EZ5 MIB Catalog

JUNIPER-BFD-MIB

2006-10-12

Provides BFD specific data.

Download JUNIPER-BFD-MIB.txt Open JUNIPER-BFD-MIB.txt in a new tab

SCALARS (1) · TABLES (1) · TRAPS (2)

Scalars (1)

NameOID
jnxBfdSessifName1.3.6.1.4.1.2636.3.45.1.2.1

Tables (1)

NameOID
jnxBfdSessTable1.3.6.1.4.1.2636.3.45.1.1.1

Traps (2)

NameOID
jnxBfdSessTxIntervalHigh1.3.6.1.4.1.2636.3.45.1.0.1
jnxBfdSessDetectionTimeHigh1.3.6.1.4.1.2636.3.45.1.0.2

END OF TOC

Scalar details

jnxBfdSessifName

1.3.6.1.4.1.2636.3.45.1.2.1

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

This object gives the Interface Name in the bfdSessUp and bfdSessDown trap. Even though this object doesnt appear in the OBJECTS list of these traps, but the agent relay this information as an extra parameter in the trap.

Table details

jnxBfdSessTable

1.3.6.1.4.1.2636.3.45.1.1.1

Index: bfdSessIndex

Defines the jnxBfd Session Table for providing enterprise specific options to the corresponding bfdSessTable entry.

from BFD-STD-MIB

bfdSessIndex

BfdSessIndexTCAn index used to uniquely identify BFD sessions. (1..4294967295) · Unsigned32 · hint d

This object contains an index used to represent a unique BFD session on this device.

jnxBfdSessThreshTxInterval

1.3.6.1.4.1.2636.3.45.1.1.1.1.1

Unsigned32 · microseconds

The threshold value for transmit interval in microseconds. If the current transmit interval value adapts to a value greater than the threshold value, jnxBfdSessTxIntervalHigh trap is raised.

jnxBfdSessCurrTxInterval

1.3.6.1.4.1.2636.3.45.1.1.1.1.2

Unsigned32 · microseconds

The current transmit interval in microseconds.

jnxBfdSessThreshDectTime

1.3.6.1.4.1.2636.3.45.1.1.1.1.3

Unsigned32 · microseconds

The threshold value for detection time in microseconds. If the current detection time value is greater than the threshold value at the time when session state changes to up(1), jnxBfdSessDetectionTimeHigh trap is raised.

jnxBfdSessCurrDectTime

1.3.6.1.4.1.2636.3.45.1.1.1.1.4

Unsigned32 · microseconds

The actual value of detection time for the session.

jnxBfdSessIntfName

1.3.6.1.4.1.2636.3.45.1.1.1.1.5

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

This object specifies the interface associated with the bfd session

Trap details

jnxBfdSessTxIntervalHigh

1.3.6.1.4.1.2636.3.45.1.0.1

This notification is generated when the threshold value for transmit interval (jnxBfdSessThreshTxInterval) is set and the bfd session transmit interval (jnxBfdSessCurrTxInterval) adapts to a value greater than the threshold value. This trap is sent only once, when we first exceed the threshold. The transmit interval can continue to adapt beyond the threshold value. Adaptation of transmit interval happens due to network issues causing the BFD session to go down on either the local system or the remote neighbor.

jnxBfdSessThreshTxInterval

1.3.6.1.4.1.2636.3.45.1.1.1.1.1

Unsigned32 · microseconds

The threshold value for transmit interval in microseconds. If the current transmit interval value adapts to a value greater than the threshold value, jnxBfdSessTxIntervalHigh trap is raised.

jnxBfdSessCurrTxInterval

1.3.6.1.4.1.2636.3.45.1.1.1.1.2

Unsigned32 · microseconds

The current transmit interval in microseconds.

jnxBfdSessDetectionTimeHigh

1.3.6.1.4.1.2636.3.45.1.0.2

This notification is generated when the threshold value for detection time (jnxBfdSessThreshDectTime) is set and the bfd session detection-time (jnxBfdSessCurrDectTime) adapts to a value greater than the threshold value. This trap is sent only once, when we first exceed the threshold. The detection-time can continue to adapt beyond the threshold value. Adaptation of detection-time happens due to network issues causing the BFD session to go down on either the local system or the remote neighbor.

jnxBfdSessThreshDectTime

1.3.6.1.4.1.2636.3.45.1.1.1.1.3

Unsigned32 · microseconds

The threshold value for detection time in microseconds. If the current detection time value is greater than the threshold value at the time when session state changes to up(1), jnxBfdSessDetectionTimeHigh trap is raised.

jnxBfdSessCurrDectTime

1.3.6.1.4.1.2636.3.45.1.1.1.1.4

Unsigned32 · microseconds

The actual value of detection time for the session.

↑ To TOC