jnxCmCfgChgLatestIndex
1.3.6.1.4.1.2636.3.18.1.1
Integer32 (1..2147483647)
The index in jnxCmCfgChgEventTable for the latest configuration change event.
JUNIPER-CFGMGMT-MIB
2003-10-24
This MIB module defines objects used for managing the configuration of Juniper products.
Download JUNIPER-CFGMGMT-MIB.txt Open JUNIPER-CFGMGMT-MIB.txt in a new tab
SCALARS (11) · TABLES (1) · TRAPS (2)
Scalars (11)
Tables (1)
| Name | OID |
|---|---|
| jnxCmCfgChgEventTable | 1.3.6.1.4.1.2636.3.18.1.7 |
Traps (2)
| Name | OID |
|---|---|
| jnxCmCfgChange | 1.3.6.1.4.1.2636.4.5.0.1 |
| jnxCmRescueChange | 1.3.6.1.4.1.2636.4.5.0.2 |
END OF TOC
Scalar details
jnxCmCfgChgLatestTime
1.3.6.1.4.1.2636.3.18.1.2
TimeTicks
The value of sysUpTime when the configuration was last changed. If the management subsystem was reset after the last configuration change, this object will return 0.
jnxCmCfgChgLatestDate
1.3.6.1.4.1.2636.3.18.1.3
DateAndTimeA date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC* 0..13 10 11 minutes from UTC 0..59 * Notes: - the value of year is in network-byte order - daylight saving time in New Zealand is +13 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 Note that if only local time is known, then timezone information (fields 8-10) is not present. SIZE (8 | 11) · OCTET STRING · hint 2d-1d-1d,1d:1d:1d.1d,1a1d:1d
The date and time when the configuration was last changed.
jnxCmCfgChgLatestSource
1.3.6.1.4.1.2636.3.18.1.4
JnxCmCfChgSource1 = other2 = cli3 = junoscript4 = synchronize5 = snmp6 = button7 = autoinstall8 = unknownIdentifies the source of config event. · Integer32
The source of the configuration event.
jnxCmCfgChgLatestUser
1.3.6.1.4.1.2636.3.18.1.5
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The name of the logged in user. The length is zero if not available or not applicable.
jnxCmCfgChgMaxEventEntries
1.3.6.1.4.1.2636.3.18.1.6
Integer32 (0..2147483647)
The maximum number of entries that can be held in jnxCmCfgChgEventTable.
jnxCmRescueChgTime
1.3.6.1.4.1.2636.3.18.2.1
TimeTicks
The value of sysUpTime when the rescue configuration was last changed. If the management subsystem was reset after the last configuration change, this object will return 0.
jnxCmRescueChgDate
1.3.6.1.4.1.2636.3.18.2.2
DateAndTimeA date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC* 0..13 10 11 minutes from UTC 0..59 * Notes: - the value of year is in network-byte order - daylight saving time in New Zealand is +13 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 Note that if only local time is known, then timezone information (fields 8-10) is not present. SIZE (8 | 11) · OCTET STRING · hint 2d-1d-1d,1d:1d:1d.1d,1a1d:1d
The date and time when the rescue configuration was last changed.
jnxCmRescueChgSource
1.3.6.1.4.1.2636.3.18.2.3
JnxCmCfChgSource1 = other2 = cli3 = junoscript4 = synchronize5 = snmp6 = button7 = autoinstall8 = unknownIdentifies the source of config event. · Integer32
The source of the rescue configuration event.
jnxCmRescueChgUser
1.3.6.1.4.1.2636.3.18.2.4
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The name of the logged in user. The length is zero if not available or not applicable.
jnxCmRescueChgState
1.3.6.1.4.1.2636.3.18.2.5
JnxCmRescueCfgState1 = nonexistant2 = updatedIdentifies the state of the rescue configuration. · Integer32
The current state of the rescue configuration.
Table details
jnxCmCfgChgEventTable
1.3.6.1.4.1.2636.3.18.1.7
Index: jnxCmCfgChgEventIndex
A table of configuration events on this router.
jnxCmCfgChgEventIndex
1.3.6.1.4.1.2636.3.18.1.7.1.1
Integer32 (1..2147483647)
This object identifies a specific configuration change event. Monotonically increasing values will be assigned by the snmp subsystem to each event as it occurs. If the snmp subsystem is reset, these index values will be reset as well.
jnxCmCfgChgEventTime
1.3.6.1.4.1.2636.3.18.1.7.1.2
TimeTicks
The value of sysUpTime when the event occurred.
jnxCmCfgChgEventDate
1.3.6.1.4.1.2636.3.18.1.7.1.3
DateAndTimeA date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC* 0..13 10 11 minutes from UTC 0..59 * Notes: - the value of year is in network-byte order - daylight saving time in New Zealand is +13 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 Note that if only local time is known, then timezone information (fields 8-10) is not present. SIZE (8 | 11) · OCTET STRING · hint 2d-1d-1d,1d:1d:1d.1d,1a1d:1d
The system date and time when the event occurred.
jnxCmCfgChgEventSource
1.3.6.1.4.1.2636.3.18.1.7.1.4
JnxCmCfChgSource1 = other2 = cli3 = junoscript4 = synchronize5 = snmp6 = button7 = autoinstall8 = unknownIdentifies the source of config event. · Integer32
The source of the configuration event.
jnxCmCfgChgEventUser
1.3.6.1.4.1.2636.3.18.1.7.1.5
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The name of the logged in user. The length is zero if not available or not applicable.
jnxCmCfgChgEventLog
1.3.6.1.4.1.2636.3.18.1.7.1.6
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The log of the configuration event. The length is zero if not available.
Trap details
jnxCmCfgChange
1.3.6.1.4.1.2636.4.5.0.1
Notification of a configuration management event as recorded in jnxCmCfgChgEventTable.
jnxCmCfgChgEventTime
1.3.6.1.4.1.2636.3.18.1.7.1.2
TimeTicks
The value of sysUpTime when the event occurred.
jnxCmCfgChgEventDate
1.3.6.1.4.1.2636.3.18.1.7.1.3
DateAndTimeA date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC* 0..13 10 11 minutes from UTC 0..59 * Notes: - the value of year is in network-byte order - daylight saving time in New Zealand is +13 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 Note that if only local time is known, then timezone information (fields 8-10) is not present. SIZE (8 | 11) · OCTET STRING · hint 2d-1d-1d,1d:1d:1d.1d,1a1d:1d
The system date and time when the event occurred.
jnxCmCfgChgEventSource
1.3.6.1.4.1.2636.3.18.1.7.1.4
JnxCmCfChgSource1 = other2 = cli3 = junoscript4 = synchronize5 = snmp6 = button7 = autoinstall8 = unknownIdentifies the source of config event. · Integer32
The source of the configuration event.
jnxCmCfgChgEventUser
1.3.6.1.4.1.2636.3.18.1.7.1.5
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The name of the logged in user. The length is zero if not available or not applicable.
jnxCmCfgChgEventLog
1.3.6.1.4.1.2636.3.18.1.7.1.6
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The log of the configuration event. The length is zero if not available.
jnxCmRescueChange
1.3.6.1.4.1.2636.4.5.0.2
Notification of the latest rescue configuration change.
jnxCmRescueChgTime
1.3.6.1.4.1.2636.3.18.2.1
TimeTicks
The value of sysUpTime when the rescue configuration was last changed. If the management subsystem was reset after the last configuration change, this object will return 0.
jnxCmRescueChgDate
1.3.6.1.4.1.2636.3.18.2.2
DateAndTimeA date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC* 0..13 10 11 minutes from UTC 0..59 * Notes: - the value of year is in network-byte order - daylight saving time in New Zealand is +13 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 Note that if only local time is known, then timezone information (fields 8-10) is not present. SIZE (8 | 11) · OCTET STRING · hint 2d-1d-1d,1d:1d:1d.1d,1a1d:1d
The date and time when the rescue configuration was last changed.
jnxCmRescueChgSource
1.3.6.1.4.1.2636.3.18.2.3
JnxCmCfChgSource1 = other2 = cli3 = junoscript4 = synchronize5 = snmp6 = button7 = autoinstall8 = unknownIdentifies the source of config event. · Integer32
The source of the rescue configuration event.
jnxCmRescueChgUser
1.3.6.1.4.1.2636.3.18.2.4
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The name of the logged in user. The length is zero if not available or not applicable.
jnxCmRescueChgState
1.3.6.1.4.1.2636.3.18.2.5
JnxCmRescueCfgState1 = nonexistant2 = updatedIdentifies the state of the rescue configuration. · Integer32
The current state of the rescue configuration.