etsysTxqMonitorDownTime
1.3.6.1.4.1.5624.1.2.99.1.1.1
Integer32
The number of sample intervals that ports disabled by Transmit Queue Monitor may be held down. A value of zero will set the down time to forever.
ENTERASYS-TRANSMIT-QUEUE-MONITOR-MIB
2013-02-25
This MIB module defines a portion of the SNMP MIB under the Enterasys Networks enterprise OID pertaining to the Transmit Queue Monitor MIB.
Download ENTERASYS-TRANSMIT-QUEUE-MONITOR-MIB.txt Open ENTERASYS-TRANSMIT-QUEUE-MONITOR-MIB.txt in a new tab
SCALARS (9) · TABLES (1) · TRAPS (3)
Scalars (9)
Tables (1)
| Name | OID |
|---|---|
| etsysTxqMonitorPortTable | 1.3.6.1.4.1.5624.1.2.99.1.2.1 |
Traps (3)
END OF TOC
Scalar details
etsysTxqMonitorIgnorePauseTime
1.3.6.1.4.1.5624.1.2.99.1.1.2
Integer32
The number of sample intervals that ports ignoring RX pause by Transmit Queue Monitor may be held in this state. A value of zero will set the ignore RX pause time to forever.
etsysTxqMonitorMinRate
1.3.6.1.4.1.5624.1.2.99.1.1.3
Integer32
The minimum rate of transmitted packets in a sampling interval.
etsysTxqMonitorSampleInterval
1.3.6.1.4.1.5624.1.2.99.1.1.4
Integer32
The rate(in seconds) that the transmit queues will be checked for stalled buffers.
etsysTxqMonitorTrapStatus
1.3.6.1.4.1.5624.1.2.99.1.1.5
INTEGER1 = enabled2 = disabled · Integer32
Trap status for transmit queue monitoring. When enabled, traps will be sent when each of enabled thresholds are reached.
etsysTxqMonitorLoggingThreshold
1.3.6.1.4.1.5624.1.2.99.1.1.6
Integer32
Threshold levels for the number of sequential failures before triggering logging action. A value of 0 disables the action.
etsysTxqMonitorIgnorePauseThreshold
1.3.6.1.4.1.5624.1.2.99.1.1.7
Integer32
Threshold levels for the number of sequential failures before triggering ignore pause action. A value of 0 disables the action.
etsysTxqMonitorDisablePortThreshold
1.3.6.1.4.1.5624.1.2.99.1.1.8
Integer32
Threshold levels for the number of sequential failures before triggering disable port action. A value of 0 disables the action.
etsysTxqMonitorEnableState
1.3.6.1.4.1.5624.1.2.99.1.1.9
INTEGER1 = enabled2 = disabled · Integer32
Transmit monitoring global state. If enabled(1), all ports will monitor the transmit queues for stalled ports. If a port is detected as stalled, the configured action will take effect.
Table details
etsysTxqMonitorPortTable
1.3.6.1.4.1.5624.1.2.99.1.2.1
Index: ifIndex
A table containing the Transmit Queue Monitoring port state.
from IF-MIB
ifIndex
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
etsysTxqMonitorPortConsecutiveStalled
1.3.6.1.4.1.5624.1.2.99.1.2.1.1.1
Counter64 (0..18446744073709551615)
The number of times the port has reached a stalled state consecutively.
etsysTxqMonitorPortTotalStalled
1.3.6.1.4.1.5624.1.2.99.1.2.1.1.2
Counter64 (0..18446744073709551615)
The total number of times the port has reached a stalled state.
etsysTxqMonitorPortOperationalStatus
1.3.6.1.4.1.5624.1.2.99.1.2.1.1.3
INTEGER1 = disabled2 = normal3 = logging4 = ignorePause5 = down · Integer32
The Transit Queue Monitor operational state. disabled(1) - Transmit queue monitoring is not running on this port. normal(2) - Transmit queue monitoring is currently monitoring this port and there are no stalled buffers. logging(3) - Transmit queue monitoring has detected a stalled buffer and is currently logging the condition. ignorePause(4) - Transmit queue monitoring has disabled the processing of received pause packets. down(5) Transmit queue monitoring has taken this port down.
etsysTxqMonitorPortReset
1.3.6.1.4.1.5624.1.2.99.1.2.1.1.4
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
This value shall always read false. When set to true, this object will clear any actions currently being taken by the transmit queue monitor and the ports etsysTxqMonitorPortOperationalStatus will be set to normal if transmit queue monitoring is enabled otherwise disabled.
etsysTxqMonitorPortCapabilities
1.3.6.1.4.1.5624.1.2.99.1.2.1.1.5
BITS
This object defines the capabilities the port supports for actions to be taken when a stalled port has been detected.
Trap details
etsysTxqMonitorLoggingNotification
1.3.6.1.4.1.5624.1.2.99.1.0.1
This notification indicates that the port has exceeded its logging threshold.
ifName
1.3.6.1.2.1.31.1.1.1.1
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The textual name of the interface. The value of this object should be the name of the interface as assigned by the local device and should be suitable for use in commands entered at the device's `console'. This might be a text name, such as `le0' or a simple port number, such as `1', depending on the interface naming syntax of the device. If several entries in the ifTable together represent a single interface as named by the device, then each will have the same value of ifName. Note that for an agent which responds to SNMP queries concerning an interface on some other (proxied) device, then the value of ifName for such an interface is the proxied device's local name for it. If there is no local name, or this object is otherwise not applicable, then this object contains a zero-length string.
etsysTxqMonitorLoggingThreshold
1.3.6.1.4.1.5624.1.2.99.1.1.6
Integer32
Threshold levels for the number of sequential failures before triggering logging action. A value of 0 disables the action.
etsysTxqMonitorIgnorePauseNotification
1.3.6.1.4.1.5624.1.2.99.1.0.2
This notification indicates that the port has exceeded its ignore pause threshold.
ifName
1.3.6.1.2.1.31.1.1.1.1
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The textual name of the interface. The value of this object should be the name of the interface as assigned by the local device and should be suitable for use in commands entered at the device's `console'. This might be a text name, such as `le0' or a simple port number, such as `1', depending on the interface naming syntax of the device. If several entries in the ifTable together represent a single interface as named by the device, then each will have the same value of ifName. Note that for an agent which responds to SNMP queries concerning an interface on some other (proxied) device, then the value of ifName for such an interface is the proxied device's local name for it. If there is no local name, or this object is otherwise not applicable, then this object contains a zero-length string.
etsysTxqMonitorIgnorePauseThreshold
1.3.6.1.4.1.5624.1.2.99.1.1.7
Integer32
Threshold levels for the number of sequential failures before triggering ignore pause action. A value of 0 disables the action.
etsysTxqMonitorDisablePortNotification
1.3.6.1.4.1.5624.1.2.99.1.0.3
This notification indicates that the port has exceeded its disable port threshold.
ifName
1.3.6.1.2.1.31.1.1.1.1
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The textual name of the interface. The value of this object should be the name of the interface as assigned by the local device and should be suitable for use in commands entered at the device's `console'. This might be a text name, such as `le0' or a simple port number, such as `1', depending on the interface naming syntax of the device. If several entries in the ifTable together represent a single interface as named by the device, then each will have the same value of ifName. Note that for an agent which responds to SNMP queries concerning an interface on some other (proxied) device, then the value of ifName for such an interface is the proxied device's local name for it. If there is no local name, or this object is otherwise not applicable, then this object contains a zero-length string.
etsysTxqMonitorDisablePortThreshold
1.3.6.1.4.1.5624.1.2.99.1.1.8
Integer32
Threshold levels for the number of sequential failures before triggering disable port action. A value of 0 disables the action.