EZ5 MIB Catalog

IEEE8021-TSN-REMOTE-MANAGEMENT-MIB

2018-10-04

Download IEEE8021-TSN-REMOTE-MANAGEMENT-MIB.txt Open IEEE8021-TSN-REMOTE-MANAGEMENT-MIB.txt in a new tab

The Bridge MIB module for managing devices that support the IEEE Std 802.1Q Stream Reservation Protocol Enhancements and Performance Improvements. Unless otherwise indicated, the references in this MIB module are to IEEE Std 802.1Q. Copyright (C) IEEE (2018). This version of this MIB module is part of IEEE802.1Q; see the draft itself for full legal notices.

SCALARS (1) · TABLES (3)

Scalars (1)

NameOID
ieee8021TsnRemoteMgmtStaticTreesSupported1.3.111.2.802.1.1.32.1.3.1

Tables (3)

NameOID
ieee8021TsnRemoteMgmtBridgeDelayTable1.3.111.2.802.1.1.32.1.1.1
ieee8021TsnRemoteMgmtPropagationDelayTable1.3.111.2.802.1.1.32.1.2.1
ieee8021TsnRemoteMgmtMsrpMrpExternalControlTable1.3.111.2.802.1.1.32.1.4.1

END OF TOC

Scalar details

ieee8021TsnRemoteMgmtStaticTreesSupported

1.3.111.2.802.1.1.32.1.3.1

TruthValue1 = true2 = falseRepresents a boolean value. · Integer32

This attribute is used by the TSN CNC to determine that TE-MSTID is supported by the Bridge.

Table details

ieee8021TsnRemoteMgmtBridgeDelayTable

1.3.111.2.802.1.1.32.1.1.1

Index: ieee8021BridgeBaseComponentId · ieee8021BridgeTrafficClass · ieee8021TsnRemoteMgmtBridgeIngressPort · ieee8021TsnRemoteMgmtBridgeEgressPort

A table containing a set of parameters necessary to determine the delay of frames as they pass through the Bridge's relay. There is one Bridge Delay managed object per Port pair of a Bridge component. The Port pair consists of three indices, an ingress Port followed by an egress Port and a traffic class associated with the Port pair.

from IEEE8021-BRIDGE-MIB

ieee8021BridgeBaseComponentId

IEEE8021PbbComponentIdentifierThe component identifier is used to distinguish between the multiple virtual Bridge instances within a PB or PBB. Each virtual Bridge instance is called a component. In simple situations where there is only a single component the default value is 1. The component is identified by a component identifier unique within the BEB and by a MAC address unique within the PBBN. Each component is associated with a Backbone Edge Bridge (BEB) Configuration managed object.Reference: 12.3 l) (1..4294967295) · Unsigned32 · hint d

The component identifier is used to distinguish between the multiple virtual Bridge instances within a PBB. In simple situations where there is only a single component the default value is 1.

ieee8021BridgeTrafficClass

Integer32 (0..7)

The Traffic Class the received frame is mapped to. The value of this object MUST be retained across reinitializations of the management system.

ieee8021TsnRemoteMgmtBridgeIngressPort

1.3.111.2.802.1.1.32.1.1.1.1.1

IEEE8021BridgePortNumberAn integer that uniquely identifies a Bridge Port, as specified in 17.3.2.2. This value is used within the spanning tree protocol to identify this port to neighbor Bridges.Reference: 17.3.2.2 (1..65535) · Unsigned32 · hint d

...

ieee8021TsnRemoteMgmtBridgeEgressPort

1.3.111.2.802.1.1.32.1.1.1.1.2

IEEE8021BridgePortNumberAn integer that uniquely identifies a Bridge Port, as specified in 17.3.2.2. This value is used within the spanning tree protocol to identify this port to neighbor Bridges.Reference: 17.3.2.2 (1..65535) · Unsigned32 · hint d

...

ieee8021TsnRemoteMgmtIndependentDelayMin

1.3.111.2.802.1.1.32.1.1.1.1.3

Unsigned32

This attribute provides the minimum delay independent from frame length for a frame to forward from ingress port to egress port. The delay begins when the message timestamp point of the ingress frame passes the reference plane marking the boundary between the network media and PHY. The delay ends when the message timestamp point of the egress frame passes the reference plane marking the boundary between the network media and PHY. The message timestamp point is specified by IEEE Std 802.1AS for various media, near the start of the frame. Note: This delay includes all aspects of length-independent delay for a frame that is forwarded, including handling of error conditions.

ieee8021TsnRemoteMgmtIndependentDelayMax

1.3.111.2.802.1.1.32.1.1.1.1.4

Unsigned32

This attribute provides the maximum delay independent from frame length for a frame to forward from ingress port to egress port. The delay begins when the message timestamp point of the ingress frame passes the reference plane marking the boundary between the network media and PHY. The delay ends when the message timestamp point of the egress frame passes the reference plane marking the boundary between the network media and PHY. The message timestamp point is specified by IEEE Std 802.1AS for various media, near the start of the frame.

ieee8021TsnRemoteMgmtDependentDelayMin

1.3.111.2.802.1.1.32.1.1.1.1.5

Unsigned32

This attribute provides the minimum length-dependent delay from ingress port to egress port. It provides the portion of delay that is dependent on frame length, where frame length is the number of octets that transfer across the MAC Service interfaces. Each length-dependent delay attribute specifies the time for a single octet of the frame to transfer from ingress to egress.

ieee8021TsnRemoteMgmtDependentDelayMax

1.3.111.2.802.1.1.32.1.1.1.1.6

Unsigned32

This attribute provides the maximum length-dependent delay from ingress port to egress port. It provides the portion of delay that is dependent on frame length, where frame length is the number of octets that transfer across the MAC Service interfaces. Each length-dependent delay attribute specifies the time for a single octet of the frame to transfer from ingress to egress.

ieee8021TsnRemoteMgmtPropagationDelayTable

1.3.111.2.802.1.1.32.1.2.1

Index: ieee8021BridgeBasePort

A table containing a set of parameters necessary to determine the delay along the network media (e.g. cable) for a frame transmitted from the specifed Port of this Bridge to the neighboring Port on a different Bridge. There is one Propagation Delay managed object per egress Port of a Bridge.

from IEEE8021-BRIDGE-MIB

ieee8021BridgeBasePort

IEEE8021BridgePortNumberAn integer that uniquely identifies a Bridge Port, as specified in 17.3.2.2. This value is used within the spanning tree protocol to identify this port to neighbor Bridges.Reference: 17.3.2.2 (1..65535) · Unsigned32 · hint d

The port number of the port for which this entry contains Bridge management information.

ieee8021TsnRemoteMgmtTxPropagationDelay

1.3.111.2.802.1.1.32.1.2.1.1.1

Unsigned32

This attribute provides the transmission propagation delay. The propagation delay begins when the message timestamp point of an egress frame passes the reference plane marking the boundary between the network media and PHY. It ends when the message timestamp point of an ingress frame on the neighboring Bridge's Port passes the reference plane marking the boundary between the network media and PHY. The message timestamp point is specified by IEEE Std 802.1AS for various media.

ieee8021TsnRemoteMgmtMsrpMrpExternalControlTable

1.3.111.2.802.1.1.32.1.4.1

Index: ieee8021BridgeBaseComponentId · ieee8021BridgeBasePort · ieee8021QBridgeVlanIndex

A table containing a set of parameters necessary for a network manager to 1) disable MRP attribute propagation (MAP) for the MRP Participant of a bridge port, 2) read MRP attribute registrations that the MRP Participant receives, and 3) write MRP attribute values for the MRP Participant to declare.

from IEEE8021-BRIDGE-MIB

ieee8021BridgeBaseComponentId

IEEE8021PbbComponentIdentifierThe component identifier is used to distinguish between the multiple virtual Bridge instances within a PB or PBB. Each virtual Bridge instance is called a component. In simple situations where there is only a single component the default value is 1. The component is identified by a component identifier unique within the BEB and by a MAC address unique within the PBBN. Each component is associated with a Backbone Edge Bridge (BEB) Configuration managed object.Reference: 12.3 l) (1..4294967295) · Unsigned32 · hint d

The component identifier is used to distinguish between the multiple virtual Bridge instances within a PBB. In simple situations where there is only a single component the default value is 1.

ieee8021BridgeBasePort

IEEE8021BridgePortNumberAn integer that uniquely identifies a Bridge Port, as specified in 17.3.2.2. This value is used within the spanning tree protocol to identify this port to neighbor Bridges.Reference: 17.3.2.2 (1..65535) · Unsigned32 · hint d

The port number of the port for which this entry contains Bridge management information.

from IEEE8021-Q-BRIDGE-MIB

ieee8021QBridgeVlanIndex

IEEE8021VlanIndexA value used to index per-VLAN tables: values of 0 and 4095 are not permitted. If the value is between 1 and 4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with global scope within a given bridged domain (see VlanId textual convention). If the value is greater than 4095, then it represents a VLAN with scope local to the particular agent, i.e., one without a global VLAN-ID assigned to it. Such VLANs are outside the scope of IEEE 802.1Q, but it is convenient to be able to manage them in the same way using this MIB.Reference: 9.6 (1..4094 | 4096..4294967295) · Unsigned32 · hint d

The VLAN-ID or other identifier referring to this VLAN.

ieee8021TsnRemoteMgmtMsrpMrpExternalControl

1.3.111.2.802.1.1.32.1.4.1.1.1

TruthValue1 = true2 = falseRepresents a boolean value. · Integer32

This attribute is used to indicate, whether MRP attributes are propagated on the MRP Participant, according to the specifications for MRP Attribute Propagation (MAP) and specifications of the MRP Application. When true(1), the MRP Participant is removed from the MRP Application's MAP Context. The MRP Participant performs all other aspects of MRP, including MRP operation, MRP specifications, and MRPDU encodings. The application component stores MAD indications for registration received on the Port, and invokes MAD requests for declarations on the Port. When false(2), MRP attributes propagate on the MRP Participant according to the specifications for MRP Attribute Propagation (MAP) and specifications of the MRP Application. Ports with the externalControl attribute false(2) are considered as candidates for the MRP Application's MAP Context. The remaining attributes of this subtree are ignored by Ports with the externalControl attribute false(2). This managed object applies to the MSRP application. A table is provided for each MAP Context (VLAN ID).

ieee8021TsnRemoteMgmtMrpIndicationList

1.3.111.2.802.1.1.32.1.4.1.1.2

OCTET STRING

This attribute is used to store the list of all joined MRP attributes for the MRP Participant when the ieee8021TsnRemoteMgmtMrpExternalControl attribute is true(1). When the ieee8021TsnRemoteMgmtMrpExternalControl attribute is false(2), this attribute is ignored by the MRP Participant, and returns the empty octet string.

ieee8021TsnRemoteMgmtMrpIndicationListLength

1.3.111.2.802.1.1.32.1.4.1.1.3

Unsigned32

This attribute is used to provide the number of octets in the ieee8021TsnRemoteMgmtMrpIndicationListLength attribute. When the ieee8021TsnRemoteMgmtMrpExternalControl attribute is false(2), this attribute returns zero.

ieee8021TsnRemoteMgmtMrpIndicationChangeCounter

1.3.111.2.802.1.1.32.1.4.1.1.4

Counter64 (0..18446744073709551615)

This attribute is used to provide the number of changes done to the ieee8021TsnRemoteMgmtMrpIndicationList. When the ieee8021TsnRemoteMgmtMrpExternalControl attribute is false(2), this attribute returns zero.

ieee8021TsnRemoteMgmtMrpAdminRequestList

1.3.111.2.802.1.1.32.1.4.1.1.5

OCTET STRING

This attribute is used to provide the administrative value of the current list of MAD requests for the MRP Participant (operRequestList). Each entry in this attribute is encoded as the attribute_type parameter as a single octet, followed by the length of the attribute_value parameter as a single octet, followed by a sequence of octets for the attribute_value parameter. When the ieee8021TsnRemoteMgmtMrpExternalControl attribute is true(1), this attribute is copied to the ieee8021TsnRemoteMgmtMrpOperRequestList attribute as soon as possible according to the implementation. When the ieee8021TsnRemoteMgmtMrpExternalControl attribute is false(2), this attribute is ignored by the MRP Participant, but it retains its value.

ieee8021TsnRemoteMgmtMrpAdminRequestListLength

1.3.111.2.802.1.1.32.1.4.1.1.6

Unsigned32

This attribute is used to provide the administrative value for the number of octets in the ieee8021TsnRemoteMgmtMrpAdminRequestList attribute. When the ieee8021TsnRemoteMgmtMrpExternalControl attribute is true(1), this attribute is copied to the ieee8021TsnRemoteMgmtMrpOperRequestListLength attribute at the same time that the ieee8021TsnRemoteMgmtMrpAdminRequestList attribute is copied to the ieee8021TsnRemoteMgmtMrpOperRequestList attribute. When the ieee8021TsnRemoteMgmtMrpExternalControl attribute is false(2), this attribute is ignored by the MRP Participant, but it retains its value.

ieee8021TsnRemoteMgmtMrpOperRequestList

1.3.111.2.802.1.1.32.1.4.1.1.7

OCTET STRING

This attribute is used to proivde the operational value of the current list of MAD requests for the MRP Participant.

ieee8021TsnRemoteMgmtMrpOperRequestListLength

1.3.111.2.802.1.1.32.1.4.1.1.8

Unsigned32

This attribute is used to provide the operational value of the ieee8021TsnRemoteMgmtMrpAdminRequestListLength attribute, and it is copied at the same time that ieee8021TsnRemoteMgmtMrpAdminRequestList attribute is copied to ieee8021TsnRemoteMgmtMrpOperRequestList.

↑ To TOC