2014-10-09
The MIB modules representing Juniper Networks fabric Manager
Download JUNIPER-FABRIC-MIB.txt Open JUNIPER-FABRIC-MIB.txt in a new tab
1.3.6.1.4.1.2636.3.81.1.1.1.1
Index: jnxFabricSourceType · jnxFabricSourceSlot · jnxFabricSourcePfe · jnxFabricDestinationType · jnxFabricDestinationSlot · jnxFabricDestinationPfe · jnxFabricSourceStatisticsPriority
A list of fabric statistics entries based on the source of statistics.
1.3.6.1.4.1.2636.3.81.1.1.1.1.1.1
JnxFabricType1 = switch-fabric2 = linecardA value representing fabric statistics source or destination type. switch-fabric(1) Indicates switch-fabric linecard(2) Indicates linecard · Integer32
Source fabric type.
1.3.6.1.4.1.2636.3.81.1.1.1.1.1.2
Integer32 (0..1023 | 65535)
Denotes plane number for switch-fabric / slot number for linecard. If there is no per plane statistics available, then it shall be 65535.
1.3.6.1.4.1.2636.3.81.1.1.1.1.1.3
Integer32 (0..8191 | 65535)
Denotes pfe number. It is applicable only when source type is linecard and shall be 65535 for switch-fabric.
1.3.6.1.4.1.2636.3.81.1.1.1.1.1.4
JnxFabricType1 = switch-fabric2 = linecardA value representing fabric statistics source or destination type. switch-fabric(1) Indicates switch-fabric linecard(2) Indicates linecard · Integer32
Destination fabric type.
1.3.6.1.4.1.2636.3.81.1.1.1.1.1.5
Integer32 (0..1023 | 65535)
Denotes plane number for switch-fabric / slot number for linecard. If there is no per plane statistics available, then it shall be 65535.
1.3.6.1.4.1.2636.3.81.1.1.1.1.1.6
Integer32 (0..8191 | 65535)
Denotes pfe number. It is applicable only when destination type is linecard and shall be 65535 for switch-fabric.
1.3.6.1.4.1.2636.3.81.1.1.1.1.1.7
JnxFabricStatisticsPriority0 = high1 = low255 = allA value representing fabric statisitcs priority, if applicable. high(0) Indicates high priority low(1) Indicates low priority all(255) Indicates no specific priority · Integer32
Statistics priority.
1.3.6.1.4.1.2636.3.81.1.1.1.1.1.8
Counter64 (0..18446744073709551615)
Number of packets transmitted for a source.
1.3.6.1.4.1.2636.3.81.1.1.1.1.1.9
Counter64 (0..18446744073709551615)
Number of bytes transmitted for a source.
1.3.6.1.4.1.2636.3.81.1.1.1.1.1.10
CounterBasedGauge64The CounterBasedGauge64 type represents a non-negative integer, which may increase or decrease, but shall never exceed a maximum value, nor fall below a minimum value. The maximum value can not be greater than 2^64-1 (18446744073709551615 decimal), and the minimum value can not be smaller than 0. The value of a CounterBasedGauge64 has its maximum value whenever the information being modeled is greater than or equal to its maximum value, and has its minimum value whenever the information being modeled is smaller than or equal to its minimum value. If the information being modeled subsequently decreases below (increases above) the maximum (minimum) value, the CounterBasedGauge64 also decreases (increases). Note that this TC is not strictly supported in SMIv2, because the 'always increasing' and 'counter wrap' semantics associated with the Counter64 base type are not preserved. It is possible that management applications which rely solely upon the (Counter64) ASN.1 tag to determine object semantics will mistakenly operate upon objects of this type as they would for Counter64 objects. This textual convention represents a limited and short-term solution, and may be deprecated as a long term solution is defined and deployed to replace it. (0..18446744073709551615) · Counter64
Rate of transmission in packets per second for a source.
1.3.6.1.4.1.2636.3.81.1.1.1.1.1.11
CounterBasedGauge64The CounterBasedGauge64 type represents a non-negative integer, which may increase or decrease, but shall never exceed a maximum value, nor fall below a minimum value. The maximum value can not be greater than 2^64-1 (18446744073709551615 decimal), and the minimum value can not be smaller than 0. The value of a CounterBasedGauge64 has its maximum value whenever the information being modeled is greater than or equal to its maximum value, and has its minimum value whenever the information being modeled is smaller than or equal to its minimum value. If the information being modeled subsequently decreases below (increases above) the maximum (minimum) value, the CounterBasedGauge64 also decreases (increases). Note that this TC is not strictly supported in SMIv2, because the 'always increasing' and 'counter wrap' semantics associated with the Counter64 base type are not preserved. It is possible that management applications which rely solely upon the (Counter64) ASN.1 tag to determine object semantics will mistakenly operate upon objects of this type as they would for Counter64 objects. This textual convention represents a limited and short-term solution, and may be deprecated as a long term solution is defined and deployed to replace it. (0..18446744073709551615) · Counter64
Rate of transmission in bytes per second for a source.
1.3.6.1.4.1.2636.3.81.1.1.1.1.1.12
Counter64 (0..18446744073709551615)
Number of packets dropped for a source.
1.3.6.1.4.1.2636.3.81.1.1.1.1.1.13
Counter64 (0..18446744073709551615)
Number of bytes dropped for a source.
1.3.6.1.4.1.2636.3.81.1.1.1.1.1.14
CounterBasedGauge64The CounterBasedGauge64 type represents a non-negative integer, which may increase or decrease, but shall never exceed a maximum value, nor fall below a minimum value. The maximum value can not be greater than 2^64-1 (18446744073709551615 decimal), and the minimum value can not be smaller than 0. The value of a CounterBasedGauge64 has its maximum value whenever the information being modeled is greater than or equal to its maximum value, and has its minimum value whenever the information being modeled is smaller than or equal to its minimum value. If the information being modeled subsequently decreases below (increases above) the maximum (minimum) value, the CounterBasedGauge64 also decreases (increases). Note that this TC is not strictly supported in SMIv2, because the 'always increasing' and 'counter wrap' semantics associated with the Counter64 base type are not preserved. It is possible that management applications which rely solely upon the (Counter64) ASN.1 tag to determine object semantics will mistakenly operate upon objects of this type as they would for Counter64 objects. This textual convention represents a limited and short-term solution, and may be deprecated as a long term solution is defined and deployed to replace it. (0..18446744073709551615) · Counter64
Drop rate in packets per second for a source.
1.3.6.1.4.1.2636.3.81.1.1.1.1.1.15
CounterBasedGauge64The CounterBasedGauge64 type represents a non-negative integer, which may increase or decrease, but shall never exceed a maximum value, nor fall below a minimum value. The maximum value can not be greater than 2^64-1 (18446744073709551615 decimal), and the minimum value can not be smaller than 0. The value of a CounterBasedGauge64 has its maximum value whenever the information being modeled is greater than or equal to its maximum value, and has its minimum value whenever the information being modeled is smaller than or equal to its minimum value. If the information being modeled subsequently decreases below (increases above) the maximum (minimum) value, the CounterBasedGauge64 also decreases (increases). Note that this TC is not strictly supported in SMIv2, because the 'always increasing' and 'counter wrap' semantics associated with the Counter64 base type are not preserved. It is possible that management applications which rely solely upon the (Counter64) ASN.1 tag to determine object semantics will mistakenly operate upon objects of this type as they would for Counter64 objects. This textual convention represents a limited and short-term solution, and may be deprecated as a long term solution is defined and deployed to replace it. (0..18446744073709551615) · Counter64
Drop rate in bytes per second for a source.
1.3.6.1.4.1.2636.3.81.1.1.1.1.1.16
CounterBasedGauge64The CounterBasedGauge64 type represents a non-negative integer, which may increase or decrease, but shall never exceed a maximum value, nor fall below a minimum value. The maximum value can not be greater than 2^64-1 (18446744073709551615 decimal), and the minimum value can not be smaller than 0. The value of a CounterBasedGauge64 has its maximum value whenever the information being modeled is greater than or equal to its maximum value, and has its minimum value whenever the information being modeled is smaller than or equal to its minimum value. If the information being modeled subsequently decreases below (increases above) the maximum (minimum) value, the CounterBasedGauge64 also decreases (increases). Note that this TC is not strictly supported in SMIv2, because the 'always increasing' and 'counter wrap' semantics associated with the Counter64 base type are not preserved. It is possible that management applications which rely solely upon the (Counter64) ASN.1 tag to determine object semantics will mistakenly operate upon objects of this type as they would for Counter64 objects. This textual convention represents a limited and short-term solution, and may be deprecated as a long term solution is defined and deployed to replace it. (0..18446744073709551615) · Counter64
Average queue depth, if applicable for a source type. Else it shall be 0.
1.3.6.1.4.1.2636.3.81.1.1.1.1.1.17
CounterBasedGauge64The CounterBasedGauge64 type represents a non-negative integer, which may increase or decrease, but shall never exceed a maximum value, nor fall below a minimum value. The maximum value can not be greater than 2^64-1 (18446744073709551615 decimal), and the minimum value can not be smaller than 0. The value of a CounterBasedGauge64 has its maximum value whenever the information being modeled is greater than or equal to its maximum value, and has its minimum value whenever the information being modeled is smaller than or equal to its minimum value. If the information being modeled subsequently decreases below (increases above) the maximum (minimum) value, the CounterBasedGauge64 also decreases (increases). Note that this TC is not strictly supported in SMIv2, because the 'always increasing' and 'counter wrap' semantics associated with the Counter64 base type are not preserved. It is possible that management applications which rely solely upon the (Counter64) ASN.1 tag to determine object semantics will mistakenly operate upon objects of this type as they would for Counter64 objects. This textual convention represents a limited and short-term solution, and may be deprecated as a long term solution is defined and deployed to replace it. (0..18446744073709551615) · Counter64
Current queue depth, if applicable for a source type. Else it shall be 0.
1.3.6.1.4.1.2636.3.81.1.1.1.1.1.18
CounterBasedGauge64The CounterBasedGauge64 type represents a non-negative integer, which may increase or decrease, but shall never exceed a maximum value, nor fall below a minimum value. The maximum value can not be greater than 2^64-1 (18446744073709551615 decimal), and the minimum value can not be smaller than 0. The value of a CounterBasedGauge64 has its maximum value whenever the information being modeled is greater than or equal to its maximum value, and has its minimum value whenever the information being modeled is smaller than or equal to its minimum value. If the information being modeled subsequently decreases below (increases above) the maximum (minimum) value, the CounterBasedGauge64 also decreases (increases). Note that this TC is not strictly supported in SMIv2, because the 'always increasing' and 'counter wrap' semantics associated with the Counter64 base type are not preserved. It is possible that management applications which rely solely upon the (Counter64) ASN.1 tag to determine object semantics will mistakenly operate upon objects of this type as they would for Counter64 objects. This textual convention represents a limited and short-term solution, and may be deprecated as a long term solution is defined and deployed to replace it. (0..18446744073709551615) · Counter64
Peak queue depth, if applicable for a source type. Else it shall be 0.
1.3.6.1.4.1.2636.3.81.1.1.1.1.1.19
CounterBasedGauge64The CounterBasedGauge64 type represents a non-negative integer, which may increase or decrease, but shall never exceed a maximum value, nor fall below a minimum value. The maximum value can not be greater than 2^64-1 (18446744073709551615 decimal), and the minimum value can not be smaller than 0. The value of a CounterBasedGauge64 has its maximum value whenever the information being modeled is greater than or equal to its maximum value, and has its minimum value whenever the information being modeled is smaller than or equal to its minimum value. If the information being modeled subsequently decreases below (increases above) the maximum (minimum) value, the CounterBasedGauge64 also decreases (increases). Note that this TC is not strictly supported in SMIv2, because the 'always increasing' and 'counter wrap' semantics associated with the Counter64 base type are not preserved. It is possible that management applications which rely solely upon the (Counter64) ASN.1 tag to determine object semantics will mistakenly operate upon objects of this type as they would for Counter64 objects. This textual convention represents a limited and short-term solution, and may be deprecated as a long term solution is defined and deployed to replace it. (0..18446744073709551615) · Counter64
Maximum queue depth, if applicable for a source type. Else it shall be 0.
1.3.6.1.4.1.2636.3.81.1.1.1.1.1.20
Counter64 (0..18446744073709551615)
Number of errror packets for a source.
1.3.6.1.4.1.2636.3.81.1.1.1.1.1.21
CounterBasedGauge64The CounterBasedGauge64 type represents a non-negative integer, which may increase or decrease, but shall never exceed a maximum value, nor fall below a minimum value. The maximum value can not be greater than 2^64-1 (18446744073709551615 decimal), and the minimum value can not be smaller than 0. The value of a CounterBasedGauge64 has its maximum value whenever the information being modeled is greater than or equal to its maximum value, and has its minimum value whenever the information being modeled is smaller than or equal to its minimum value. If the information being modeled subsequently decreases below (increases above) the maximum (minimum) value, the CounterBasedGauge64 also decreases (increases). Note that this TC is not strictly supported in SMIv2, because the 'always increasing' and 'counter wrap' semantics associated with the Counter64 base type are not preserved. It is possible that management applications which rely solely upon the (Counter64) ASN.1 tag to determine object semantics will mistakenly operate upon objects of this type as they would for Counter64 objects. This textual convention represents a limited and short-term solution, and may be deprecated as a long term solution is defined and deployed to replace it. (0..18446744073709551615) · Counter64
Error rate in packets per second for a source.