EZ5 MIB Catalog

JUNIPER-IF-ACCOUNTING-MIB

2013-12-25

MIB module to define Forwarding Class based Interface statistics. The statistics will provide protocol specific statistics value which includes L2 overhead bytes. The mib is currently supported only on MX platforms.

Download JUNIPER-IF-ACCOUNTING-MIB.txt Open JUNIPER-IF-ACCOUNTING-MIB.txt in a new tab

TABLES (2)

Tables (2)

NameOID
jnxIfFcAccountStatTable1.3.6.1.4.1.2636.3.3.10.1
jnxIfFcInlineAccountingStatTable1.3.6.1.4.1.2636.3.3.10.2

END OF TOC

Table details

jnxIfFcAccountStatTable

1.3.6.1.4.1.2636.3.3.10.1

Index: jnxIfFcIfIndex · jnxIfFcFcIndex · jnxIfFcProtocol

This table presents the per forwarding-class and per protocol type statistics.

jnxIfFcIfIndex

1.3.6.1.4.1.2636.3.3.10.1.1.1

InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d

The ifIndex of the interface.

jnxIfFcFcIndex

1.3.6.1.4.1.2636.3.3.10.1.1.2

JnxCosFcIdentifierA number identifying the forwarding class. (0..15) · Integer32

The Forwarding Class Index of the interface.

jnxIfFcProtocol

1.3.6.1.4.1.2636.3.3.10.1.1.3

INTEGER1 = all2 = ipv43 = ipv64 = mpls5 = layer26 = other · Integer32

The protocol type of the entry's traffic.

jnxIfFcHCInUcastPkts

1.3.6.1.4.1.2636.3.3.10.1.1.4

Counter64 (0..18446744073709551615)

The total number of unicast packets ingressed.

jnxIfFcHCInUcastOctets

1.3.6.1.4.1.2636.3.3.10.1.1.5

Counter64 (0..18446744073709551615)

The total number of unicast bytes ingressed.

jnxIfFcHCOutUcastPkts

1.3.6.1.4.1.2636.3.3.10.1.1.6

Counter64 (0..18446744073709551615)

The total number of unicast packets egressed.

jnxIfFcHCOutUcastOctets

1.3.6.1.4.1.2636.3.3.10.1.1.7

Counter64 (0..18446744073709551615)

The total number of unicast bytes egressed.

jnxIfFcHCInMcastPkts

1.3.6.1.4.1.2636.3.3.10.1.1.8

Counter64 (0..18446744073709551615)

The total number of multicast packets ingressed.

jnxIfFcHCInMcastOctets

1.3.6.1.4.1.2636.3.3.10.1.1.9

Counter64 (0..18446744073709551615)

The total number of multicast bytes ingressed.

jnxIfFcHCOutMcastPkts

1.3.6.1.4.1.2636.3.3.10.1.1.10

Counter64 (0..18446744073709551615)

The total number of multicast packets egressed.

jnxIfFcHCOutMcastOctets

1.3.6.1.4.1.2636.3.3.10.1.1.11

Counter64 (0..18446744073709551615)

The total number of multicast bytes egressed.

jnxIfFcInlineAccountingStatTable

1.3.6.1.4.1.2636.3.3.10.2

Index: jnxIfFcIfIndex · jnxIfFcFcIndex · jnxIfFcProtocol

This table presents the per forwarding-class and per family statistics without considering the traffic types.

jnxIfFcInlineHCInPkts

1.3.6.1.4.1.2636.3.3.10.2.1.1

Counter64 (0..18446744073709551615)

The total number of packets ingressed.

jnxIfFcInlineHCInPktsSecRate

1.3.6.1.4.1.2636.3.3.10.2.1.2

CounterBasedGauge64The CounterBasedGauge64 type represents a non-negative integer, which may increase or decrease, but shall never exceed a maximum value, nor fall below a minimum value. The maximum value can not be greater than 2^64-1 (18446744073709551615 decimal), and the minimum value can not be smaller than 0. The value of a CounterBasedGauge64 has its maximum value whenever the information being modeled is greater than or equal to its maximum value, and has its minimum value whenever the information being modeled is smaller than or equal to its minimum value. If the information being modeled subsequently decreases below (increases above) the maximum (minimum) value, the CounterBasedGauge64 also decreases (increases). Note that this TC is not strictly supported in SMIv2, because the 'always increasing' and 'counter wrap' semantics associated with the Counter64 base type are not preserved. It is possible that management applications which rely solely upon the (Counter64) ASN.1 tag to determine object semantics will mistakenly operate upon objects of this type as they would for Counter64 objects. This textual convention represents a limited and short-term solution, and may be deprecated as a long term solution is defined and deployed to replace it. (0..18446744073709551615) · Counter64

The packets rate ingressed per second.

jnxIfFcInlineHCInOctets

1.3.6.1.4.1.2636.3.3.10.2.1.3

Counter64 (0..18446744073709551615)

The total number of bytes ingressed.

jnxIfFcInlineHCInOctetsSecRate

1.3.6.1.4.1.2636.3.3.10.2.1.4

CounterBasedGauge64The CounterBasedGauge64 type represents a non-negative integer, which may increase or decrease, but shall never exceed a maximum value, nor fall below a minimum value. The maximum value can not be greater than 2^64-1 (18446744073709551615 decimal), and the minimum value can not be smaller than 0. The value of a CounterBasedGauge64 has its maximum value whenever the information being modeled is greater than or equal to its maximum value, and has its minimum value whenever the information being modeled is smaller than or equal to its minimum value. If the information being modeled subsequently decreases below (increases above) the maximum (minimum) value, the CounterBasedGauge64 also decreases (increases). Note that this TC is not strictly supported in SMIv2, because the 'always increasing' and 'counter wrap' semantics associated with the Counter64 base type are not preserved. It is possible that management applications which rely solely upon the (Counter64) ASN.1 tag to determine object semantics will mistakenly operate upon objects of this type as they would for Counter64 objects. This textual convention represents a limited and short-term solution, and may be deprecated as a long term solution is defined and deployed to replace it. (0..18446744073709551615) · Counter64

The bytes rate ingressed per second.

jnxIfFcInlineHCOutPkts

1.3.6.1.4.1.2636.3.3.10.2.1.5

Counter64 (0..18446744073709551615)

The total number of packets egressed.

jnxIfFcInlineHCOutPktsSecRate

1.3.6.1.4.1.2636.3.3.10.2.1.6

CounterBasedGauge64The CounterBasedGauge64 type represents a non-negative integer, which may increase or decrease, but shall never exceed a maximum value, nor fall below a minimum value. The maximum value can not be greater than 2^64-1 (18446744073709551615 decimal), and the minimum value can not be smaller than 0. The value of a CounterBasedGauge64 has its maximum value whenever the information being modeled is greater than or equal to its maximum value, and has its minimum value whenever the information being modeled is smaller than or equal to its minimum value. If the information being modeled subsequently decreases below (increases above) the maximum (minimum) value, the CounterBasedGauge64 also decreases (increases). Note that this TC is not strictly supported in SMIv2, because the 'always increasing' and 'counter wrap' semantics associated with the Counter64 base type are not preserved. It is possible that management applications which rely solely upon the (Counter64) ASN.1 tag to determine object semantics will mistakenly operate upon objects of this type as they would for Counter64 objects. This textual convention represents a limited and short-term solution, and may be deprecated as a long term solution is defined and deployed to replace it. (0..18446744073709551615) · Counter64

The packets rate egressed per second.

jnxIfFcInlineHCOutOctets

1.3.6.1.4.1.2636.3.3.10.2.1.7

Counter64 (0..18446744073709551615)

The total number of bytes egressed.

jnxIfFcInlineHCOutOctetsSecRate

1.3.6.1.4.1.2636.3.3.10.2.1.8

CounterBasedGauge64The CounterBasedGauge64 type represents a non-negative integer, which may increase or decrease, but shall never exceed a maximum value, nor fall below a minimum value. The maximum value can not be greater than 2^64-1 (18446744073709551615 decimal), and the minimum value can not be smaller than 0. The value of a CounterBasedGauge64 has its maximum value whenever the information being modeled is greater than or equal to its maximum value, and has its minimum value whenever the information being modeled is smaller than or equal to its minimum value. If the information being modeled subsequently decreases below (increases above) the maximum (minimum) value, the CounterBasedGauge64 also decreases (increases). Note that this TC is not strictly supported in SMIv2, because the 'always increasing' and 'counter wrap' semantics associated with the Counter64 base type are not preserved. It is possible that management applications which rely solely upon the (Counter64) ASN.1 tag to determine object semantics will mistakenly operate upon objects of this type as they would for Counter64 objects. This textual convention represents a limited and short-term solution, and may be deprecated as a long term solution is defined and deployed to replace it. (0..18446744073709551615) · Counter64

The bytes rate egressed per second.

↑ To TOC