The administrative enable/disable state for Port Access Control in a System. Reference: 802.1X-2001 9.6.1, SystemAuthControl, 802.1X-2004 9.6.1, SystemAuthControl
Table details
dot1xPaePortTable
1.0.8802.1.1.1.1.1.2
Index: dot1xPaePortNumber
A table of system level information for each port supported by the Port Access Entity. An entry appears in this table for each port of this system. Reference: 802.1X-2001 9.6.1, 802.1X-2004 9.6.1
dot1xPaePortNumber
1.0.8802.1.1.1.1.1.2.1.1
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
The Port number associated with this Port. Reference: 802.1X-2001 9.6.1, Port number, 802.1X-2004 9.6.1, Port number
dot1xPaePortProtocolVersion
1.0.8802.1.1.1.1.1.2.1.2
Unsigned32
The protocol version associated with this Port. Reference: 802.1X-2001 9.6.1, Protocol version, 802.1X-2004 9.6.1, Protocol version
dot1xPaePortCapabilities
1.0.8802.1.1.1.1.1.2.1.3
BITS
Indicates the PAE functionality that this Port supports and that may be managed through this MIB. Reference: 802.1X-2001 9.6.1, PAE Capabilities, 802.1X-2004 9.6.1, PAE Capabilities
dot1xPaePortInitialize
1.0.8802.1.1.1.1.1.2.1.4
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
The initialization control for this Port. Setting this attribute TRUE causes the Port to be initialized. The attribute value reverts to FALSE once initialization has completed. Reference: 802.1X-2001 9.6.1.3, Initialize Port, 802.1X-2004 9.6.1.3, Initialize Port
dot1xPaePortReauthenticate
1.0.8802.1.1.1.1.1.2.1.5
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
The reauthentication control for this port. Setting this attribute TRUE causes the Authenticator PAE state machine for the Port to reauthenticate the Supplicant. Setting this attribute FALSE has no effect. This attribute always returns FALSE when it is read. Reference: 802.1X-2001 9.4.1.3 Reauthenticate, 802.1X-2004 9.4.1.3 Reauthenticate
dot1xAuthConfigTable
1.0.8802.1.1.1.1.2.1
Index: dot1xPaePortNumber
A table that contains the configuration objects for the Authenticator PAE associated with each port. An entry appears in this table for each port that may authenticate access to itself. Reference: 802.1X-2001 9.4.1 Authenticator Configuration, 802.1X-2004 9.4.1 Authenticator Configuration
The current value of the Authenticator PAE state machine. Reference: 802.1X-2001 9.4.1, Authenticator PAE state, 802.1X-2004 9.4.1, Authenticator PAE state
The current state of the Backend Authentication state machine. Reference: 802.1X-2001 9.4.1, Backend Authentication state, 802.1X-2004 9.4.1, Backend Authentication state
dot1xAuthAdminControlledDirections
1.0.8802.1.1.1.1.2.1.1.3
PaeControlledDirections0 = both1 = inThe control mode values for the Authenticator PAE. · Integer32
The current value of the administrative controlled directions parameter for the Port. Reference: 802.1X-2001 9.4.1, Admin Control Mode, 802.1X-2004 9.4.1, Admin Control Mode
dot1xAuthOperControlledDirections
1.0.8802.1.1.1.1.2.1.1.4
PaeControlledDirections0 = both1 = inThe control mode values for the Authenticator PAE. · Integer32
The current value of the operational controlled directions parameter for the Port. Reference: 802.1X-2001 9.4.1, Oper Control Mode, 802.1X-2004 9.4.1, Oper Control Mode
dot1xAuthAuthControlledPortStatus
1.0.8802.1.1.1.1.2.1.1.5
PaeControlledPortStatus1 = authorized2 = unauthorizedThe status values of the Authenticator PAE controlled Port. · Integer32
The current value of the controlled Port status parameter for the Port. Reference: 802.1X-2001 9.4.1, AuthControlledPortStatus, 802.1X-2004 9.4.1, AuthControlledPortStatus
dot1xAuthAuthControlledPortControl
1.0.8802.1.1.1.1.2.1.1.6
PaeControlledPortControl1 = forceUnauthorized2 = auto3 = forceAuthorizedThe control values of the Authenticator PAE controlled Port. · Integer32
The current value of the controlled Port control parameter for the Port. Reference: 802.1X-2001 9.4.1, AuthControlledPortControl, 802.1X-2004 9.4.1, AuthControlledPortControl
dot1xAuthQuietPeriod
1.0.8802.1.1.1.1.2.1.1.7
Unsigned32 · default 60
The value, in seconds, of the quietPeriod constant currently in use by the Authenticator PAE state machine. Reference: 802.1X-2001 9.4.1, quietPeriod, 802.1X-2004 9.4.1, quietPeriod
dot1xAuthTxPeriod
1.0.8802.1.1.1.1.2.1.1.8
Unsigned32 · default 30
The value, in seconds, of the txPeriod constant currently in use by the Authenticator PAE state machine. Reference: 802.1X-2001 9.4.1, txPeriod
dot1xAuthSuppTimeout
1.0.8802.1.1.1.1.2.1.1.9
Unsigned32 · default 30
The value, in seconds, of the suppTimeout constant currently in use by the Backend Authentication state machine. Reference: 802.1X-2001 9.4.1, suppTimeout, 802.1X-2004 9.4.1, suppTimeout
dot1xAuthServerTimeout
1.0.8802.1.1.1.1.2.1.1.10
Unsigned32 · default 30
The value, in seconds, of the serverTimeout constant currently in use by the Backend Authentication state machine. Reference: 802.1X-2001 9.4.1, serverTimeout, 802.1X-2004 9.4.1, serverTimeout
dot1xAuthMaxReq
1.0.8802.1.1.1.1.2.1.1.11
Unsigned32 · default 2
The value of the maxReq constant currently in use by the Backend Authentication state machine. Reference: 802.1X-2001 9.4.1, maxReq
dot1xAuthReAuthPeriod
1.0.8802.1.1.1.1.2.1.1.12
Unsigned32 · default 3600
The value, in seconds, of the reAuthPeriod constant currently in use by the Reauthentication Timer state machine. Reference: 802.1X-2001 9.4.1, reAuthPeriod, 802.1X-2004 9.4.1, reAuthPeriod
The enable/disable control used by the Reauthentication Timer state machine (8.5.5.1). Reference: 802.1X-2001 9.4.1, reAuthEnabled, 802.1X-2004 9.4.1, reAuthEnabled
dot1xAuthKeyTxEnabled
1.0.8802.1.1.1.1.2.1.1.14
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
The value of the keyTransmissionEnabled constant currently in use by the Authenticator PAE state machine. Reference: 802.1X-2001 9.4.1, keyTransmissionEnabled, 802.1X-2004 9.4.1, keyTransmissionEnabled
dot1xAuthStatsTable
1.0.8802.1.1.1.1.2.2
Index: dot1xPaePortNumber
A table that contains the statistics objects for the Authenticator PAE associated with each Port. An entry appears in this table for each port that may authenticate access to itself. Reference: 802.1X-2001 9.4.2 Authenticator Statistics, 802.1X-2004 9.4.2 Authenticator Statistics
dot1xAuthEapolFramesRx
1.0.8802.1.1.1.1.2.2.1.1
Counter32
The number of valid EAPOL frames of any type that have been received by this Authenticator. Reference: 802.1X-2001 9.4.2, EAPOL frames received, 802.1X-2004 9.4.2, EAPOL frames received
dot1xAuthEapolFramesTx
1.0.8802.1.1.1.1.2.2.1.2
Counter32
The number of EAPOL frames of any type that have been transmitted by this Authenticator. Reference: 802.1X-2001 9.4.2, EAPOL frames transmitted, 802.1X-2004 9.4.2, EAPOL frames transmitted
dot1xAuthEapolStartFramesRx
1.0.8802.1.1.1.1.2.2.1.3
Counter32
The number of EAPOL Start frames that have been received by this Authenticator. Reference: 802.1X-2001 9.4.2, EAPOL Start frames received, 802.1X-2004 9.4.2, EAPOL Start frames received
dot1xAuthEapolLogoffFramesRx
1.0.8802.1.1.1.1.2.2.1.4
Counter32
The number of EAPOL Logoff frames that have been received by this Authenticator. Reference: 802.1X-2001 9.4.2, EAPOL Logoff frames received, 802.1X-2004 9.4.2, EAPOL Logoff frames received
dot1xAuthEapolRespIdFramesRx
1.0.8802.1.1.1.1.2.2.1.5
Counter32
The number of EAP Resp/Id frames that have been received by this Authenticator. Reference: 802.1X-2001 9.4.2, EAPOL Resp/Id frames received, 802.1X-2004 9.4.2, EAPOL Resp/Id frames received
dot1xAuthEapolRespFramesRx
1.0.8802.1.1.1.1.2.2.1.6
Counter32
The number of valid EAP Response frames (other than Resp/Id frames) that have been received by this Authenticator. Reference: 802.1X-2001 9.4.2, EAPOL Response frames received, 802.1X-2004 9.4.2, EAPOL Response frames received
dot1xAuthEapolReqIdFramesTx
1.0.8802.1.1.1.1.2.2.1.7
Counter32
The number of EAP Req/Id frames that have been transmitted by this Authenticator. Reference: 802.1X-2001 9.4.2, EAPOL Req/Id frames transmitted, 802.1X-2004 9.4.2, EAPOL Req/Id frames transmitted
dot1xAuthEapolReqFramesTx
1.0.8802.1.1.1.1.2.2.1.8
Counter32
The number of EAP Request frames (other than Rq/Id frames) that have been transmitted by this Authenticator. Reference: 802.1X-2001 9.4.2, EAPOL Request frames transmitted, 802.1X-2004 9.4.2, EAPOL Request frames transmitted
dot1xAuthInvalidEapolFramesRx
1.0.8802.1.1.1.1.2.2.1.9
Counter32
The number of EAPOL frames that have been received by this Authenticator in which the frame type is not recognized. Reference: 802.1X-2001 9.4.2, Invalid EAPOL frames received, 802.1X-2004 9.4.2, Invalid EAPOL frames received
dot1xAuthEapLengthErrorFramesRx
1.0.8802.1.1.1.1.2.2.1.10
Counter32
The number of EAPOL frames that have been received by this Authenticator in which the Packet Body Length field is invalid. Reference: 802.1X-2001 9.4.2, EAP length error frames received, 802.1X-2004 9.4.2, EAP length error frames received
dot1xAuthLastEapolFrameVersion
1.0.8802.1.1.1.1.2.2.1.11
Unsigned32
The protocol version number carried in the most recently received EAPOL frame. Reference: 802.1X-2001 9.4.2, Last EAPOL frame version, 802.1X-2004 9.4.2, Last EAPOL frame version
dot1xAuthLastEapolFrameSource
1.0.8802.1.1.1.1.2.2.1.12
MacAddressRepresents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires MAC addresses to be transmitted most significant bit first. SIZE (6) · OCTET STRING · hint 1x:
The source MAC address carried in the most recently received EAPOL frame. Reference: 802.1X-2001 9.4.2, Last EAPOL frame source, 802.1X-2004 9.4.2, Last EAPOL frame source
dot1xAuthDiagTable
1.0.8802.1.1.1.1.2.3
Index: dot1xPaePortNumber
A table that contains the diagnostics objects for the Authenticator PAE associated with each Port. An entry appears in this table for each port that may authenticate access to itself. Reference: 802.1X-2001 9.4.3 Authenticator Diagnostics
dot1xAuthEntersConnecting
1.0.8802.1.1.1.1.2.3.1.1
Counter32
Counts the number of times that the state machine transitions to the CONNECTING state from any other state. Reference: 802.1X-2001 9.4.2, 802.1X-2001 8.5.4.2.1
dot1xAuthEapLogoffsWhileConnecting
1.0.8802.1.1.1.1.2.3.1.2
Counter32
Counts the number of times that the state machine transitions from CONNECTING to DISCONNECTED as a result of receiving an EAPOL-Logoff message. Reference: 802.1X-2001 9.4.2, 802.1X-2001 8.5.4.2.2
dot1xAuthEntersAuthenticating
1.0.8802.1.1.1.1.2.3.1.3
Counter32
Counts the number of times that the state machine transitions from CONNECTING to AUTHENTICATING, as a result of an EAP-Response/Identity message being received from the Supplicant. Reference: 802.1X-2001 9.4.2, 802.1X-2001 8.5.4.2.3
dot1xAuthAuthSuccessWhileAuthenticating
1.0.8802.1.1.1.1.2.3.1.4
Counter32
Counts the number of times that the state machine transitions from AUTHENTICATING to AUTHENTICATED, as a result of the Backend Authentication state machine indicating successful authentication of the Supplicant (authSuccess = TRUE). Reference: 802.1X-2001 9.4.2, 802.1X-2001 8.5.4.2.4
dot1xAuthAuthTimeoutsWhileAuthenticating
1.0.8802.1.1.1.1.2.3.1.5
Counter32
Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of the Backend Authentication state machine indicating authentication timeout (authTimeout = TRUE). Reference: 802.1X-2001 9.4.2, 802.1X-2001 8.5.4.2.5
dot1xAuthAuthFailWhileAuthenticating
1.0.8802.1.1.1.1.2.3.1.6
Counter32
Counts the number of times that the state machine transitions from AUTHENTICATING to HELD, as a result of the Backend Authentication state machine indicating authentication failure (authFail = TRUE). Reference: 802.1X-2001 9.4.2, 802.1X-2001 8.5.4.2.6
dot1xAuthAuthReauthsWhileAuthenticating
1.0.8802.1.1.1.1.2.3.1.7
Counter32
Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of a reauthentication request (reAuthenticate = TRUE). Reference: 802.1X-2001 9.4.2, 802.1X-2001 8.5.4.2.7
dot1xAuthAuthEapStartsWhileAuthenticating
1.0.8802.1.1.1.1.2.3.1.8
Counter32
Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of an EAPOL-Start message being received from the Supplicant. Reference: 802.1X-2001 9.4.2, 802.1X-2001 8.5.4.2.8
dot1xAuthAuthEapLogoffWhileAuthenticating
1.0.8802.1.1.1.1.2.3.1.9
Counter32
Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of an EAPOL-Logoff message being received from the Supplicant. Reference: 802.1X-2001 9.4.2, 802.1X-2001 8.5.4.2.9
dot1xAuthAuthReauthsWhileAuthenticated
1.0.8802.1.1.1.1.2.3.1.10
Counter32
Counts the number of times that the state machine transitions from AUTHENTICATED to CONNECTING, as a result of a reauthentication request (reAuthenticate = TRUE). Reference: 802.1X-2001 9.4.2, 802.1X-2001 8.5.4.2.10
dot1xAuthAuthEapStartsWhileAuthenticated
1.0.8802.1.1.1.1.2.3.1.11
Counter32
Counts the number of times that the state machine transitions from AUTHENTICATED to CONNECTING, as a result of an EAPOL-Start message being received from the Supplicant. Reference: 802.1X-2001 9.4.2, 802.1X-2001 8.5.4.2.11
dot1xAuthAuthEapLogoffWhileAuthenticated
1.0.8802.1.1.1.1.2.3.1.12
Counter32
Counts the number of times that the state machine transitions from AUTHENTICATED to DISCONNECTED, as a result of an EAPOL-Logoff message being received from the Supplicant. Reference: 802.1X-2001 9.4.2, 802.1X-2001 8.5.4.2.12
dot1xAuthBackendResponses
1.0.8802.1.1.1.1.2.3.1.13
Counter32
Counts the number of times that the state machine sends an initial Access-Request packet to the Authentication server (i.e., executes sendRespToServer on entry to the RESPONSE state). Indicates that the Authenticator attempted communication with the Authentication Server. Reference: 802.1X-2001 9.4.2, 802.1X-2001 8.5.6.2.1
dot1xAuthBackendAccessChallenges
1.0.8802.1.1.1.1.2.3.1.14
Counter32
Counts the number of times that the state machine receives an initial Access-Challenge packet from the Authentication server (i.e., aReq becomes TRUE, causing exit from the RESPONSE state). Indicates that the Authentication Server has communication with the Authenticator. Reference: 802.1X-2001 9.4.2, 802.1X-2001 8.5.6.2.2
dot1xAuthBackendOtherRequestsToSupplicant
1.0.8802.1.1.1.1.2.3.1.15
Counter32
Counts the number of times that the state machine sends an EAP-Request packet (other than an Identity, Notification, Failure or Success message) to the Supplicant (i.e., executes txReq on entry to the REQUEST state). Indicates that the Authenticator chose an EAP-method. Reference: 802.1X-2001 9.4.2, 802.1X-2001 8.5.6.2.3
dot1xAuthBackendNonNakResponsesFromSupplicant
1.0.8802.1.1.1.1.2.3.1.16
Counter32
Counts the number of times that the state machine receives a response from the Supplicant to an initial EAP-Request, and the response is something other than EAP-NAK (i.e., rxResp becomes TRUE, causing the state machine to transition from REQUEST to RESPONSE, and the response is not an EAP-NAK). Indicates that the Supplicant can respond to the Authenticator�s chosen EAP-method. Reference: 802.1X-2001 9.4.2, 802.1X-2001 8.5.6.2.4
dot1xAuthBackendAuthSuccesses
1.0.8802.1.1.1.1.2.3.1.17
Counter32
Counts the number of times that the state machine receives an EAP-Success message from the Authentication Server (i.e., aSuccess becomes TRUE, causing a transition from RESPONSE to SUCCESS). Indicates that the Supplicant has successfully authenticated to the Authentication Server. Reference: 802.1X-2001 9.4.2, 802.1X-2001 8.5.6.2.5
dot1xAuthBackendAuthFails
1.0.8802.1.1.1.1.2.3.1.18
Counter32
Counts the number of times that the state machine receives an EAP-Failure message from the Authentication Server (i.e., aFail becomes TRUE, causing a transition from RESPONSE to FAIL). Indicates that the Supplicant has not authenticated to the Authentication Server. Reference: 802.1X-2001 9.4.2, 802.1X-2001 8.5.6.2.6
dot1xAuthSessionStatsTable
1.0.8802.1.1.1.1.2.4
Index: dot1xPaePortNumber
A table that contains the session statistics objects for the Authenticator PAE associated with each Port. An entry appears in this table for each port that may authenticate access to itself. Reference: 802.1X-2001 9.4.4, 802.1X-2004 9.4.4
dot1xAuthSessionOctetsRx
1.0.8802.1.1.1.1.2.4.1.1
Counter64 (0..18446744073709551615)
The number of octets received in user data frames on this Port during the session. Reference: 802.1X-2001 9.4.4, Session Octets Received, 802.1X-2004 9.4.4, Session Octets Received
dot1xAuthSessionOctetsTx
1.0.8802.1.1.1.1.2.4.1.2
Counter64 (0..18446744073709551615)
The number of octets transmitted in user data frames on this Port during the session. Reference: 802.1X-2001 9.4.4, Session Octets Transmitted, 802.1X-2004 9.4.4, Session Octets Transmitted
dot1xAuthSessionFramesRx
1.0.8802.1.1.1.1.2.4.1.3
Counter32
The number of user data frames received on this Port during the session. Reference: 802.1X-2001 9.4.4, Session Frames Received, 802.1X-2004 9.4.4, Session Frames Received
dot1xAuthSessionFramesTx
1.0.8802.1.1.1.1.2.4.1.4
Counter32
The number of user data frames transmitted on this Port during the session. Reference: 802.1X-2001 9.4.4, Session Frames Transmitted, 802.1X-2004 9.4.4, Session Frames Transmitted
dot1xAuthSessionId
1.0.8802.1.1.1.1.2.4.1.5
SnmpAdminStringAn octet string containing administrative information, preferably in human-readable form.
To facilitate internationalization, this information is represented using the ISO/IEC IS 10646-1 character set, encoded as an octet string using the UTF-8 transformation format described in [RFC2279].
Since additional code points are added by amendments to the 10646 standard from time to time, implementations must be prepared to encounter any code point from 0x00000000 to 0x7fffffff. Byte sequences that do not correspond to the valid UTF-8 encoding of a code point or are outside this range are prohibited.
The use of control codes should be avoided.
When it is necessary to represent a newline, the control code sequence CR LF should be used.
The use of leading or trailing white space should be avoided.
For code points not directly supported by user interface hardware or software, an alternative means of entry and display, such as hexadecimal, may be provided.
For information encoded in 7-bit US-ASCII, the UTF-8 encoding is identical to the US-ASCII encoding.
UTF-8 may require multiple bytes to represent a single character / code point; thus the length of this object in octets may be different from the number of characters encoded. Similarly, size constraints refer to the number of encoded octets, not the number of characters represented by an encoding.
Note that when this TC is used for an object that is used or envisioned to be used as an index, then a SIZE restriction MUST be specified so that the number of sub-identifiers for any object instance does not exceed the limit of 128, as defined by [RFC3416].
Note that the size of an SnmpAdminString object is measured in octets, not characters. SIZE (0..255) · OCTET STRING · hint 255t
A unique identifier for the session, in the form of a printable ASCII string of at least three characters. Reference: 802.1X-2001 9.4.4, Session Identifier, 802.1X-2004 9.4.4, Session Identifier
The authentication method used to establish the session. Reference: 802.1X-2001 9.4.4, Session Authentication Method, 802.1X-2004 9.4.4, Session Authentication Method
dot1xAuthSessionTime
1.0.8802.1.1.1.1.2.4.1.7
TimeTicks
The duration of the session in seconds. Reference: 802.1X-2001 9.4.4, Session Time, 802.1X-2004 9.4.4, Session Time
The reason for the session termination. Reference: 802.1X-2001 9.4.4, Session Terminate Cause, 802.1X-2004 9.4.4, Session Terminate Cause
dot1xAuthSessionUserName
1.0.8802.1.1.1.1.2.4.1.9
SnmpAdminStringAn octet string containing administrative information, preferably in human-readable form.
To facilitate internationalization, this information is represented using the ISO/IEC IS 10646-1 character set, encoded as an octet string using the UTF-8 transformation format described in [RFC2279].
Since additional code points are added by amendments to the 10646 standard from time to time, implementations must be prepared to encounter any code point from 0x00000000 to 0x7fffffff. Byte sequences that do not correspond to the valid UTF-8 encoding of a code point or are outside this range are prohibited.
The use of control codes should be avoided.
When it is necessary to represent a newline, the control code sequence CR LF should be used.
The use of leading or trailing white space should be avoided.
For code points not directly supported by user interface hardware or software, an alternative means of entry and display, such as hexadecimal, may be provided.
For information encoded in 7-bit US-ASCII, the UTF-8 encoding is identical to the US-ASCII encoding.
UTF-8 may require multiple bytes to represent a single character / code point; thus the length of this object in octets may be different from the number of characters encoded. Similarly, size constraints refer to the number of encoded octets, not the number of characters represented by an encoding.
Note that when this TC is used for an object that is used or envisioned to be used as an index, then a SIZE restriction MUST be specified so that the number of sub-identifiers for any object instance does not exceed the limit of 128, as defined by [RFC3416].
Note that the size of an SnmpAdminString object is measured in octets, not characters. SIZE (0..255) · OCTET STRING · hint 255t
The User-Name representing the identity of the Supplicant PAE. Reference: 802.1X-2001 9.4.4, Session User Name, 802.1X-2004 9.4.4, Session User Name
dot1xSuppConfigTable
1.0.8802.1.1.1.1.3.1
Index: dot1xPaePortNumber
A table that contains the configuration objects for the Supplicant PAE associated with each port. An entry appears in this table for each port that may authenticate itself when challenged by a remote system. Reference: 802.1X-2001 9.5.1, 802.1X-2004 9.5.1
The current state of the Supplicant PAE state machine (8.5.8). Reference: 802.1X-2001 9.5.1, Supplicant PAE State, 802.1X-2004 9.5.1, Supplicant PAE State
dot1xSuppHeldPeriod
1.0.8802.1.1.1.1.3.1.1.2
Unsigned32 · default 60
The value, in seconds, of the heldPeriod constant currently in use by the Supplicant PAE state machine (8.5.8.1.2). Reference: 802.1X-2001 9.5.1, heldPeriod, 802.1X-2004 9.5.1, heldPeriod
dot1xSuppAuthPeriod
1.0.8802.1.1.1.1.3.1.1.3
Unsigned32 · default 30
The value, in seconds, of the authPeriod constant currently in use by the Supplicant PAE state machine (8.5.8.1.2). Reference: 802.1X-2001 9.5.1, authPeriod, 802.1X-2004 9.5.1, authPeriod
dot1xSuppStartPeriod
1.0.8802.1.1.1.1.3.1.1.4
Unsigned32 · default 30
The value, in seconds, of the startPeriod constant currently in use by the Supplicant PAE state machine (8.5.8.1.2). Reference: 802.1X-2001 9.5.1, startPeriod, 802.1X-2004 9.5.1, startPeriod
dot1xSuppMaxStart
1.0.8802.1.1.1.1.3.1.1.5
Unsigned32 · default 3
The value of the maxStart constant currently in use by the Supplicant PAE state machine (8.5.8.1.2). Reference: 802.1X-2001 9.5.1, maxStart, 802.1X-2004 9.5.1, maxStart
dot1xSuppControlledPortStatus
1.0.8802.1.1.1.1.3.1.1.6
PaeControlledPortStatus1 = authorized2 = unauthorizedThe status values of the Authenticator PAE controlled Port. · Integer32
The current state of the Supplicant PAE state machine (8.5.8). Reference: 802.1X-2001 9.5.1, Supplicant PAE State, 802.1X-2004 9.5.1, Supplicant PAE State
The setting for the application of the Supplicant authorization state when the port is operating as both a Supplicant and an Authenticator.
inactive indicates the port will not apply the
the Supplicant authorization state, using only the Authenticator authorization state to restrict access to the port.
active indicates the port will apply the
the Supplicant authorization state, as well as the Authenticator authorization state. Reference: 802.1X-2004 9.5.1, Supplicant Access Control With Authenticator
The current state of the Supplicant Backend state machine. Reference: 802.1X-2004 9.5.1, Backend Supplicant state
dot1xSuppStatsTable
1.0.8802.1.1.1.1.3.2
Index: dot1xPaePortNumber
A table that contains the statistics objects for the Supplicant PAE associated with each port. An entry appears in this table for each port that may authenticate itself when challenged by a remote system. Reference: 802.1X-2001 9.5.2, 802.1X-2004 9.5.2
dot1xSuppEapolFramesRx
1.0.8802.1.1.1.1.3.2.1.1
Counter32
The number of EAPOL frames of any type that have been received by this Supplicant. Reference: 802.1X-2001 9.5.2, EAPOL frames received, 802.1X-2004 9.5.2, EAPOL frames received
dot1xSuppEapolFramesTx
1.0.8802.1.1.1.1.3.2.1.2
Counter32
The number of EAPOL frames of any type that have been transmitted by this Supplicant. Reference: 802.1X-2001 9.5.2, EAPOL frames transmitted, 802.1X-2004 9.5.2, EAPOL frames transmitted
dot1xSuppEapolStartFramesTx
1.0.8802.1.1.1.1.3.2.1.3
Counter32
The number of EAPOL Start frames that have been transmitted by this Supplicant. Reference: 802.1X-2001 9.5.2, EAPOL Start frames transmitted, 802.1X-2004 9.5.2, EAPOL Start frames transmitted
dot1xSuppEapolLogoffFramesTx
1.0.8802.1.1.1.1.3.2.1.4
Counter32
The number of EAPOL Logoff frames that have been transmitted by this Supplicant. Reference: 802.1X-2001 9.5.2, EAPOL Logoff frames transmitted, 802.1X-2004 9.5.2, EAPOL Logoff frames transmitted
dot1xSuppEapolRespIdFramesTx
1.0.8802.1.1.1.1.3.2.1.5
Counter32
The number of EAP Resp/Id frames that have been transmitted by this Supplicant. Reference: 802.1X-2001 9.5.2, EAP Resp/Id frames transmitted, 802.1X-2004 9.5.2, EAP Resp/Id frames transmitted
dot1xSuppEapolRespFramesTx
1.0.8802.1.1.1.1.3.2.1.6
Counter32
The number of valid EAP Response frames (other than Resp/Id frames) that have been transmitted by this Supplicant. Reference: 802.1X-2001 9.5.2, EAP Resp frames transmitted, 802.1X-2004 9.5.2, EAP Resp frames transmitted
dot1xSuppEapolReqIdFramesRx
1.0.8802.1.1.1.1.3.2.1.7
Counter32
The number of EAP Req/Id frames that have been received by this Supplicant. Reference: 802.1X-2001 9.5.2, EAP Req/Id frames received, 802.1X-2004 9.5.2, EAP Req/Id frames received
dot1xSuppEapolReqFramesRx
1.0.8802.1.1.1.1.3.2.1.8
Counter32
The number of EAP Request frames (other than Rq/Id frames) that have been received by this Supplicant. Reference: 802.1X-2001 9.5.2, EAP Req frames received, 802.1X-2004 9.5.2, EAP Req frames received
dot1xSuppInvalidEapolFramesRx
1.0.8802.1.1.1.1.3.2.1.9
Counter32
The number of EAPOL frames that have been received by this Supplicant in which the frame type is not recognized. Reference: 802.1X-2001 9.5.2, Invalid EAPOL frames received, 802.1X-2004 9.5.2, Invalid EAPOL frames received
dot1xSuppEapLengthErrorFramesRx
1.0.8802.1.1.1.1.3.2.1.10
Counter32
The number of EAPOL frames that have been received by this Supplicant in which the Packet Body Length field (7.5.5) is invalid. Reference: 802.1X-2001 9.5.2, EAP length error frames received, 802.1X-2004 9.5.2, EAP length error frames received
dot1xSuppLastEapolFrameVersion
1.0.8802.1.1.1.1.3.2.1.11
Unsigned32
The protocol version number carried in the most recently received EAPOL frame. Reference: 802.1X-2001 9.5.2, Last EAPOL frame version, 802.1X-2004 9.5.2, Last EAPOL frame version
dot1xSuppLastEapolFrameSource
1.0.8802.1.1.1.1.3.2.1.12
MacAddressRepresents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires MAC addresses to be transmitted most significant bit first. SIZE (6) · OCTET STRING · hint 1x:
The source MAC address carried in the most recently received EAPOL frame. Reference: 802.1X-2001 9.5.2, Last EAPOL frame source, 802.1X-2004 9.5.2, Last EAPOL frame source