EZ5 MIB Catalog

JUNIPER-ATM-MIB

2003-12-04

The Juniper enterprise MIB for ATM interfaces and VCs

Download JUNIPER-ATM-MIB.txt Open JUNIPER-ATM-MIB.txt in a new tab

TABLES (4)

Tables (4)

NameOID
jnxAtmIfTableaugments atmInterfaceConfTable (ATM-MIB)1.3.6.1.4.1.2636.3.10.1
jnxAtmVCTableaugments atmVclTable (ATM-MIB)1.3.6.1.4.1.2636.3.10.2
jnxAtmVpTableaugments atmVplTable (ATM-MIB)1.3.6.1.4.1.2636.3.10.3
jnxAtmTrunkTable1.3.6.1.4.1.2636.3.10.4

END OF TOC

Table details

jnxAtmIfTable

1.3.6.1.4.1.2636.3.10.1

augments atmInterfaceConfTable (ATM-MIB)

Index: ifIndex

This table contains config and stats parameters, one entry per physical interface (ATM port).

from IF-MIB

ifIndex

InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d

A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.

jnxAtmIfPortType

1.3.6.1.4.1.2636.3.10.1.1.1

INTEGER1 = other2 = oc33 = oc124 = t35 = e36 = oc48 · Integer32

The physical port type.

jnxAtmIfEncaps

1.3.6.1.4.1.2636.3.10.1.1.2

INTEGER1 = other2 = atmPvc3 = atmCccCellRelay · Integer32

ATM physical link layer encapsulation.

jnxAtmIfLpBackInfo

1.3.6.1.4.1.2636.3.10.1.1.3

INTEGER1 = noLoopBack2 = localLoopBack3 = remoteLoopBack · Integer32

Loop back config and type.

jnxAtmIfScrambleEnable

1.3.6.1.4.1.2636.3.10.1.1.4

INTEGER1 = enabled2 = disabled · Integer32

Shows whether scrambling is enabled or disabled

jnxAtmIfTxCellCount

1.3.6.1.4.1.2636.3.10.1.1.5

Counter64 (0..18446744073709551615)

The number of ATM cells transmitted by the interface. Includes Idle cells transmitted.

jnxAtmIfRxCellCount

1.3.6.1.4.1.2636.3.10.1.1.6

Counter64 (0..18446744073709551615)

The number of ATM cells received by the interface. Excludes Idle cells received.

jnxAtmIfTxIdleCellCount

1.3.6.1.4.1.2636.3.10.1.1.7

Counter64 (0..18446744073709551615)

The number of idle cells sent by the port. When the ATM interface has nothing to send, it sends idle cells to fill the time slot.

jnxAtmIfUncorrHCSErrs

1.3.6.1.4.1.2636.3.10.1.1.8

Counter64 (0..18446744073709551615)

The number of uncorrectable cell Header Check Sequence (HCS) Errors that occurred.

jnxAtmIfCorrHCSErrs

1.3.6.1.4.1.2636.3.10.1.1.9

Counter64 (0..18446744073709551615)

The number of correctable cell Header Check Sequence (HCS) Errors that occurred.

jnxAtmIfTxCellFIFOOverRuns

1.3.6.1.4.1.2636.3.10.1.1.10

Counter64 (0..18446744073709551615)

The number of overruns in the Transmit FIFO.

jnxAtmIfRxCellFIFOOverRuns

1.3.6.1.4.1.2636.3.10.1.1.11

Counter64 (0..18446744073709551615)

The number of overruns in the Receive FIFO.

jnxAtmIfRxCellFIFOUnderRuns

1.3.6.1.4.1.2636.3.10.1.1.12

Counter64 (0..18446744073709551615)

The number of underruns in the receive FIFO.

jnxAtmIfInInvalidVCCells

1.3.6.1.4.1.2636.3.10.1.1.13

Counter64 (0..18446744073709551615)

The number of Cells that arrived for non existent VC.

jnxAtmIfInNoBufferOAMCells

1.3.6.1.4.1.2636.3.10.1.1.14

Counter64 (0..18446744073709551615)

The number of received OAM cells or raw cells dropped because no buffers were available to handle them.

jnxAtmIfInNoBufDropPkts

1.3.6.1.4.1.2636.3.10.1.1.15

Counter64 (0..18446744073709551615)

The number of AAL5 packets dropped because there was no enough buffer to handle them.

jnxAtmIfOutVCQueueDrops

1.3.6.1.4.1.2636.3.10.1.1.16

Counter64 (0..18446744073709551615)

The number of packets dropped because of queue limits on each VC.

jnxAtmIfInBadCrcs

1.3.6.1.4.1.2636.3.10.1.1.17

Counter64 (0..18446744073709551615)

The total number of incoming CRC errors.

jnxAtmIfInLenErrPkts

1.3.6.1.4.1.2636.3.10.1.1.18

Counter64 (0..18446744073709551615)

The number of AAL5 packets dropped because their length was incorrect.

jnxAtmIfInTimeoutPkts

1.3.6.1.4.1.2636.3.10.1.1.19

Counter64 (0..18446744073709551615)

The number of AAL5 packets dropped because of reassembly timeout.

jnxAtmIfL2CircuitMode

1.3.6.1.4.1.2636.3.10.1.1.20

INTEGER1 = notApplicable2 = none3 = aal54 = cell5 = uniTrunk6 = nniTrunk · Integer32

The layer 2 circuit mode of this Atm interface. Note, this applies only to interfaces on AtmII pics.

jnxAtmVCTable

1.3.6.1.4.1.2636.3.10.2

augments atmVclTable (ATM-MIB)

Index: ifIndex · atmVclVpi · atmVclVci

A table of all p2p/p2mp/multicast VC entries.

from IF-MIB

ifIndex

InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d

A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.

from ATM-MIB

atmVclVpi

AtmVpIdentifierThe VPI value for a VPL or VCL. The value VPI=0 is only allowed for a VCL. For ATM UNIs supporting VPCs the VPI value ranges from 0 to 255. The VPI value 0 is supported for ATM UNIs conforming to the ATM Forum UNI 4.0 Annex 8 (Virtual UNIs) specification. For ATM UNIs supporting VCCs the VPI value ranges from 0 to 255. For ATM NNIs the VPI value ranges from 0 to 4095. The maximum VPI value cannot exceed the value allowable by atmInterfaceMaxVpiBits defined in ATM-MIB. (0..4095) · Integer32

The VPI value of the VCL.

atmVclVci

AtmVcIdentifierThe VCI value for a VCL. The maximum VCI value cannot exceed the value allowable by atmInterfaceMaxVciBits defined in ATM-MIB. (0..65535) · Integer32

The VCI value of the VCL.

jnxAtmVCConnType

1.3.6.1.4.1.2636.3.10.2.1.1

INTEGER1 = other2 = p2p3 = p2mp4 = multicast · Integer32

The type of connection. The type 'other' means vc type is unknown or is not one of the other types.

jnxAtmVCEncapsulation

1.3.6.1.4.1.2636.3.10.2.1.2

INTEGER1 = other2 = atmCccCellRelay3 = atmCccVcMux4 = atmCiscoNlpid5 = atmNlpid6 = atmSnap7 = atmVcMux8 = atmTccVcMux9 = atmTccSnap · Integer32

The atm encapsulation type associated with the VC. atmCccCellRelay : ATM Cell Relay for CCC atmCccVcMux : ATM VC for CCC atmCiscoNlpid : Cisco-compatible ATM NLPID encapsulation atmNlpid : ATM NLPID encapsulation atmSnap : ATM LLC/SNAP encapsulation atmVcMux : ATM VC multiplexing atmTccVcMux : TCC (Translational Cross Connection) over ATM VC MUX encapsulation atmTccSnap : TCC (Translational Cross Connection) over ATM LLC/SNAP encapsulation

jnxAtmVCMpDestIPv4Addr

1.3.6.1.4.1.2636.3.10.2.1.3

InetAddressIPv4Represents an IPv4 network address: Octets Contents Encoding 1-4 IPv4 address network-byte order The corresponding InetAddressType value is ipv4(1). This textual convention SHOULD NOT be used directly in object definitions, as it restricts addresses to a specific format. However, if it is used, it MAY be used either on its own or in conjunction with InetAddressType, as a pair. SIZE (4) · OCTET STRING · hint 1d.1d.1d.1d

This object is meaningful only if jnxAtmVCConnType value is 'p2mp' (point-to-multipoint). For a p2mp VC, it's the multipoint destination IPv4 address. When the VC connection type is other than p2mp OR when the multipoint destination address type is of IPv6, this object returns 0.0.0.0 by default.

jnxAtmVCMpDestIPv6Addr

1.3.6.1.4.1.2636.3.10.2.1.4

InetAddressIPv6Represents an IPv6 network address: Octets Contents Encoding 1-16 IPv6 address network-byte order The corresponding InetAddressType value is ipv6(2). This textual convention SHOULD NOT be used directly in object definitions, as it restricts addresses to a specific format. However, if it is used, it MAY be used either on its own or in conjunction with InetAddressType, as a pair. SIZE (16) · OCTET STRING · hint 2x:2x:2x:2x:2x:2x:2x:2x

This object is meaningful only if jnxAtmVCConnType value is 'p2mp' (point-to-multipoint). For a p2mp VC, it's the multipoint destination IPv6 address. When the VC connection type is other than p2mp OR when the multipoint destination address type is of IPv4, this object returns all the bytes of addr filled with 0.

jnxAtmVCFlags

1.3.6.1.4.1.2636.3.10.2.1.5

JnxAtmFlagsFlags related to the VC or Trunk. · BITS

Flags related to the VC.

jnxAtmVCTotalDownTime

1.3.6.1.4.1.2636.3.10.2.1.6

Integer32

The total VC down time in seconds ever since the system rebooted.

jnxAtmVCInBytes

1.3.6.1.4.1.2636.3.10.2.1.7

Counter64 (0..18446744073709551615)

The number of bytes received on the VC.

jnxAtmVCOutBytes

1.3.6.1.4.1.2636.3.10.2.1.8

Counter64 (0..18446744073709551615)

The number of bytes sent out on the VC.

jnxAtmVCInPkts

1.3.6.1.4.1.2636.3.10.2.1.9

Counter64 (0..18446744073709551615)

The number of packets received on the VC.

jnxAtmVCOutPkts

1.3.6.1.4.1.2636.3.10.2.1.10

Counter64 (0..18446744073709551615)

The number of packets sent out on the VC.

jnxAtmVCTailQueuePktDrops

1.3.6.1.4.1.2636.3.10.2.1.11

Counter64 (0..18446744073709551615)

The number of packets dropped due to bandwidth constraints. Indicates that packets were queued to send out at a rate faster than allowed.

jnxAtmVCOAMPeriod

1.3.6.1.4.1.2636.3.10.2.1.12

Integer32

This time interval indicates how often the F5 cells are sent to know the status of the VC.

jnxAtmVCOAMUpCellCount

1.3.6.1.4.1.2636.3.10.2.1.13

Integer32

The minimum number of loopback cells to be received to declare that the VC is up.

jnxAtmVCOAMDownCellCount

1.3.6.1.4.1.2636.3.10.2.1.14

Integer32

The minimum number of loopback cells to be received to declare that the VC is down. This object would have zero value if OAM is not enabled. (indicated in jnxAtmVCFlags)

jnxAtmVCInOAMF5LoopCells

1.3.6.1.4.1.2636.3.10.2.1.15

Counter32

The number of OAM F5 loopback cells received. This object would have zero value if OAM (as indicated in jnxAtmVCFlags) is not enabled.

jnxAtmVCOutOAMF5LoopCells

1.3.6.1.4.1.2636.3.10.2.1.16

Counter32

The number of OAM F5 loopback cells sent. This object would have zero value if OAM (as indicated in jnxAtmVCFlags) is not enabled.

jnxAtmVCInOAMF5RDICells

1.3.6.1.4.1.2636.3.10.2.1.17

Counter32

The number of OAM F5 cells received, with RDI(Remote Defect Indication) bit set. This object would have zero value if OAM (as indicated in jnxAtmVCFlags) is not enabled.

jnxAtmVCOutOAMF5RDICells

1.3.6.1.4.1.2636.3.10.2.1.18

Counter32

The number of OAM F5 cells transmitted, with RDI(Remote Defect Indication) bit set. This object would have zero value if OAM (as indicated in jnxAtmVCFlags) is not enabled.

jnxAtmVCInOAMF5AISCells

1.3.6.1.4.1.2636.3.10.2.1.19

Counter32

The number of OAM F5 cells received, with AIS(Alarm Indication Signal) bit set. This object would have zero value if OAM (as indicated in jnxAtmVCFlags) is not enabled.

jnxAtmVCOutOAMF5AISCells

1.3.6.1.4.1.2636.3.10.2.1.20

Counter32

The number of OAM F5 cells transmitted, with AIS (Alarm Indication Signal) bit set. This object would have zero value if OAM (as indicated in jnxAtmVCFlags) is not enabled.

jnxAtmVpTable

1.3.6.1.4.1.2636.3.10.3

augments atmVplTable (ATM-MIB)

Index: ifIndex · atmVplVpi

The table of ATM VPs. This table augments atmVplTable defined in standard ATM mib.

from IF-MIB

ifIndex

InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d

A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.

from ATM-MIB

atmVplVpi

AtmVpIdentifierThe VPI value for a VPL or VCL. The value VPI=0 is only allowed for a VCL. For ATM UNIs supporting VPCs the VPI value ranges from 0 to 255. The VPI value 0 is supported for ATM UNIs conforming to the ATM Forum UNI 4.0 Annex 8 (Virtual UNIs) specification. For ATM UNIs supporting VCCs the VPI value ranges from 0 to 255. For ATM NNIs the VPI value ranges from 0 to 4095. The maximum VPI value cannot exceed the value allowable by atmInterfaceMaxVpiBits defined in ATM-MIB. (0..4095) · Integer32

The VPI value of the VPL.

jnxAtmVpFlags

1.3.6.1.4.1.2636.3.10.3.1.1

BITS

The flags associated with this VP.

jnxAtmVpTotalDownTime

1.3.6.1.4.1.2636.3.10.3.1.2

Integer32

The total VP downtime in seconds, ever since the system rebooted.

jnxAtmVpOamPeriod

1.3.6.1.4.1.2636.3.10.3.1.3

Integer32

This time interval indicates how often the OAM F4 cells are sent to determine the status of the VP. The value of this object is zero when OAM is not enabled on the VP. Object 'jnxAtmVpFlags' can be used to determine if OAM is enabled.

jnxAtmVpOamUpCellCount

1.3.6.1.4.1.2636.3.10.3.1.4

Integer32

The minimum number of consecutive loopback cells to be received to declare that the VP is up. The value of this object is zero when OAM is not enabled on the VP. Object 'jnxAtmVpFlags' can be used to determine if OAM is enabled.

jnxAtmVpOamDownCellCount

1.3.6.1.4.1.2636.3.10.3.1.5

Integer32

The minimum number of consecutive loopback cells to be received to declare that the VP is down. The value of this object is zero when OAM is not enabled on the VP. Object 'jnxAtmVpFlags' can be used to determine if OAM is enabled.

jnxAtmVpInBytes

1.3.6.1.4.1.2636.3.10.3.1.6

Counter64 (0..18446744073709551615)

The number of bytes received on the VP.

jnxAtmVpOutBytes

1.3.6.1.4.1.2636.3.10.3.1.7

Counter64 (0..18446744073709551615)

The number of bytes sent out on the VP.

jnxAtmVpInPkts

1.3.6.1.4.1.2636.3.10.3.1.8

Counter64 (0..18446744073709551615)

The number of packets received on the VP.

jnxAtmVpOutPkts

1.3.6.1.4.1.2636.3.10.3.1.9

Counter64 (0..18446744073709551615)

The number of packets sent out on the VP.

jnxAtmVpInOamF4Cells

1.3.6.1.4.1.2636.3.10.3.1.10

Counter32

The number of OAM F4 cells received on the VP.

jnxAtmVpOutOamF4Cells

1.3.6.1.4.1.2636.3.10.3.1.11

Counter32

The number of OAM F4 cells transmitted on the VP.

jnxAtmVpInOamF4LoopCells

1.3.6.1.4.1.2636.3.10.3.1.12

Counter32

The number of OAM F4 loopback cells received on the VP.

jnxAtmVpOutOamF4LoopCells

1.3.6.1.4.1.2636.3.10.3.1.13

Counter32

The number of OAM F4 cells transmitted on the VP.

jnxAtmVpInOamF4RdiCells

1.3.6.1.4.1.2636.3.10.3.1.14

Counter32

The number of OAM F4 RDI cells received on the VP.

jnxAtmVpOutOamF4RdiCells

1.3.6.1.4.1.2636.3.10.3.1.15

Counter32

The number of OAM F4 RDI cells transmitted on the VP.

jnxAtmVpInOamF4AisCells

1.3.6.1.4.1.2636.3.10.3.1.16

Counter32

The number of OAM F4 AIS cells received on the VP.

jnxAtmTrunkTable

1.3.6.1.4.1.2636.3.10.4

Index: ifIndex

A table of all ATM Trunk entries.

from IF-MIB

ifIndex

InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d

A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.

jnxAtmTrunkId

1.3.6.1.4.1.2636.3.10.4.1.1

Integer32

The identifier for this ATM Trunk.

jnxAtmTrunkConnType

1.3.6.1.4.1.2636.3.10.4.1.2

INTEGER1 = other2 = p2p · Integer32

The type of connection. The type 'other' means trunk type is unknown or is not one of the other types.

jnxAtmTrunkEncapsulation

1.3.6.1.4.1.2636.3.10.4.1.3

INTEGER1 = other2 = atmCccCellRelay · Integer32

The atm encapsulation type associated with the VC or Trunk. atmCccCellRelay : ATM Cell Relay for CCC

jnxAtmTrunkFlags

1.3.6.1.4.1.2636.3.10.4.1.4

JnxAtmFlagsFlags related to the VC or Trunk. · BITS

Flags related to the Trunk.

jnxAtmTrunkTotalDownTime

1.3.6.1.4.1.2636.3.10.4.1.5

Integer32

The total Trunk down time in seconds ever since the system rebooted.

jnxAtmTrunkInBytes

1.3.6.1.4.1.2636.3.10.4.1.6

Counter64 (0..18446744073709551615)

The number of bytes received on the Trunk.

jnxAtmTrunkOutBytes

1.3.6.1.4.1.2636.3.10.4.1.7

Counter64 (0..18446744073709551615)

The number of bytes sent out on the Trunk.

jnxAtmTrunkInPkts

1.3.6.1.4.1.2636.3.10.4.1.8

Counter64 (0..18446744073709551615)

The number of packets received on the Trunk.

jnxAtmTrunkOutPkts

1.3.6.1.4.1.2636.3.10.4.1.9

Counter64 (0..18446744073709551615)

The number of packets sent out on the Trunk.

jnxAtmTrunkTailQueuePktDrops

1.3.6.1.4.1.2636.3.10.4.1.10

Counter64 (0..18446744073709551615)

The number of packets dropped due to bandwidth constraints. Indicates that packets were queued to send out at a rate faster than allowed.

jnxAtmTrunkInOAMF4AISCells

1.3.6.1.4.1.2636.3.10.4.1.15

Counter32

The number of OAM F4 cells received, with AIS(Alarm Indication Signal) bit set.

jnxAtmTrunkOutOAMF4AISCells

1.3.6.1.4.1.2636.3.10.4.1.16

Counter32

The number of OAM F4 cells sent, with AIS(Alarm Indication Signal) bit set.

↑ To TOC