DLINKSW-CFM-EXT-MIB

Name	OID
dCfmAisNotifyEnabled	1.3.6.1.4.1.171.14.86.1.1.1
dCfmLockNotifyEnabled	1.3.6.1.4.1.171.14.86.1.1.2
dCfmCtrlCfmEnabled	1.3.6.1.4.1.171.14.86.1.2.1
dCfmCtrlCfmMpLtrAll	1.3.6.1.4.1.171.14.86.1.2.2
dCfmCtrlCfmCounterCcmDelete	1.3.6.1.4.1.171.14.86.1.2.3
dCfmEventMdIndex	1.3.6.1.4.1.171.14.86.1.5.1
dCfmEventMaIndex	1.3.6.1.4.1.171.14.86.1.5.2
dCfmEventMepIdentifier	1.3.6.1.4.1.171.14.86.1.5.3

Name	OID
dCfmCtrlCfmPortTable	1.3.6.1.4.1.171.14.86.1.2.4
dCfmCtrlCfmMaTable	1.3.6.1.4.1.171.14.86.1.2.5
dCfmCtrlCfmMepTable	1.3.6.1.4.1.171.14.86.1.2.6
dCfmCtrlCfmMipCcmTable	1.3.6.1.4.1.171.14.86.1.2.7
dCfmFaultMgmtTable	1.3.6.1.4.1.171.14.86.1.3.1
dCfmPmMepTable	1.3.6.1.4.1.171.14.86.1.4.1
dCfmPmLmResultTable	1.3.6.1.4.1.171.14.86.1.4.2
dCfmPmDmResultTable	1.3.6.1.4.1.171.14.86.1.4.3

Name	OID
dCfmAisOccurred	1.3.6.1.4.1.171.14.86.0.1
dCfmAisCleared	1.3.6.1.4.1.171.14.86.0.2
dCfmLockOccurred	1.3.6.1.4.1.171.14.86.0.3
dCfmLockCleared	1.3.6.1.4.1.171.14.86.0.4

dCfmCtrlCfmPortTable

1.3.6.1.4.1.171.14.86.1.2.4

Index: dCfmCtrlCfmPortIndex

A table contains of a list interface specific CFM configurations.

dCfmCtrlCfmPortIndex

1.3.6.1.4.1.171.14.86.1.2.4.1.1

InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d

This object indicates the ifIndex of the interface.

dCfmCtrlCfmPortEnabled

1.3.6.1.4.1.171.14.86.1.2.4.1.2

TruthValue1 = true2 = falseRepresents a boolean value. · Integer32

This object indicates the CFM state of the interface.

dCfmCtrlCfmPortPktRxAll

1.3.6.1.4.1.171.14.86.1.2.4.1.3

Counter32

This object indicates how many packets of all the CFM types have been received on the interface.

dCfmCtrlCfmPortPktRxCcm

1.3.6.1.4.1.171.14.86.1.2.4.1.4

Counter32

This object indicates how many CCM packets have been received on the interface.

dCfmCtrlCfmPortPktRxLbm

1.3.6.1.4.1.171.14.86.1.2.4.1.5

Counter32

This object indicates how many LBM (loopback message) packets have been received on the interface.

dCfmCtrlCfmPortPktRxLbr

1.3.6.1.4.1.171.14.86.1.2.4.1.6

Counter32

This object indicates how many LBR (loopback response) packets have been received on the interface.

dCfmCtrlCfmPortPktRxLtm

1.3.6.1.4.1.171.14.86.1.2.4.1.7

Counter32

This object indicates how many LTM (linktrace message) packets have been received on the interface.

dCfmCtrlCfmPortPktRxLtr

1.3.6.1.4.1.171.14.86.1.2.4.1.8

Counter32

This object indicates how many LTR (linktrace response) packets has been received on the interface.

dCfmCtrlCfmPortPktRxVidDrop

1.3.6.1.4.1.171.14.86.1.2.4.1.9

Counter32

This object indicates how many received packets are dropped out of the VLAN on the interface.

dCfmCtrlCfmPortPktRxOpcoDrop

1.3.6.1.4.1.171.14.86.1.2.4.1.10

Counter32

This object indicates how many received packets are dropped when cannot match the normal opcode on the interface.

dCfmCtrlCfmPortPktRxDelete

1.3.6.1.4.1.171.14.86.1.2.4.1.11

TruthValue1 = true2 = falseRepresents a boolean value. · Integer32

A Boolean flag set to true to delete the receiving packet counters on the interface. Reset to false by the device after the packet counters have been deleted.

dCfmCtrlCfmPortPktTxAll

1.3.6.1.4.1.171.14.86.1.2.4.1.12

Counter32

This object indicates how many packets of all the CFM types have been transmitted on the interface.

dCfmCtrlCfmPortPktTxCcm

1.3.6.1.4.1.171.14.86.1.2.4.1.13

Counter32

This object indicates how many CCM packets have been transmitted on the interface.

dCfmCtrlCfmPortPktTxLbm

1.3.6.1.4.1.171.14.86.1.2.4.1.14

Counter32

This object indicates how many LBM (loopback message) packets have been transmitted on the interface.

dCfmCtrlCfmPortPktTxLbr

1.3.6.1.4.1.171.14.86.1.2.4.1.15

Counter32

This object indicates how many LBR (loopback response) packets have been transmitted on the interface.

dCfmCtrlCfmPortPktTxLtm

1.3.6.1.4.1.171.14.86.1.2.4.1.16

Counter32

This object indicates how many LTM (linktrace message) packets have been transmitted on the interface.

dCfmCtrlCfmPortPktTxLtr

1.3.6.1.4.1.171.14.86.1.2.4.1.17

Counter32

This object indicates how many LTR (linktrace response) packets have been transmitted on the interface.

dCfmCtrlCfmPortPktTxDelete

1.3.6.1.4.1.171.14.86.1.2.4.1.18

TruthValue1 = true2 = falseRepresents a boolean value. · Integer32

A Boolean flag set to true to delete the transmitting packet counters on the interface. Reset to false by the device after the packet counters have been deleted.

dCfmCtrlCfmMaTable

1.3.6.1.4.1.171.14.86.1.2.5

Index: dot1agCfmMdIndex · dot1agCfmMaIndex

A table contains of a list of CFM mode configurations for MAs.

from IEEE8021-CFM-MIB

dot1agCfmMdIndex

Unsigned32 (1..4294967295)

The index to the Maintenance Domain table. dot1agCfmMdTableNextIndex needs to be inspected to find an available index for row-creation. Referential integrity is required, i.e., the index needs to be persistent upon a reboot or restart of a device. The index can never be reused for other Maintenance Domain. The index value SHOULD keep increasing up to the time that they wrap around. This is to facilitate access control based on OID.

dot1agCfmMaIndex

Unsigned32 (1..4294967295)

Index of the MA table dot1agCfmMdMaNextIndex needs to be inspected to find an available index for row-creation.

dCfmCtrlCfmMaMode

1.3.6.1.4.1.171.14.86.1.2.5.1.1

INTEGER1 = software2 = hardware · Integer32

This object indicates how CFM works in the MA. CFM hardware mode is used to improve the performance of CCM process. In CFM hardware mode, CCM packet is processed by hardware and CPU needs not be involved in general.

dCfmCtrlCfmMepTable

1.3.6.1.4.1.171.14.86.1.2.6

Index: dot1agCfmMdIndex · dot1agCfmMaIndex · dot1agCfmMepIdentifier

A table contains a list of MEP-specific CFM mode information.

from IEEE8021-CFM-MIB

dot1agCfmMdIndex

Unsigned32 (1..4294967295)

The index to the Maintenance Domain table. dot1agCfmMdTableNextIndex needs to be inspected to find an available index for row-creation. Referential integrity is required, i.e., the index needs to be persistent upon a reboot or restart of a device. The index can never be reused for other Maintenance Domain. The index value SHOULD keep increasing up to the time that they wrap around. This is to facilitate access control based on OID.

dot1agCfmMaIndex

Unsigned32 (1..4294967295)

Index of the MA table dot1agCfmMdMaNextIndex needs to be inspected to find an available index for row-creation.

dot1agCfmMepIdentifier

Dot1agCfmMepIdMaintenance association Endpoint Identifier (MEPID): A small integer, unique over a given Maintenance Association, identifying a specific MEP.Reference: 3.132, 19.2.1 (1..8191) · Unsigned32 · hint d

Integer that is unique among all the MEPs in the same MA. Other definition is: a small integer, unique over a given Maintenance Association, identifying a specific Maintenance association Endpoint (3.132). MEP Identifier is also known as the MEPID.

dCfmCtrlCfmMepMode

1.3.6.1.4.1.171.14.86.1.2.6.1.1

INTEGER1 = software2 = hardware · Integer32

This object indicates the CFM mode of the entry.

dCfmCtrlCfmMepXconCcm

1.3.6.1.4.1.171.14.86.1.2.6.1.2

Counter32

This object indicates how many Cross-connect CCMs have been received on the MEP.

dCfmCtrlCfmMepErrorCcm

1.3.6.1.4.1.171.14.86.1.2.6.1.3

Counter32

This object indicates how many invalid CCMs have been received on the MEP.

dCfmCtrlCfmMepNormalCcm

1.3.6.1.4.1.171.14.86.1.2.6.1.4

Counter32

This object indicates how many normal CCMs have been received on the MEP.

dCfmCtrlCfmMepLtDelete

1.3.6.1.4.1.171.14.86.1.2.6.1.5

TruthValue1 = true2 = falseRepresents a boolean value. · Integer32

A Boolean flag set to true to delete the linktrace responses. Reset to false by the device after the linktrace responses have been deleted.

dCfmCtrlCfmMipCcmTable

1.3.6.1.4.1.171.14.86.1.2.7

Index: dCfmCtrlCfmMipCcmVid · dCfmCtrlCfmMipCcmMacAddress

A table contains of a list of MIP CCM database entries.

dCfmCtrlCfmMipCcmVid

1.3.6.1.4.1.171.14.86.1.2.7.1.1

VlanIdThe VLAN-ID that uniquely identifies a VLAN. This is the 12-bit VLAN-ID used in the VLAN Tag header. The range is defined by the REFERENCEd specification.Reference: IEEE Std 802.1Q 2003 Edition, Virtual Bridged Local Area Networks. (1..4094) · Integer32 · hint d

This object indicates the VLAN ID of MIP CCM entry.

dCfmCtrlCfmMipCcmMacAddress

1.3.6.1.4.1.171.14.86.1.2.7.1.2

MacAddressRepresents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires MAC addresses to be transmitted most significant bit first. SIZE (6) · OCTET STRING · hint 1x:

This object indicates the MAC address of MIP CCM entry.

dCfmCtrlCfmMipCcmPort

1.3.6.1.4.1.171.14.86.1.2.7.1.3

InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d

This object indicates the interface of MIP CCM entry.

dCfmFaultMgmtTable

1.3.6.1.4.1.171.14.86.1.3.1

Index: dot1agCfmMdIndex · dot1agCfmMaIndex · dot1agCfmMepIdentifier

A table that contains a list configuration for fault management in MEPs.

from IEEE8021-CFM-MIB

dot1agCfmMdIndex

Unsigned32 (1..4294967295)

The index to the Maintenance Domain table. dot1agCfmMdTableNextIndex needs to be inspected to find an available index for row-creation. Referential integrity is required, i.e., the index needs to be persistent upon a reboot or restart of a device. The index can never be reused for other Maintenance Domain. The index value SHOULD keep increasing up to the time that they wrap around. This is to facilitate access control based on OID.

dot1agCfmMaIndex

Unsigned32 (1..4294967295)

Index of the MA table dot1agCfmMdMaNextIndex needs to be inspected to find an available index for row-creation.

dot1agCfmMepIdentifier

Dot1agCfmMepIdMaintenance association Endpoint Identifier (MEPID): A small integer, unique over a given Maintenance Association, identifying a specific MEP.Reference: 3.132, 19.2.1 (1..8191) · Unsigned32 · hint d

Integer that is unique among all the MEPs in the same MA. Other definition is: a small integer, unique over a given Maintenance Association, identifying a specific Maintenance association Endpoint (3.132). MEP Identifier is also known as the MEPID.

dCfmFaultMgmtAisEnabled

1.3.6.1.4.1.171.14.86.1.3.1.1.1

TruthValue1 = true2 = falseRepresents a boolean value. · Integer32

This object indicates the state of CFM AIS function. Setting this object to 'true' enables CFM AIS function.

dCfmFaultMgmtAisPeriod

1.3.6.1.4.1.171.14.86.1.3.1.1.2

INTEGER1 = oneSecond2 = oneMinute · Integer32

This object indicates the transmitting interval of the AIS PDU.

dCfmFaultMgmtAisLevel

1.3.6.1.4.1.171.14.86.1.3.1.1.3

Dot1agCfmMDLevelInteger identifying the Maintenance Domain Level (MD Level). Higher numbers correspond to higher Maintenance Domains, those with the greatest physical reach, with the highest values for customers' CFM PDUs. Lower numbers correspond to lower Maintenance Domains, those with more limited physical reach, with the lowest values for CFM PDUs protecting single Bridges or physical links.Reference: 18.3, 21.4.1 (0..7) · Integer32 · hint d

This object indicates the client level to which the MEP sends AIS PDU.

dCfmFaultMgmtAisStatus

1.3.6.1.4.1.171.14.86.1.3.1.1.4

INTEGER1 = detected2 = cleared · Integer32

This object indicates the status of AIS function.

dCfmFaultMgmtLockEnabled

1.3.6.1.4.1.171.14.86.1.3.1.1.5

TruthValue1 = true2 = falseRepresents a boolean value. · Integer32

This object indicates the CFM LCK (Locked Signal Function) state.

dCfmFaultMgmtLockPeriod

1.3.6.1.4.1.171.14.86.1.3.1.1.6

INTEGER1 = oneSecond2 = oneMinute · Integer32

This object indicates the transmitting interval of the LCK PDU.

dCfmFaultMgmtLockLevel

1.3.6.1.4.1.171.14.86.1.3.1.1.7

Dot1agCfmMDLevelInteger identifying the Maintenance Domain Level (MD Level). Higher numbers correspond to higher Maintenance Domains, those with the greatest physical reach, with the highest values for customers' CFM PDUs. Lower numbers correspond to lower Maintenance Domains, those with more limited physical reach, with the lowest values for CFM PDUs protecting single Bridges or physical links.Reference: 18.3, 21.4.1 (0..7) · Integer32 · hint d

This object indicates the client level to which the MEP sends the LCK PDU.

dCfmFaultMgmtLockStatus

1.3.6.1.4.1.171.14.86.1.3.1.1.8

INTEGER1 = detected2 = cleared · Integer32

This object indicates the status of CFM LCK function.

dCfmFaultMgmtLockCtrlAction

1.3.6.1.4.1.171.14.86.1.3.1.1.9

INTEGER1 = start2 = stop · Integer32

This object indicates the status of the CFM management lock action. Setting this object to 'start' or 'stop' to control the transmitting of LCK PDUs to a client level MEP.

dCfmPmMepTable

1.3.6.1.4.1.171.14.86.1.4.1

Index: dot1agCfmMdIndex · dot1agCfmMaIndex · dot1agCfmMepIdentifier

A table that contains CFM performance monitoring configuration and information of MEPs. CFM performance monitoring includes frame loss measurement (ETH-LM) and frame delay measurement (ETH-DM).

from IEEE8021-CFM-MIB

dot1agCfmMdIndex

Unsigned32 (1..4294967295)

The index to the Maintenance Domain table. dot1agCfmMdTableNextIndex needs to be inspected to find an available index for row-creation. Referential integrity is required, i.e., the index needs to be persistent upon a reboot or restart of a device. The index can never be reused for other Maintenance Domain. The index value SHOULD keep increasing up to the time that they wrap around. This is to facilitate access control based on OID.

dot1agCfmMaIndex

Unsigned32 (1..4294967295)

Index of the MA table dot1agCfmMdMaNextIndex needs to be inspected to find an available index for row-creation.

dot1agCfmMepIdentifier

Dot1agCfmMepIdMaintenance association Endpoint Identifier (MEPID): A small integer, unique over a given Maintenance Association, identifying a specific MEP.Reference: 3.132, 19.2.1 (1..8191) · Unsigned32 · hint d

Integer that is unique among all the MEPs in the same MA. Other definition is: a small integer, unique over a given Maintenance Association, identifying a specific Maintenance association Endpoint (3.132). MEP Identifier is also known as the MEPID.

dCfmPmMepLmEnabled

1.3.6.1.4.1.171.14.86.1.4.1.1.1

TruthValue1 = true2 = falseRepresents a boolean value. · Integer32

This object indicates the administrative state of frame loss measurement function in a MEP.

dCfmPmMepLmDestMacAddress

1.3.6.1.4.1.171.14.86.1.4.1.1.2

MacAddressRepresents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires MAC addresses to be transmitted most significant bit first. SIZE (6) · OCTET STRING · hint 1x:

This object indicates the target unicast MAC address field to be transmitted in a frame loss measurement test.

dCfmPmMepLmPeriod

1.3.6.1.4.1.171.14.86.1.4.1.1.3

INTEGER1 = period100ms2 = period1sec3 = period10sec · Integer32

This object indicates the transmission period of LMM message in a frame loss measurement test.

dCfmPmMepLmPriority

1.3.6.1.4.1.171.14.86.1.4.1.1.4

Unsigned32 (0..7)

This object indicates the pdu prioirty of LMM message in a frame loss measurement test. It also determines the CoS instance with which the frame loss measurement test is specified. The default value is MEP priority.

dCfmPmMepLmTestStatus

1.3.6.1.4.1.171.14.86.1.4.1.1.5

TruthValue1 = true2 = falseRepresents a boolean value. · Integer32

A Boolean flag set to true to start a frame loss measurement test. Reset to false by the device after the frame loss measurement test has been ended.

dCfmPmMepLmResultsDelete

1.3.6.1.4.1.171.14.86.1.4.1.1.6

TruthValue1 = true2 = falseRepresents a boolean value. · Integer32

A Boolean flag set to true to delete the frame loss measurement results. Reset to false by the device after the frame loss measurement results has been deleted.

dCfmPmMepLmStatisticsDelete

1.3.6.1.4.1.171.14.86.1.4.1.1.7

TruthValue1 = true2 = falseRepresents a boolean value. · Integer32

A Boolean flag set to true to delete the statistics of ETH-LM frames (LMM, LMR). Reset to 'false' by the device after the statistics of ETH-LM frames has been cleared.

dCfmPmMepLmResults

1.3.6.1.4.1.171.14.86.1.4.1.1.8

Counter32

This object indicates how many the frame loss measurement results exist.

dCfmPmMepLmPduLmmTransmitted

1.3.6.1.4.1.171.14.86.1.4.1.1.9

Counter32

This object indicates how many LMM messages has been transmitted on the MEP.

dCfmPmMepLmPduLmrReceived

1.3.6.1.4.1.171.14.86.1.4.1.1.10

Counter32

This object indicates how many LMR messages has been received on the MEP.

dCfmPmMepLmPduLmmReceived

1.3.6.1.4.1.171.14.86.1.4.1.1.11

Counter32

This object indicates how many LMM messages has been received on the MEP.

dCfmPmMepLmPduLmrTransmitted

1.3.6.1.4.1.171.14.86.1.4.1.1.12

Counter32

This object indicates how many LMR messages has been transmitted on the MEP.

dCfmPmMepDmEnabled

1.3.6.1.4.1.171.14.86.1.4.1.1.13

TruthValue1 = true2 = falseRepresents a boolean value. · Integer32

This object indicates the administrative state of frame delay measurement function.

dCfmPmMepDmDestMacAddress

1.3.6.1.4.1.171.14.86.1.4.1.1.14

MacAddressRepresents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires MAC addresses to be transmitted most significant bit first. SIZE (6) · OCTET STRING · hint 1x:

This object indicates the target unicast MAC address field to be transmitted in a frame delay measurement test.

dCfmPmMepDmPeriodInterval

1.3.6.1.4.1.171.14.86.1.4.1.1.15

INTEGER1 = period100msInterval1sec2 = period1secInterval10sec3 = period10secInterval1min · Integer32

This object indicates the transmission period of DMM message and the diagnostic interval in a frame delay measurement test.

dCfmPmMepDmPercentile

1.3.6.1.4.1.171.14.86.1.4.1.1.16

Unsigned32 (0..100)

This object indicates the percentile of frame delay and frame delay variation measurement.

dCfmPmMepDmPriority

1.3.6.1.4.1.171.14.86.1.4.1.1.17

Unsigned32 (0..7)

This object indicates the PDU prioirty of DMM message in a delay measurement test. It also decides the CoS instance with which the frame delay measurement test is specified. The default value is MEP priority.

dCfmPmMepDmTestStatus

1.3.6.1.4.1.171.14.86.1.4.1.1.18

TruthValue1 = true2 = falseRepresents a boolean value. · Integer32

A Boolean flag set to true to start a frame delay measurement test. Reset to false by the device after the frame delay measurement test has been ended.

dCfmPmMepDmResultsDelete

1.3.6.1.4.1.171.14.86.1.4.1.1.19

TruthValue1 = true2 = falseRepresents a boolean value. · Integer32

A Boolean flag set to true to delete the frame delay measurement results. Reset to false by the device after the frame delay measurement results has been deleted.

dCfmPmMepDmStatisticsDelete

1.3.6.1.4.1.171.14.86.1.4.1.1.20

TruthValue1 = true2 = falseRepresents a boolean value. · Integer32

A Boolean flag set to true to delete the statistics of ETH-DM frames (DMM, DMR). Reset to false by the device after the statistics of ETH-DM frames has been cleared.

dCfmPmMepDmResults

1.3.6.1.4.1.171.14.86.1.4.1.1.21

Counter32

This object indicates how many the frame delay measurement results exist.

dCfmPmMepDmPduDmmTransmitted

1.3.6.1.4.1.171.14.86.1.4.1.1.22

Counter32

This object indicates how many DMM messages has been transmitted on the MEP.

dCfmPmMepDmPduDmrReceived

1.3.6.1.4.1.171.14.86.1.4.1.1.23

Counter32

This object indicates how many DMR messages has been received on the MEP.

dCfmPmMepDmPduDmmReceived

1.3.6.1.4.1.171.14.86.1.4.1.1.24

Counter32

This object indicates how many DMM messages has been received on the MEP.

dCfmPmMepDmPduDmrTransmitted

1.3.6.1.4.1.171.14.86.1.4.1.1.25

Counter32

This object indicates how many DMR messages has been transmitted on the MEP.

dCfmPmLmResultTable

1.3.6.1.4.1.171.14.86.1.4.2

Index: dot1agCfmMdIndex · dot1agCfmMaIndex · dot1agCfmMepIdentifier · dCfmPmLmIdentifier

A table that contains a list of configuration and information of CFM frame loss measurement tests. When the test results are deleted for the MEP, the corresponding entries will be removed.

from IEEE8021-CFM-MIB

dot1agCfmMdIndex

Unsigned32 (1..4294967295)

The index to the Maintenance Domain table. dot1agCfmMdTableNextIndex needs to be inspected to find an available index for row-creation. Referential integrity is required, i.e., the index needs to be persistent upon a reboot or restart of a device. The index can never be reused for other Maintenance Domain. The index value SHOULD keep increasing up to the time that they wrap around. This is to facilitate access control based on OID.

dot1agCfmMaIndex

Unsigned32 (1..4294967295)

Index of the MA table dot1agCfmMdMaNextIndex needs to be inspected to find an available index for row-creation.

dot1agCfmMepIdentifier

Dot1agCfmMepIdMaintenance association Endpoint Identifier (MEPID): A small integer, unique over a given Maintenance Association, identifying a specific MEP.Reference: 3.132, 19.2.1 (1..8191) · Unsigned32 · hint d

Integer that is unique among all the MEPs in the same MA. Other definition is: a small integer, unique over a given Maintenance Association, identifying a specific Maintenance association Endpoint (3.132). MEP Identifier is also known as the MEPID.

dCfmPmLmIdentifier

1.3.6.1.4.1.171.14.86.1.4.2.1.1

Unsigned32 (1..4294967295)

An integer value uniquely identifying the entry in the table.

dCfmPmLmDestMacAddress

1.3.6.1.4.1.171.14.86.1.4.2.1.2

MacAddressRepresents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires MAC addresses to be transmitted most significant bit first. SIZE (6) · OCTET STRING · hint 1x:

This object indicates the target unicast MAC address in a frame loss measurement result.

dCfmPmLmPeriod

1.3.6.1.4.1.171.14.86.1.4.2.1.3

INTEGER1 = period100ms2 = period1sec3 = period10sec · Integer32

This object indicates the transmission period of LMM message in a frame loss measurement result.

dCfmPmLmPriority

1.3.6.1.4.1.171.14.86.1.4.2.1.4

Unsigned32 (0..7)

This object indicates the priority of the ETH-LM frames (LMM, LMR) in the frame loss measurement result.

dCfmPmLmStatus

1.3.6.1.4.1.171.14.86.1.4.2.1.5

INTEGER1 = running2 = success3 = failed4 = aborted · Integer32

This object indicates the status in the frame loss measurement result.

dCfmPmLmFarEnd

1.3.6.1.4.1.171.14.86.1.4.2.1.6

Integer32 (-1..100)

This object indicates the far-end Frame Loss Ratio (FLR) which is expressed as a percentage. It is valid when the status of the frame loss measurement result is success. The value is expressed as a percentage except that the value -1 indicates the result is not applicable.

dCfmPmLmNearEnd

1.3.6.1.4.1.171.14.86.1.4.2.1.7

Integer32 (-1..100)

This object indicates the near-end frame loss measurement result. It is valid when the status of the frame loss measurement result is success. The value is expressed as a percentage except that the value -1 indicates the result is not applicable.

dCfmPmLmStartTime

1.3.6.1.4.1.171.14.86.1.4.2.1.8

DateAndTimeA date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC* 0..13 10 11 minutes from UTC 0..59 * Notes: - the value of year is in network-byte order - daylight saving time in New Zealand is +13 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 Note that if only local time is known, then timezone information (fields 8-10) is not present. SIZE (8 | 11) · OCTET STRING · hint 2d-1d-1d,1d:1d:1d.1d,1a1d:1d

This object indicates the time at which the loss measurement test start.

dCfmPmDmResultTable

1.3.6.1.4.1.171.14.86.1.4.3

Index: dot1agCfmMdIndex · dot1agCfmMaIndex · dot1agCfmMepIdentifier · dCfmPmDmIdentifier

A table that contains a list of configuration and information of frame delay measurement result. When the test results are deleted for the MEP, the corresponding entries will be removed.

from IEEE8021-CFM-MIB

dot1agCfmMdIndex

Unsigned32 (1..4294967295)

The index to the Maintenance Domain table. dot1agCfmMdTableNextIndex needs to be inspected to find an available index for row-creation. Referential integrity is required, i.e., the index needs to be persistent upon a reboot or restart of a device. The index can never be reused for other Maintenance Domain. The index value SHOULD keep increasing up to the time that they wrap around. This is to facilitate access control based on OID.

dot1agCfmMaIndex

Unsigned32 (1..4294967295)

Index of the MA table dot1agCfmMdMaNextIndex needs to be inspected to find an available index for row-creation.

dot1agCfmMepIdentifier

Dot1agCfmMepIdMaintenance association Endpoint Identifier (MEPID): A small integer, unique over a given Maintenance Association, identifying a specific MEP.Reference: 3.132, 19.2.1 (1..8191) · Unsigned32 · hint d

Integer that is unique among all the MEPs in the same MA. Other definition is: a small integer, unique over a given Maintenance Association, identifying a specific Maintenance association Endpoint (3.132). MEP Identifier is also known as the MEPID.

dCfmPmDmIdentifier

1.3.6.1.4.1.171.14.86.1.4.3.1.1

Unsigned32 (1..4294967295)

An integer value uniquely identifying the entry in the table.

dCfmPmDmDestMacAddress

1.3.6.1.4.1.171.14.86.1.4.3.1.2

MacAddressRepresents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires MAC addresses to be transmitted most significant bit first. SIZE (6) · OCTET STRING · hint 1x:

This object indicates the target unicast MAC address field to be transmitted in a frame delay measurement result.

dCfmPmDmPeriodInterval

1.3.6.1.4.1.171.14.86.1.4.3.1.3

INTEGER1 = period100msInterval1sec2 = period1secInterval10sec3 = period10secInterval1min · Integer32

This object indicates the transmission period of DMM message and the diagnostic interval in a frame delay measurement result.

dCfmPmDmPercentile

1.3.6.1.4.1.171.14.86.1.4.3.1.4

Unsigned32 (0..100)

This object indicates the percentile of frame delay and frame delay variation measurement.

dCfmPmDmPriority

1.3.6.1.4.1.171.14.86.1.4.3.1.5

Unsigned32 (0..7)

This object indicates the priority of the ETH-DM frames (DMM, DMR) in the frame delay measurement result.

dCfmPmDmStatus

1.3.6.1.4.1.171.14.86.1.4.3.1.6

INTEGER1 = running2 = success3 = failed4 = aborted · Integer32

This object indicates the status in the frame delay measurement result.

dCfmPmDmFrameDelay

1.3.6.1.4.1.171.14.86.1.4.3.1.7

CounterBasedGauge64The CounterBasedGauge64 type represents a non-negative integer, which may increase or decrease, but shall never exceed a maximum value, nor fall below a minimum value. The maximum value can not be greater than 2^64-1 (18446744073709551615 decimal), and the minimum value can not be smaller than 0. The value of a CounterBasedGauge64 has its maximum value whenever the information being modeled is greater than or equal to its maximum value, and has its minimum value whenever the information being modeled is smaller than or equal to its minimum value. If the information being modeled subsequently decreases below (increases above) the maximum (minimum) value, the CounterBasedGauge64 also decreases (increases). Note that this TC is not strictly supported in SMIv2, because the 'always increasing' and 'counter wrap' semantics associated with the Counter64 base type are not preserved. It is possible that management applications which rely solely upon the (Counter64) ASN.1 tag to determine object semantics will mistakenly operate upon objects of this type as they would for Counter64 objects. This textual convention represents a limited and short-term solution, and may be deprecated as a long term solution is defined and deployed to replace it. (0..18446744073709551615) · Counter64

This object indicates the frame delay value (nanoseconds) in the frame delay measurement result.

dCfmPmDmDelayVariation

1.3.6.1.4.1.171.14.86.1.4.3.1.8

CounterBasedGauge64The CounterBasedGauge64 type represents a non-negative integer, which may increase or decrease, but shall never exceed a maximum value, nor fall below a minimum value. The maximum value can not be greater than 2^64-1 (18446744073709551615 decimal), and the minimum value can not be smaller than 0. The value of a CounterBasedGauge64 has its maximum value whenever the information being modeled is greater than or equal to its maximum value, and has its minimum value whenever the information being modeled is smaller than or equal to its minimum value. If the information being modeled subsequently decreases below (increases above) the maximum (minimum) value, the CounterBasedGauge64 also decreases (increases). Note that this TC is not strictly supported in SMIv2, because the 'always increasing' and 'counter wrap' semantics associated with the Counter64 base type are not preserved. It is possible that management applications which rely solely upon the (Counter64) ASN.1 tag to determine object semantics will mistakenly operate upon objects of this type as they would for Counter64 objects. This textual convention represents a limited and short-term solution, and may be deprecated as a long term solution is defined and deployed to replace it. (0..18446744073709551615) · Counter64

This object indicates the frame delay variation value (nanoseconds) in the frame delay measurement result.

dCfmPmDmStartTime

1.3.6.1.4.1.171.14.86.1.4.3.1.9

DateAndTimeA date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC* 0..13 10 11 minutes from UTC 0..59 * Notes: - the value of year is in network-byte order - daylight saving time in New Zealand is +13 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 Note that if only local time is known, then timezone information (fields 8-10) is not present. SIZE (8 | 11) · OCTET STRING · hint 2d-1d-1d,1d:1d:1d.1d,1a1d:1d

This object indicates the time at which the delay measurement test start.

DLINKSW-CFM-EXT-MIB

Scalars (8)

Tables (8)

Traps (4)

Scalar details

dCfmAisNotifyEnabled

dCfmLockNotifyEnabled

dCfmCtrlCfmEnabled

dCfmCtrlCfmMpLtrAll

dCfmCtrlCfmCounterCcmDelete

dCfmEventMdIndex

dCfmEventMaIndex

dCfmEventMepIdentifier

Table details

dCfmCtrlCfmPortTable

dCfmCtrlCfmPortIndex

dCfmCtrlCfmPortEnabled

dCfmCtrlCfmPortPktRxAll

dCfmCtrlCfmPortPktRxCcm

dCfmCtrlCfmPortPktRxLbm

dCfmCtrlCfmPortPktRxLbr

dCfmCtrlCfmPortPktRxLtm

dCfmCtrlCfmPortPktRxLtr

dCfmCtrlCfmPortPktRxVidDrop

dCfmCtrlCfmPortPktRxOpcoDrop

dCfmCtrlCfmPortPktRxDelete

dCfmCtrlCfmPortPktTxAll

dCfmCtrlCfmPortPktTxCcm

dCfmCtrlCfmPortPktTxLbm

dCfmCtrlCfmPortPktTxLbr

dCfmCtrlCfmPortPktTxLtm

dCfmCtrlCfmPortPktTxLtr

dCfmCtrlCfmPortPktTxDelete

dCfmCtrlCfmMaTable

dot1agCfmMdIndex

dot1agCfmMaIndex

dCfmCtrlCfmMaMode

dCfmCtrlCfmMepTable

dot1agCfmMdIndex

dot1agCfmMaIndex

dot1agCfmMepIdentifier

dCfmCtrlCfmMepMode

dCfmCtrlCfmMepXconCcm

dCfmCtrlCfmMepErrorCcm

dCfmCtrlCfmMepNormalCcm

dCfmCtrlCfmMepLtDelete

dCfmCtrlCfmMipCcmTable

dCfmCtrlCfmMipCcmVid

dCfmCtrlCfmMipCcmMacAddress

dCfmCtrlCfmMipCcmPort

dCfmFaultMgmtTable

dot1agCfmMdIndex

dot1agCfmMaIndex

dot1agCfmMepIdentifier

dCfmFaultMgmtAisEnabled

dCfmFaultMgmtAisPeriod

dCfmFaultMgmtAisLevel

dCfmFaultMgmtAisStatus

dCfmFaultMgmtLockEnabled

dCfmFaultMgmtLockPeriod

dCfmFaultMgmtLockLevel

dCfmFaultMgmtLockStatus

dCfmFaultMgmtLockCtrlAction

dCfmPmMepTable

dot1agCfmMdIndex

dot1agCfmMaIndex

dot1agCfmMepIdentifier

dCfmPmMepLmEnabled

dCfmPmMepLmDestMacAddress

dCfmPmMepLmPeriod

dCfmPmMepLmPriority

dCfmPmMepLmTestStatus

dCfmPmMepLmResultsDelete

dCfmPmMepLmStatisticsDelete

dCfmPmMepLmResults

dCfmPmMepLmPduLmmTransmitted

dCfmPmMepLmPduLmrReceived

dCfmPmMepLmPduLmmReceived

dCfmPmMepLmPduLmrTransmitted

dCfmPmMepDmEnabled