DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The textual name of the DFC interface.
jnxDfcInputPktRate
1.3.6.1.4.1.2636.3.33.3.2
Unsigned32
data packet rate (in packets per second).
jnxDfcPpsSoftOverloadLowWatermark
1.3.6.1.4.1.2636.3.33.3.3
Unsigned32
Configured lowest value for data packet rate (in packets per second).
jnxDfcPpsSoftOverloadHighWatermark
1.3.6.1.4.1.2636.3.33.3.4
Unsigned32
Configured highest value for data packet rate (in packets per second).
jnxDfcPpsHardOverloadLowWatermark
1.3.6.1.4.1.2636.3.33.3.5
Unsigned32
Recommended lowest value for data packet rate (in packets per second).
jnxDfcPpsHardOverloadHighWatermark
1.3.6.1.4.1.2636.3.33.3.6
Unsigned32
Recommended highest value for data packet rate (in packets per second).
jnxDfcFlowsUsage
1.3.6.1.4.1.2636.3.33.3.7
Unsigned32 · percent
% usage of total number of flows in system.
jnxDfcCriteriaUsage
1.3.6.1.4.1.2636.3.33.3.8
Unsigned32 · percent
% usage of matching criteria for all filters.
jnxDfcMemSoftOverloadLowWatermark
1.3.6.1.4.1.2636.3.33.3.9
Unsigned32 · percent
Configured lowest watermark percent for memory load.
jnxDfcMemSoftOverloadHighWatermark
1.3.6.1.4.1.2636.3.33.3.10
Unsigned32 · percent
Configured highest watermark percent for memory load.
jnxDfcFlowLowWatermark
1.3.6.1.4.1.2636.3.33.3.11
Unsigned32
Recommended lowest value for number of flows allowed in the system.
jnxDfcFlowHighWatermark
1.3.6.1.4.1.2636.3.33.3.12
Unsigned32
Recommended highest value for number of flows allowed in the system.
jnxDfcCriteriaLowWatermark
1.3.6.1.4.1.2636.3.33.3.13
Unsigned32
Recommended lowest value for number of criterias allowed in the system.
jnxDfcCriteriaHighWatermark
1.3.6.1.4.1.2636.3.33.3.14
Unsigned32
Recommended highest value for number of criterias allowed in the system.
Table details
jnxDfcCSTable
1.3.6.1.4.1.2636.3.33.1
Index: jnxDfcGrpName · jnxDfcCSId
Statistics information for Control Source.
jnxDfcGrpName
1.3.6.1.4.1.2636.3.33.1.1.1
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..64) · OCTET STRING · hint 255a
The name assigned to a DFC group. A DFC group defines a set of DFC PICs that share same static/dynamic configuration.
jnxDfcCSId
1.3.6.1.4.1.2636.3.33.1.1.2
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..48) · OCTET STRING · hint 255a
Control Source identifier. Control Source identifies Juniper router with one unique Control IP address. There can be multiple IP addresses from which a Control Source can send Control protocol request to Juniper router.
jnxDfcCSControlProtocolAddRequests
1.3.6.1.4.1.2636.3.33.1.1.3
Counter64 (0..18446744073709551615)
Total number of Control protocol Add requests received. The add request specifies a new filter criteria to be merged with the existing tasking list for a given Control Source and Content Destination.
jnxDfcCSCriteriaAdded
1.3.6.1.4.1.2636.3.33.1.1.4
Counter64 (0..18446744073709551615)
Total number of filter criteria added successfully by the Control Source.
jnxDfcCSCriteriaAdditionFailed
1.3.6.1.4.1.2636.3.33.1.1.5
Counter64 (0..18446744073709551615)
Total number of filter criteria addition failed.
jnxDfcCSControlProtocolDeleteRequests
1.3.6.1.4.1.2636.3.33.1.1.6
Counter64 (0..18446744073709551615)
Total number of Control protocol delete requests received. The delete request removes a particular filter criterion.
jnxDfcCSCriteriaDeleted
1.3.6.1.4.1.2636.3.33.1.1.7
Counter64 (0..18446744073709551615)
Total number of filter criteria deleted successfully as requested by Control Source.
jnxDfcCSCriteriaDeletionFailed
1.3.6.1.4.1.2636.3.33.1.1.8
Counter64 (0..18446744073709551615)
Total number of filter criteria deletion failed.
jnxDfcCSCriteriaDeletedTimeoutIdle
1.3.6.1.4.1.2636.3.33.1.1.9
Counter64 (0..18446744073709551615)
Total number of criteria deleted by timeout idle.
jnxDfcCSCriteriaDeletedTimeoutTotal
1.3.6.1.4.1.2636.3.33.1.1.10
Counter64 (0..18446744073709551615)
Total number of criteria deleted by timeout total.
jnxDfcCSCriteriaDeletedPackets
1.3.6.1.4.1.2636.3.33.1.1.11
Counter64 (0..18446744073709551615)
Total number of criteria deleted by packets.
jnxDfcCSCriteriaDeletedBytes
1.3.6.1.4.1.2636.3.33.1.1.12
Counter64 (0..18446744073709551615)
Total number of criteria deleted by bytes.
jnxDfcCSControlProtocolRefreshRequests
1.3.6.1.4.1.2636.3.33.1.1.13
Counter64 (0..18446744073709551615)
Total number of Control protocol Refresh requests received. The refresh request updates the timeout for a particular filter criterion or set of filter criteria for the particular Control Source to a particular Content Destination.
jnxDfcCSCriteriaRefreshed
1.3.6.1.4.1.2636.3.33.1.1.14
Counter64 (0..18446744073709551615)
Total number of filter criteria refreshed successfully as requested by Control Source.
jnxDfcCSCriteriaRefreshFailed
1.3.6.1.4.1.2636.3.33.1.1.15
Counter64 (0..18446744073709551615)
Total number of filter criteria refresh request failed.
jnxDfcCSControlProtocolListRequests
1.3.6.1.4.1.2636.3.33.1.1.16
Counter64 (0..18446744073709551615)
Total number of Control protocol List requests received. The List request returns a list of all criteria that a particular Control Source has added and are currently active.
jnxDfcCSListSuccess
1.3.6.1.4.1.2636.3.33.1.1.17
Counter64 (0..18446744073709551615)
Total number of list commands processed successfully as requested by Control Source.
jnxDfcCSListFailed
1.3.6.1.4.1.2636.3.33.1.1.18
Counter64 (0..18446744073709551615)
Total number of list commands that could not be processed successfully.
jnxDfcCSControlProtocolNoopRequests
1.3.6.1.4.1.2636.3.33.1.1.19
Counter64 (0..18446744073709551615)
Total number of Control protocol Noop requests received. The purpose of this request is to verify the end-to-end connectivity between Control Source and DFC PIC.
jnxDfcCSNoopSuccess
1.3.6.1.4.1.2636.3.33.1.1.20
Counter64 (0..18446744073709551615)
Total number of Noop requests processed successfully as requested by Control Source.
jnxDfcCSNoopFailed
1.3.6.1.4.1.2636.3.33.1.1.21
Counter64 (0..18446744073709551615)
Total number of Noop requests that could not be processed successfully.
jnxDfcCSDynamicCriteriaActive
1.3.6.1.4.1.2636.3.33.1.1.22
Counter64 (0..18446744073709551615)
Total number of active dynamic filter criteria.
jnxDfcCSStaticCriteriaActive
1.3.6.1.4.1.2636.3.33.1.1.23
Counter64 (0..18446744073709551615)
Total number of active static filter criteria.
jnxDfcCSBadRequest
1.3.6.1.4.1.2636.3.33.1.1.24
Counter64 (0..18446744073709551615)
Total number of Bad requests received.
jnxDfcCSResponseSuccessful
1.3.6.1.4.1.2636.3.33.1.1.25
Counter64 (0..18446744073709551615)
Total number of successful response(s) corresponding to the requests (add, delete, refresh, list and noop) sent out to the Control Source.
jnxDfcCSResponseImproperCriteria
1.3.6.1.4.1.2636.3.33.1.1.26
Counter64 (0..18446744073709551615)
Total number of response(s) generated because of improper filter criterion specification in the add request.
jnxDfcCSResponseUnknownContentDest
1.3.6.1.4.1.2636.3.33.1.1.27
Counter64 (0..18446744073709551615)
Total number of response(s) generated because of unknown Content Destination specified in the add, delete, refresh and list request.
jnxDfcCSResponseUnknownCriteriaId
1.3.6.1.4.1.2636.3.33.1.1.28
Counter64 (0..18446744073709551615)
Total number of response(s) generated because of unknown Criteria Identifier specified in the delete, refresh and list request.
jnxDfcCSResponseImproperTimeout
1.3.6.1.4.1.2636.3.33.1.1.29
Counter64 (0..18446744073709551615)
Total number of response(s) generated because of improper timeout specified in the add and refresh request.
jnxDfcCSResponseInvalidAuthentication
1.3.6.1.4.1.2636.3.33.1.1.30
Counter64 (0..18446744073709551615)
Total number of response(s) generated because of invalid authentication specified in the add, delete, refresh, list and noop request.
jnxDfcCSResponseInvalidSequenceNumber
1.3.6.1.4.1.2636.3.33.1.1.31
Counter64 (0..18446744073709551615)
Total number of response(s) generated because of invalid Sequence Number specified in the add, delete, refresh, list and noop request.
jnxDfcCSResponseInternalError
1.3.6.1.4.1.2636.3.33.1.1.32
Counter64 (0..18446744073709551615)
Total number of response(s) generated because of internal error at the DFC PIC in processing a request.
jnxDfcCSNotificationRestart
1.3.6.1.4.1.2636.3.33.1.1.33
Counter64 (0..18446744073709551615)
Total number of Restart notifications sent to configured notification-recipients. This notification will be generated when the system experiences a failure such that all the DFC filter criteria are lost.
jnxDfcCSNotificationRollover
1.3.6.1.4.1.2636.3.33.1.1.34
Counter64 (0..18446744073709551615)
Total number of Rollover notifications sent to configured notification-recipients. This notification will be generated when the DFC PIC experiences a sequence number rollover.
jnxDfcCSNotificationNoop
1.3.6.1.4.1.2636.3.33.1.1.35
Counter64 (0..18446744073709551615)
Total number of Noop notifications sent to configured notification-recipents. This notification will be generated when the DFC PIC receives a Noop message with the SendAsync parameter present.
jnxDfcCSNotificationTimeout
1.3.6.1.4.1.2636.3.33.1.1.36
Counter64 (0..18446744073709551615)
Total number of Timeout notifications sent to configured notification-recipents. This notification will be generated when the DFC PIC times out a filter criterion on any one of its configured timeout parameters and the criterion contains a SendTimeoutAsync parameter.
jnxDfcCSNotificationCongestion
1.3.6.1.4.1.2636.3.33.1.1.37
Counter64 (0..18446744073709551615)
Total number of Congestion notifications sent to configured notification-recipents. This notification will be generated when the 10-second average packet forwarding rate (in bits/second) summed over all active filter criteria to a configured Content Destination exceeds the configured soft limit for that destination.
jnxDfcCSNotificationCongestionDelete
1.3.6.1.4.1.2636.3.33.1.1.38
Counter64 (0..18446744073709551615)
Total number of Congestion Delete notifications sent to configured notification-recipents. This notification will be generated when the total 10-second average packet forwarding rate (in bits/second) summed over all active filter criteria to a configured Content Destination exceeds the configured hard limit for that destination.
jnxDfcCSNotificationDuplicatesDropped
1.3.6.1.4.1.2636.3.33.1.1.39
Counter64 (0..18446744073709551615)
Total number of Duplicates Dropped notifications sent to configured notification-recipents. This notification will be generated when the configurable Maximum Duplicates parameter has been exceeded in such a way as to cause packets matching criteria added by the corresponding Control Source to be dropped.
jnxDfcCSAddRequestRate
1.3.6.1.4.1.2636.3.33.1.1.40
Counter64 (0..18446744073709551615)
The request processing rate (requests processed/second).
jnxDfcCSAddRequestPeakRate
1.3.6.1.4.1.2636.3.33.1.1.41
Counter64 (0..18446744073709551615)
The peak request processing rate (requests processed/second).
jnxDfcCSAggrCriteriaBandwidth
1.3.6.1.4.1.2636.3.33.1.1.42
Counter64 (0..18446744073709551615)
Bandwidth in bits/second.
jnxDfcCSSequenceNumber
1.3.6.1.4.1.2636.3.33.1.1.43
Counter64 (0..18446744073709551615)
Protocol sequence number.
jnxDfcCDTable
1.3.6.1.4.1.2636.3.33.2
Index: jnxDfcGrpName · jnxDfcCDId
Statistics information for content destination.
jnxDfcCDId
1.3.6.1.4.1.2636.3.33.2.1.1
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..48) · OCTET STRING · hint 255a
Content Destination identifier. A Content Destination is the recipient of the extracted data, once it is forwarded by the Server.
jnxDfcCDCriteria
1.3.6.1.4.1.2636.3.33.2.1.2
Counter64 (0..18446744073709551615)
Total number of filter criteria configured for the Content Destination.
jnxDfcCDByteRate
1.3.6.1.4.1.2636.3.33.2.1.3
Counter64 (0..18446744073709551615)
Average data rate (in bytes/second) summed over all active filter criteria to a configured Content Destination.
jnxDfcCDMatchedPackets
1.3.6.1.4.1.2636.3.33.2.1.4
Counter64 (0..18446744073709551615)
Total number of packets matching the filter criteria configured for the Content Destination.
jnxDfcCDMatchedBytes
1.3.6.1.4.1.2636.3.33.2.1.5
Counter64 (0..18446744073709551615)
Total number of bytes matching the filter criteria configured for the Content Destination.
jnxDfcCDCongestionNotification
1.3.6.1.4.1.2636.3.33.2.1.6
Counter64 (0..18446744073709551615)
Total number of Congestion Notifications sent to a configured notification-recipient.
Trap details
jnxDfcSoftPpsThresholdExceeded
1.3.6.1.4.1.2636.4.11.0.1
Notification of input packet rate (in packet per second) going beyond the configured limit.
jnxDfcInterfaceName
1.3.6.1.4.1.2636.3.33.3.1
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The textual name of the DFC interface.
jnxDfcInputPktRate
1.3.6.1.4.1.2636.3.33.3.2
Unsigned32
data packet rate (in packets per second).
jnxDfcPpsSoftOverloadLowWatermark
1.3.6.1.4.1.2636.3.33.3.3
Unsigned32
Configured lowest value for data packet rate (in packets per second).
jnxDfcPpsSoftOverloadHighWatermark
1.3.6.1.4.1.2636.3.33.3.4
Unsigned32
Configured highest value for data packet rate (in packets per second).
jnxDfcSoftPpsUnderThreshold
1.3.6.1.4.1.2636.4.11.0.2
Notification of input packet rate (in packet per second) dropping back to below the configured limit.
jnxDfcInterfaceName
1.3.6.1.4.1.2636.3.33.3.1
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The textual name of the DFC interface.
jnxDfcInputPktRate
1.3.6.1.4.1.2636.3.33.3.2
Unsigned32
data packet rate (in packets per second).
jnxDfcPpsSoftOverloadLowWatermark
1.3.6.1.4.1.2636.3.33.3.3
Unsigned32
Configured lowest value for data packet rate (in packets per second).
jnxDfcPpsSoftOverloadHighWatermark
1.3.6.1.4.1.2636.3.33.3.4
Unsigned32
Configured highest value for data packet rate (in packets per second).
jnxDfcHardPpsThresholdExceeded
1.3.6.1.4.1.2636.4.11.0.3
Notification of input packet rate (in packet per second) going beyond the recommended limit.
jnxDfcInterfaceName
1.3.6.1.4.1.2636.3.33.3.1
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The textual name of the DFC interface.
jnxDfcInputPktRate
1.3.6.1.4.1.2636.3.33.3.2
Unsigned32
data packet rate (in packets per second).
jnxDfcPpsHardOverloadLowWatermark
1.3.6.1.4.1.2636.3.33.3.5
Unsigned32
Recommended lowest value for data packet rate (in packets per second).
jnxDfcPpsHardOverloadHighWatermark
1.3.6.1.4.1.2636.3.33.3.6
Unsigned32
Recommended highest value for data packet rate (in packets per second).
jnxDfcHardPpsUnderThreshold
1.3.6.1.4.1.2636.4.11.0.4
Notification of input packet rate (in packet per second) dropping back to below the recommended limit.
jnxDfcInterfaceName
1.3.6.1.4.1.2636.3.33.3.1
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The textual name of the DFC interface.
jnxDfcInputPktRate
1.3.6.1.4.1.2636.3.33.3.2
Unsigned32
data packet rate (in packets per second).
jnxDfcPpsHardOverloadLowWatermark
1.3.6.1.4.1.2636.3.33.3.5
Unsigned32
Recommended lowest value for data packet rate (in packets per second).
jnxDfcPpsHardOverloadHighWatermark
1.3.6.1.4.1.2636.3.33.3.6
Unsigned32
Recommended highest value for data packet rate (in packets per second).
jnxDfcSoftMemThresholdExceeded
1.3.6.1.4.1.2636.4.11.0.5
Notification of memory overload condition i.e memory usage is going beyond the configured limit.
jnxDfcInterfaceName
1.3.6.1.4.1.2636.3.33.3.1
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The textual name of the DFC interface.
jnxDfcFlowsUsage
1.3.6.1.4.1.2636.3.33.3.7
Unsigned32 · percent
% usage of total number of flows in system.
jnxDfcCriteriaUsage
1.3.6.1.4.1.2636.3.33.3.8
Unsigned32 · percent
% usage of matching criteria for all filters.
jnxDfcMemSoftOverloadLowWatermark
1.3.6.1.4.1.2636.3.33.3.9
Unsigned32 · percent
Configured lowest watermark percent for memory load.
jnxDfcMemSoftOverloadHighWatermark
1.3.6.1.4.1.2636.3.33.3.10
Unsigned32 · percent
Configured highest watermark percent for memory load.
jnxDfcSoftMemUnderThreshold
1.3.6.1.4.1.2636.4.11.0.6
Notification of memory usage dropping back to below the configured limit.
jnxDfcInterfaceName
1.3.6.1.4.1.2636.3.33.3.1
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The textual name of the DFC interface.
jnxDfcFlowsUsage
1.3.6.1.4.1.2636.3.33.3.7
Unsigned32 · percent
% usage of total number of flows in system.
jnxDfcCriteriaUsage
1.3.6.1.4.1.2636.3.33.3.8
Unsigned32 · percent
% usage of matching criteria for all filters.
jnxDfcMemSoftOverloadLowWatermark
1.3.6.1.4.1.2636.3.33.3.9
Unsigned32 · percent
Configured lowest watermark percent for memory load.
jnxDfcMemSoftOverloadHighWatermark
1.3.6.1.4.1.2636.3.33.3.10
Unsigned32 · percent
Configured highest watermark percent for memory load.
jnxDfcHardMemThresholdExceeded
1.3.6.1.4.1.2636.4.11.0.7
Notification of memory overload condition i.e memory usage is going beyond the recommended limit.
jnxDfcInterfaceName
1.3.6.1.4.1.2636.3.33.3.1
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The textual name of the DFC interface.
jnxDfcFlowsUsage
1.3.6.1.4.1.2636.3.33.3.7
Unsigned32 · percent
% usage of total number of flows in system.
jnxDfcFlowLowWatermark
1.3.6.1.4.1.2636.3.33.3.11
Unsigned32
Recommended lowest value for number of flows allowed in the system.
jnxDfcFlowHighWatermark
1.3.6.1.4.1.2636.3.33.3.12
Unsigned32
Recommended highest value for number of flows allowed in the system.
jnxDfcCriteriaUsage
1.3.6.1.4.1.2636.3.33.3.8
Unsigned32 · percent
% usage of matching criteria for all filters.
jnxDfcCriteriaLowWatermark
1.3.6.1.4.1.2636.3.33.3.13
Unsigned32
Recommended lowest value for number of criterias allowed in the system.
jnxDfcCriteriaHighWatermark
1.3.6.1.4.1.2636.3.33.3.14
Unsigned32
Recommended highest value for number of criterias allowed in the system.
jnxDfcHardMemUnderThreshold
1.3.6.1.4.1.2636.4.11.0.8
Notification of memory usage dropping back to below the recommended limit.
jnxDfcInterfaceName
1.3.6.1.4.1.2636.3.33.3.1
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The textual name of the DFC interface.
jnxDfcFlowsUsage
1.3.6.1.4.1.2636.3.33.3.7
Unsigned32 · percent
% usage of total number of flows in system.
jnxDfcFlowLowWatermark
1.3.6.1.4.1.2636.3.33.3.11
Unsigned32
Recommended lowest value for number of flows allowed in the system.
jnxDfcFlowHighWatermark
1.3.6.1.4.1.2636.3.33.3.12
Unsigned32
Recommended highest value for number of flows allowed in the system.
jnxDfcCriteriaUsage
1.3.6.1.4.1.2636.3.33.3.8
Unsigned32 · percent
% usage of matching criteria for all filters.
jnxDfcCriteriaLowWatermark
1.3.6.1.4.1.2636.3.33.3.13
Unsigned32
Recommended lowest value for number of criterias allowed in the system.
jnxDfcCriteriaHighWatermark
1.3.6.1.4.1.2636.3.33.3.14
Unsigned32
Recommended highest value for number of criterias allowed in the system.