This MIB module defines a portion of the SNMP MIB under the Enterasys Networks enterprise OID pertaining to proprietary extensions to the IEEE8021-Q-BRIDGE-MIB.
Indicates the values of maximum number of entries supported by the hardware. The possible values are as follows: fdbMaxNumEntries4K(0) - The maximum number of entries in the filter database is 4K (4096).
fdbMaxNumEntries8K(1) - The maximum number of entries in the filter database is 8K (8192).
fdbMaxNumEntries16K(2) - The maximum number of entries in the filter database is 16K (16384).
fdbMaxNumEntries32K(3) - The maximum number of entries in the filter database is 32K (32768).
fdbMaxNumEntries64K(4) - The maximum number of entries in the filter database is 64K (65536).
fdbMaxNumEntries128K(5) - The maximum number of entries in the filter database is 128K (131072).
etsysIeee8021QBridgeFdbMaxNumEntries
1.3.6.1.4.1.5624.1.2.88.1.3.1.2
EtsysIeee8021QBridgeFdbEntries4096 = is4K8192 = is8K16384 = is16K32768 = is32K65536 = is64K131072 = is128KInteger that especifies the maximum number of entries in the filter database. · Integer32
Indicates the configured maximum number of entries in the filter database.
etsysIeee8021QBridgeFdbOperMaxNumEntries
1.3.6.1.4.1.5624.1.2.88.1.3.1.3
EtsysIeee8021QBridgeFdbEntries4096 = is4K8192 = is8K16384 = is16K32768 = is32K65536 = is64K131072 = is128KInteger that especifies the maximum number of entries in the filter database. · Integer32
Indicates the operational maximum number of entries in the filter database.
A table containing per VLAN control and status information for MVRP VLAN configuration in the device.
etsysIeee8021QVlanMvrpRestrictedComponentId
1.3.6.1.4.1.5624.1.2.88.1.1.1.1.1
IEEE8021PbbComponentIdentifierThe component identifier is used to distinguish between the multiple virtual Bridge instances within a PB or PBB. Each virtual Bridge instance is called a component. In simple situations where there is only a single component the default value is 1. The component is identified by a component identifier unique within the BEB and by a MAC address unique within the PBBN. Each component is associated with a Backbone Edge Bridge (BEB) Configuration managed object.Reference: 12.3 l) (1..4294967295) · Unsigned32 · hint d
The PBB component identifier to which this entry's restricted MVRP VLAN attribute status applies.
etsysIeee8021QVlanMvrpRestrictedIndex
1.3.6.1.4.1.5624.1.2.88.1.1.1.1.2
IEEE8021VlanIndexA value used to index per-VLAN tables: values of 0 and 4095 are not permitted. If the value is between 1 and 4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with global scope within a given bridged domain (see VlanId textual convention). If the value is greater than 4095, then it represents a VLAN with scope local to the particular agent, i.e., one without a global VLAN-ID assigned to it. Such VLANs are outside the scope of IEEE 802.1Q, but it is convenient to be able to manage them in the same way using this MIB.Reference: 9.6 (1..4094 | 4096..4294967295) · Unsigned32 · hint d
The VLAN to which this entry's restricted MVRP VLAN attribute status applies.
etsysIeee8021QVlanMvrpRestrictedStatus
1.3.6.1.4.1.5624.1.2.88.1.1.1.1.3
EnabledStatus1 = enabled2 = disabledA simple status value for the object. · Integer32
The state of restricted MVRP operation for this VLAN. The value enabled(1) indicates that restricted MVRP operation is enabled for this VLAN. This object affects MVRP Applicant and Registrar state machines for this VLAN on all ports. If restricted MVRP is enabled for a VLAN the following rules are applied:
1. If MVRP is globally enabled and
2. If MVRP is enabled at the port level, then
3. Any ports that were members of the dot1qVlanCurrentEgressPorts table due to MVRP will signal to remove this registration and no further registration requests received in MVRP PDUs for this VLAN will be processed and
4. Any ports that were propagating registration information for this VLAN will cease propagation and all further MVRP PDUs transmitted after the initial withdrawal attempt will not include event notifications for this VLAN.
IEEE8021PbbComponentIdentifierThe component identifier is used to distinguish between the multiple virtual Bridge instances within a PB or PBB. Each virtual Bridge instance is called a component. In simple situations where there is only a single component the default value is 1. The component is identified by a component identifier unique within the BEB and by a MAC address unique within the PBBN. Each component is associated with a Backbone Edge Bridge (BEB) Configuration managed object.Reference: 12.3 l) (1..4294967295) · Unsigned32 · hint d
The component identifier is used to distinguish between the multiple virtual Bridge instances within a PBB. In simple situations where there is only a single component the default value is 1.
ieee8021BridgeBasePort
IEEE8021BridgePortNumberAn integer that uniquely identifies a Bridge Port, as specified in 17.3.2.2. This value is used within the spanning tree protocol to identify this port to neighbor Bridges.Reference: 17.3.2.2 (1..65535) · Unsigned32 · hint d
Reference: 12.4.2.1
The port number of the port for which this entry contains Bridge management information.
Counter64 (0..18446744073709551615) · MVRP receive VID translation errors
The total number of receive errors for MVRP due to an incompatible VID translation configuration on a port.
This error occurs when an MVRPDU is received on a port which has a VID translation table configured and the MVRPDU contains messages for multiple local VIDs that map to the same relay VID. The MVRPDU is discarded when this error is detected.
Counter64 (0..18446744073709551615) · MVRP transmit VID translation errors
The total number of transmit errors for MVRP due to an incompatible VID translation configuration on a port.
This error occurs when an MVRPDU is being encoded for transmit on a port which has a VID translation table configured and the MVRPDU has messages for multiple local VIDs that map to the same relay VID. The MVRPDU is discarded when this error occurs.