ResourceUtilizationThis data type is used as the syntax for objects which report the utilization of a resource as a percentage of a defined period of time. Each value embeds the first digit to the right of the decimal, 1/10ths of a percent, by multiplying the utilization by 10. For example, a utilization of 95.7 encodes to a ResourceUtilization value of 957. (0..1000) · Integer32
The threshold for generating
etsysResourceLoad1minThresholdExceeded Notifications.
Setting this object to 0 will prevent the agent from generating etsysResourceCpuLoad1minThresholdExceeded notifications.
When this object is set to a nonzero value, the agent will generate etsysResourceLoad1minThresholdExceeded notifications when it is detected that an etsysResourceCpuLoad1min object value has exceeded this threshold value. After the threshold has been exceeded additional notifications will be sent once a minute until the corresponding etsysResourceCpuLoad1min drops back below the threshold.
PhysicalIndexAn arbitrary value that uniquely identifies the physical entity. The value should be a small positive integer. Index values for different physical entities are not necessarily contiguous. (1..2147483647) · Integer32 · hint d
The index for this entry.
etsysResourceCpuId
1.3.6.1.4.1.5624.1.2.49.1.1.1.1.1
Unsigned32
A value assigned to the processor. Each value needs only to be unique for the module identified by the entPhysicalIndex of this entry.
etsysResourceCpuLoad5sec
1.3.6.1.4.1.5624.1.2.49.1.1.1.1.2
ResourceUtilizationThis data type is used as the syntax for objects which report the utilization of a resource as a percentage of a defined period of time. Each value embeds the first digit to the right of the decimal, 1/10ths of a percent, by multiplying the utilization by 10. For example, a utilization of 95.7 encodes to a ResourceUtilization value of 957. (0..1000) · Integer32
The average, over the last 5 seconds, of the percentage of time that this processor was not idle.
etsysResourceCpuLoad1min
1.3.6.1.4.1.5624.1.2.49.1.1.1.1.3
ResourceUtilizationThis data type is used as the syntax for objects which report the utilization of a resource as a percentage of a defined period of time. Each value embeds the first digit to the right of the decimal, 1/10ths of a percent, by multiplying the utilization by 10. For example, a utilization of 95.7 encodes to a ResourceUtilization value of 957. (0..1000) · Integer32
The average, over the last 1 minute, of the percentage of time that this processor was not idle.
etsysResourceCpuLoad5min
1.3.6.1.4.1.5624.1.2.49.1.1.1.1.4
ResourceUtilizationThis data type is used as the syntax for objects which report the utilization of a resource as a percentage of a defined period of time. Each value embeds the first digit to the right of the decimal, 1/10ths of a percent, by multiplying the utilization by 10. For example, a utilization of 95.7 encodes to a ResourceUtilization value of 957. (0..1000) · Integer32
The average, over the last 5 minutes, of the percentage of time that this processor was not idle.
PhysicalIndexAn arbitrary value that uniquely identifies the physical entity. The value should be a small positive integer. Index values for different physical entities are not necessarily contiguous. (1..2147483647) · Integer32 · hint d
The index for this entry.
etsysResourceProcessID
1.3.6.1.4.1.5624.1.2.49.1.2.1.1.1
Unsigned32
A value assigned to the process. This value is only unique per processor, not per chassis.
etsysResourceProcessName
1.3.6.1.4.1.5624.1.2.49.1.2.1.1.2
SnmpAdminStringAn octet string containing administrative information, preferably in human-readable form.
To facilitate internationalization, this information is represented using the ISO/IEC IS 10646-1 character set, encoded as an octet string using the UTF-8 transformation format described in [RFC2279].
Since additional code points are added by amendments to the 10646 standard from time to time, implementations must be prepared to encounter any code point from 0x00000000 to 0x7fffffff. Byte sequences that do not correspond to the valid UTF-8 encoding of a code point or are outside this range are prohibited.
The use of control codes should be avoided.
When it is necessary to represent a newline, the control code sequence CR LF should be used.
The use of leading or trailing white space should be avoided.
For code points not directly supported by user interface hardware or software, an alternative means of entry and display, such as hexadecimal, may be provided.
For information encoded in 7-bit US-ASCII, the UTF-8 encoding is identical to the US-ASCII encoding.
UTF-8 may require multiple bytes to represent a single character / code point; thus the length of this object in octets may be different from the number of characters encoded. Similarly, size constraints refer to the number of encoded octets, not the number of characters represented by an encoding.
Note that when this TC is used for an object that is used or envisioned to be used as an index, then a SIZE restriction MUST be specified so that the number of sub-identifiers for any object instance does not exceed the limit of 128, as defined by [RFC3416].
Note that the size of an SnmpAdminString object is measured in octets, not characters. SIZE (0..255) · OCTET STRING · hint 255t
A textual description of this running process.
etsysResourceProcessLoad5sec
1.3.6.1.4.1.5624.1.2.49.1.2.1.1.3
ResourceUtilizationThis data type is used as the syntax for objects which report the utilization of a resource as a percentage of a defined period of time. Each value embeds the first digit to the right of the decimal, 1/10ths of a percent, by multiplying the utilization by 10. For example, a utilization of 95.7 encodes to a ResourceUtilization value of 957. (0..1000) · Integer32
The average, over the last 5 seconds, of the percentage of time that this process was not idle.
etsysResourceProcessLoad1min
1.3.6.1.4.1.5624.1.2.49.1.2.1.1.4
ResourceUtilizationThis data type is used as the syntax for objects which report the utilization of a resource as a percentage of a defined period of time. Each value embeds the first digit to the right of the decimal, 1/10ths of a percent, by multiplying the utilization by 10. For example, a utilization of 95.7 encodes to a ResourceUtilization value of 957. (0..1000) · Integer32
The average, over the last 1 minute, of the percentage of time that this process was not idle.
etsysResourceProcessLoad5min
1.3.6.1.4.1.5624.1.2.49.1.2.1.1.5
ResourceUtilizationThis data type is used as the syntax for objects which report the utilization of a resource as a percentage of a defined period of time. Each value embeds the first digit to the right of the decimal, 1/10ths of a percent, by multiplying the utilization by 10. For example, a utilization of 95.7 encodes to a ResourceUtilization value of 957. (0..1000) · Integer32
The average, over the last 5 minutes, of the percentage of time that this process was not idle.
PhysicalIndexAn arbitrary value that uniquely identifies the physical entity. The value should be a small positive integer. Index values for different physical entities are not necessarily contiguous. (1..2147483647) · Integer32 · hint d
The index for this entry.
etsysResourceStorageType
1.3.6.1.4.1.5624.1.2.49.1.3.1.1.1
ResourceStorageType1 = other2 = ram3 = flash4 = usbFlashThis data type is used as the syntax of the etsysResourceStorageType object in the definition of the etsysResourceStorageTable.
other(1) storage type not defined by textual convention
ram(2) volatile storage
flash(3) nonvolatile storage
usbFlash(4) nonvolatile USB stick flash storage · Integer32
The type of storage represented by this entry.
etsysResourceStorageTypeID
1.3.6.1.4.1.5624.1.2.49.1.3.1.1.2
Unsigned32
A unique arbitrary value per storage type assigned to the entry.
etsysResourceStorageDescr
1.3.6.1.4.1.5624.1.2.49.1.3.1.1.3
SnmpAdminStringAn octet string containing administrative information, preferably in human-readable form.
To facilitate internationalization, this information is represented using the ISO/IEC IS 10646-1 character set, encoded as an octet string using the UTF-8 transformation format described in [RFC2279].
Since additional code points are added by amendments to the 10646 standard from time to time, implementations must be prepared to encounter any code point from 0x00000000 to 0x7fffffff. Byte sequences that do not correspond to the valid UTF-8 encoding of a code point or are outside this range are prohibited.
The use of control codes should be avoided.
When it is necessary to represent a newline, the control code sequence CR LF should be used.
The use of leading or trailing white space should be avoided.
For code points not directly supported by user interface hardware or software, an alternative means of entry and display, such as hexadecimal, may be provided.
For information encoded in 7-bit US-ASCII, the UTF-8 encoding is identical to the US-ASCII encoding.
UTF-8 may require multiple bytes to represent a single character / code point; thus the length of this object in octets may be different from the number of characters encoded. Similarly, size constraints refer to the number of encoded octets, not the number of characters represented by an encoding.
Note that when this TC is used for an object that is used or envisioned to be used as an index, then a SIZE restriction MUST be specified so that the number of sub-identifiers for any object instance does not exceed the limit of 128, as defined by [RFC3416].
Note that the size of an SnmpAdminString object is measured in octets, not characters. SIZE (0..255) · OCTET STRING · hint 255t
A textual description of this storage area.
etsysResourceStorageSize
1.3.6.1.4.1.5624.1.2.49.1.3.1.1.4
Unsigned32
The size, in Kilobytes, of the storage area.
etsysResourceStorageAvailable
1.3.6.1.4.1.5624.1.2.49.1.3.1.1.5
Unsigned32
The available space, in Kilobytes, left on the storage area.
Trap details
etsysResourceCpuLoad1minThresholdExceeded
1.3.6.1.4.1.5624.1.2.49.1.0.1
This notification indicates that the average, over the last 1 minute, of the percentage of time that a processor was not idle, has exceeded the etsysResourceCpuLoad1minThreshold value.
etsysResourceCpuLoad1min
1.3.6.1.4.1.5624.1.2.49.1.1.1.1.3
ResourceUtilizationThis data type is used as the syntax for objects which report the utilization of a resource as a percentage of a defined period of time. Each value embeds the first digit to the right of the decimal, 1/10ths of a percent, by multiplying the utilization by 10. For example, a utilization of 95.7 encodes to a ResourceUtilization value of 957. (0..1000) · Integer32
The average, over the last 1 minute, of the percentage of time that this processor was not idle.