Multiple VLAN Registration Protocol extension module for managing MVRP extensions defined in IEEE Std 802.1Q
Unless otherwise indicated, the references in this MIB module are to IEEE Std 802.1Q.
Copyright (C) IEEE (2018). This version of this MIB module is part of IEEE Std 802.1Q; see the draft itself for full legal notices.
IEEE8021PbbComponentIdentifierThe component identifier is used to distinguish between the multiple virtual Bridge instances within a PB or PBB. Each virtual Bridge instance is called a component. In simple situations where there is only a single component the default value is 1. The component is identified by a component identifier unique within the BEB and by a MAC address unique within the PBBN. Each component is associated with a Backbone Edge Bridge (BEB) Configuration managed object.Reference: 12.3 l) (1..4294967295) · Unsigned32 · hint d
The component identifier is used to distinguish between the multiple virtual Bridge instances within a PBB. In simple situations where there is only a single component the default value is 1.
ieee8021BridgeBasePort
IEEE8021BridgePortNumberAn integer that uniquely identifies a Bridge Port, as specified in 17.3.2.2. This value is used within the spanning tree protocol to identify this port to neighbor Bridges.Reference: 17.3.2.2 (1..65535) · Unsigned32 · hint d
The port number of the port for which this entry contains Bridge management information. Reference: 12.4.2.1
ieee8021MvrpxPortNewOnly
1.3.111.2.802.1.1.22.1.1.1.1
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
The mode of operation of the MVRP state machines on this port, if enabled. The value of this object and the value of the individual Port+Attribute type enable object ieee8021QBridgePortMvrpEnabledStatus combine to control the state machines as follows:
ieee8021MvrpxPortNewOnly ieee8021QBridgePortMvrpEnabledStatus MVRP state machines
not implemented true(1) Full participant
false(2) true(1) Full participant
true(1) true(1) New-only participant
not implemented false(2) MVRP disabled
false(2) false(2) MVRP disabled
true(1) false(2) MVRP disabled
This object affects all MVRP Applicant and Registrar state machines on this port. A change to the value of this object will cause a reset of all MVRP state machines for this attribute type on this port.
The value of this object MUST be retained across reinitializations of the management system. Reference: 12.9.2.1.3, 12.9.2.2.2
ieee8021MvrpxPortMvrpNewPropagated
1.3.111.2.802.1.1.22.1.1.1.2
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
The mode of operation of the MVRP on this port, if enabled. If this object contains the value true(1), then all Static VLAN Registration Entries that are Registration Fixed are treated as Registration Fixed (New propagated), and if false(2), as Registration Fixed (New ignored)
This object affects only the MVRP Applicant and Registrar state machines on this port. A change to the value of this object will cause a reset of all MVRP state machines on this port.
The value of this object MUST be retained across reinitializations of the management system. Reference: 12.7.7.1.2:d, 12.7.7.3.3:d
ieee8021MvrpxPortXmitZero
1.3.111.2.802.1.1.22.1.1.1.3
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
Selects whether MVRP is enabled to transmit 0 as the attribute value for the one VLAN ID for which this Port is in the untagged set, true(1) to enable transmit 0, and false(2) to transmit the VLAN ID. The value 0 is not transmitted unless ieee8021MvrpxPortNewOnly is true(1).
This feature is optional. If not supported, the system SHALL NOT allow this object to be set to the value true(1).
The value of this object MUST be retained across reinitializations of the management system. Reference: 12.9.2.1.3:c, 12.9.2.2.2:e, 11.2.3.1.7