agentIsdpClearStats
1.3.6.1.4.1.4526.10.39.1.1.1.1
INTEGER1 = clear · Integer32
Clear ISDP stats.
FASTPATH-ISDP-MIB
2007-12-03
The NETGEAR Private MIB for FastPath ISDP
Download FASTPATH-ISDP-MIB.txt Open FASTPATH-ISDP-MIB.txt in a new tab
Scalars (21)
Tables (2)
| Name | OID |
|---|---|
| agentIsdpCacheTable | 1.3.6.1.4.1.4526.10.39.1.2.1 |
| agentIsdpInterfaceTable | 1.3.6.1.4.1.4526.10.39.1.3.1 |
END OF TOC
Scalar details
agentIsdpClearEntries
1.3.6.1.4.1.4526.10.39.1.1.1.2
INTEGER1 = clear · Integer32
Clear ISDP entries table.
agentIsdpStatisticsPduReceived
1.3.6.1.4.1.4526.10.39.1.1.2.1
Counter32 · packets
Display the number of all ISDP pdu received.
agentIsdpStatisticsPduTransmit
1.3.6.1.4.1.4526.10.39.1.1.2.2
Counter32 · packets
Display the number of all ISDP pdu transmitted.
agentIsdpStatisticsV1PduReceived
1.3.6.1.4.1.4526.10.39.1.1.2.3
Counter32 · packets
Display the number of v1 ISDP pdu received.
agentIsdpStatisticsV1PduTransmit
1.3.6.1.4.1.4526.10.39.1.1.2.4
Counter32 · packets
Display the number of v1 ISDP pdu transmitted.
agentIsdpStatisticsV2PduReceived
1.3.6.1.4.1.4526.10.39.1.1.2.5
Counter32 · packets
Display the number of v2 ISDP pdu received.
agentIsdpStatisticsV2PduTransmit
1.3.6.1.4.1.4526.10.39.1.1.2.6
Counter32 · packets
Display the number of v2 ISDP pdu transmitted.
agentIsdpStatisticsBadHeaderPduReceived
1.3.6.1.4.1.4526.10.39.1.1.2.7
Counter32 · packets
Display the number of ISDP pdu with bad header received.
agentIsdpStatisticsChkSumErrorPduReceived
1.3.6.1.4.1.4526.10.39.1.1.2.8
Counter32 · packets
Display the number of ISDP pdu with chksum error received.
agentIsdpStatisticsFailurePduTransmit
1.3.6.1.4.1.4526.10.39.1.1.2.9
Counter32 · packets
Display the number of ISDP pdu transmition failures.
agentIsdpStatisticsInvalidFormatPduReceived
1.3.6.1.4.1.4526.10.39.1.1.2.10
Counter32 · packets
Display the number of ISDP pdu in invalid format received.
agentIsdpStatisticsTableFull
1.3.6.1.4.1.4526.10.39.1.1.2.11
Counter32 · times
Display the number of ISDP entry table was full.
agentIsdpStatisticsIpAddressTableFull
1.3.6.1.4.1.4526.10.39.1.1.2.12
Counter32 · times
Display the number of ISDP entry address table was full.
agentIsdpGlobalRun
1.3.6.1.4.1.4526.10.39.1.1.4
INTEGER1 = enable0 = disable · Integer32
An indication of whether the Indastry Standart Discovery Protocol is currently running. Entries in agentIsdpCacheTable are deleted when ISDP is disabled.
agentIsdpGlobalMessageInterval
1.3.6.1.4.1.4526.10.39.1.1.5
INTEGER (5..254) · Integer32 · seconds
The interval at which ISDP messages are to be generated. The default value is 60 seconds. This is also known as the ISDP timer.
agentIsdpGlobalHoldTime
1.3.6.1.4.1.4526.10.39.1.1.6
INTEGER (10..255) · Integer32 · seconds
The time for the receiving device holds ISDP message. The default value is 180 seconds.
agentIsdpGlobalDeviceId
1.3.6.1.4.1.4526.10.39.1.1.7
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The device ID advertised by this device. The format of this device ID is characterized by the value of agentIsdpGlobalDeviceIdFormat object.
agentIsdpGlobalAdvertiseV2
1.3.6.1.4.1.4526.10.39.1.1.8
INTEGER1 = enable0 = disable · Integer32
An indication of whether the Indastry Standart Discovery Protocol V2 is currently enabled.
agentIsdpGlobalDeviceIdFormatCpb
1.3.6.1.4.1.4526.10.39.1.1.9
BITS
Indicate the Device ID format capability of the device. serialNumber(0) indicates that the device supports using serial number as the format for its Device ID. macAddress(1) indicates that the device supports using layer 2 MAC address as the format for its Device ID. other(2) indicates that the device supports using its platform specific format as the format for its Device ID.
agentIsdpGlobalDeviceIdFormat
1.3.6.1.4.1.4526.10.39.1.1.10
INTEGER1 = serialNumber2 = macAddress3 = other · Integer32
An indication of the format of Device ID contained in the corresponding instance of agentIsdpGlobalDeviceId. User can only specify the formats which the device is capable of as denoted in agentIsdpGlobalDeviceIdFormatCpb object. serialNumber(1) indicates that the value of agentIsdpGlobalDeviceId object is in the form of an ASCII string contain the device serial number. macAddress(2) indicates that the value of agentIsdpGlobalDeviceId object is in the form of Layer 2 MAC address. other(3) indicates that the value of agentIsdpGlobalDeviceId object is in the form of a platform specific ASCII string contain info that identifies the device. For example: ASCII string contains serialNumber appended/prepened with system name.
Table details
agentIsdpCacheTable
1.3.6.1.4.1.4526.10.39.1.2.1
Index: agentIsdpCacheIfIndex · agentIsdpCacheIndex
The (conceptual) table containing the cached information obtained via receiving ISDP messages.
agentIsdpCacheIfIndex
1.3.6.1.4.1.4526.10.39.1.2.1.1.1
Integer32 (1..2147483647)
Normally, the ifIndex value of the local interface.
agentIsdpCacheIndex
1.3.6.1.4.1.4526.10.39.1.2.1.1.2
Integer32 (1..2147483647)
Index value is unique integer id of each neighbor entry.
agentIsdpCacheAddress
1.3.6.1.4.1.4526.10.39.1.2.1.1.3
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The (first) network-layer address of the device's SNMP-agent as reported in the Address TLV of the most recently received ISDP message. For example, if the corresponding instance of cacheAddressType had the value 'ip(1)', then this object would be an IP-address.
agentIsdpCacheLocalIntf
1.3.6.1.4.1.4526.10.39.1.2.1.1.4
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The device Interface which had this neighbor.
agentIsdpCacheVersion
1.3.6.1.4.1.4526.10.39.1.2.1.1.5
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The Version string as reported in the most recent ISDP message. The zero-length string indicates that no Version field (TLV) was reported in the most recent ISDP message.
agentIsdpCacheDeviceId
1.3.6.1.4.1.4526.10.39.1.2.1.1.6
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The Device-ID string as reported in the most recent ISDP message. The zero-length string indicates that no Device-ID field (TLV) was reported in the most recent ISDP message.
agentIsdpCacheDevicePort
1.3.6.1.4.1.4526.10.39.1.2.1.1.7
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The Port-ID string as reported in the most recent ISDP message. This will typically be the value of the ifName object (e.g., 'Ethernet0'). The zero-length string indicates that no Port-ID field (TLV) was reported in the most recent ISDP message.
agentIsdpCachePlatform
1.3.6.1.4.1.4526.10.39.1.2.1.1.8
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The Device's Hardware Platform as reported in the most recent ISDP message. The zero-length string indicates that no Platform field (TLV) was reported in the most recent ISDP message.
agentIsdpCacheCapabilities
1.3.6.1.4.1.4526.10.39.1.2.1.1.9
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The Device's Functional Capabilities as reported in the most recent ISDP message. For latest set of specific values, see the latest version of the ISDP specification. The zero-length string indicates that no Capabilities field (TLV) was reported in the most recent ISDP message.
agentIsdpCacheLastChange
1.3.6.1.4.1.4526.10.39.1.2.1.1.10
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
Indicates the time when this cache entry was last changed. This object is initialised to the current time when the entry gets created and updated to the current time whenever the value of any (other) object instance in the corresponding row is modified.
agentIsdpCacheProtocolVersion
1.3.6.1.4.1.4526.10.39.1.2.1.1.11
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The Device's version of ISDP protcol as reported in the most recent ISDP message.
agentIsdpCacheHoldtime
1.3.6.1.4.1.4526.10.39.1.2.1.1.12
INTEGER (10..255) · Integer32 · seconds
The Device's ISDP Holdtime as reported in the most recent ISDP message.
agentIsdpInterfaceTable
1.3.6.1.4.1.4526.10.39.1.3.1
Index: agentIsdpInterfaceIfIndex
The (conceptual) table containing the status of ISDP on the device's interfaces.
agentIsdpInterfaceIfIndex
1.3.6.1.4.1.4526.10.39.1.3.1.1.1
Integer32 (1..2147483647)
The ifIndex value of the local interface. For 802.3 Repeaters on which the repeater ports do not have ifIndex values assigned, this value is a unique value for the port, and greater than any ifIndex value supported by the repeater; in this case, the specific port is indicated by corresponding values of agentIsdpInterfaceGroup and agentIsdpInterfacePort, where these values correspond to the group number and port number values of RFC 1516.
agentIsdpInterfaceEnable
1.3.6.1.4.1.4526.10.39.1.3.1.1.2
INTEGER1 = enable0 = disable · Integer32
An indication of whether the Industry Standard Discovery Protocol is currently running on this interface. This variable has no effect when ISDP is disabled (agentIsdpGlobalRun = FALSE).