Multiple I-SID Registration Protocol module for managing IEEE 802.1Qbe
Unless otherwise indicated, the references in this MIB module are to IEEE Std 802.1Q.
Copyright (C) IEEE (2018). This version of this MIB module is part of IEEE Std 802.1Q; see the draft itself for full legal notices.
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
The administrative status requested by management for MIRP. The value true(1) indicates that MIRP should be enabled on this component, on all ports for which it has not been specifically disabled. When false(2), MIRP is disabled on all ports. This object affects all MIRP Applicant and Registrar state machines. A transition from false(2) to true(1) will cause a reset of all MIRP state machines on all ports.
The value of this object MUST be retained across reinitializations of the management system. Reference: 12.16.1.1.3:i, 12.16.1.2.2:b
ieee8021PbbMirpBvid
1.3.111.2.802.1.1.9.1.1.1.8
VlanIdOrNoneThe VLAN-ID that uniquely identifies a specific VLAN, or no VLAN. The special value of zero is used to indicate that no VLAN-ID is present or used. This can be used in any situation where an object or a table entry must refer either to a specific VLAN, or to no VLAN.
Note that a MIB object that is defined using this TEXTUAL-CONVENTION should clarify the meaning of 'no VLAN' (i.e., the special value 0). (0 | 1..4094) · Integer32 · hint d
The B-VID to which received MIRPDUs are to be assigned, or 0, if they are to be sent on the CBP PVID. Reference: 12.14.7.7.2 j), 12.14.7.7.2 c)
An enumerated value specifying what destination_address and vlan_identifier are to be used when the MIRP Participant transmits an MIRPDU towards the MAC relay entity:
cbpMirpGroup (1) Use the Nearest Customer Bridge group address from Table 8-1 with the MIRP B-VID.
cbpMirpVlan (2) Use the Nearest Customer Bridge group
address from Table 8-1 with the Backbone VLAN Identifier field from the Backbone Service Instance table. cbpMirpTable (3) Use the Default Backbone Destination and Backbone VLAN Identifier fields from the Backbone Service Instance table.
The value of this object MUST be retained across reinitializations of the management system. Reference: Table 8-1, 12.14.7.7.2 k), 12.14.7.7.2 d)
ieee8021PbbMirpPnpEnable
1.3.111.2.802.1.1.9.1.1.1.10
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
A Boolean value specifying the administrative status requested by management for attaching a MIRP Participant to a PNP if and only if this system is a Backbone Edge Bridge (BEB):
true(1) The BEB is to attach a MIRP Participant to exactly one
Port, either a management Port with no LAN connection external to the BEB, or a PNP. false(2) No MIRP Participant is to be present on any PNP (or on the MAC Relay-facing side of a CBP).
The value of this object MUST be retained across reinitializations of the management system. Reference: 12.14.7.7.2 j), 12.14.7.7.2 c)
ieee8021PbbMirpPnpPortNumber
1.3.111.2.802.1.1.9.1.1.1.11
IEEE8021BridgePortNumberOrZeroAn integer that uniquely identifies a Bridge Port. The value 0 means no port number, and this must be clarified in the DESCRIPTION clause of any object defined using this TEXTUAL-CONVENTION.Reference: 17.3.2.2 (0..65535) · Unsigned32 · hint d
The Bridge Port Number of the Provider Network Port (PNP) that has an associated MIRP Participant, or 0, if no Bridge Port has an associated MIRP Participant. This object indexes an entry in the Bridge Port Table. The system SHALL ensure that either ieee8021PbbMirpPnpPortNumber contains 0, or that the indexed ieee8021BridgeBasePortType object contains the value providerNetworkPort(3). Reference: 12.14.7.7.2 j), 12.14.7.7.2 c)
IEEE8021PbbComponentIdentifierThe component identifier is used to distinguish between the multiple virtual Bridge instances within a PB or PBB. Each virtual Bridge instance is called a component. In simple situations where there is only a single component the default value is 1. The component is identified by a component identifier unique within the BEB and by a MAC address unique within the PBBN. Each component is associated with a Backbone Edge Bridge (BEB) Configuration managed object.Reference: 12.3 l) (1..4294967295) · Unsigned32 · hint d
The component identifier is used to distinguish between the multiple virtual Bridge instances within a PBB. In simple situations where there is only a single component the default value is 1.
ieee8021BridgeBasePort
IEEE8021BridgePortNumberAn integer that uniquely identifies a Bridge Port, as specified in 17.3.2.2. This value is used within the spanning tree protocol to identify this port to neighbor Bridges.Reference: 17.3.2.2 (1..65535) · Unsigned32 · hint d
The port number of the port for which this entry contains Bridge management information. Reference: 12.4.2.1
ieee8021MirpV2PortEnabledStatus
1.3.111.2.802.1.1.23.1.1.1.1
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
The state of MIRP operation on this port. The value true(1) indicates that MIRP is enabled on this port, as long as ieee8021PbbMirpEnableStatus is also enabled for this component. When false(2) but ieee8021PbbMirpEnableStatus is still enabled for the device, MIRP is disabled on this port.
If MIRP is enabled on a VIP, then the MIRP Participant is enabled on that VIP's PIP. If MIRP is enabled on none of the VIPs on a PIP, then the MIRP Participant on the PIP is diabled; any MIRP packets received will be silently discarded, and no MIRP registrations will be propagated from the PIP. A transition from all VIPs on a PIP false(2) to at least one VIP on the PIP true(1) will cause a reset of all MIRP state machines on this PIP.
If MIRP is enabled on any port not a VIP, then the MIRP Participant is enabled on that port. If MIRP is disabled on a non-VIP port, then MIRP packets received will be silently discarded, and no MIRP registrations will be propagated from the port. A transition from false(2) to
true(1) will cause a reset of all MIRP state machines on a
non-VIP port.
The value of this object MUST be retained across reinitializations of the management system. Reference: 12.7.7.1, 12.7.7.2, 39.2.1.11