This object controls when a storm control notification will be generated.
If the object is set to none(1): No notifications will be generated. stormOccurred(2): A notification will be generated when a storm event is detected. stormCleared(3): A notification will be generated when a storm event is cleared. both (4): A notification will be generated both when a storm event is
detected and cleared.
NOTE:The default value of this object is none(1).
esStormCtrlPollingInterval
1.3.6.1.4.1.171.17.25.1.1.2
Unsigned32 (5..600)
The interval, in seconds, the switch detects the storm.
esStormCtrlPollingRetries
1.3.6.1.4.1.171.17.25.1.1.3
Integer32 (-1 | 0 | 1..360)
Specify the retry count. If the action is configured as 'shutdown' mode and storm keep as long as interval * retries, the port will enters error-disabled state.
The effective range is from 1 to 360.
0 means that a 'shutdown' mode port will directly enter error-disabled state when storm is detected.
-1 means that a 'shutdown' mode port will never enter error-disabled state even if storm is detected.
esStormCtrlNotifyTrafficType
1.3.6.1.4.1.171.17.25.1.5.1
EsStormCtlTrafficType1 = broadcast2 = multicast3 = unicastThe type of storm control traffic type. broadcast(1) - broadcast storm. multicast(2) - including unknown L2 multicast, known L2 multicast, unknown IP multicast and known IP multicast. unicast(3) - when the action is configured as 'shutdown mode', unicast refers to both known and unknown unicast packet; Otherwise, unicast refers to unknown unicast packet. · Integer32
This object is used by esStormCtrlOccurred and esStormCtrlStormCleared to indicate the traffic type of the occurred storm.
Table details
esStormCtrlThresholdTable
1.3.6.1.4.1.171.17.25.1.2
Index: ifIndex · esStormCtrlTrafficType
A table consists of a list of interface-specific threshold configuration for storm control.
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
esStormCtrlTrafficType
1.3.6.1.4.1.171.17.25.1.2.1.1
EsStormCtlTrafficType1 = broadcast2 = multicast3 = unicastThe type of storm control traffic type. broadcast(1) - broadcast storm. multicast(2) - including unknown L2 multicast, known L2 multicast, unknown IP multicast and known IP multicast. unicast(3) - when the action is configured as 'shutdown mode', unicast refers to both known and unknown unicast packet; Otherwise, unicast refers to unknown unicast packet. · Integer32
This object indicates the traffic type of the entry.
esStormCtrlThresholdType
1.3.6.1.4.1.171.17.25.1.2.1.2
EsStormCtlThrType1 = pps2 = kbps3 = percentageThe type of storm control threshold is configured on an interface. pps(1) - the threshold is configured as packet count per second. kbps(2) - the threshold is configured as a rate of bits per second. percentage(3) - the threshold is configured as a percentage of total bandwidth per port. · Integer32
This object indicates the threshold type of the entry.
esStormCtrlRiseThresholdValue
1.3.6.1.4.1.171.17.25.1.2.1.3
EsStormCtlThrTypeValueDenotes a generic threshold value.
A EsStormCtlThrTypeValue value is always interpreted within the context of a EsStormCtlThrType value. Every usage of the EsStormCtlThrTypeValue textual convention is required to specify the EsStormCtlThrType object that provides the context. The unit and valid range are as follows:
Threshold Type Unit Valid Range
============= ===================== =================
pps packet per second 1 ~ 2147483647
kbps bits per second 1 ~ 2147483647
percentage percentage 1 ~ 100
The special value of -1 indicates this object is undefined. · Integer32
Specifies the rise threshold value of the entry. A special value of -1 indicates the storm control of the corresponding traffic type is not enabled on that interface.
esStormCtrlLowThresholdValue
1.3.6.1.4.1.171.17.25.1.2.1.4
EsStormCtlThrTypeValueDenotes a generic threshold value.
A EsStormCtlThrTypeValue value is always interpreted within the context of a EsStormCtlThrType value. Every usage of the EsStormCtlThrTypeValue textual convention is required to specify the EsStormCtlThrType object that provides the context. The unit and valid range are as follows:
Threshold Type Unit Valid Range
============= ===================== =================
pps packet per second 1 ~ 2147483647
kbps bits per second 1 ~ 2147483647
percentage percentage 1 ~ 100
The special value of -1 indicates this object is undefined. · Integer32
Specifies the low level threshold. A special value of -1 indicates low level is not specified. The default value will be 80% of the value of the corresponding esStormCtrlRiseThresholdValue if applicable.
esStormCtrlIfTable
1.3.6.1.4.1.171.17.25.1.3
Index: ifIndex
A table consists of a list of interface-specific configuration for storm control.
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
esStormCtrlIfActionType
1.3.6.1.4.1.171.17.25.1.3.1.1
INTEGER1 = none2 = shutdown3 = drop · Integer32
Specify the action will be taken when storm occurs: none(1) - Not filter the storm packets. shutdown(2) - The storm-control shutdown the port when the rise threshold is reached. drop(3) - The storm-control always discards packets that exceed the rise threshold.
esStormCtrlTrafficInfoTable
1.3.6.1.4.1.171.17.25.1.4
Index: ifIndex · esStormCtrlTrafficType
A table consists of a list of status information for traffic types on interfaces. Only the interface/traffic-type on which the storm control is enabled will present on this table.
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
esStormCtrlCurTrafficUnitType
1.3.6.1.4.1.171.17.25.1.4.1.1
EsStormCtlThrType1 = pps2 = kbps3 = percentageThe type of storm control threshold is configured on an interface. pps(1) - the threshold is configured as packet count per second. kbps(2) - the threshold is configured as a rate of bits per second. percentage(3) - the threshold is configured as a percentage of total bandwidth per port. · Integer32
This object indicates the current traffic unit of the entry.
esStormCtrlCurTrafficValue
1.3.6.1.4.1.171.17.25.1.4.1.2
EsStormCtlThrTypeValueDenotes a generic threshold value.
A EsStormCtlThrTypeValue value is always interpreted within the context of a EsStormCtlThrType value. Every usage of the EsStormCtlThrTypeValue textual convention is required to specify the EsStormCtlThrType object that provides the context. The unit and valid range are as follows:
Threshold Type Unit Valid Range
============= ===================== =================
pps packet per second 1 ~ 2147483647
kbps bits per second 1 ~ 2147483647
percentage percentage 1 ~ 100
The special value of -1 indicates this object is undefined. · Integer32
Indicating the current traffic value on the interface.
This object indicates the current status of storm control on a given interface for a given traffic type. forwarding(1): no storm event has been detected. dropped(2): a storm event has occurred and the storm traffic exceeding the threshold is dropped. errorDisabled(3): the port is disabled due to a storm. linkDown(4): the port is physically linked down. inactive(5): Indicates that storm control is not enabled for the given traffic type.
Trap details
esStormCtrlOccurred
1.3.6.1.4.1.171.17.25.0.1
This trap is sent when esStormCtrlNotifyEnable is 'stormOccurred' or 'both' and a storm is detected.
ifIndex
1.3.6.1.2.1.2.2.1.1
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
esStormCtrlNotifyTrafficType
1.3.6.1.4.1.171.17.25.1.5.1
EsStormCtlTrafficType1 = broadcast2 = multicast3 = unicastThe type of storm control traffic type. broadcast(1) - broadcast storm. multicast(2) - including unknown L2 multicast, known L2 multicast, unknown IP multicast and known IP multicast. unicast(3) - when the action is configured as 'shutdown mode', unicast refers to both known and unknown unicast packet; Otherwise, unicast refers to unknown unicast packet. · Integer32
This object is used by esStormCtrlOccurred and esStormCtrlStormCleared to indicate the traffic type of the occurred storm.
esStormCtrlStormCleared
1.3.6.1.4.1.171.17.25.0.2
This trap is sent when esStormCtrlNotifyEnable is 'stormCleared' or 'both' and a storm is cleared.
ifIndex
1.3.6.1.2.1.2.2.1.1
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
esStormCtrlNotifyTrafficType
1.3.6.1.4.1.171.17.25.1.5.1
EsStormCtlTrafficType1 = broadcast2 = multicast3 = unicastThe type of storm control traffic type. broadcast(1) - broadcast storm. multicast(2) - including unknown L2 multicast, known L2 multicast, unknown IP multicast and known IP multicast. unicast(3) - when the action is configured as 'shutdown mode', unicast refers to both known and unknown unicast packet; Otherwise, unicast refers to unknown unicast packet. · Integer32
This object is used by esStormCtrlOccurred and esStormCtrlStormCleared to indicate the traffic type of the occurred storm.