agentGlobalPortSecurityMode
1.3.6.1.4.1.4526.10.20.1.1
INTEGER1 = enable2 = disable · Integer32
Mode showing whether at the global level, port security is enabled or not.
FASTPATH-PORTSECURITY-PRIVATE-MIB
2007-05-23
The Netgear Private MIB for FASTPATH Port Security Feature.
Download FASTPATH-PORTSECURITY-PRIVATE-MIB.txt Open FASTPATH-PORTSECURITY-PRIVATE-MIB.txt in a new tab
SCALARS (1) · TABLES (2) · TRAPS (1)
Scalars (1)
| Name | OID |
|---|---|
| agentGlobalPortSecurityMode | 1.3.6.1.4.1.4526.10.20.1.1 |
Tables (2)
| Name | OID |
|---|---|
| agentPortSecurityTable | 1.3.6.1.4.1.4526.10.20.1.2 |
| agentPortSecurityDynamicTable | 1.3.6.1.4.1.4526.10.20.1.3 |
Traps (1)
| Name | OID |
|---|---|
| agentPortSecurityViolation | 1.3.6.1.4.1.4526.10.20.2.1 |
END OF TOC
Scalar details
Table details
agentPortSecurityTable
1.3.6.1.4.1.4526.10.20.1.2
Index: ifIndex
A table for Port Security and associated functionality.
from IF-MIB
ifIndex
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
agentPortSecurityMode
1.3.6.1.4.1.4526.10.20.1.2.1.1
INTEGER1 = enable2 = disable · Integer32
Mode showing whether at port level security is enabled or not.
agentPortSecurityDynamicLimit
1.3.6.1.4.1.4526.10.20.1.2.1.2
Unsigned32 (0..4096)
This variable signifies the limit of dynamically locked MAC addresses allowed on a specific port.
agentPortSecurityStaticLimit
1.3.6.1.4.1.4526.10.20.1.2.1.3
Unsigned32 (0..20)
This variable signifies the limit of statically locked MAC addresses allowed on a specific port.
agentPortSecurityViolationTrapMode
1.3.6.1.4.1.4526.10.20.1.2.1.4
INTEGER1 = enable2 = disable · Integer32
This variable is used to enable or disable the sending of new violation traps designating when a packet with a disallowed MAC address is received on a locked port.
agentPortSecurityStaticMACs
1.3.6.1.4.1.4526.10.20.1.2.1.6
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
This variable displays the statically locked MAC addresses for port. The list displayed in a particular fashion : 2 a0:b1:c2:d1:e3:a1,11 a0:b1:c2:d3:e4:f5 (i.e., VLAN MAC pairs separated by commas).
agentPortSecurityLastDiscardedMAC
1.3.6.1.4.1.4526.10.20.1.2.1.7
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
This variable displays the vlan-id and source MAC address of the last packet that was discarded on a locked port.
agentPortSecurityMACAddressAdd
1.3.6.1.4.1.4526.10.20.1.2.1.8
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
This MIB variable accepts a VLAN id and MAC address to be added to the list of statically locked MAC addresses on a port. The VLAN id and MAC address combination would be entered in a particular fashion like :- 2 a0:b0:c0:d1:e2:a1(the vlan-id and MAC address separated by a blank-space).
agentPortSecurityMACAddressRemove
1.3.6.1.4.1.4526.10.20.1.2.1.9
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
This MIB variable accepts a VLAN id and MAC address to be removed from the list of statically locked MAC addresses on a port.. The VLAN id and MAC address combination would be entered in a particular fashion like :- 2 a0:b0:c0:d1:e2:a1(the vlan-id and MAC address separated by a blank-space).
agentPortSecurityMACAddressMove
1.3.6.1.4.1.4526.10.20.1.2.1.10
INTEGER1 = enable2 = disable · Integer32
When this object is enabled, all the dynamically locked MAC addresses will be moved to statically locked addresses on a port. GET operation on this object will display disable.
agentPortSecurityDynamicTable
1.3.6.1.4.1.4526.10.20.1.3
Index: ifIndex · agentPortSecurityDynamicVLANId · agentPortSecurityDynamicMACAddress
A table for Port Security Dynamic and associated functionality.
from IF-MIB
ifIndex
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
agentPortSecurityDynamicVLANId
1.3.6.1.4.1.4526.10.20.1.3.1.1
Unsigned32
Source VLAN id of the packet that is received on the dynamically locked port.
agentPortSecurityDynamicMACAddress
1.3.6.1.4.1.4526.10.20.1.3.1.2
MacAddressRepresents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires MAC addresses to be transmitted most significant bit first. SIZE (6) · OCTET STRING · hint 1x:
Source MAC address of the packet that is received on the dynamically locked port.
Trap details
agentPortSecurityViolation
1.3.6.1.4.1.4526.10.20.2.1
Sent when a packet is received on a locked port with a source MAC address that is not allowed.
ifIndex
1.3.6.1.2.1.2.2.1.1
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
agentPortSecurityLastDiscardedMAC
1.3.6.1.4.1.4526.10.20.1.2.1.7
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
This variable displays the vlan-id and source MAC address of the last packet that was discarded on a locked port.