EZ5 MIB Catalog

ENTERASYS-IF-MIB-EXT-MIB

2015-04-14

This MIB module defines a portion of the SNMP MIB under the Enterasys Networks enterprise OID that provide extensions to the industry standard IF-MIB.

Download ENTERASYS-IF-MIB-EXT-MIB.txt Open ENTERASYS-IF-MIB-EXT-MIB.txt in a new tab

SCALARS (1) · TABLES (1)

Scalars (1)

NameOID
etsysIfOperStateLinkChange1.3.6.1.4.1.5624.1.2.57.1.1.1

Tables (1)

NameOID
etsysInterfaceExtTableaugments ifTable (IF-MIB)1.3.6.1.4.1.5624.1.2.57.1.2.1

END OF TOC

Scalar details

etsysIfOperStateLinkChange

1.3.6.1.4.1.5624.1.2.57.1.1.1

EnabledStatus1 = enabled2 = disabledA simple status value for the object. · Integer32

This object controls the system wide ability to manipulate the physical link state of an interface when the interface's ifOperStatus transitions into or out of the down(2) state. A value of enabled(1) will cause an interface to drop physical link when its ifOperStatus transitions to down(2). If the interface would transition out of the down(2) state, assuming it did have link, then physical link will be restored to the interface. A value of disabled(2) will cause an interface to not alter its physical link regardless of the value of ifOperStatus. This object only affects those interfaces which have a concept of physical link.

Table details

etsysInterfaceExtTable

1.3.6.1.4.1.5624.1.2.57.1.2.1

augments ifTable (IF-MIB)

Index: ifIndex

A table of per interface information that extends the base ifTable defined in RFC2863.

from IF-MIB

ifIndex

InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d

A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.

etsysIfOperStatusCause

1.3.6.1.4.1.5624.1.2.57.1.2.1.1.1

EtsysIfOperStatusCausesThis convention specifies the variety of functionalities that may cause an interface's ifOperStatus to be have a value other than up(1). A set bit indicates that the associated cause is influencing the interface's current ifOperStatus. adminStatus(0) - The ifAdminStatus for the interface is not up(1). linkLoss(1) - The interface has physically lost link with its partner. linkFlap(2) - The interface has been brought down by the Link Flap feature as defined by etsysLinkFlapMIB. self(3) - The interface has brought itself down. initialization(4) - The system or interface is still in the process of initializing itself. flowLimiting(5) - The interface has been brought down by the Flow Limiting feature as defined by etsysFlowLimitingMIB. policy(6) - The interface has been brought down by the Policy feature as defined by etsysPolicyProfileMIB. classOfService(7) - The interface has been brought down by the rate limiting feature defined by etsysCosMIB. ieee8021x(8) - The interface has been made dormant awaiting successful authentication by 802.1X. ieee8023lag(9) - The interface has been made dormant as a result of being an underlying physical port in a Link Aggregation. enetOam(10) - The interface has been brought down by the Ethernet OAM feature as defined by etsysEthOamExtMIB. enetOamLb(11) - The interface has been brought down by the Ethernet OAM loopback feature as defined by dot3OamMIB. macLock(12) - The interface has been brought down by the MAC Lock feature as defined in etsysMACLockingMIB. chassisBonding(13) - The interface has been brought down by the Chassis Bonding feature as defined in etsysVirtualSwitchBondingMIB. linkState(14) - The interface has been brought down by the Link-state application as defined in etsysLinkstateMIB. enetOamUld(15) - The interface has been brought down by the Ethernet OAM Unidirectional Link Detection (ULD) feature as defined by etsysEthOamExtMIB. txqMonitor(16) - The interface has been brought down by the Transmit Queue Monitor feature as defined in etsysTxqMonitorMIB. priorityFlowControl(17) - The interface has been brought down by the Priority Flow Control feature as defined in ieee8021PFCMib as it undergoes temporary buffer changes. macSec(18) - The interface has been brought down by the MACsec feature as defined by IEEE802.1X-2010 port based Network Access Control.Reference: RFC 2863, 'The Interfaces Group MIB' ENTERASYS-LINK-FLAP-MIB ENTERASYS-FLOW-LIMITING-MIB ENTERASYS-POLICY-PROFILE-MIB ENTERASYS-CLASS-OF-SERVICE-MIB ENTERASYS-ETH-OAM-EXT-MIB ENTERASYS-MAC-LOCKING-MIB IEEE Std. 802.1X-2001 IEEE Std. 802.3-2002 ENTERASYS-VIRTUAL-SWITCH-BONDING-MIB ENTERASYS-LINKSTATE-MIB ENTERASYS-ETH-OAM-EXT-MIB ENTERASYS-TRANSMIT-QUEUE-MONITOR-MIB IEEE Std. 802.1Qbb-2011 IEEE Std. 802.1X-2010 · BITS

This object indicates the various features that could cause the ifOperStatus of an interface to not be up(1).

↑ To TOC