normal2 = waiting · Integer32
Specifies the config ACK status of this device. allow: device can send a config packet not-allow: device still wait for config ACK.
1.3.6.1.4.1.171.17.225.1.5
Index: esSingleIpGroupMacAddr
This table contains information about Single IP Management groups learned by the commander switch. This table is a read-only table listing all information about the Single IP groups that will maintained automatically by Single IP topology discovery protocol.
1.3.6.1.4.1.171.17.225.1.5.1.1
MacAddressRepresents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires MAC addresses to be transmitted most significant bit first. SIZE (6) · OCTET STRING · hint 1x:
This object specifies the MAC address of the commander switch.
1.3.6.1.4.1.171.17.225.1.5.1.2
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..64) · OCTET STRING · hint 255a
Specifies the name of the Single IP Management group.
1.3.6.1.4.1.171.17.225.1.5.1.3
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..64) · OCTET STRING · hint 255a
Specifies the name of commander switch of the group.
1.3.6.1.4.1.171.17.225.1.5.1.4
Integer32
Specifies the member switch number of the group.
1.3.6.1.4.1.171.17.225.1.5.1.5
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..64) · OCTET STRING · hint 255a
Specifies the firmware version of the switch.
1.3.6.1.4.1.171.17.225.1.5.1.6
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..64) · OCTET STRING · hint 255a
Specifies the capability of the switch.
1.3.6.1.4.1.171.17.225.1.5.1.7
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..64) · OCTET STRING · hint 255a
Specifies the platform of the switch.
1.3.6.1.4.1.171.17.225.1.5.1.8
Integer32
Specifies the holdtime of the Single IP Management protocol sent by this commander switch.
1.3.6.1.4.1.171.17.225.1.6
Index: esSingleIpNBReceivedPort · esSingleIpNBMacAddr
This table contains information about Single IP Management neighbors learned by the switch. This table is a read-only table listing all the information about Single IP neighbors that will be maintained automatically by the Single IP topology protocol.
1.3.6.1.4.1.171.17.225.1.6.1.1
Integer32 (1..2147483647)
Specifies the received port of the neighbor switch.
1.3.6.1.4.1.171.17.225.1.6.1.2
MacAddressRepresents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires MAC addresses to be transmitted most significant bit first. SIZE (6) · OCTET STRING · hint 1x:
This object specifies the MAC address of the neighbor switch.
1.3.6.1.4.1.171.17.225.1.6.1.3
INTEGER1 = commander2 = candidate3 = member · Integer32
This object specifies the role state of the neighbor switch.
1.3.6.1.4.1.171.17.225.0.0.11
The commander switch will send esSingleIpMSColdStart notification to the indicated host when its member generates a cold start notification.
1.3.6.1.4.1.171.17.225.0.1.1
MacAddressRepresents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires MAC addresses to be transmitted most significant bit first. SIZE (6) · OCTET STRING · hint 1x:
The mac address that the member switch sent.
1.3.6.1.4.1.171.17.225.0.0.12
The commander switch will send esSingleIpMSWarmStart notification to the indicated host when its member generates a warm start notification.
1.3.6.1.4.1.171.17.225.0.1.1
MacAddressRepresents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires MAC addresses to be transmitted most significant bit first. SIZE (6) · OCTET STRING · hint 1x:
The mac address that the member switch sent.
1.3.6.1.4.1.171.17.225.0.0.13
The commander switch will send esSingleIpMSLinkDown notification to the indicated host when its member generates a link down notification.
1.3.6.1.4.1.171.17.225.0.1.1
MacAddressRepresents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires MAC addresses to be transmitted most significant bit first. SIZE (6) · OCTET STRING · hint 1x:
The mac address that the member switch sent.
1.3.6.1.2.1.2.2.1.1
INTEGER · Integer32
A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
1.3.6.1.4.1.171.17.225.0.0.14
The commander switch will send esSingleIpMSLinkUp notification to the indicated host when its member generates a link up notification.
1.3.6.1.4.1.171.17.225.0.1.1
MacAddressRepresents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires MAC addresses to be transmitted most significant bit first. SIZE (6) · OCTET STRING · hint 1x:
The mac address that the member switch sent.
1.3.6.1.2.1.2.2.1.1
INTEGER · Integer32
A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
1.3.6.1.4.1.171.17.225.0.0.15
The commander switch will send esSingleIpMSAuthFail notification to the indicated host when its member generates an authentation failure notification.
1.3.6.1.4.1.171.17.225.0.1.1
MacAddressRepresents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires MAC addresses to be transmitted most significant bit first. SIZE (6) · OCTET STRING · hint 1x:
The mac address that the member switch sent.
1.3.6.1.4.1.171.17.225.0.0.16
The commander switch will send esSingleIpMSnewRoot notification to the indicated host when its member generates a new root notification.
1.3.6.1.4.1.171.17.225.0.1.1
MacAddressRepresents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires MAC addresses to be transmitted most significant bit first. SIZE (6) · OCTET STRING · hint 1x:
The mac address that the member switch sent.
1.3.6.1.4.1.171.17.225.0.0.17
The commander switch will send esSingleIpMSTopologyChange notification to the indicated host when its member generates a topology change notification.
1.3.6.1.4.1.171.17.225.0.1.1
MacAddressRepresents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires MAC addresses to be transmitted most significant bit first. SIZE (6) · OCTET STRING · hint 1x:
The mac address that the member switch sent.
1.3.6.1.4.1.171.17.225.0.0.18
The commander switch will send esSingleIpMSrisingAlarm notification to the indicated host when its member generates a rising alarm notification.
1.3.6.1.4.1.171.17.225.0.1.1
MacAddressRepresents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires MAC addresses to be transmitted most significant bit first. SIZE (6) · OCTET STRING · hint 1x:
The mac address that the member switch sent.
1.3.6.1.4.1.171.17.225.0.0.19
The commander switch will send esSingleIpMSfallingAlarm notification to the indicated host when its member generates a falling alarm notification.
1.3.6.1.4.1.171.17.225.0.1.1
MacAddressRepresents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires MAC addresses to be transmitted most significant bit first. SIZE (6) · OCTET STRING · hint 1x:
The mac address that the member switch sent.
1.3.6.1.4.1.171.17.225.0.0.20
The commander switch will send esSingleIpMSmacNotification notification to the indicated host when its member generates a MAC address variation notification.
1.3.6.1.4.1.171.17.225.0.1.1
MacAddressRepresents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires MAC addresses to be transmitted most significant bit first. SIZE (6) · OCTET STRING · hint 1x:
The mac address that the member switch sent.
1.3.6.1.4.1.171.17.225.0.1.2
OCTET STRING SIZE (0..1024)
The string that the member switch sent.
1.3.6.1.4.1.171.17.225.0.0.21
The commander switch will send esSingleIpMSPortTypeChange notification to the indicated host when its member generates a port type change notification.
1.3.6.1.4.1.171.17.225.0.1.1
MacAddressRepresents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires MAC addresses to be transmitted most significant bit first. SIZE (6) · OCTET STRING · hint 1x:
The mac address that the member switch sent.
1.3.6.1.2.1.2.2.1.1
INTEGER · Integer32
A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
1.3.6.1.4.1.171.17.225.0.1.2
OCTET STRING SIZE (0..1024)
The string that the member switch sent.
1.3.6.1.4.1.171.17.225.0.0.22
The commander switch will send esSingleIpMSPowerStatusChg notification to the indicated host when its member generates a power status change notification.
1.3.6.1.4.1.171.17.225.0.1.1
MacAddressRepresents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires MAC addresses to be transmitted most significant bit first. SIZE (6) · OCTET STRING · hint 1x:
The mac address that the member switch sent.
1.3.6.1.4.1.171.17.225.0.1.2
OCTET STRING SIZE (0..1024)
The string that the member switch sent.
1.3.6.1.4.1.171.17.225.0.0.23
The commander switch will send esSingleIpMSPowerFailure notification to the indicated host when its member generates a power failure notification.
1.3.6.1.4.1.171.17.225.0.1.1
MacAddressRepresents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires MAC addresses to be transmitted most significant bit first. SIZE (6) · OCTET STRING · hint 1x:
The mac address that the member switch sent.
1.3.6.1.4.1.171.17.225.0.1.2
OCTET STRING SIZE (0..1024)
The string that the member switch sent.
1.3.6.1.4.1.171.17.225.0.0.24
The commander switch will send esSingleIpMSPowerRecover notification to the indicated host when its member generates a power recover notification.
1.3.6.1.4.1.171.17.225.0.1.1
MacAddressRepresents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires MAC addresses to be transmitted most significant bit first. SIZE (6) · OCTET STRING · hint 1x:
The mac address that the member switch sent.
1.3.6.1.4.1.171.17.225.0.1.2
OCTET STRING SIZE (0..1024)
The string that the member switch sent.