jnxOpticsNotificationTrigDefaultHoldtimeUp
1.3.6.1.4.1.2636.3.71.1.1.3
Integer32
This object will indicate the time (ms) for the defect to persist before it is declared an alarm.
JUNIPER-IFOPTICS-MIB
2024-06-24
This MIB module defines objects used for managing the Optics interface for Juniper products.
Download JUNIPER-IFOPTICS-MIB.txt Open JUNIPER-IFOPTICS-MIB.txt in a new tab
SCALARS (3) · TABLES (21) · TRAPS (8)
Scalars (3)
| Name | OID |
|---|---|
| jnxOpticsNotificationTrigDefaultHoldtimeUp | 1.3.6.1.4.1.2636.3.71.1.1.3 |
| jnxOpticsNotificationTrigDefaultHoldtimeDown | 1.3.6.1.4.1.2636.3.71.1.1.4 |
| jnxOpticsClearAllPMs | 1.3.6.1.4.1.2636.3.71.1.1.6 |
Tables (21)
Traps (8)
END OF TOC
Scalar details
jnxOpticsNotificationTrigDefaultHoldtimeDown
1.3.6.1.4.1.2636.3.71.1.1.4
Integer32
This object will indicate the time (ms) for the defect to absent before the alarm is cleared.
jnxOpticsClearAllPMs
1.3.6.1.4.1.2636.3.71.1.1.6
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
To clear all optics Performance monitoring counters on all interfaces.
Table details
jnxOpticsConfigTable
1.3.6.1.4.1.2636.3.71.1.1.1
Index: jnxOpticsConfigContainerIndex · jnxOpticsConfigL1Index · jnxOpticsConfigL2Index · jnxOpticsConfigL3Index
Information about the optics config Table.
jnxOpticsConfigContainerIndex
1.3.6.1.4.1.2636.3.71.1.1.1.1.1
Integer32 (1..1024)
The associated jnxContentsContainerIndex - eg shelf..
jnxOpticsConfigL1Index
1.3.6.1.4.1.2636.3.71.1.1.1.1.2
Integer32 (1..1024)
The level one index associated with this subject ... eg fpc slot.
jnxOpticsConfigL2Index
1.3.6.1.4.1.2636.3.71.1.1.1.1.3
Integer32 (1..1024)
The level two index associated with this subject .. eg pic slot.
jnxOpticsConfigL3Index
1.3.6.1.4.1.2636.3.71.1.1.1.1.4
Integer32 (1..1024)
The level three index associated with this subject.. eg port.
jnxOpticsType
1.3.6.1.4.1.2636.3.71.1.1.1.1.5
Integer32
0 - none 1 - SFP 2 - XFP 3 - SFP+ 4 - XFP+ 5 - CFP 6 - CFP+ 7 - Non pluggable 8 - QSFP DWDM 9 - QSFP56DD
jnxLaserEnable
1.3.6.1.4.1.2636.3.71.1.1.1.1.6
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
0 - laser off 1 - laser on
jnxWavelength
1.3.6.1.4.1.2636.3.71.1.1.1.1.7
Unsigned32 · 0.01 nm
The transmit wavelength of the laser.
jnxSpacing
1.3.6.1.4.1.2636.3.71.1.1.1.1.8
JnxOpticsChannelSpacing1 = spacing100Ghz2 = spacing50Ghz3 = spacing25Ghz4 = spacing12point5Ghz5 = spacing6point5GhzChannel spacing 1 - 100 Ghz 2 - 50 GHz 3 - 25 GHz 4 - 12.5 GHz 5 - 6.25 Ghz · Integer32
A minimum nominal difference in frequency (GHz) between two adjacent channels.
jnxModulation
1.3.6.1.4.1.2636.3.71.1.1.1.1.9
Unsigned32
Modulation Unknown - (1), NonPSK - (2), ODB - (3), DPSK - (4), QPSK - (5), DQPSK - (6), DPQPSK - (7), 16QAM - (8), 64QAM - (9), 256QAM - (10)
jnxTxOpticalPower
1.3.6.1.4.1.2636.3.71.1.1.1.1.10
Integer32 · 0.01 dbm
Transmit optical power.
jnxRxOpticalPower
1.3.6.1.4.1.2636.3.71.1.1.1.1.11
Integer32 · 0.01 dbm
Receive optical power.
jnxModuleTempHighThresh
1.3.6.1.4.1.2636.3.71.1.1.1.1.12
Integer32 · Celsius (0.01 degrees C)
High module temerature in degree fahrenheit for a 15 minute period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
jnxModuleTempLowThresh
1.3.6.1.4.1.2636.3.71.1.1.1.1.13
Integer32 · Celsius (0.01 degrees C)
Low module temerature in degree fahrenheit for a 15 minute period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
jnxTxPowerHighThresh
1.3.6.1.4.1.2636.3.71.1.1.1.1.14
Integer32 · 0.01 dbm
Tx power for a 15 minute period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
jnxTxPowerLowThresh
1.3.6.1.4.1.2636.3.71.1.1.1.1.15
Integer32 · 0.01 dbm
Tx Power for a 15 minute period below which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
jnxRxPowerHighThresh
1.3.6.1.4.1.2636.3.71.1.1.1.1.16
Integer32 · 0.01 dbm
Rx power for a 15 minute period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
jnxRxPowerLowThresh
1.3.6.1.4.1.2636.3.71.1.1.1.1.17
Integer32 · 0.01 dbm
Rx Power for a 15 minute period below which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
jnx24HourModuleTempHighThresh
1.3.6.1.4.1.2636.3.71.1.1.1.1.18
Integer32 · Celsius (0.01 degrees C)
High module temerature in degree fahrenheit for a 24 hour period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
jnx24HourModuleTempLowThresh
1.3.6.1.4.1.2636.3.71.1.1.1.1.19
Integer32 · Celsius (0.01 degrees C)
Low module temerature in degree fahrenheit for a 24 hour period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
jnx24HourTxPowerHighThresh
1.3.6.1.4.1.2636.3.71.1.1.1.1.20
Integer32 · 0.01 dbm
Tx power for a 24 hour period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
jnx24HourTxPowerLowThresh
1.3.6.1.4.1.2636.3.71.1.1.1.1.21
Integer32 · 0.01 dbm
Tx for a 24 hour period Power below which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
jnx24HourRxPowerHighThresh
1.3.6.1.4.1.2636.3.71.1.1.1.1.22
Integer32 · 0.01 dbm
Rx power for a 24 hour period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
jnx24HourRxPowerLowThresh
1.3.6.1.4.1.2636.3.71.1.1.1.1.23
Integer32 · 0.01 dbm
Rx Power for a 24 hour period below which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
jnxRxLosPowerWarningThresh
1.3.6.1.4.1.2636.3.71.1.1.1.1.24
Integer32 · 0.01 dbm
Rx Power warning threshold for seeting the optical LOS warning.
jnxRxLosPowerAlarmThresh
1.3.6.1.4.1.2636.3.71.1.1.1.1.25
Integer32 · 0.01 dbm
Rx Power alarm threshold for seeting the optical LOS warning.
jnxOpticsCurrentStatus
1.3.6.1.4.1.2636.3.71.1.1.1.1.26
BITS
jnxTxPowerHighEnableTCA
1.3.6.1.4.1.2636.3.71.1.1.1.1.27
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
Enable/Disable for the Tx Power High TCA.
jnxTxPowerLowEnableTCA
1.3.6.1.4.1.2636.3.71.1.1.1.1.28
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
Enable/Disable for the Tx Power Low TCA.
jnxRxPowerHighEnableTCA
1.3.6.1.4.1.2636.3.71.1.1.1.1.29
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
Enable/Disable for the Rx Power High TCA.
jnxRxPowerLowEnableTCA
1.3.6.1.4.1.2636.3.71.1.1.1.1.30
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
Enable/Disable for the Rx Power Low TCA.
jnxModuleTempHighEnableTCA
1.3.6.1.4.1.2636.3.71.1.1.1.1.31
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
Enable/Disable for the Module Temp High TCA.
jnxModuleTempLowEnableTCA
1.3.6.1.4.1.2636.3.71.1.1.1.1.32
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
Enable/Disable for the Module Temp Low TCA.
jnxCarFreqOffsetHighEnableTCA
1.3.6.1.4.1.2636.3.71.1.1.1.1.33
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
Enable/Disable for the Carrier Frequency Offset High TCA.
jnxCarFreqOffsetLowEnableTCA
1.3.6.1.4.1.2636.3.71.1.1.1.1.34
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
Enable/Disable for the CarrierFreqOffetLow TCA's.
jnxCarFreqOffsetHighThresh
1.3.6.1.4.1.2636.3.71.1.1.1.1.35
Integer32 · MHz
Carrier frequency offset for a 15 minute period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
jnx24HourCarFreqOffsetHighThresh
1.3.6.1.4.1.2636.3.71.1.1.1.1.36
Integer32 · MHz
Carrier frequency offset for a 24 Hour period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
jnxCarFreqOffsetLowThresh
1.3.6.1.4.1.2636.3.71.1.1.1.1.37
Integer32 · MHz
Carrier frequency offset for a 15 minute period Low which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
jnx24HourCarFreqOffsetLowThresh
1.3.6.1.4.1.2636.3.71.1.1.1.1.38
Integer32 · MHz
Carrier frequency offset for a 24 Hour period Low which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
jnxOpticsTraceToneCfgTable
1.3.6.1.4.1.2636.3.71.1.1.2
Index: jnxOpticsTraceToneCfgContainerIndex · jnxOpticsTraceToneCfgL1Index · jnxOpticsTraceToneCfgL2Index · jnxOpticsTraceToneCfgL3Index
Information about the optics tests.
jnxOpticsTraceToneCfgContainerIndex
1.3.6.1.4.1.2636.3.71.1.1.2.1.1
Integer32 (1..1024)
The associated jnxContentsContainerIndex - eg shelf..
jnxOpticsTraceToneCfgL1Index
1.3.6.1.4.1.2636.3.71.1.1.2.1.2
Integer32 (1..1024)
The level one index associated with this subject ... eg fpc slot.
jnxOpticsTraceToneCfgL2Index
1.3.6.1.4.1.2636.3.71.1.1.2.1.3
Integer32 (1..1024)
The level two index associated with this subject .. eg pic slot.
jnxOpticsTraceToneCfgL3Index
1.3.6.1.4.1.2636.3.71.1.1.2.1.4
Integer32 (1..1024)
The level three index associated with this subject.. eg port.
jnxOpticsTraceToneCfgTxEnable
1.3.6.1.4.1.2636.3.71.1.1.2.1.5
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
This will enable/disable the transmit Trace tone feature.
jnxOpticsTraceToneCfgRxEnable
1.3.6.1.4.1.2636.3.71.1.1.2.1.6
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
This will enable/disable the receive Trace tone feature.
jnxOpticsTraceToneCfgDestId
1.3.6.1.4.1.2636.3.71.1.1.2.1.7
OCTET STRING
This is the destination Id of the link ID/ the chassis and the blade. The transmit messages will also have the src id which is this chassis id and this port info.
jnxOpticsTraceToneCfgTxMsg
1.3.6.1.4.1.2636.3.71.1.1.2.1.8
OCTET STRING
This will be the transmit data in the tracetone message.
jnxOpticsTraceToneCfgRxMsg
1.3.6.1.4.1.2636.3.71.1.1.2.1.9
OCTET STRING
This will be the receive data in the trace tone message.
jnxOpticsNotificationTrigTable
1.3.6.1.4.1.2636.3.71.1.1.5
Index: jnxOpticsNotificationTrigContainerIndex · jnxOpticsNotificationTrigL1Index · jnxOpticsNotificationTrigL2Index · jnxOpticsNotificationTrigL3Index · jnxOpticsNotificationTrigAlmId
Information about the otn Alarm/Alart/Info trigger table.
jnxOpticsNotificationTrigContainerIndex
1.3.6.1.4.1.2636.3.71.1.1.5.1.1
Integer32 (1..1024)
The associated jnxContentsContainerIndex - eg shelf.
jnxOpticsNotificationTrigL1Index
1.3.6.1.4.1.2636.3.71.1.1.5.1.2
Integer32 (1..1024)
The level one index associated with this subject ... eg fpc slot.
jnxOpticsNotificationTrigL2Index
1.3.6.1.4.1.2636.3.71.1.1.5.1.3
Integer32 (1..1024)
The level two index associated with this subject .. eg pic slot.
jnxOpticsNotificationTrigL3Index
1.3.6.1.4.1.2636.3.71.1.1.5.1.4
Integer32 (1..1024)
The level three index associated with this subject.. eg port.
jnxOpticsNotificationTrigAlmId
1.3.6.1.4.1.2636.3.71.1.1.5.1.5
JnxOpticsNotificationId1 = jnxOpticsLOS2 = jnxOpticsWavelenthLockErr3 = jnxOpticsPowerHighAlarm4 = jnxOpticsPowerLowAlarm5 = jnxOpticsBiasCurrentHighAlarm6 = jnxOpticsBiasCurrentLowAlarm7 = jnxOpticsTemperatureHighAlarm8 = jnxOpticsTemperaturelowAlarm9 = jnxOpticsTxPLLLockAlarm10 = jnxOpticsRxPLLLockAlarm11 = jnxOpticsAvgPowerAlarm12 = jnxOpticsRxLossAvgPowerAlarm13 = jnxOpticsLossofACPowerAlarm14 = jnxOpticsTxPowerHighThreshAlert15 = jnxOpticsTxPowerLowThreshAlert16 = jnxOpticsRxPowerHighThreshAlert17 = jnxOpticsRxPowerLowThreshAlert18 = jnxOpticsModuleTempHighThreshAlert19 = jnxOpticsModuleTempLowThreshAlert20 = jnxOptics24HourTxPowerHighThreshAlert21 = jnxOptics24HourTxPowerLowThreshAlert22 = jnxOptics24HourRxPowerHighThreshAlert23 = jnxOptics24HourRxPowerLowThreshAlert24 = jnxOptics24HourModuleTempHighThreshAlert25 = jnxOptics24HourModuleTempLowThreshAlert26 = jnxOpticsRxPowerHighAlarm27 = jnxOpticsRxPowerLowAlarm28 = jnxOpticsTxPowerHighWarning29 = jnxOpticsTxPowerLowWarning30 = jnxOpticsRxPowerHighWarning31 = jnxOpticsRxPowerLowWarning32 = jnxOpticsModuleTempHighWarning33 = jnxOpticsModuleTempLowWarning34 = jnxOpticsRxCarrierFreqHigh35 = jnxOpticsRxCarrierFreqLow36 = jnxOpticsChromaticDispHighWarning37 = jnxOpticsChromaticDispLowWarning38 = jnxOpticsQLowWarning39 = jnxOpticsOSNRLowWarning40 = jnxOpticsCarrierFreqHighAlert41 = jnxOpticsCarrierFreqLowAlert42 = jnxOptics24HourCarrierFreqHighAlert43 = jnxOptics24HourCarrierFreqLowAlert44 = jnxOpticsLossOfLock45 = jnxOpticsLossOfSignal46 = jnxOpticsLossOfFrame47 = jnxOpticsLossOfMultiFrame48 = jnxOpticsOTUBDI49 = jnxOpticsRxModemSYncFault50 = jnxOpticsRxModemLOL51 = jnxOpticsRxLOA52 = jnxOpticsModBiasControlLoopFail53 = jnxOpticsILTAfault54 = jnxOpticsDACcalibrationfault55 = jnxOpticsADCcalibrationfault56 = jnxOpticsTecCurrentHighAlert57 = jnxOpticsTecCurrentLowAlert58 = jnxOpticsPamHistogramHighAlert59 = jnxOpticsResidualIsiHighAlert60 = jnxOpticsResidualIsiLowAlert61 = jnxOpticsFecCorrectedErrorsHighAlert62 = jnxOpticsFecUCorrectedWordsHighAlert63 = jnxOptics24HourTecCurrentHighAlert64 = jnxOptics24HourTecCurrentLowAlert65 = jnxOptics24HourPamHistogramHighAlert66 = jnxOptics24HourResidualIsiHighAlert67 = jnxOptics24HourResidualIsiLowAlert68 = jnxOptics24HourFecCorrectedErrorsHighAlert69 = jnxOptics24HourFecUCorrectedWordsHighAlert70 = jnxOpticsLaserFreqErrorHighAlert71 = jnxOpticsLaserFreqErrorLowAlert72 = jnxOptics24HourLaserFreqErrorHighAlert73 = jnxOptics24HourLaserFreqErrorLowAlert74 = jnxOpticsSnrLowAlert75 = jnxOptics24HourSnrLowAlert76 = jnxOpticsPreFecBERHighAlert77 = jnxOptics24HourPreFecBERHignAlert78 = jnxOpticsRxSignalPowerHighThreshAlert79 = jnxOpticsRxSignalPowerLowThreshAlert80 = jnxOptics24HourRxSignalPowerHighThreshAlert81 = jnxOptics24HourRxSignalPowerLowThreshAlertOptic alarm types · Integer32
This will be the type of Alarm as defined by JnxOpticsNotificationId
jnxOpticsNotificationTrigSeverity
1.3.6.1.4.1.2636.3.71.1.1.5.1.6
JnxOpticsSeverity1 = jnxCritical2 = jnxMajor3 = jnxMinor4 = jnxInfoSeverity of the Notification · Integer32
This will be the Severity of the Notification.
jnxOpticsNotificationTrigIgnore
1.3.6.1.4.1.2636.3.71.1.1.5.1.7
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
This object will ignore the alarm when set.
jnxOpticsNotificationTrigHoldtimeUp
1.3.6.1.4.1.2636.3.71.1.1.5.1.8
Integer32
This object will indicate the time (ms) for the defect to persist before it is declared an alarm.
jnxOpticsNotificationTrigHoldtimeDown
1.3.6.1.4.1.2636.3.71.1.1.5.1.9
Integer32
This object will indicate the time (ms) the defect is absent before the alarm is cleared.
jnxOpticsTrigServiceStateAction
1.3.6.1.4.1.2636.3.71.1.1.5.1.10
JnxOpticsServiceStateAction0 = jnxNotSupported1 = jnxNonServiceAffecting2 = jnxServiceAffectingNotification's action on the service state · Integer32
This will indicate whether this alarm is service affecting or not .
jnxOpticsClearIfPMsTable
1.3.6.1.4.1.2636.3.71.1.1.7
Index: ifIndex
To clear optics Performance monitoring counters on this interfaces
from IF-MIB
ifIndex
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
jnxOpticsClearCurrent
1.3.6.1.4.1.2636.3.71.1.1.7.1.1
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
1- to clear all the Current Optics PM's for this interface
jnxOpticsClearInterfaceInterval
1.3.6.1.4.1.2636.3.71.1.1.7.1.2
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
1- to clear all the Optics PM's intervals(1-96) for this interface
jnxOpticsClearInterfaceDay
1.3.6.1.4.1.2636.3.71.1.1.7.1.3
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
1 - to clear all the Current Day and Previous Day Optics PM's for this interface
jnxOpticsClearInterfaceAll
1.3.6.1.4.1.2636.3.71.1.1.7.1.4
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
1 - to clear all the Optics PM's for this interface
jnxOpticsOTIfConfigTable
1.3.6.1.4.1.2636.3.71.1.1.8
Index: jnxOpticsOTIfConfigContainerIndex · jnxOpticsOTIfConfigL1Index · jnxOpticsOTIfConfigL2Index · jnxOpticsOTIfConfigL3Index
Information about the OT interface optics config Table.
jnxOpticsOTIfConfigContainerIndex
1.3.6.1.4.1.2636.3.71.1.1.8.1.1
Integer32 (1..1024)
The associated jnxContentsContainerIndex - eg shelf..
jnxOpticsOTIfConfigL1Index
1.3.6.1.4.1.2636.3.71.1.1.8.1.2
Integer32 (1..1024)
The level one index associated with this subject ... eg fpc slot.
jnxOpticsOTIfConfigL2Index
1.3.6.1.4.1.2636.3.71.1.1.8.1.3
Integer32 (1..1024)
The level two index associated with this subject .. eg pic slot.
jnxOpticsOTIfConfigL3Index
1.3.6.1.4.1.2636.3.71.1.1.8.1.4
Integer32 (1..1024)
The level three index associated with this subject.. eg port.
jnxOpticsOTIfLaserEnable
1.3.6.1.4.1.2636.3.71.1.1.8.1.5
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
0 - laser off 1 - laser on
jnxOpticsOTIfFecMode
1.3.6.1.4.1.2636.3.71.1.1.8.1.6
JnxOpticsOTIfFecType0 = none1 = sdfec2 = sdfec253 = hgfec4 = sdfec15fec modes of an interface OT interface · Integer32
This parameter indicates what FEC type in the OTU frame
jnxOpticsOTIfEncodingOption
1.3.6.1.4.1.2636.3.71.1.1.8.1.7
JnxOpticsOTIfEncodingOptions0 = unknown1 = differential2 = non-differentialEncoding Options supported on OT interface · Integer32
Encoding option selected
jnxOpticsOTIfModulation
1.3.6.1.4.1.2636.3.71.1.1.8.1.8
Integer32 (1..1024)
Modulation formats supported on the platform Unknown - (0), 16QAM - (1), 8QAM - (2), QPSK - (3)
jnxOpticsOTIfAdminState
1.3.6.1.4.1.2636.3.71.1.1.8.1.9
JnxOpticsOTIfAdminStates1 = jnxAdminStateInService2 = jnxAdminStateInServiceMA3 = jnxAdminStateOutofService4 = jnxAdminStateOutofServiceMAAdmin states for an interface · Integer32
The Admin state of this interface
jnxOpticsOTIfOperState
1.3.6.1.4.1.2636.3.71.1.1.8.1.10
JnxOpticsOTIfOperStates1 = jnxOperStateInit2 = jnxOperStateNormal3 = jnxOperStateFault4 = jnxOperStateDegradedOperational states for an interface · Integer32
The operational state of this interface
jnxOpticsOTIfHighPolarization
1.3.6.1.4.1.2636.3.71.1.1.8.1.11
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
Enable/disable high-polarization mode.
jnxOpticsOTIfPreFecBERThresholdMantissa
1.3.6.1.4.1.2636.3.71.1.1.8.1.12
Integer32
This will set the BER threshold(mantissa), which when crossed will trigger Signal Degrade.
jnxOpticsOTIfPreFecBERThresholdExponent
1.3.6.1.4.1.2636.3.71.1.1.8.1.13
Integer32
This will set the BER threshold(exponent), which when crossed will trigger Signal Degrade.
jnxOpticsOTIfPreFecBERThresholdTime
1.3.6.1.4.1.2636.3.71.1.1.8.1.14
Integer32 · ms
Specify the interval for which the BER must stay above the signal degradation threshold or below the clear threshold for the alarm to be raised or cleared respectively.
jnxOpticsOTIfPreFecBERThresholdClearMantissa
1.3.6.1.4.1.2636.3.71.1.1.8.1.15
Integer32
This will set the BER threshold(mantissa) for clear signal degrade condition, which signal degrade condition will be cleared when Pre-Fec error count is below the clear threshold error count.
jnxOpticsOTIfPreFecBERThresholdClearExponent
1.3.6.1.4.1.2636.3.71.1.1.8.1.16
Integer32
This will set the BER threshold(exponent) for clear signal degrade condition, which signal degrade condition will be cleared when Pre-Fec error count is below the clear threshold error count.
jnxOpticsPMCurrentTable
1.3.6.1.4.1.2636.3.71.1.2.1
Index: ifIndex
A table of current PM entries for coherent optics.
from IF-MIB
ifIndex
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
jnxPMCurChromaticDispersion
1.3.6.1.4.1.2636.3.71.1.2.1.1.1
Integer32 · ps/nm
Chromatic Dispersion measured at Rx Transceiver port
jnxPMCurDiffGroupDelay
1.3.6.1.4.1.2636.3.71.1.2.1.1.2
Integer32 · ps
Differential group delay
jnxPMCurPolarizationState
1.3.6.1.4.1.2636.3.71.1.2.1.1.3
Integer32 · rad/s
Polarization state
jnxPMCurPolarDepLoss
1.3.6.1.4.1.2636.3.71.1.2.1.1.4
Integer32 · 0.1 dB
The polarisation dependent loss (PDL) is the difference (in dB) between the maximum and minimum values of the channel insertion loss (or gain) of the black-link from point SS to RS due to a variation of the state of polarization (SOP) over all SOPs
jnxPMCurQ
1.3.6.1.4.1.2636.3.71.1.2.1.1.5
Integer32 · 0.1 dB
'Q' factor estimated at Rx Transceiver port
jnxPMCurSNR
1.3.6.1.4.1.2636.3.71.1.2.1.1.6
Integer32 · 0.1 dB
SNR - signal to noise ratio
jnxPMCurTxOutputPower
1.3.6.1.4.1.2636.3.71.1.2.1.1.7
Integer32 · 0.01 dbm
TxOutputPower - transmit output power
jnxPMCurRxInputPower
1.3.6.1.4.1.2636.3.71.1.2.1.1.8
Integer32 · 0.01 dbm
RxInputPower - receive output power
jnxPMCurMinChromaticDispersion
1.3.6.1.4.1.2636.3.71.1.2.1.1.9
Integer32 · ps/nm
Min Chromatic Dispersion measured at Rx Transceiver port
jnxPMCurMaxChromaticDispersion
1.3.6.1.4.1.2636.3.71.1.2.1.1.10
Integer32 · ps/nm
Max Chromatic Dispersion measured at Rx Transceiver port
jnxPMCurAvgChromaticDispersion
1.3.6.1.4.1.2636.3.71.1.2.1.1.11
Integer32 · ps/nm
Average Chromatic Dispersion measured at Rx Transceiver port
jnxPMCurMinDiffGroupDelay
1.3.6.1.4.1.2636.3.71.1.2.1.1.12
Integer32 · ps
Min Differential group delay
jnxPMCurMaxDiffGroupDelay
1.3.6.1.4.1.2636.3.71.1.2.1.1.13
Integer32 · ps
Max Differential group delay
jnxPMCurAvgDiffGroupDelay
1.3.6.1.4.1.2636.3.71.1.2.1.1.14
Integer32 · ps
Average Differential group delay
jnxPMCurMinPolarState
1.3.6.1.4.1.2636.3.71.1.2.1.1.15
Integer32 · rad/s
Min Polarization state
jnxPMCurMaxPolarState
1.3.6.1.4.1.2636.3.71.1.2.1.1.16
Integer32 · rad/s
Max Polarization state
jnxPMCurAvgPolarState
1.3.6.1.4.1.2636.3.71.1.2.1.1.17
Integer32 · rad/s
Avg Polarization state
jnxPMCurMinPolarDepLoss
1.3.6.1.4.1.2636.3.71.1.2.1.1.18
Integer32 · 0.1 dB
Min - The polarisation dependent loss (PDL)
jnxPMCurMaxPolarDepLoss
1.3.6.1.4.1.2636.3.71.1.2.1.1.19
Integer32 · 0.1 dB
Max - The polarisation dependent loss (PDL)
jnxPMCurAvgPolarDepLoss
1.3.6.1.4.1.2636.3.71.1.2.1.1.20
Integer32 · 0.1 dB
Avg - The polarisation dependent loss (PDL)
jnxPMCurMinQ
1.3.6.1.4.1.2636.3.71.1.2.1.1.21
Integer32 · 0.1 dB
Min 'Q' factor estimated at Rx Transceiver port
jnxPMCurMaxQ
1.3.6.1.4.1.2636.3.71.1.2.1.1.22
Integer32 · 0.1 dB
Max 'Q' factor estimated at Rx Transceiver port
jnxPMCurAvgQ
1.3.6.1.4.1.2636.3.71.1.2.1.1.23
Integer32 · 0.1 dB
Avg 'Q' factor estimated at Rx Transceiver port
jnxPMCurMinSNR
1.3.6.1.4.1.2636.3.71.1.2.1.1.24
Integer32 · 0.1 dB
Min SNR - signal to noise ratio
jnxPMCurMaxSNR
1.3.6.1.4.1.2636.3.71.1.2.1.1.25
Integer32 · 0.1 dB
Max SNR - signal to noise ratio
jnxPMCurAvgSNR
1.3.6.1.4.1.2636.3.71.1.2.1.1.26
Integer32 · 0.1 dB
Avg SNR - signal to noise ratio
jnxPMCurMinTxOutputPower
1.3.6.1.4.1.2636.3.71.1.2.1.1.27
Integer32 · 0.01 dbm
Min TxOutputPower - transmit output power
jnxPMCurMaxTxOutputPower
1.3.6.1.4.1.2636.3.71.1.2.1.1.28
Integer32 · 0.01 dbm
Max TxOutputPower - transmit output power
jnxPMCurAvgTxOutputPower
1.3.6.1.4.1.2636.3.71.1.2.1.1.29
Integer32 · 0.01 dbm
Avg TxOutputPower - transmit output power
jnxPMCurMinRxInputPower
1.3.6.1.4.1.2636.3.71.1.2.1.1.30
Integer32 · 0.01 dbm
Min RxInputPower - receive output power
jnxPMCurMaxRxInputPower
1.3.6.1.4.1.2636.3.71.1.2.1.1.31
Integer32 · 0.01 dbm
Max RxInputPower - receive output power
jnxPMCurAvgRxInputPower
1.3.6.1.4.1.2636.3.71.1.2.1.1.32
Integer32 · 0.01 dbm
Avg RxInputPower - receive output power
jnxPMCurSuspectedFlag
1.3.6.1.4.1.2636.3.71.1.2.1.1.33
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
If true, the data in this entry may be unreliable.
jnxPMCurSuspectReason
1.3.6.1.4.1.2636.3.71.1.2.1.1.34
JnxOpticsSuspectReason0 = notApplicable1 = unknown2 = newObject3 = interfaceDisabled4 = clockShiftDetected5 = userCleared6 = insufficientSampling7 = missingSubIntervals8 = monitoringDisruption9 = dataNotAvailableReason for why PM bin validity is suspect · Integer32
If jnxPMCurSuspectedFlag is true, provides the reason.
jnxPMCurTxLaserBiasCurrent
1.3.6.1.4.1.2636.3.71.1.2.1.1.35
Integer32 · .1 mA
Trasmit LaserBiasCurrent measured at Transceiver port
jnxPMCurMinTxLaserBiasCurrent
1.3.6.1.4.1.2636.3.71.1.2.1.1.36
Integer32 · .1 mA
Minimum trasmit LaserBiasCurrent measured at Transceiver port
jnxPMCurMaxTxLaserBiasCurrent
1.3.6.1.4.1.2636.3.71.1.2.1.1.37
Integer32 · .1 mA
Maximum trasmit LaserBiasCurrent measured at Transceiver port
jnxPMCurAvgTxLaserBiasCurrent
1.3.6.1.4.1.2636.3.71.1.2.1.1.38
Integer32 · .1 mA
Average LaserBiasCurrent measured at Transceiver port
jnxPMCurTemperature
1.3.6.1.4.1.2636.3.71.1.2.1.1.39
Integer32 · .1 Celcius
Module Temperature
jnxPMCurMinTemperature
1.3.6.1.4.1.2636.3.71.1.2.1.1.40
Integer32 · .1 Celcius
Minimum Module Temperature
jnxPMCurMaxTemperature
1.3.6.1.4.1.2636.3.71.1.2.1.1.41
Integer32 · .1 Celcius
Maximum Module Temperature
jnxPMCurAvgTemperature
1.3.6.1.4.1.2636.3.71.1.2.1.1.42
Integer32 · .1 Celcius
Average Module Temperature
jnxPMCurCarFreqOffset
1.3.6.1.4.1.2636.3.71.1.2.1.1.43
Integer32 · MHz
Carrier frequency offset measured at Transceiver port
jnxPMCurMinCarFreqOffset
1.3.6.1.4.1.2636.3.71.1.2.1.1.44
Integer32 · MHz
Minimum Carrier frequency offset measured at Transceiver port
jnxPMCurMaxCarFreqOffset
1.3.6.1.4.1.2636.3.71.1.2.1.1.45
Integer32 · MHz
Maximum Carrier frequency offset measured at Transceiver port
jnxPMCurAvgCarFreqOffset
1.3.6.1.4.1.2636.3.71.1.2.1.1.46
Integer32 · MHz
Average Carrier frequency offset measured at Transceiver port
jnxPMCurRxLaserBiasCurrent
1.3.6.1.4.1.2636.3.71.1.2.1.1.47
Integer32 · .1 mA
Received LaserBiasCurrent measured at Transceiver port
jnxPMCurMinRxLaserBiasCurrent
1.3.6.1.4.1.2636.3.71.1.2.1.1.48
Integer32 · .1 mA
Received Minimum LaserBiasCurrent measured at Transceiver port
jnxPMCurMaxRxLaserBiasCurrent
1.3.6.1.4.1.2636.3.71.1.2.1.1.49
Integer32 · .1 mA
Received Maximum LaserBiasCurrent measured at Transceiver port
jnxPMCurAvgRxLaserBiasCurrent
1.3.6.1.4.1.2636.3.71.1.2.1.1.50
Integer32 · .1 mA
Received Average LaserBiasCurrent measured at Transceiver port
jnxPMCurTecCurrent
1.3.6.1.4.1.2636.3.71.1.2.1.1.51
Integer32 · .1 mA
Received TecCurrent measured at Transceiver port
jnxPMCurMinTecCurrent
1.3.6.1.4.1.2636.3.71.1.2.1.1.52
Integer32 · .1 mA
Received Minimum TecCurrent measured at Transceiver port
jnxPMCurMaxTecCurrent
1.3.6.1.4.1.2636.3.71.1.2.1.1.53
Integer32 · .1 mA
Received Maximum TecCurrent measured at Transceiver port
jnxPMCurAvgTecCurrent
1.3.6.1.4.1.2636.3.71.1.2.1.1.54
Integer32 · .1 mA
Received Average TecCurrent measured at Transceiver port
jnxPMCurResidualDispersion
1.3.6.1.4.1.2636.3.71.1.2.1.1.55
Integer32 · .1 ps/nm
Residual Dispersion measured at Transceiver port
jnxPMCurMinResidualDispersion
1.3.6.1.4.1.2636.3.71.1.2.1.1.56
Integer32 · .1 ps/nm
Minimum Residual Dispersion measured at Transceiver port
jnxPMCurMaxResidualDispersion
1.3.6.1.4.1.2636.3.71.1.2.1.1.57
Integer32 · .1 ps/nm
Maximum Residual Dispersion measured at Transceiver port
jnxPMCurAvgResidualDispersion
1.3.6.1.4.1.2636.3.71.1.2.1.1.58
Integer32 · .1 ps/nm
Average Residual Dispersion measured at Transceiver port
jnxPMCurLevelHistogram
1.3.6.1.4.1.2636.3.71.1.2.1.1.59
Integer32
The rate of measured signal at Transceiver port
jnxPMCurMinLevelHistogram
1.3.6.1.4.1.2636.3.71.1.2.1.1.60
Integer32
The Minimum rate of measured signal at Transceiver port
jnxPMCurMaxLevelHistogram
1.3.6.1.4.1.2636.3.71.1.2.1.1.61
Integer32
The Maximum rate of measured signal at Transceiver port
jnxPMCurAvgLevelHistogram
1.3.6.1.4.1.2636.3.71.1.2.1.1.62
Integer32
The Average rate of measured signal at Transceiver port
jnxPMCurLaserFrequencyError
1.3.6.1.4.1.2636.3.71.1.2.1.1.63
Integer32 · MHz
Laser Frequency Error measured at Transceiver port
jnxPMCurMinLaserFrequencyError
1.3.6.1.4.1.2636.3.71.1.2.1.1.64
Integer32 · MHz
Minimum Laser Frequency Error measured at Transceiver port
jnxPMCurMaxLaserFrequencyError
1.3.6.1.4.1.2636.3.71.1.2.1.1.65
Integer32 · MHz
Maximum Laser Frequency Error measured at Transceiver port
jnxPMCurAvgLaserFrequencyError
1.3.6.1.4.1.2636.3.71.1.2.1.1.66
Integer32 · MHz
Average Laser Frequency Error measured at Transceiver port
jnxPMCurFECCorrectedErrorsMantissa
1.3.6.1.4.1.2636.3.71.1.2.1.1.67
Integer32
Pre-FEC BER - provides the mantissa value for Pre-FEC BER expressed in scientific notation
jnxPMCurFECCorrectedErrorsExponent
1.3.6.1.4.1.2636.3.71.1.2.1.1.68
Integer32
Pre-FEC BER - provides the negetive exponent value for Pre-FEC BER expressed in scientific notation
jnxPMCurMinFECCorrectedErrorsMantissa
1.3.6.1.4.1.2636.3.71.1.2.1.1.69
Integer32
Minimum Pre-FEC BER - provides the mantissa value for Pre-FEC BER expressed in scientific notation
jnxPMCurMinFECCorrectedErrorsExponent
1.3.6.1.4.1.2636.3.71.1.2.1.1.70
Integer32
Minimum Pre-FEC BER - provides the negetive exponent value for Pre-FEC BER expressed in scientific notation
jnxPMCurMaxFECCorrectedErrorsMantissa
1.3.6.1.4.1.2636.3.71.1.2.1.1.71
Integer32
Maximum Pre-FEC BER - provides the mantissa value for Pre-FEC BER expressed in scientific notation
jnxPMCurMaxFECCorrectedErrorsExponent
1.3.6.1.4.1.2636.3.71.1.2.1.1.72
Integer32
Maximum Pre-FEC BER - provides the negetive exponent value for Pre-FEC BER expressed in scientific notation
jnxPMCurAvgFECCorrectedErrorsMantissa
1.3.6.1.4.1.2636.3.71.1.2.1.1.73
Integer32
Average Pre-FEC BER - provides the mantissa value for Pre-FEC BER expressed in scientific notation
jnxPMCurAvgFECCorrectedErrorsExponent
1.3.6.1.4.1.2636.3.71.1.2.1.1.74
Integer32
Average Pre-FEC BER - provides the negetive exponent value for Pre-FEC BER expressed in scientific notation
jnxPMCurFECUCorrectedWordsMantissa
1.3.6.1.4.1.2636.3.71.1.2.1.1.75
Integer32
Uncorrected BER - provides the mantissa value for Uncorrected BER expressed in scientific notation
jnxPMCurFECUCorrectedWordsExponent
1.3.6.1.4.1.2636.3.71.1.2.1.1.76
Integer32
Uncorrected BER - provides the negetive exponent value for Uncorrected BER expressed in scientific notation
jnxPMCurMinFECUCorrectedWordsMantissa
1.3.6.1.4.1.2636.3.71.1.2.1.1.77
Integer32
Minimum Uncorrected BER - provides the mantissa value for Uncorrected BER expressed in scientific notation
jnxPMCurMinFECUCorrectedWordsExponent
1.3.6.1.4.1.2636.3.71.1.2.1.1.78
Integer32
Minimum Uncorrected BER - provides the negetive exponent value for Uncorrected BER expressed in scientific notation
jnxPMCurMaxFECUCorrectedWordsMantissa
1.3.6.1.4.1.2636.3.71.1.2.1.1.79
Integer32
Maximum Uncorrected BER - provides the mantissa value for Uncorrected BER expressed in scientific notation
jnxPMCurMaxFECUCorrectedWordsExponent
1.3.6.1.4.1.2636.3.71.1.2.1.1.80
Integer32
Maximum Uncorrected BER - provides the negetive exponent value for Uncorrected BER expressed in scientific notation
jnxPMCurAvgFECUCorrectedWordsMantissa
1.3.6.1.4.1.2636.3.71.1.2.1.1.81
Integer32
Average Uncorrected BER - provides the mantissa value for Uncorrected BER expressed in scientific notation
jnxPMCurAvgFECUCorrectedWordsExponent
1.3.6.1.4.1.2636.3.71.1.2.1.1.82
Integer32
Average Uncorrected BER - provides the negetive exponent value for Uncorrected BER expressed in scientific notation
jnxPMCurRxSignalPower
1.3.6.1.4.1.2636.3.71.1.2.1.1.83
Integer32 · 0.01 dbm
RxSignalPower - receive signal power
jnxPMCurMinRxSignalPower
1.3.6.1.4.1.2636.3.71.1.2.1.1.84
Integer32 · 0.01 dbm
Min RxSignalPower - receive signal power
jnxPMCurMaxRxSignalPower
1.3.6.1.4.1.2636.3.71.1.2.1.1.85
Integer32 · 0.01 dbm
Max RxSignalPower - receive signal power
jnxPMCurAvgRxSignalPower
1.3.6.1.4.1.2636.3.71.1.2.1.1.86
Integer32 · 0.01 dbm
Avg RxSignalPower - receive signal power
jnxPMCurOSNR
1.3.6.1.4.1.2636.3.71.1.2.1.1.87
Integer32 · 0.1 dB
OSNR - optical signal to noise ratio
jnxPMCurMinOSNR
1.3.6.1.4.1.2636.3.71.1.2.1.1.88
Integer32 · 0.1 dB
Min OSNR - optical signal to noise ratio
jnxPMCurMaxOSNR
1.3.6.1.4.1.2636.3.71.1.2.1.1.89
Integer32 · 0.1 dB
Max OSNR - optical signal to noise ratio
jnxPMCurAvgOSNR
1.3.6.1.4.1.2636.3.71.1.2.1.1.90
Integer32 · 0.1 dB
Avg OSNR - optical signal to noise ratio
jnxPMCurSOPMD
1.3.6.1.4.1.2636.3.71.1.2.1.1.91
Integer32 · 0.1 ps^2
SOPMD - second-order polarization mode dispersion
jnxPMCurMinSOPMD
1.3.6.1.4.1.2636.3.71.1.2.1.1.92
Integer32 · 0.1 ps^2
Min SOPMD - second-order polarization mode dispersion
jnxPMCurMaxSOPMD
1.3.6.1.4.1.2636.3.71.1.2.1.1.93
Integer32 · 0.1 ps^2
Max SOPMD - second-order polarization mode dispersion
jnxPMCurAvgSOPMD
1.3.6.1.4.1.2636.3.71.1.2.1.1.94
Integer32 · 0.1 ps^2
Avg SOPMD - second-order polarization mode dispersion
jnxPMCurSupplyVoltage
1.3.6.1.4.1.2636.3.71.1.2.1.1.95
Integer32 · 0.01 V
Supply Voltage
jnxPMCurMinSupplyVoltage
1.3.6.1.4.1.2636.3.71.1.2.1.1.96
Integer32 · 0.01 V
Minimum Supply Voltage
jnxPMCurMaxSupplyVoltage
1.3.6.1.4.1.2636.3.71.1.2.1.1.97
Integer32 · 0.01 V
Maximum Supply Voltage
jnxPMCurAvgSupplyVoltage
1.3.6.1.4.1.2636.3.71.1.2.1.1.98
Integer32 · 0.01 V
Average Supply Voltage
jnxPMCurSOPROC
1.3.6.1.4.1.2636.3.71.1.2.1.1.99
Integer32 · krad/s
SOPROC - State of Polarisation Rate of Change
jnxPMCurMinSOPROC
1.3.6.1.4.1.2636.3.71.1.2.1.1.100
Integer32 · krad/s
Minimum SOPROC - State of Polarisation Rate of Change
jnxPMCurMaxSOPROC
1.3.6.1.4.1.2636.3.71.1.2.1.1.101
Integer32 · krad/s
Maximum SOPROC - State of Polarisation Rate of Change
jnxPMCurAvgSOPROC
1.3.6.1.4.1.2636.3.71.1.2.1.1.102
Integer32 · krad/s
Average SOPROC - State of Polarisation Rate of Change
jnxPMCurModulatorBiasXI
1.3.6.1.4.1.2636.3.71.1.2.1.1.103
Integer32 · 0.01 %
Modulator Bias XI
jnxPMCurMinModulatorBiasXI
1.3.6.1.4.1.2636.3.71.1.2.1.1.104
Integer32 · 0.01 %
Minimum Modulator Bias XI
jnxPMCurMaxModulatorBiasXI
1.3.6.1.4.1.2636.3.71.1.2.1.1.105
Integer32 · 0.01 %
Maximum Modulator Bias XI
jnxPMCurAvgModulatorBiasXI
1.3.6.1.4.1.2636.3.71.1.2.1.1.106
Integer32 · 0.01 %
Average Modulator Bias XI
jnxPMCurModulatorBiasXQ
1.3.6.1.4.1.2636.3.71.1.2.1.1.107
Integer32 · 0.01 %
Modulator Bias XQ
jnxPMCurMinModulatorBiasXQ
1.3.6.1.4.1.2636.3.71.1.2.1.1.108
Integer32 · 0.01 %
Minimum Modulator Bias XQ
jnxPMCurMaxModulatorBiasXQ
1.3.6.1.4.1.2636.3.71.1.2.1.1.109
Integer32 · 0.01 %
Maximum Modulator Bias XQ
jnxPMCurAvgModulatorBiasXQ
1.3.6.1.4.1.2636.3.71.1.2.1.1.110
Integer32 · 0.01 %
Average Modulator Bias XQ
jnxPMCurModulatorBiasYI
1.3.6.1.4.1.2636.3.71.1.2.1.1.111
Integer32 · 0.01 %
Modulator Bias YI
jnxPMCurMinModulatorBiasYI
1.3.6.1.4.1.2636.3.71.1.2.1.1.112
Integer32 · 0.01 %
Minimum Modulator Bias YI
jnxPMCurMaxModulatorBiasYI
1.3.6.1.4.1.2636.3.71.1.2.1.1.113
Integer32 · 0.01 %
Maximum Modulator Bias YI
jnxPMCurAvgModulatorBiasYI
1.3.6.1.4.1.2636.3.71.1.2.1.1.114
Integer32 · 0.01 %
Average Modulator Bias YI
jnxPMCurModulatorBiasYQ
1.3.6.1.4.1.2636.3.71.1.2.1.1.115
Integer32 · 0.01 %
Modulator Bias YQ
jnxPMCurMinModulatorBiasYQ
1.3.6.1.4.1.2636.3.71.1.2.1.1.116
Integer32 · 0.01 %
Minimum Modulator Bias YQ
jnxPMCurMaxModulatorBiasYQ
1.3.6.1.4.1.2636.3.71.1.2.1.1.117
Integer32 · 0.01 %
Maximum Modulator Bias YQ
jnxPMCurAvgModulatorBiasYQ
1.3.6.1.4.1.2636.3.71.1.2.1.1.118
Integer32 · 0.01 %
Average Modulator Bias YQ
jnxPMCurModulatorBiasXPhase
1.3.6.1.4.1.2636.3.71.1.2.1.1.119
Integer32 · 0.01 %
Modulator Bias XPhase
jnxPMCurMinModulatorBiasXPhase
1.3.6.1.4.1.2636.3.71.1.2.1.1.120
Integer32 · 0.01 %
Minimum Modulator Bias XPhase
jnxPMCurMaxModulatorBiasXPhase
1.3.6.1.4.1.2636.3.71.1.2.1.1.121
Integer32 · 0.01 %
Maximum Modulator Bias XPhase
jnxPMCurAvgModulatorBiasXPhase
1.3.6.1.4.1.2636.3.71.1.2.1.1.122
Integer32 · 0.01 %
Average Modulator Bias XPhase
jnxPMCurModulatorBiasYPhase
1.3.6.1.4.1.2636.3.71.1.2.1.1.123
Integer32 · 0.01 %
Modulator Bias YPhase
jnxPMCurMinModulatorBiasYPhase
1.3.6.1.4.1.2636.3.71.1.2.1.1.124
Integer32 · 0.01 %
Minimum Modulator Bias YPhase
jnxPMCurMaxModulatorBiasYPhase
1.3.6.1.4.1.2636.3.71.1.2.1.1.125
Integer32 · 0.01 %
Maximum Modulator Bias YPhase
jnxPMCurAvgModulatorBiasYPhase
1.3.6.1.4.1.2636.3.71.1.2.1.1.126
Integer32 · 0.01 %
Average Modulator Bias YPhase
jnxPMCurQMargin
1.3.6.1.4.1.2636.3.71.1.2.1.1.127
Integer32 · 0.1 db
Q Margin
jnxPMCurMinQMargin
1.3.6.1.4.1.2636.3.71.1.2.1.1.128
Integer32 · 0.1 db
Minimum Q Margin
jnxPMCurMaxQMargin
1.3.6.1.4.1.2636.3.71.1.2.1.1.129
Integer32 · 0.1 db
Maximum Q Margin
jnxPMCurAvgQMargin
1.3.6.1.4.1.2636.3.71.1.2.1.1.130
Integer32 · 0.1 db
Average Q Margin
jnxOpticsPMIntervalTable
1.3.6.1.4.1.2636.3.71.1.2.2
Index: ifIndex · jnxOpticsPMIntervalNumber
A table of interval PM entries for coherent optics.
from IF-MIB
ifIndex
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
jnxOpticsPMIntervalNumber
1.3.6.1.4.1.2636.3.71.1.2.2.1.1
Unsigned32 (1..96)
This is the 15 mintute interval number.
jnxPMIntMinChromaticDispersion
1.3.6.1.4.1.2636.3.71.1.2.2.1.2
Integer32 · ps/nm
Chromatic Dispersion measured at Rx Transceiver port - min in the 15 minute interval
jnxPMIntMaxChromaticDispersion
1.3.6.1.4.1.2636.3.71.1.2.2.1.3
Integer32 · ps/nm
Chromatic Dispersion measured at Rx Transceiver port - max in the 15 minute interval
jnxPMIntAvgChromaticDispersion
1.3.6.1.4.1.2636.3.71.1.2.2.1.4
Integer32 · ps/nm
Chromatic Dispersion measured at Rx Transceiver port - average in the 15 minute interval
jnxPMIntMinDiffGroupDelay
1.3.6.1.4.1.2636.3.71.1.2.2.1.5
Integer32 · ps
Differential group delay measured at Rx Transceiver port -- min in the 15 minute interval
jnxPMIntMaxDiffGroupDelay
1.3.6.1.4.1.2636.3.71.1.2.2.1.6
Integer32 · ps
Differential group delay measured at Rx Transceiver port -- max in the 15 minute interval
jnxPMIntAvgDiffGroupDelay
1.3.6.1.4.1.2636.3.71.1.2.2.1.7
Integer32 · ps
Differential group delay measured at Rx Transceiver port -- average in the 15 minute interval
jnxPMIntMinPolarState
1.3.6.1.4.1.2636.3.71.1.2.2.1.8
Integer32 · rad/s
Polarization state -- min in the 15 minute interval
jnxPMIntMaxPolarState
1.3.6.1.4.1.2636.3.71.1.2.2.1.9
Integer32 · rad/s
Polarization state -- max in the 15 minute interval
jnxPMIntAvgPolarState
1.3.6.1.4.1.2636.3.71.1.2.2.1.10
Integer32 · rad/s
Polarization state -- average in the 15 minute interval
jnxPMIntMinPolarDependentLoss
1.3.6.1.4.1.2636.3.71.1.2.2.1.11
Integer32 · 0.1 dB
Polarization Dependent Loss -- min in the 15 minute interval
jnxPMIntMaxPolarDependentLoss
1.3.6.1.4.1.2636.3.71.1.2.2.1.12
Integer32 · 0.1 dB
Polarization Dependent Loss -- max in the 15 minute interval
jnxPMIntAvgPolarDependentLoss
1.3.6.1.4.1.2636.3.71.1.2.2.1.13
Integer32 · 0.1 dB
Polarization Dependent Loss -- average in the 15 minute interval
jnxPMIntMinQ
1.3.6.1.4.1.2636.3.71.1.2.2.1.14
Integer32 · 0.1 dB
Q -- min in the 15 minute interval
jnxPMIntMaxQ
1.3.6.1.4.1.2636.3.71.1.2.2.1.15
Integer32 · 0.1 dB
Q -- max in the 15 minute interval
jnxPMIntAvgQ
1.3.6.1.4.1.2636.3.71.1.2.2.1.16
Integer32 · 0.1 dB
Q -- Avg in the 15 minute interval
jnxPMIntMinSNR
1.3.6.1.4.1.2636.3.71.1.2.2.1.17
Integer32 · 0.1 dB
SNR -- min in the 15 minute interval
jnxPMIntMaxSNR
1.3.6.1.4.1.2636.3.71.1.2.2.1.18
Integer32 · 0.1 dB
SNR -- max in the 15 minute interval
jnxPMIntAvgSNR
1.3.6.1.4.1.2636.3.71.1.2.2.1.19
Integer32 · 0.1 dB
SNR -- avg in the 15 minute interval
jnxPMIntMinTxOutputPower
1.3.6.1.4.1.2636.3.71.1.2.2.1.20
Integer32 · 0.01 dbm
TxOutputPower -- min in the 15 minute interval
jnxPMIntMaxTxOutputPower
1.3.6.1.4.1.2636.3.71.1.2.2.1.21
Integer32 · 0.01 dbm
TxOutputPower -- max in the 15 minute interval
jnxPMIntAvgTxOutputPower
1.3.6.1.4.1.2636.3.71.1.2.2.1.22
Integer32 · 0.01 dbm
TxOutputPower -- average in the 15 minute interval
jnxPMIntMinRxInputPower
1.3.6.1.4.1.2636.3.71.1.2.2.1.23
Integer32 · 0.01 dbm
RxInputPower -- min in the 15 minute interval
jnxPMIntMaxRxInputPower
1.3.6.1.4.1.2636.3.71.1.2.2.1.24
Integer32 · 0.01 dbm
RxInputPower -- max in the 15 minute interval
jnxPMIntAvgRxInputPower
1.3.6.1.4.1.2636.3.71.1.2.2.1.25
Integer32 · 0.01 dbm
RxInputPower -- average in the 15 minute interval
jnxPMIntTimeStamp
1.3.6.1.4.1.2636.3.71.1.2.2.1.26
DateAndTimeA date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC* 0..13 10 11 minutes from UTC 0..59 * Notes: - the value of year is in network-byte order - daylight saving time in New Zealand is +13 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 Note that if only local time is known, then timezone information (fields 8-10) is not present. SIZE (8 | 11) · OCTET STRING · hint 2d-1d-1d,1d:1d:1d.1d,1a1d:1d
Time stamp PM interval
jnxPMIntSuspectedFlag
1.3.6.1.4.1.2636.3.71.1.2.2.1.27
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
If true, the data in this entry may be unreliable.
jnxPMIntSuspectReason
1.3.6.1.4.1.2636.3.71.1.2.2.1.28
JnxOpticsSuspectReason0 = notApplicable1 = unknown2 = newObject3 = interfaceDisabled4 = clockShiftDetected5 = userCleared6 = insufficientSampling7 = missingSubIntervals8 = monitoringDisruption9 = dataNotAvailableReason for why PM bin validity is suspect · Integer32
If jnxPMIntSuspectedFlag is true, provides the reason.
jnxPMIntMinTxLaserBiasCurrent
1.3.6.1.4.1.2636.3.71.1.2.2.1.29
Integer32 · .1 mA
Transmit Minimum LaserBiasCurrent measured at Transceiver port
jnxPMIntMaxTxLaserBiasCurrent
1.3.6.1.4.1.2636.3.71.1.2.2.1.30
Integer32 · .1 mA
Transmit Maximum LaserBiasCurrent measured at Transceiver port
jnxPMIntAvgTxLaserBiasCurrent
1.3.6.1.4.1.2636.3.71.1.2.2.1.31
Integer32 · .1 mA
Transmit Average LaserBiasCurrent measured at Transceiver port
jnxPMIntMinTemperature
1.3.6.1.4.1.2636.3.71.1.2.2.1.32
Integer32 · .1 Celcius
Minimum Module Temperature
jnxPMIntMaxTemperature
1.3.6.1.4.1.2636.3.71.1.2.2.1.33
Integer32 · .1 Celcius
Maximum Module Temperature
jnxPMIntAvgTemperature
1.3.6.1.4.1.2636.3.71.1.2.2.1.34
Integer32 · .1 Celcius
Average Module Temperature
jnxPMIntMinCarFreqOffset
1.3.6.1.4.1.2636.3.71.1.2.2.1.35
Integer32 · Mhz
Minimum Carrier frequency offset measured at Transceiver port
jnxPMIntMaxCarFreqOffset
1.3.6.1.4.1.2636.3.71.1.2.2.1.36
Integer32 · MHz
Maximum Carrier frequency offset measured at Transceiver port
jnxPMIntAvgCarFreqOffset
1.3.6.1.4.1.2636.3.71.1.2.2.1.37
Integer32 · MHz
Average Carrier frequency offset measured at Transceiver port
jnxPMIntMinRxLaserBiasCurrent
1.3.6.1.4.1.2636.3.71.1.2.2.1.38
Integer32 · .1 mA
Receive Minimum LaserBiasCurrent measured at Transceiver port
jnxPMIntMaxRxLaserBiasCurrent
1.3.6.1.4.1.2636.3.71.1.2.2.1.39
Integer32 · .1 mA
Receive Maximum LaserBiasCurrent measured at Transceiver port
jnxPMIntAvgRxLaserBiasCurrent
1.3.6.1.4.1.2636.3.71.1.2.2.1.40
Integer32 · .1 mA
Receive Average LaserBiasCurrent measured at Transceiver port
jnxPMIntMinTecCurrent
1.3.6.1.4.1.2636.3.71.1.2.2.1.41
Integer32 · .1 mA
Received Minimum TecCurrent measured at Transceiver port -- min in the 15 minute interval
jnxPMIntMaxTecCurrent
1.3.6.1.4.1.2636.3.71.1.2.2.1.42
Integer32 · .1 mA
Received Maximum TecCurrent measured at Transceiver port -- min in the 15 minute interval
jnxPMIntAvgTecCurrent
1.3.6.1.4.1.2636.3.71.1.2.2.1.43
Integer32 · .1 mA
Received Average TecCurrent measured at Transceiver port -- min in the 15 minute interval
jnxPMIntMinResidualDispersion
1.3.6.1.4.1.2636.3.71.1.2.2.1.44
Integer32 · ps/nm
Minimum Residual Dispersion measured at Transceiver port -- min in the 15 minute interval
jnxPMIntMaxResidualDispersion
1.3.6.1.4.1.2636.3.71.1.2.2.1.45
Integer32 · ps/nm
Maximum Residual Dispersion measured at Transceiver port -- min in the 15 minute interval
jnxPMIntAvgResidualDispersion
1.3.6.1.4.1.2636.3.71.1.2.2.1.46
Integer32 · ps/nm
Average Residual Dispersion measured at Transceiver port -- min in the 15 minute interval
jnxPMIntMinLevelHistogram
1.3.6.1.4.1.2636.3.71.1.2.2.1.47
Integer32
The Minimum rate of measured signal at Transceiver port -- min in the 15 minute interval
jnxPMIntMaxLevelHistogram
1.3.6.1.4.1.2636.3.71.1.2.2.1.48
Integer32
The Maximum rate of measured signal at Transceiver port -- min in the 15 minute interval
jnxPMIntAvgLevelHistogram
1.3.6.1.4.1.2636.3.71.1.2.2.1.49
Integer32
The Average rate of measured signal at Transceiver port -- min in the 15 minute interval
jnxPMIntMinLaserFrequencyError
1.3.6.1.4.1.2636.3.71.1.2.2.1.50
Integer32 · .1 Celcius
Minimum Laser Frequency Error measured at Transceiver port -- min in the 15 minute interval
jnxPMIntMaxLaserFrequencyError
1.3.6.1.4.1.2636.3.71.1.2.2.1.51
Integer32 · .1 Celcius
Maximum Laser Frequency Error measured at Transceiver port -- min in the 15 minute interval
jnxPMIntAvgLaserFrequencyError
1.3.6.1.4.1.2636.3.71.1.2.2.1.52
Integer32 · .1 Celcius
Average Laser Frequency Error measured at Transceiver port -- min in the 15 minute interval
jnxPMIntMinFECCorrectedErrorsMantissa
1.3.6.1.4.1.2636.3.71.1.2.2.1.53
Integer32
Minimum Pre-FEC BER - provides the mantissa value for Pre-FEC BER expressed in scientific notation -- min in the 15 minute interval
jnxPMIntMinFECCorrectedErrorsExponent
1.3.6.1.4.1.2636.3.71.1.2.2.1.54
Integer32
Minimum Pre-FEC BER - provides the negetive exponent value for Pre-FEC BER expressed in scientific notation -- min in the 15 minute interval
jnxPMIntMaxFECCorrectedErrorsMantissa
1.3.6.1.4.1.2636.3.71.1.2.2.1.55
Integer32
Maximum Pre-FEC BER - provides the mantissa value for Pre-FEC BER expressed in scientific notation -- min in the 15 minute interval
jnxPMIntMaxFECCorrectedErrorsExponent
1.3.6.1.4.1.2636.3.71.1.2.2.1.56
Integer32
Maximum Pre-FEC BER - provides the negetive exponent value for Pre-FEC BER expressed in scientific notation -- min in the 15 minute interval
jnxPMIntAvgFECCorrectedErrorsMantissa
1.3.6.1.4.1.2636.3.71.1.2.2.1.57
Integer32
Average Pre-FEC BER - provides the mantissa value for Pre-FEC BER expressed in scientific notation -- min in the 15 minute interval
jnxPMIntAvgFECCorrectedErrorsExponent
1.3.6.1.4.1.2636.3.71.1.2.2.1.58
Integer32
Average Pre-FEC BER - provides the negetive exponent value for Pre-FEC BER expressed in scientific notation -- min in the 15 minute interval
jnxPMIntMinFECUCorrectedWordsMantissa
1.3.6.1.4.1.2636.3.71.1.2.2.1.59
Integer32
Minimum Uncorrected BER - provides the mantissa value for Uncorrected BER expressed in scientific notation -- min in the 15 minute interval
jnxPMIntMinFECUCorrectedWordsExponent
1.3.6.1.4.1.2636.3.71.1.2.2.1.60
Integer32
Minimum Uncorrected BER - provides the negetive exponent value for Uncorrected BER expressed in scientific notation -- min in the 15 minute interval
jnxPMIntMaxFECUCorrectedWordsMantissa
1.3.6.1.4.1.2636.3.71.1.2.2.1.61
Integer32
Maximum Uncorrected BER - provides the mantissa value for Uncorrected BER expressed in scientific notation -- min in the 15 minute interval
jnxPMIntMaxFECUCorrectedWordsExponent
1.3.6.1.4.1.2636.3.71.1.2.2.1.62
Integer32
Maximum Uncorrected BER - provides the negetive exponent value for Uncorrected BER expressed in scientific notation -- min in the 15 minute interval
jnxPMIntAvgFECUCorrectedWordsMantissa
1.3.6.1.4.1.2636.3.71.1.2.2.1.63
Integer32
Average Uncorrected BER - provides the mantissa value for Uncorrected BER expressed in scientific notation -- min in the 15 minute interval
jnxPMIntAvgFECUCorrectedWordsExponent
1.3.6.1.4.1.2636.3.71.1.2.2.1.64
Integer32
Average Uncorrected BER - provides the negetive exponent value for Uncorrected BER expressed in scientific notation -- min in the 15 minute interval
jnxPMIntMinRxSignalPower
1.3.6.1.4.1.2636.3.71.1.2.2.1.65
Integer32 · 0.01 dbm
Min RxSignalPower - receive signal power
jnxPMIntMaxRxSignalPower
1.3.6.1.4.1.2636.3.71.1.2.2.1.66
Integer32 · 0.01 dbm
Max RxSignalPower - receive signal power
jnxPMIntAvgRxSignalPower
1.3.6.1.4.1.2636.3.71.1.2.2.1.67
Integer32 · 0.01 dbm
Avg RxSignalPower - receive signal power
jnxPMIntMinOSNR
1.3.6.1.4.1.2636.3.71.1.2.2.1.68
Integer32 · 0.1 dB
Min OSNR - optical signal to noise ratio
jnxPMIntMaxOSNR
1.3.6.1.4.1.2636.3.71.1.2.2.1.69
Integer32 · 0.1 dB
Max OSNR - optical signal to noise ratio
jnxPMIntAvgOSNR
1.3.6.1.4.1.2636.3.71.1.2.2.1.70
Integer32 · 0.1 dB
Avg OSNR - optical signal to noise ratio
jnxPMIntMinSOPMD
1.3.6.1.4.1.2636.3.71.1.2.2.1.71
Integer32 · 0.1 ps^2
Min SOPMD - second-order polarization mode dispersion
jnxPMIntMaxSOPMD
1.3.6.1.4.1.2636.3.71.1.2.2.1.72
Integer32 · 0.1 ps^2
Max SOPMD - second-order polarization mode dispersion
jnxPMIntAvgSOPMD
1.3.6.1.4.1.2636.3.71.1.2.2.1.73
Integer32 · 0.1 ps^2
Avg SOPMD - second-order polarization mode dispersion
jnxPMIntMinSupplyVoltage
1.3.6.1.4.1.2636.3.71.1.2.2.1.74
Integer32 · 0.01 V
Minimum Supply Voltage
jnxPMIntMaxSupplyVoltage
1.3.6.1.4.1.2636.3.71.1.2.2.1.75
Integer32 · 0.01 V
Maximum Supply Voltage
jnxPMIntAvgSupplyVoltage
1.3.6.1.4.1.2636.3.71.1.2.2.1.76
Integer32 · 0.01 V
Average Supply Voltage
jnxPMIntMinSOPROC
1.3.6.1.4.1.2636.3.71.1.2.2.1.77
Integer32 · krad/s
Minimum SOPROC - State of Polarisation Rate of Change
jnxPMIntMaxSOPROC
1.3.6.1.4.1.2636.3.71.1.2.2.1.78
Integer32 · krad/s
Maximum SOPROC - State of Polarisation Rate of Change
jnxPMIntAvgSOPROC
1.3.6.1.4.1.2636.3.71.1.2.2.1.79
Integer32 · krad/s
Average SOPROC - State of Polarisation Rate of Change
jnxPMIntMinModulatorBiasXI
1.3.6.1.4.1.2636.3.71.1.2.2.1.80
Integer32 · 0.01 %
Minimum Modulator Bias XI
jnxPMIntMaxModulatorBiasXI
1.3.6.1.4.1.2636.3.71.1.2.2.1.81
Integer32 · 0.01 %
Maximum Modulator Bias XI
jnxPMIntAvgModulatorBiasXI
1.3.6.1.4.1.2636.3.71.1.2.2.1.82
Integer32 · 0.01 %
Average Modulator Bias XI
jnxPMIntMinModulatorBiasXQ
1.3.6.1.4.1.2636.3.71.1.2.2.1.83
Integer32 · 0.01 %
Minimum Modulator Bias XQ
jnxPMIntMaxModulatorBiasXQ
1.3.6.1.4.1.2636.3.71.1.2.2.1.84
Integer32 · 0.01 %
Maximum Modulator Bias XQ
jnxPMIntAvgModulatorBiasXQ
1.3.6.1.4.1.2636.3.71.1.2.2.1.85
Integer32 · 0.01 %
Average Modulator Bias XQ
jnxPMIntMinModulatorBiasYI
1.3.6.1.4.1.2636.3.71.1.2.2.1.86
Integer32 · 0.01 %
Minimum Modulator Bias YI
jnxPMIntMaxModulatorBiasYI
1.3.6.1.4.1.2636.3.71.1.2.2.1.87
Integer32 · 0.01 %
Maximum Modulator Bias YI
jnxPMIntAvgModulatorBiasYI
1.3.6.1.4.1.2636.3.71.1.2.2.1.88
Integer32 · 0.01 %
Average Modulator Bias YI
jnxPMIntMinModulatorBiasYQ
1.3.6.1.4.1.2636.3.71.1.2.2.1.89
Integer32 · 0.01 %
Minimum Modulator Bias YQ
jnxPMIntMaxModulatorBiasYQ
1.3.6.1.4.1.2636.3.71.1.2.2.1.90
Integer32 · 0.01 %
Maximum Modulator Bias YQ
jnxPMIntAvgModulatorBiasYQ
1.3.6.1.4.1.2636.3.71.1.2.2.1.91
Integer32 · 0.01 %
Average Modulator Bias YQ
jnxPMIntMinModulatorBiasXPhase
1.3.6.1.4.1.2636.3.71.1.2.2.1.92
Integer32 · 0.01 %
Minimum Modulator Bias XPhase
jnxPMIntMaxModulatorBiasXPhase
1.3.6.1.4.1.2636.3.71.1.2.2.1.93
Integer32 · 0.01 %
Maximum Modulator Bias XPhase
jnxPMIntAvgModulatorBiasXPhase
1.3.6.1.4.1.2636.3.71.1.2.2.1.94
Integer32 · 0.01 %
Average Modulator Bias XPhase
jnxPMIntMinModulatorBiasYPhase
1.3.6.1.4.1.2636.3.71.1.2.2.1.95
Integer32 · 0.01 %
Minimum Modulator Bias YPhase
jnxPMIntMaxModulatorBiasYPhase
1.3.6.1.4.1.2636.3.71.1.2.2.1.96
Integer32 · 0.01 %
Maximum Modulator Bias YPhase
jnxPMIntAvgModulatorBiasYPhase
1.3.6.1.4.1.2636.3.71.1.2.2.1.97
Integer32 · 0.01 %
Average Modulator Bias YPhase
jnxPMIntMinQMargin
1.3.6.1.4.1.2636.3.71.1.2.2.1.98
Integer32 · 0.1 db
Minimum Q Margin
jnxPMIntMaxQMargin
1.3.6.1.4.1.2636.3.71.1.2.2.1.99
Integer32 · 0.1 db
Maximum Q Margin
jnxPMIntAvgQMargin
1.3.6.1.4.1.2636.3.71.1.2.2.1.100
Integer32 · 0.1 db
Average Q Margin
jnxOpticsPMDayTable
1.3.6.1.4.1.2636.3.71.1.2.3
Index: ifIndex · jnxOpticsPMDayIndex
A table of 24 hour interval PM entries for coherent optics.
from IF-MIB
ifIndex
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
jnxOpticsPMDayIndex
1.3.6.1.4.1.2636.3.71.1.2.3.1.1
Unsigned32 (1..2)
This is 1 - cur day/ 2 - prev day
jnxPMDayMinChromaticDispersion
1.3.6.1.4.1.2636.3.71.1.2.3.1.2
Integer32 · ps/nm
Chromatic Dispersion measured at Rx Transceiver port - min in the day
jnxPMDayMaxChromaticDispersion
1.3.6.1.4.1.2636.3.71.1.2.3.1.3
Integer32 · ps/nm
Chromatic Dispersion measured at Rx Transceiver port - max in the day
jnxPMDayAvgChromaticDispersion
1.3.6.1.4.1.2636.3.71.1.2.3.1.4
Integer32 · ps/nm
Chromatic Dispersion measured at Rx Transceiver port - average in the day
jnxPMDayMinDiffGroupDelay
1.3.6.1.4.1.2636.3.71.1.2.3.1.5
Integer32 · ps
Differential Group Delay measured at Rx Transceiver port -- min in the day
jnxPMDayMaxDiffGroupDelay
1.3.6.1.4.1.2636.3.71.1.2.3.1.6
Integer32 · ps
Differential Group Delay measured at Rx Transceiver port -- max in the day
jnxPMDayAvgDiffGroupDelay
1.3.6.1.4.1.2636.3.71.1.2.3.1.7
Integer32 · ps
Differential Group Delay measured at Rx Transceiver port -- average in the day
jnxPMDayMinPolarState
1.3.6.1.4.1.2636.3.71.1.2.3.1.8
Integer32 · rad/s
Polarization state -- min in the day
jnxPMDayMaxPolarState
1.3.6.1.4.1.2636.3.71.1.2.3.1.9
Integer32 · rad/s
Polarization state -- max in the day
jnxPMDayAvgPolarState
1.3.6.1.4.1.2636.3.71.1.2.3.1.10
Integer32 · rad/s
Polarization state -- average in the day
jnxPMDayMinPolarDependentLoss
1.3.6.1.4.1.2636.3.71.1.2.3.1.11
Integer32 · 0.1 dB
Polarization Dependent Loss -- min in the day
jnxPMDayMaxPolarDependentLoss
1.3.6.1.4.1.2636.3.71.1.2.3.1.12
Integer32 · 0.1 dB
Polarization Dependent Loss -- max in the day
jnxPMDayAvgPolarDependentLoss
1.3.6.1.4.1.2636.3.71.1.2.3.1.13
Integer32 · 0.1 dB
Polarization Dependent Loss -- average in the day interval
jnxPMDayMinQ
1.3.6.1.4.1.2636.3.71.1.2.3.1.14
Integer32 · 0.1 dB
Q -- min in the day
jnxPMDayMaxQ
1.3.6.1.4.1.2636.3.71.1.2.3.1.15
Integer32 · 0.1 dB
Q -- max in the day
jnxPMDayAvgQ
1.3.6.1.4.1.2636.3.71.1.2.3.1.16
Integer32 · 0.1 dB
Q -- Avg in the day
jnxPMDayMinSNR
1.3.6.1.4.1.2636.3.71.1.2.3.1.17
Integer32 · 0.1 dB
SNR -- min in the day
jnxPMDayMaxSNR
1.3.6.1.4.1.2636.3.71.1.2.3.1.18
Integer32 · 0.1 dB
SNR -- max in the day
jnxPMDayAvgSNR
1.3.6.1.4.1.2636.3.71.1.2.3.1.19
Integer32 · 0.1 dB
SNR -- avg in the day
jnxPMDayMinTxOutputPower
1.3.6.1.4.1.2636.3.71.1.2.3.1.20
Integer32 · 0.01 dbm
TxOutputPower -- min in the day
jnxPMDayMaxTxOutputPower
1.3.6.1.4.1.2636.3.71.1.2.3.1.21
Integer32 · 0.01 dbm
TxOutputPower -- max in the day.
jnxPMDayAvgTxOutputPower
1.3.6.1.4.1.2636.3.71.1.2.3.1.22
Integer32 · 0.01 dbm
TxOutputPower -- average in the day.
jnxPMDayMinRxInputPower
1.3.6.1.4.1.2636.3.71.1.2.3.1.23
Integer32 · 0.01 dbm
RxInputPower -- min in the day.
jnxPMDayMaxRxInputPower
1.3.6.1.4.1.2636.3.71.1.2.3.1.24
Integer32 · 0.01 dbm
RxInputPower -- max in the day.
jnxPMDayAvgRxInputPower
1.3.6.1.4.1.2636.3.71.1.2.3.1.25
Integer32 · 0.01 dbm
RxInputPower -- average in the day.
jnxPMDayTimeStamp
1.3.6.1.4.1.2636.3.71.1.2.3.1.26
DateAndTimeA date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC* 0..13 10 11 minutes from UTC 0..59 * Notes: - the value of year is in network-byte order - daylight saving time in New Zealand is +13 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 Note that if only local time is known, then timezone information (fields 8-10) is not present. SIZE (8 | 11) · OCTET STRING · hint 2d-1d-1d,1d:1d:1d.1d,1a1d:1d
Time for the Day.
jnxPMDaySuspectedFlag
1.3.6.1.4.1.2636.3.71.1.2.3.1.27
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
If true, the data in this entry may be unreliable.
jnxPMDaySuspectReason
1.3.6.1.4.1.2636.3.71.1.2.3.1.28
JnxOpticsSuspectReason0 = notApplicable1 = unknown2 = newObject3 = interfaceDisabled4 = clockShiftDetected5 = userCleared6 = insufficientSampling7 = missingSubIntervals8 = monitoringDisruption9 = dataNotAvailableReason for why PM bin validity is suspect · Integer32
If jnxPMDaySuspectedFlag is true, provides the reason.
jnxPMDayMinTxLaserBiasCurrent
1.3.6.1.4.1.2636.3.71.1.2.3.1.29
Integer32 · .1 mA
Transmit LaserBiasCurrent measured at Transceiver port
jnxPMDayMaxTxLaserBiasCurrent
1.3.6.1.4.1.2636.3.71.1.2.3.1.30
Integer32 · .1 mA
Transmit Minimum LaserBiasCurrent measured at Transceiver port
jnxPMDayAvgTxLaserBiasCurrent
1.3.6.1.4.1.2636.3.71.1.2.3.1.31
Integer32 · .1 mA
Transmit Maximum LaserBiasCurrent measured at Transceiver port
jnxPMDayMinTemperature
1.3.6.1.4.1.2636.3.71.1.2.3.1.32
Integer32 · .1 Celcius
Minimum Module Temperature
jnxPMDayMaxTemperature
1.3.6.1.4.1.2636.3.71.1.2.3.1.33
Integer32 · .1 Celcius
Maximum Module Temperature
jnxPMDayAvgTemperature
1.3.6.1.4.1.2636.3.71.1.2.3.1.34
Integer32 · .1 Celcius
Average Module Temperature
jnxPMDayMinCarFreqOffset
1.3.6.1.4.1.2636.3.71.1.2.3.1.35
Integer32 · Mhz
Minimum Carrier frequency offset measured at Transceiver port
jnxPMDayMaxCarFreqOffset
1.3.6.1.4.1.2636.3.71.1.2.3.1.36
Integer32 · MHz
Maximum Carrier frequency offset measured at Transceiver port
jnxPMDayAvgCarFreqOffset
1.3.6.1.4.1.2636.3.71.1.2.3.1.37
Integer32 · MHz
Average Carrier frequency offset measured at Transceiver port
jnxPMDayMinRxLaserBiasCurrent
1.3.6.1.4.1.2636.3.71.1.2.3.1.38
Integer32 · .1 mA
Receive LaserBiasCurrent measured at Transceiver port
jnxPMDayMaxRxLaserBiasCurrent
1.3.6.1.4.1.2636.3.71.1.2.3.1.39
Integer32 · .1 mA
Receive Minimum LaserBiasCurrent measured at Transceiver port
jnxPMDayAvgRxLaserBiasCurrent
1.3.6.1.4.1.2636.3.71.1.2.3.1.40
Integer32 · .1 mA
Receive Maximum LaserBiasCurrent measured at Transceiver port
jnxPMDayMinTecCurrent
1.3.6.1.4.1.2636.3.71.1.2.3.1.41
Integer32 · .1 mA
Received Minimum TecCurrent measured at Transceiver port
jnxPMDayMaxTecCurrent
1.3.6.1.4.1.2636.3.71.1.2.3.1.42
Integer32 · .1 mA
Received Maximum TecCurrent measured at Transceiver port
jnxPMDayAvgTecCurrent
1.3.6.1.4.1.2636.3.71.1.2.3.1.43
Integer32 · .1 mA
Received Average TecCurrent measured at Transceiver port
jnxPMDayMinResidualDispersion
1.3.6.1.4.1.2636.3.71.1.2.3.1.44
Integer32 · ps/nm
Minimum Residual Dispersion measured at Transceiver port
jnxPMDayMaxResidualDispersion
1.3.6.1.4.1.2636.3.71.1.2.3.1.45
Integer32 · ps/nm
Maximum Residual Dispersion measured at Transceiver port
jnxPMDayAvgResidualDispersion
1.3.6.1.4.1.2636.3.71.1.2.3.1.46
Integer32 · ps/nm
Average Residual Dispersion measured at Transceiver port
jnxPMDayMinLevelHistogram
1.3.6.1.4.1.2636.3.71.1.2.3.1.47
Integer32
The Minimum rate of measured signal at Transceiver port
jnxPMDayMaxLevelHistogram
1.3.6.1.4.1.2636.3.71.1.2.3.1.48
Integer32
The Maximum rate of measured signal at Transceiver port
jnxPMDayAvgLevelHistogram
1.3.6.1.4.1.2636.3.71.1.2.3.1.49
Integer32
The Average rate of measured signal at Transceiver port
jnxPMDayMinLaserFrequencyError
1.3.6.1.4.1.2636.3.71.1.2.3.1.50
Integer32 · .1 Celcius
Minimum Laser Frequency Error measured at Transceiver port
jnxPMDayMaxLaserFrequencyError
1.3.6.1.4.1.2636.3.71.1.2.3.1.51
Integer32 · .1 Celcius
Maximum Laser Frequency Error measured at Transceiver port
jnxPMDayAvgLaserFrequencyError
1.3.6.1.4.1.2636.3.71.1.2.3.1.52
Integer32 · .1 Celcius
Average Laser Frequency Error measured at Transceiver port
jnxPMDayMinFECCorrectedErrorsMantissa
1.3.6.1.4.1.2636.3.71.1.2.3.1.53
Integer32
Minimum Pre-FEC BER - provides the mantissa value for Pre-FEC BER expressed in scientific notation
jnxPMDayMinFECCorrectedErrorsExponent
1.3.6.1.4.1.2636.3.71.1.2.3.1.54
Integer32
Minimum Pre-FEC BER - provides the negetive exponent value for Pre-FEC BER expressed in scientific notation
jnxPMDayMaxFECCorrectedErrorsMantissa
1.3.6.1.4.1.2636.3.71.1.2.3.1.55
Integer32
Maximum Pre-FEC BER - provides the mantissa value for Pre-FEC BER expressed in scientific notation
jnxPMDayMaxFECCorrectedErrorsExponent
1.3.6.1.4.1.2636.3.71.1.2.3.1.56
Integer32
Maximum Pre-FEC BER - provides the negetive exponent value for Pre-FEC BER expressed in scientific notation
jnxPMDayAvgFECCorrectedErrorsMantissa
1.3.6.1.4.1.2636.3.71.1.2.3.1.57
Integer32
Average Pre-FEC BER - provides the mantissa value for Pre-FEC BER expressed in scientific notation
jnxPMDayAvgFECCorrectedErrorsExponent
1.3.6.1.4.1.2636.3.71.1.2.3.1.58
Integer32
Average Pre-FEC BER - provides the negetive exponent value for Pre-FEC BER expressed in scientific notation
jnxPMDayMinFECUCorrectedWordsMantissa
1.3.6.1.4.1.2636.3.71.1.2.3.1.59
Integer32
Minimum Uncorrected BER - provides the mantissa value for Pre-FEC BER expressed in scientific notation
jnxPMDayMinFECUCorrectedWordsExponent
1.3.6.1.4.1.2636.3.71.1.2.3.1.60
Integer32
Minimum Uncorrected BER - provides the negetive exponent value for Pre-FEC BER expressed in scientific notation
jnxPMDayMaxFECUCorrectedWordsMantissa
1.3.6.1.4.1.2636.3.71.1.2.3.1.61
Integer32
Maximum Uncorrected BER - provides the mantissa value for Pre-FEC BER expressed in scientific notation
jnxPMDayMaxFECUCorrectedWordsExponent
1.3.6.1.4.1.2636.3.71.1.2.3.1.62
Integer32
Maximum Uncorrected BER - provides the negetive exponent value for Pre-FEC BER expressed in scientific notation
jnxPMDayAvgFECUCorrectedWordsMantissa
1.3.6.1.4.1.2636.3.71.1.2.3.1.63
Integer32
Average Uncorrected BER - provides the mantissa value for Pre-FEC BER expressed in scientific notation
jnxPMDayAvgFECUCorrectedWordsExponent
1.3.6.1.4.1.2636.3.71.1.2.3.1.64
Integer32
Average Uncorrected BER - provides the negetive exponent value for Pre-FEC BER expressed in scientific notation
jnxPMDayMinRxSignalPower
1.3.6.1.4.1.2636.3.71.1.2.3.1.65
Integer32 · 0.01 dbm
Min RxSignalPower - receive signal power
jnxPMDAyMaxRxSignalPower
1.3.6.1.4.1.2636.3.71.1.2.3.1.66
Integer32 · 0.01 dbm
Max RxSignalPower - receive signal power
jnxPMDAyAvgRxSignalPower
1.3.6.1.4.1.2636.3.71.1.2.3.1.67
Integer32 · 0.01 dbm
Avg RxSignalPower - receive signal power
jnxPMDayMinOSNR
1.3.6.1.4.1.2636.3.71.1.2.3.1.68
Integer32 · 0.1 dB
Min OSNR - optical signal to noise ratio
jnxPMDayMaxOSNR
1.3.6.1.4.1.2636.3.71.1.2.3.1.69
Integer32 · 0.1 dB
Max OSNR - optical signal to noise ratio
jnxPMDayAvgOSNR
1.3.6.1.4.1.2636.3.71.1.2.3.1.70
Integer32 · 0.1 dB
Avg OSNR - optical signal to noise ratio
jnxPMDayMinSOPMD
1.3.6.1.4.1.2636.3.71.1.2.3.1.71
Integer32 · 0.1 ps^2
Min SOPMD - second-order polarization mode dispersion
jnxPMDayMaxSOPMD
1.3.6.1.4.1.2636.3.71.1.2.3.1.72
Integer32 · 0.1 ps^2
Max SOPMD - second-order polarization mode dispersion
jnxPMDayAvgSOPMD
1.3.6.1.4.1.2636.3.71.1.2.3.1.73
Integer32 · 0.1 ps^2
Avg SOPMD - second-order polarization mode dispersion
jnxPMDayMinSupplyVoltage
1.3.6.1.4.1.2636.3.71.1.2.3.1.74
Integer32 · 0.01 V
Minimum Supply Voltage
jnxPMDayMaxSupplyVoltage
1.3.6.1.4.1.2636.3.71.1.2.3.1.75
Integer32 · 0.01 V
Maximum Supply Voltage
jnxPMDayAvgSupplyVoltage
1.3.6.1.4.1.2636.3.71.1.2.3.1.76
Integer32 · 0.01 V
Average Supply Voltage
jnxPMDayMinSOPROC
1.3.6.1.4.1.2636.3.71.1.2.3.1.77
Integer32 · krad/s
Minmum SOPROC - State of Polarisation Rate of Change
jnxPMDayMaxSOPROC
1.3.6.1.4.1.2636.3.71.1.2.3.1.78
Integer32 · krad/s
Maximum SOPROC - State of Polarisation Rate of Change
jnxPMDayAvgSOPROC
1.3.6.1.4.1.2636.3.71.1.2.3.1.79
Integer32 · krad/s
Average SOPROC - State of Polarisation Rate of Change
jnxPMDayMinModulatorBiasXI
1.3.6.1.4.1.2636.3.71.1.2.3.1.80
Integer32 · 0.01 %
Minimum Modulator Bias XI
jnxPMDayMaxModulatorBiasXI
1.3.6.1.4.1.2636.3.71.1.2.3.1.81
Integer32 · 0.01 %
Maximum Modulator Bias XI
jnxPMDayAvgModulatorBiasXI
1.3.6.1.4.1.2636.3.71.1.2.3.1.82
Integer32 · 0.01 %
Average Modulator Bias XI
jnxPMDayMinModulatorBiasXQ
1.3.6.1.4.1.2636.3.71.1.2.3.1.83
Integer32 · 0.01 %
Minimum Modulator Bias XQ
jnxPMDayMaxModulatorBiasXQ
1.3.6.1.4.1.2636.3.71.1.2.3.1.84
Integer32 · 0.01 %
Maximum Modulator Bias XQ
jnxPMDayAvgModulatorBiasXQ
1.3.6.1.4.1.2636.3.71.1.2.3.1.85
Integer32 · 0.01 %
Average Modulator Bias XQ
jnxPMDayMinModulatorBiasYI
1.3.6.1.4.1.2636.3.71.1.2.3.1.86
Integer32 · 0.01 %
Minimum Modulator Bias YI
jnxPMDayMaxModulatorBiasYI
1.3.6.1.4.1.2636.3.71.1.2.3.1.87
Integer32 · 0.01 %
Maximum Modulator Bias YI
jnxPMDayAvgModulatorBiasYI
1.3.6.1.4.1.2636.3.71.1.2.3.1.88
Integer32 · 0.01 %
Average Modulator Bias YI
jnxPMDayMinModulatorBiasYQ
1.3.6.1.4.1.2636.3.71.1.2.3.1.89
Integer32 · 0.01 %
Minimum Modulator Bias YQ
jnxPMDayMaxModulatorBiasYQ
1.3.6.1.4.1.2636.3.71.1.2.3.1.90
Integer32 · 0.01 %
Maximum Modulator Bias YQ
jnxPMDayAvgModulatorBiasYQ
1.3.6.1.4.1.2636.3.71.1.2.3.1.91
Integer32 · 0.01 %
Average Modulator Bias YQ
jnxPMDayMinModulatorBiasXPhase
1.3.6.1.4.1.2636.3.71.1.2.3.1.92
Integer32 · 0.01 %
Minimum Modulator Bias XPhase
jnxPMDayMaxModulatorBiasXPhase
1.3.6.1.4.1.2636.3.71.1.2.3.1.93
Integer32 · 0.01 %
Maximum Modulator Bias XPhase
jnxPMDayAvgModulatorBiasXPhase
1.3.6.1.4.1.2636.3.71.1.2.3.1.94
Integer32 · 0.01 %
Average Modulator Bias XPhase
jnxPMDayMinModulatorBiasYPhase
1.3.6.1.4.1.2636.3.71.1.2.3.1.95
Integer32 · 0.01 %
Minimum Modulator Bias YPhase
jnxPMDayMaxModulatorBiasYPhase
1.3.6.1.4.1.2636.3.71.1.2.3.1.96
Integer32 · 0.01 %
Maximum Modulator Bias YPhase
jnxPMDayAvgModulatorBiasYPhase
1.3.6.1.4.1.2636.3.71.1.2.3.1.97
Integer32 · 0.01 %
Average Modulator Bias YPhase
jnxPMDayMinQMargin
1.3.6.1.4.1.2636.3.71.1.2.3.1.98
Integer32 · 0.1 db
Minimum Q Margin
jnxPMDayMaxQMargin
1.3.6.1.4.1.2636.3.71.1.2.3.1.99
Integer32 · 0.1 db
Maximum Q Margin
jnxPMDayAvgQMargin
1.3.6.1.4.1.2636.3.71.1.2.3.1.100
Integer32 · 0.1 db
Average Q Margin
jnxOpticsOTIfPMFECCurrentTable
1.3.6.1.4.1.2636.3.71.1.2.4
Index: ifIndex
A Performance monitoring FEC Current Table.
from IF-MIB
ifIndex
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
jnxOpticsOTIfPMFECCurrentSuspectedFlag
1.3.6.1.4.1.2636.3.71.1.2.4.1.1
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
If true, the data in this entry may be unreliable.
jnxOpticsOTIfPMCurrentFECCorrectedErr
1.3.6.1.4.1.2636.3.71.1.2.4.1.2
Counter64 (0..18446744073709551615)
The number of bits corrected by the FEC are counted in the interval.
jnxOpticsOTIfPMCurrentFECUncorrectedWords
1.3.6.1.4.1.2636.3.71.1.2.4.1.3
Counter64 (0..18446744073709551615)
The number of un-corrected words by the FEC are counted over the interval.
jnxOpticsOTIfPMCurrentFECBERMantissa
1.3.6.1.4.1.2636.3.71.1.2.4.1.4
Unsigned32
The number of Errored bits at receiving side before the FEC function counted over one second .. mantissa.
jnxOpticsOTIfPMCurrentFECBERExponent
1.3.6.1.4.1.2636.3.71.1.2.4.1.5
Unsigned32
The number of Errored bits at receiving side before the FEC function counted over one second .. exponent (eg -1).
jnxOpticsOTIfPMCurrentFECMinBERMantissa
1.3.6.1.4.1.2636.3.71.1.2.4.1.6
Unsigned32
The minimum number of Errored bits at receiving side before the FEC function counted over one second .. mantissa.
jnxOpticsOTIfPMCurrentFECMinBERExponent
1.3.6.1.4.1.2636.3.71.1.2.4.1.7
Unsigned32
The minimum number of Errored bits at receiving side before the FEC function counted over one second .. exponent (eg -1).
jnxOpticsOTIfPMCurrentFECMaxBERMantissa
1.3.6.1.4.1.2636.3.71.1.2.4.1.8
Unsigned32
The maximum number of Errored bits at receiving side before the FEC function counted over one second .. mantissa.
jnxOpticsOTIfPMCurrentFECMaxBERExponent
1.3.6.1.4.1.2636.3.71.1.2.4.1.9
Unsigned32
The maximum number of Errored bits at receiving side before the FEC function counted over one second .. exponent (eg -1).
jnxOpticsOTIfPMCurrentFECAvgBERMantissa
1.3.6.1.4.1.2636.3.71.1.2.4.1.10
Unsigned32
The average number of Errored bits at receiving side before the FEC function counted over one second .. mantissa.
jnxOpticsOTIfPMCurrentFECAvgBERExponent
1.3.6.1.4.1.2636.3.71.1.2.4.1.11
Unsigned32
The average number of Errored bits at receiving side before the FEC function counted over one second .. exponent (eg -1).
jnxOpticsOTIfPMCurrentFECElapsedTime
1.3.6.1.4.1.2636.3.71.1.2.4.1.12
Unsigned32 · seconds
Time elapsed for this 15 minute interval.
jnxOpticsOTIfPMFECCurSuspectReason
1.3.6.1.4.1.2636.3.71.1.2.4.1.13
Integer32
If SuspectedFlag is true, the reson for the PM data being suspect. 0 - not applicable 1 - unknown 2 - new object 3 - interface disabled 4 - clock shift detected 5 - cleared by user 6 - interval too short secs < 890 7 - interval too long secs > 910 8 - near end unavailable 9 - far end unavailable 10 - partial data 11 - missing intervals due to restarts
jnxOpticsOTIfPMFECIntervalTable
1.3.6.1.4.1.2636.3.71.1.2.5
Index: ifIndex · jnxOpticsOTIfPMFECIntervalNumber
A Performance monitoring FEC Interval Table.
from IF-MIB
ifIndex
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
jnxOpticsOTIfPMFECIntervalNumber
1.3.6.1.4.1.2636.3.71.1.2.5.1.1
Unsigned32
A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 1.
jnxOpticsOTIfPMFECIntervalSuspectedFlag
1.3.6.1.4.1.2636.3.71.1.2.5.1.2
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
If true, the data in this entry may be unreliable.
jnxOpticsOTIfPMIntervalFECCorrectedErr
1.3.6.1.4.1.2636.3.71.1.2.5.1.3
Counter64 (0..18446744073709551615)
The number of bits corrected by the FEC are counted in the interval.
jnxOpticsOTIfPMIntervalFECUncorrectedWords
1.3.6.1.4.1.2636.3.71.1.2.5.1.4
Counter64 (0..18446744073709551615)
The number of words un-corrected words by the FEC are counted over the interval.
jnxOpticsOTIfPMIntervalMinFECBERMantissa
1.3.6.1.4.1.2636.3.71.1.2.5.1.5
Unsigned32
The minimun bit error rate at receiving side before the FEC function counted over one second .. mantissa. This is the minimum Pre FEC BER in the current 24hour period.
jnxOpticsOTIfPMIntervalMinFECBERExponent
1.3.6.1.4.1.2636.3.71.1.2.5.1.6
Unsigned32
The minimun bit error rate at receiving side before the FEC function counted over one second .. exponent. This is the minimum Pre FEC BER in the current 24hour period.
jnxOpticsOTIfPMIntervalMaxFECBERMantissa
1.3.6.1.4.1.2636.3.71.1.2.5.1.7
Unsigned32
The maximun bit error rate at receiving side before the FEC function counted over one second .. mantissa. This is the maximum Pre FEC BER in the current 24hour period.
jnxOpticsOTIfPMIntervalMaxFECBERExponent
1.3.6.1.4.1.2636.3.71.1.2.5.1.8
Unsigned32
The maximun bit error rate at receiving side before the FEC function counted over one second .. exponent. This is the maximum Pre FEC BER in the current 24hour period.
jnxOpticsOTIfPMIntervalAvgFECBERMantissa
1.3.6.1.4.1.2636.3.71.1.2.5.1.9
Unsigned32
The average bit error rate at receiving side before the FEC function counted over one second .. mantissa. This is the average Pre FEC BER in the current 24hour period.
jnxOpticsOTIfPMIntervalAvgFECBERExponent
1.3.6.1.4.1.2636.3.71.1.2.5.1.10
Unsigned32
The average bit error rate at receiving side before the FEC function counted over one second .. exponent. This is the average Pre FEC BER in the current 24hour period.
jnxOpticsOTIfPMFECIntervalTimeStamp
1.3.6.1.4.1.2636.3.71.1.2.5.1.11
DateAndTimeA date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC* 0..13 10 11 minutes from UTC 0..59 * Notes: - the value of year is in network-byte order - daylight saving time in New Zealand is +13 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 Note that if only local time is known, then timezone information (fields 8-10) is not present. SIZE (8 | 11) · OCTET STRING · hint 2d-1d-1d,1d:1d:1d.1d,1a1d:1d
Time stamp of this interval.
jnxOpticsOTIfPMFECIntSuspectReason
1.3.6.1.4.1.2636.3.71.1.2.5.1.12
Integer32
If SuspectedFlag is true, the reson for the PM data being suspect. 0 - not applicable 1 - unknown 2 - new object 3 - interface disabled 4 - clock shift detected 5 - cleared by user 6 - interval too short secs < 890 7 - interval too long secs > 910 8 - near end unavailable 9 - far end unavailable 10 - partial data 11 - missing intervals due to restarts
jnxOpticsOTIfPMFECCurrentDayTable
1.3.6.1.4.1.2636.3.71.1.2.6
Index: ifIndex
A Performance monitoring FEC current day table.
from IF-MIB
ifIndex
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
jnxOpticsOTIfPMFECCurrentDaySuspectedFlag
1.3.6.1.4.1.2636.3.71.1.2.6.1.1
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
If true, the data in this entry may be unreliable.
jnxOpticsOTIfPMCurrentDayFECCorrectedErr
1.3.6.1.4.1.2636.3.71.1.2.6.1.2
Counter64 (0..18446744073709551615)
The number of bits corrected by the FEC are counted in the interval.
jnxOpticsOTIfPMCurrentDayFECUncorrectedWords
1.3.6.1.4.1.2636.3.71.1.2.6.1.3
Counter64 (0..18446744073709551615)
The number of words un-corrected by the FEC are counted over the Day.
jnxOpticsOTIfPMCurrentDayMinFECBERMantissa
1.3.6.1.4.1.2636.3.71.1.2.6.1.4
Unsigned32
The minimun bit error rate at receiving side before the FEC function counted over one second .. mantissa. This is the minimum PreFEC BER in the current 24hour period.
jnxOpticsOTIfPMCurrentDayMinFECBERExponent
1.3.6.1.4.1.2636.3.71.1.2.6.1.5
Unsigned32
The minimun bit error rate at receiving side before the FEC function counted over one second .. exponent. This is the minimum PreFEC BER in the current 24hour period.
jnxOpticsOTIfPMCurrentDayMaxFECBERMantissa
1.3.6.1.4.1.2636.3.71.1.2.6.1.6
Unsigned32
The maximun bit error rate at receiving side before the FEC function counted over one second .. mantissa. This is the maximum PreFEC BER in the current 24hour period.
jnxOpticsOTIfPMCurrentDayMaxFECBERExponent
1.3.6.1.4.1.2636.3.71.1.2.6.1.7
Unsigned32
The maximun bit error rate at receiving side before the FEC function counted over one second .. exponent. This is the maximum PreFEC BER in the current 24hour period.
jnxOpticsOTIfPMCurrentDayAvgFECBERMantissa
1.3.6.1.4.1.2636.3.71.1.2.6.1.8
Unsigned32
The average bit error rate at receiving side before the FEC function counted over one second .. mantissa. This is the average PreFEC BER in the current 24hour period.
jnxOpticsOTIfPMCurrentDayAvgFECBERExponent
1.3.6.1.4.1.2636.3.71.1.2.6.1.9
Unsigned32
The average bit error rate at receiving side before the FEC function counted over one second .. exponent. This is the average PreFEC BER in the current 24hour period.
jnxOpticsOTIfPMFECCurrentDayElapsedTime
1.3.6.1.4.1.2636.3.71.1.2.6.1.10
Unsigned32 · seconds
Time elapsed for current day.
jnxOpticsOTIfPMFECCurDaySuspectReason
1.3.6.1.4.1.2636.3.71.1.2.6.1.11
Integer32
If SuspectedFlag is true, the reson for the PM data being suspect. 0 - not applicable 1 - unknown 2 - new object 3 - clock shift detected 4 - cleared by user 5 - partial data 6 - missing intervals due to restarts 7 - one or more intervals are invaild
jnxOpticsOTIfPMFECPrevDayTable
1.3.6.1.4.1.2636.3.71.1.2.7
Index: ifIndex
A Performance monitoring FEC previous day table.
from IF-MIB
ifIndex
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
jnxOpticsOTIfPMFECPrevDaySuspectedFlag
1.3.6.1.4.1.2636.3.71.1.2.7.1.1
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
If true, the data in this entry may be unreliable.
jnxOpticsOTIfPMPrevDayFECCorrectedErr
1.3.6.1.4.1.2636.3.71.1.2.7.1.2
Counter64 (0..18446744073709551615)
The number of bits corrected by the FEC are counted in the previous day.
jnxOpticsOTIfPMPrevDayFECUncorrectedWords
1.3.6.1.4.1.2636.3.71.1.2.7.1.3
Counter64 (0..18446744073709551615)
The number of un-corrected words by the FEC are counted over the previous Day.
jnxOpticsOTIfPMPrevDayMinFECBERMantissa
1.3.6.1.4.1.2636.3.71.1.2.7.1.4
Unsigned32
The maximun bit error rate at receiving side before the FEC function counted over one second .. mantissa. This is the maximum Pre FEC BER in the previous 24hour period.
jnxOpticsOTIfPMPrevDayMinFECBERExponent
1.3.6.1.4.1.2636.3.71.1.2.7.1.5
Unsigned32
The minimun bit error rate at receiving side before the FEC function counted over one second .. exponent. This is the maximum Pre FEC BER in the previous 24hour period.
jnxOpticsOTIfPMPrevDayMaxFECBERMantissa
1.3.6.1.4.1.2636.3.71.1.2.7.1.6
Unsigned32
The maximun bit error rate at receiving side before the FEC function counted over one second .. mantissa. This is the maximum Pre FEC BER in the previous 24hour period (mantissa).
jnxOpticsOTIfPMPrevDayMaxFECBERExponent
1.3.6.1.4.1.2636.3.71.1.2.7.1.7
Unsigned32
The maximun bit error rate at receiving side before the FEC function counted over one second .. exponent (eg -3). This is the maximum Pre FEC BER in the previous 24hour period.
jnxOpticsOTIfPMPrevDayAvgFECBERMantissa
1.3.6.1.4.1.2636.3.71.1.2.7.1.8
Unsigned32
The average bit error rate at receiving side before the FEC function counted over one second .. mantissa. This is the average Pre FEC BER during the previous 24hour period (mantissa).
jnxOpticsOTIfPMPrevDayAvgFECBERExponent
1.3.6.1.4.1.2636.3.71.1.2.7.1.9
Unsigned32
The average bit error rate at receiving side before the FEC function counted over one second .. exponent (eg -3). This is the average Pre FEC BER during the previous 24hour period.
jnxOpticsOTIfPMFECPrevDayTimeStamp
1.3.6.1.4.1.2636.3.71.1.2.7.1.10
DateAndTimeA date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC* 0..13 10 11 minutes from UTC 0..59 * Notes: - the value of year is in network-byte order - daylight saving time in New Zealand is +13 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 Note that if only local time is known, then timezone information (fields 8-10) is not present. SIZE (8 | 11) · OCTET STRING · hint 2d-1d-1d,1d:1d:1d.1d,1a1d:1d
Time stamp for the Prev day.
jnxOpticsOTIfPMFECPrevDaySuspectReason
1.3.6.1.4.1.2636.3.71.1.2.7.1.11
Integer32
If SuspectedFlag is true, the reson for the PM data being suspect. 0 - not applicable 1 - unknown 2 - new object 3 - clock shift detected 4 - cleared by user 5 - partial data 6 - missing intervals due to restarts 7 - one or more intervals are invaild
jnxOpticsOTIfPMFECConfigTable
1.3.6.1.4.1.2636.3.71.1.2.8
Index: ifIndex
A table of current PM entries.
from IF-MIB
ifIndex
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
jnxOpticsOTIfPMFECValidIntervals
1.3.6.1.4.1.2636.3.71.1.2.8.1.1
Unsigned32
The number of contiguous 15 minute intervals for which valid FEC PM data is available for the particular interface.
jnxOpticsOTIfPM15MinPreFECBERMantissaThreshold
1.3.6.1.4.1.2636.3.71.1.2.8.1.2
Unsigned32
BER (mantissa) by the interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send jnxOpticsOTIf15MinThreshPreFECBERTCA. One notification will be sent per interval per interface. A value of `0' will disable the notification.
jnxOpticsOTIfPM15MinPreFECBERExponentThreshold
1.3.6.1.4.1.2636.3.71.1.2.8.1.3
Unsigned32
The Pre FEC BER (exponent) by the interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send jnxoptIf15MinThreshPreFECBERTCA. One notification will be sent per interval per interface. A value of `0' will disable the notification.
jnxOpticsOTIfPM24HourPreFECBERMantissaThreshold
1.3.6.1.4.1.2636.3.71.1.2.8.1.4
Unsigned32
BER (mantissa) by the interface within any given 24 Hour performance data collection period, which causes the SNMP agent to send jnxoptIf5s24Hour15MinThreshPreFECBERTCA. One notification will be sent per 24 hour period per interface. A value of `0' will disable the notification.
jnxOpticsOTIfPM24HourPreFECBERExponentThreshold
1.3.6.1.4.1.2636.3.71.1.2.8.1.5
Unsigned32
The Pre FEC BER (exponent) by the interface within any given 24 Hour performance data collection period, which causes the SNMP agent to send jnxoptIf5s24Hour15MinThreshPreFECBERTCA. One notification will be sent per 24 hour period per interface. A value of `0' will disable the notification.
jnxOpticsOTIfPMFECBEREnableTCA
1.3.6.1.4.1.2636.3.71.1.2.8.1.6
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
Enable TCA's - 15minute and 24hr for FEC BER
jnxIfOpticsPMCurrentTable
1.3.6.1.4.1.2636.3.71.1.2.9
Index: ifIndex · jnxIfOpticsPMCurrentLaneIndex
A table of current PM entries.
from IF-MIB
ifIndex
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
jnxIfOpticsPMCurrentLaneIndex
1.3.6.1.4.1.2636.3.71.1.2.9.1.1
Unsigned32 (1..96)
This is the optics lane number.
jnxIfOpticsPMCurChromaticDispersion
1.3.6.1.4.1.2636.3.71.1.2.9.1.2
Integer32 · ps/nm
Residual Chromatic Dispersion measured at Rx Transceiver port
jnxIfOpticsPMCurDiffGroupDelay
1.3.6.1.4.1.2636.3.71.1.2.9.1.3
Integer32 · ps
Differential group delay
jnxIfOpticsPMCurPolarizationState
1.3.6.1.4.1.2636.3.71.1.2.9.1.4
Integer32 · rad/s
Polarization state
jnxIfOpticsPMCurPolarDepLoss
1.3.6.1.4.1.2636.3.71.1.2.9.1.5
Integer32 · 0.1 dB
The polarisation dependent loss (PDL) is the difference (in dB) between the maximum and minimum values of the channel insertion loss (or gain) of the black-link from point SS to RS due to a variation of the state of polarization (SOP) over all SOPs
jnxIfOpticsPMCurQ
1.3.6.1.4.1.2636.3.71.1.2.9.1.6
Integer32 · 0.1 dB
'Q' factor estimated at Rx Transceiver port
jnxIfOpticsPMCurSNR
1.3.6.1.4.1.2636.3.71.1.2.9.1.7
Integer32 · 0.1 dB
SNR - signal to noise ratio
jnxIfOpticsPMCurTxOutputPower
1.3.6.1.4.1.2636.3.71.1.2.9.1.8
Integer32 · 0.01 dbm
TxOutputPower - transmit output power
jnxIfOpticsPMCurRxInputPower
1.3.6.1.4.1.2636.3.71.1.2.9.1.9
Integer32 · 0.01 dbm
RxInputPower - receive output power
jnxIfOpticsPMCurMinChromaticDispersion
1.3.6.1.4.1.2636.3.71.1.2.9.1.10
Integer32 · ps/nm
Min Residual Chromatic Dispersion measured at Rx Transceiver port
jnxIfOpticsPMCurMaxChromaticDispersion
1.3.6.1.4.1.2636.3.71.1.2.9.1.11
Integer32 · ps/nm
Max Residual Chromatic Dispersion measured at Rx Transceiver port
jnxIfOpticsPMCurAvgChromaticDispersion
1.3.6.1.4.1.2636.3.71.1.2.9.1.12
Integer32 · ps/nm
Average Residual Chromatic Dispersion measured at Rx Transceiver port
jnxIfOpticsPMCurMinDiffGroupDelay
1.3.6.1.4.1.2636.3.71.1.2.9.1.13
Integer32 · ps
Min Differential group delay
jnxIfOpticsPMCurMaxDiffGroupDelay
1.3.6.1.4.1.2636.3.71.1.2.9.1.14
Integer32 · ps
Max Differential group delay
jnxIfOpticsPMCurAvgDiffGroupDelay
1.3.6.1.4.1.2636.3.71.1.2.9.1.15
Integer32 · ps
Average Differential group delay
jnxIfOpticsPMCurMinPolarState
1.3.6.1.4.1.2636.3.71.1.2.9.1.16
Integer32 · rad/s
Min Polarization state
jnxIfOpticsPMCurMaxPolarState
1.3.6.1.4.1.2636.3.71.1.2.9.1.17
Integer32 · rad/s
Max Polarization state
jnxIfOpticsPMCurAvgPolarState
1.3.6.1.4.1.2636.3.71.1.2.9.1.18
Integer32 · rad/s
Avg Polarization state
jnxIfOpticsPMCurMinPolarDepLoss
1.3.6.1.4.1.2636.3.71.1.2.9.1.19
Integer32 · 0.1 dB
Min - The polarisation dependent loss (PDL)
jnxIfOpticsPMCurMaxPolarDepLoss
1.3.6.1.4.1.2636.3.71.1.2.9.1.20
Integer32 · 0.1 dB
Max - The polarisation dependent loss (PDL)
jnxIfOpticsPMCurAvgPolarDepLoss
1.3.6.1.4.1.2636.3.71.1.2.9.1.21
Integer32 · 0.1 dB
Avg - The polarisation dependent loss (PDL)
jnxIfOpticsPMCurMinQ
1.3.6.1.4.1.2636.3.71.1.2.9.1.22
Integer32 · 0.1 dB
Min 'Q' factor estimated at Rx Transceiver port
jnxIfOpticsPMCurMaxQ
1.3.6.1.4.1.2636.3.71.1.2.9.1.23
Integer32 · 0.1 dB
Max 'Q' factor estimated at Rx Transceiver port
jnxIfOpticsPMCurAvgQ
1.3.6.1.4.1.2636.3.71.1.2.9.1.24
Integer32 · 0.1 dB
Avg 'Q' factor estimated at Rx Transceiver port
jnxIfOpticsPMCurMinSNR
1.3.6.1.4.1.2636.3.71.1.2.9.1.25
Integer32 · 0.1 dB
Min SNR - signal to noise ratio
jnxIfOpticsPMCurMaxSNR
1.3.6.1.4.1.2636.3.71.1.2.9.1.26
Integer32 · 0.1 dB
Max SNR - signal to noise ratio
jnxIfOpticsPMCurAvgSNR
1.3.6.1.4.1.2636.3.71.1.2.9.1.27
Integer32 · 0.1 dB
Avg SNR - signal to noise ratio
jnxIfOpticsPMCurMinTxOutputPower
1.3.6.1.4.1.2636.3.71.1.2.9.1.28
Integer32 · 0.01 dbm
Min TxOutputPower - transmit output power
jnxIfOpticsPMCurMaxTxOutputPower
1.3.6.1.4.1.2636.3.71.1.2.9.1.29
Integer32 · 0.01 dbm
Max TxOutputPower - transmit output power
jnxIfOpticsPMCurAvgTxOutputPower
1.3.6.1.4.1.2636.3.71.1.2.9.1.30
Integer32 · 0.01 dbm
Avg TxOutputPower - transmit output power
jnxIfOpticsPMCurMinRxInputPower
1.3.6.1.4.1.2636.3.71.1.2.9.1.31
Integer32 · 0.01 dbm
Min RxInputPower - receive output power
jnxIfOpticsPMCurMaxRxInputPower
1.3.6.1.4.1.2636.3.71.1.2.9.1.32
Integer32 · 0.01 dbm
Max RxInputPower - receive output power
jnxIfOpticsPMCurAvgRxInputPower
1.3.6.1.4.1.2636.3.71.1.2.9.1.33
Integer32 · 0.01 dbm
Avg RxInputPower - receive output power
jnxIfOpticsPMCurSuspectedFlag
1.3.6.1.4.1.2636.3.71.1.2.9.1.34
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
If true, the data in this entry may be unreliable.
jnxIfOpticsPMCurSuspectReason
1.3.6.1.4.1.2636.3.71.1.2.9.1.35
Integer32
If SuspectedFlag is true, the reson for the PM data being suspect. 0 - not applicable 1 - unknown 2 - new object 3 - interface disabled 4 - clock shift detected 5 - cleared by user 6 - interval too short secs < 890 7 - interval too long secs > 910 8 - near end unavailable 9 - far end unavailable 10 - partial data 11 - missing intervals due to restarts
jnxIfOpticsPMCurTxLaserBiasCurrent
1.3.6.1.4.1.2636.3.71.1.2.9.1.36
Integer32 · .1 mA
Trasmit LaserBiasCurrent measured at Transceiver port
jnxIfOpticsPMCurMinTxLaserBiasCurrent
1.3.6.1.4.1.2636.3.71.1.2.9.1.37
Integer32 · .1 mA
Minimum trasmit LaserBiasCurrent measured at Transceiver port
jnxIfOpticsPMCurMaxTxLaserBiasCurrent
1.3.6.1.4.1.2636.3.71.1.2.9.1.38
Integer32 · .1 mA
Maximum trasmit LaserBiasCurrent measured at Transceiver port
jnxIfOpticsPMCurAvgTxLaserBiasCurrent
1.3.6.1.4.1.2636.3.71.1.2.9.1.39
Integer32 · .1 mA
Average LaserBiasCurrent measured at Transceiver port
jnxIfOpticsPMCurTemperature
1.3.6.1.4.1.2636.3.71.1.2.9.1.40
Integer32 · Celcius
Temperature measured at Transceiver port
jnxIfOpticsPMCurMinTemperature
1.3.6.1.4.1.2636.3.71.1.2.9.1.41
Integer32 · Celcius
Minimum Temperature measured at Transceiver port
jnxIfOpticsPMCurMaxTemperature
1.3.6.1.4.1.2636.3.71.1.2.9.1.42
Integer32 · Celcius
Maximum Temperature measure at Transceiver port
jnxIfOpticsPMCurAvgTemperature
1.3.6.1.4.1.2636.3.71.1.2.9.1.43
Integer32 · Celcius
Average Temperature measure at Transceiver port
jnxIfOpticsPMCurCarFreqOffset
1.3.6.1.4.1.2636.3.71.1.2.9.1.44
Integer32 · MHz
Carrier frequency offset measured at Transceiver port
jnxIfOpticsPMCurMinCarFreqOffset
1.3.6.1.4.1.2636.3.71.1.2.9.1.45
Integer32 · MHz
Minimum Carrier frequency offset measured at Transceiver port
jnxIfOpticsPMCurMaxCarFreqOffset
1.3.6.1.4.1.2636.3.71.1.2.9.1.46
Integer32 · MHz
Maximum Carrier frequency offset measured at Transceiver port
jnxIfOpticsPMCurAvgCarFreqOffset
1.3.6.1.4.1.2636.3.71.1.2.9.1.47
Integer32 · MHz
Average Carrier frequency offset measured at Transceiver port
jnxIfOpticsPMCurRxLaserBiasCurrent
1.3.6.1.4.1.2636.3.71.1.2.9.1.48
Integer32 · .1 mA
Received LaserBiasCurrent measured at Transceiver port
jnxIfOpticsPMCurMinRxLaserBiasCurrent
1.3.6.1.4.1.2636.3.71.1.2.9.1.49
Integer32 · .1 mA
Received Minimum LaserBiasCurrent measured at Transceiver port
jnxIfOpticsPMCurMaxRxLaserBiasCurrent
1.3.6.1.4.1.2636.3.71.1.2.9.1.50
Integer32 · .1 mA
Received Maximum LaserBiasCurrent measured at Transceiver port
jnxIfOpticsPMCurAvgRxLaserBiasCurrent
1.3.6.1.4.1.2636.3.71.1.2.9.1.51
Integer32 · .1 mA
Received Average LaserBiasCurrent measured at Transceiver port
jnxIfOpticsPMCurTecCurrent
1.3.6.1.4.1.2636.3.71.1.2.9.1.52
Integer32 · .1 mA
Received TecCurrent measured at Transceiver port
jnxIfOpticsPMCurMinTecCurrent
1.3.6.1.4.1.2636.3.71.1.2.9.1.53
Integer32 · .1 mA
Received Minimum TecCurrent measured at Transceiver port
jnxIfOpticsPMCurMaxTecCurrent
1.3.6.1.4.1.2636.3.71.1.2.9.1.54
Integer32 · .1 mA
Received Maximum TecCurrent measured at Transceiver port
jnxIfOpticsPMCurAvgTecCurrent
1.3.6.1.4.1.2636.3.71.1.2.9.1.55
Integer32 · .1 mA
Received Average TecCurrent measured at Transceiver port
jnxIfOpticsPMCurResidualDispersion
1.3.6.1.4.1.2636.3.71.1.2.9.1.56
Integer32 · 0.1 ps/nm
Residual Dispersion measured at Transceiver port
jnxIfOpticsPMCurMinResidualDispersion
1.3.6.1.4.1.2636.3.71.1.2.9.1.57
Integer32 · 0.1 ps/nm
Minimum Residual Dispersion measured at Transceiver port
jnxIfOpticsPMCurMaxResidualDispersion
1.3.6.1.4.1.2636.3.71.1.2.9.1.58
Integer32 · 0.1 ps/nm
Maximum Residual Dispersion measured at Transceiver port
jnxIfOpticsPMCurAvgResidualDispersion
1.3.6.1.4.1.2636.3.71.1.2.9.1.59
Integer32 · 0.1 ps/nm
Average Residual Dispersion measured at Transceiver port
jnxIfOpticsPMCurLevelHistogram
1.3.6.1.4.1.2636.3.71.1.2.9.1.60
Integer32
The rate of measured signal at Transceiver port
jnxIfOpticsPMCurMinLevelHistogram
1.3.6.1.4.1.2636.3.71.1.2.9.1.61
Integer32
The Minimum rate of measured signal at Transceiver port
jnxIfOpticsPMCurMaxLevelHistogram
1.3.6.1.4.1.2636.3.71.1.2.9.1.62
Integer32
The Maximum rate of measured signal at Transceiver port
jnxIfOpticsPMCurAvgLevelHistogram
1.3.6.1.4.1.2636.3.71.1.2.9.1.63
Integer32
The Average rate of measured signal at Transceiver port
jnxIfOpticsPMCurLaserFrequencyError
1.3.6.1.4.1.2636.3.71.1.2.9.1.64
Integer32 · MHz
Laser Frequency Error measured at Transceiver port
jnxIfOpticsPMCurMinLaserFrequencyError
1.3.6.1.4.1.2636.3.71.1.2.9.1.65
Integer32 · MHz
Minimum Laser Frequency Error measured at Transceiver port
jnxIfOpticsPMCurMaxLaserFrequencyError
1.3.6.1.4.1.2636.3.71.1.2.9.1.66
Integer32 · MHz
Maximum Laser Frequency Error measured at Transceiver port
jnxIfOpticsPMCurAvgLaserFrequencyError
1.3.6.1.4.1.2636.3.71.1.2.9.1.67
Integer32 · MHz
Average Laser Frequency Error measured at Transceiver port
jnxIfOpticsPMCurFECCorrectedErrorsMantissa
1.3.6.1.4.1.2636.3.71.1.2.9.1.68
Integer32
Pre-FEC BER since last counter reset
jnxIfOpticsPMCurFECCorrectedErrorsExponent
1.3.6.1.4.1.2636.3.71.1.2.9.1.69
Integer32
Pre-FEC BER since last counter reset
jnxIfOpticsPMCurMinFECCorrectedErrorsMantissa
1.3.6.1.4.1.2636.3.71.1.2.9.1.70
Integer32
Minimum Pre-FEC BER since last counter reset
jnxIfOpticsPMCurMinFECCorrectedErrorsExponent
1.3.6.1.4.1.2636.3.71.1.2.9.1.71
Integer32
Minimum Pre-FEC BER since last counter reset
jnxIfOpticsPMCurMaxFECCorrectedErrorsMantissa
1.3.6.1.4.1.2636.3.71.1.2.9.1.72
Integer32
Maximum Pre-FEC BER since last counter reset
jnxIfOpticsPMCurMaxFECCorrectedErrorsExponent
1.3.6.1.4.1.2636.3.71.1.2.9.1.73
Integer32
Maximum Pre-FEC BER since last counter reset
jnxIfOpticsPMCurAvgFECCorrectedErrorsMantissa
1.3.6.1.4.1.2636.3.71.1.2.9.1.74
Integer32
Average Pre-FEC BER since last counter reset
jnxIfOpticsPMCurAvgFECCorrectedErrorsExponent
1.3.6.1.4.1.2636.3.71.1.2.9.1.75
Integer32
Average Pre-FEC BER since last counter reset
jnxIfOpticsPMCurFECUCorrectedWordsMantissa
1.3.6.1.4.1.2636.3.71.1.2.9.1.76
Integer32
Uncorrected BER since last counter reset
jnxIfOpticsPMCurFECUCorrectedWordsExponent
1.3.6.1.4.1.2636.3.71.1.2.9.1.77
Integer32
Uncorrected BER since last counter reset
jnxIfOpticsPMCurMinFECUCorrectedWordsMantissa
1.3.6.1.4.1.2636.3.71.1.2.9.1.78
Integer32
Minimum Uncorrected BER since last counter reset
jnxIfOpticsPMCurMinFECUCorrectedWordsExponent
1.3.6.1.4.1.2636.3.71.1.2.9.1.79
Integer32
Minimum Uncorrected BER since last counter reset
jnxIfOpticsPMCurMaxFECUCorrectedWordsMantissa
1.3.6.1.4.1.2636.3.71.1.2.9.1.80
Integer32
Maximum Uncorrected BER since last counter reset
jnxIfOpticsPMCurMaxFECUCorrectedWordsExponent
1.3.6.1.4.1.2636.3.71.1.2.9.1.81
Integer32
Maximum Uncorrected BER since last counter reset
jnxIfOpticsPMCurAvgFECUCorrectedWordsMantissa
1.3.6.1.4.1.2636.3.71.1.2.9.1.82
Integer32
Average Uncorrected BER since last counter reset
jnxIfOpticsPMCurAvgFECUCorrectedWordsExponent
1.3.6.1.4.1.2636.3.71.1.2.9.1.83
Integer32
Average Uncorrected BER since last counter reset
jnxIfOpticsPMIntervalTable
1.3.6.1.4.1.2636.3.71.1.2.10
Index: ifIndex · jnxIfOpticsPMIntervalLaneIndex · jnxIfOpticsPMIntervalNumber
A table of current PM entries.
from IF-MIB
ifIndex
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
jnxIfOpticsPMIntervalLaneIndex
1.3.6.1.4.1.2636.3.71.1.2.10.1.1
Unsigned32 (1..96)
This is the optics lane number.
jnxIfOpticsPMIntervalNumber
1.3.6.1.4.1.2636.3.71.1.2.10.1.2
Unsigned32 (1..96)
This is the 15 mintute interavl number.
jnxIfOpticsPMIntMinChromaticDispersion
1.3.6.1.4.1.2636.3.71.1.2.10.1.3
Integer32 · ps/nm
Residual Chromatic Dispersion measured at Rx Transceiver port - min in the 15 minute interval
jnxIfOpticsPMIntMaxChromaticDispersion
1.3.6.1.4.1.2636.3.71.1.2.10.1.4
Integer32 · ps/nm
Residual Chromatic Dispersion measured at Rx Transceiver port - max in the 15 minute interval
jnxIfOpticsPMIntAvgChromaticDispersion
1.3.6.1.4.1.2636.3.71.1.2.10.1.5
Integer32 · ps/nm
Residual Chromatic Dispersion measured at Rx Transceiver port - average in the 15 minute interval
jnxIfOpticsPMIntMinDiffGroupDelay
1.3.6.1.4.1.2636.3.71.1.2.10.1.6
Integer32 · ps
Differential group delay measured at Rx Transceiver port -- min in the 15 minute interval
jnxIfOpticsPMIntMaxDiffGroupDelay
1.3.6.1.4.1.2636.3.71.1.2.10.1.7
Integer32 · ps
Differential group delay measured at Rx Transceiver port -- max in the 15 minute interval
jnxIfOpticsPMIntAvgDiffGroupDelay
1.3.6.1.4.1.2636.3.71.1.2.10.1.8
Integer32 · ps
Differential group delay measured at Rx Transceiver port -- average in the 15 minute interval
jnxIfOpticsPMIntMinPolarState
1.3.6.1.4.1.2636.3.71.1.2.10.1.9
Integer32 · rad/s
Polarization state -- min in the 15 minute interval
jnxIfOpticsPMIntMaxPolarState
1.3.6.1.4.1.2636.3.71.1.2.10.1.10
Integer32 · rad/s
Polarization state -- max in the 15 minute interval
jnxIfOpticsPMIntAvgPolarState
1.3.6.1.4.1.2636.3.71.1.2.10.1.11
Integer32 · rad/s
Polarization state -- average in the 15 minute interval
jnxIfOpticsPMIntMinPolarDependentLoss
1.3.6.1.4.1.2636.3.71.1.2.10.1.12
Integer32 · 0.1 dB
Polarization Dependent Loss -- min in the 15 minute interval
jnxIfOpticsPMIntMaxPolarDependentLoss
1.3.6.1.4.1.2636.3.71.1.2.10.1.13
Integer32 · 0.1 dB
Polarization Dependent Loss -- max in the 15 minute interval
jnxIfOpticsPMIntAvgPolarDependentLoss
1.3.6.1.4.1.2636.3.71.1.2.10.1.14
Integer32 · 0.1 dB
Polarization Dependent Loss -- average in the 15 minute interval
jnxIfOpticsPMIntMinQ
1.3.6.1.4.1.2636.3.71.1.2.10.1.15
Integer32 · 0.1 dB
Q -- min in the 15 minute interval
jnxIfOpticsPMIntMaxQ
1.3.6.1.4.1.2636.3.71.1.2.10.1.16
Integer32 · 0.1 dB
Q -- max in the 15 minute interval
jnxIfOpticsPMIntAvgQ
1.3.6.1.4.1.2636.3.71.1.2.10.1.17
Integer32 · 0.1 dB
Q -- Avg in the 15 minute interval
jnxIfOpticsPMIntMinSNR
1.3.6.1.4.1.2636.3.71.1.2.10.1.18
Integer32 · 0.1 dB
SNR -- min in the 15 minute interval
jnxIfOpticsPMIntMaxSNR
1.3.6.1.4.1.2636.3.71.1.2.10.1.19
Integer32 · 0.1 dB
SNR -- max in the 15 minute interval
jnxIfOpticsPMIntAvgSNR
1.3.6.1.4.1.2636.3.71.1.2.10.1.20
Integer32 · 0.1 dB
SNR -- avg in the 15 minute interval
jnxIfOpticsPMIntMinTxOutputPower
1.3.6.1.4.1.2636.3.71.1.2.10.1.21
Integer32 · 0.01 dbm
TxOutputPower -- min in the 15 minute interval
jnxIfOpticsPMIntMaxTxOutputPower
1.3.6.1.4.1.2636.3.71.1.2.10.1.22
Integer32 · 0.01 dbm
TxOutputPower -- max in the 15 minute interval
jnxIfOpticsPMIntAvgTxOutputPower
1.3.6.1.4.1.2636.3.71.1.2.10.1.23
Integer32 · 0.01 dbm
TxOutputPower -- average in the 15 minute interval
jnxIfOpticsPMIntMinRxInputPower
1.3.6.1.4.1.2636.3.71.1.2.10.1.24
Integer32 · 0.01 dbm
RxInputPower -- min in the 15 minute interval
jnxIfOpticsPMIntMaxRxInputPower
1.3.6.1.4.1.2636.3.71.1.2.10.1.25
Integer32 · 0.01 dbm
RxInputPower -- max in the 15 minute interval
jnxIfOpticsPMIntAvgRxInputPower
1.3.6.1.4.1.2636.3.71.1.2.10.1.26
Integer32 · 0.01 dbm
RxInputPower -- average in the 15 minute interval
jnxIfOpticsPMIntTimeStamp
1.3.6.1.4.1.2636.3.71.1.2.10.1.27
DateAndTimeA date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC* 0..13 10 11 minutes from UTC 0..59 * Notes: - the value of year is in network-byte order - daylight saving time in New Zealand is +13 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 Note that if only local time is known, then timezone information (fields 8-10) is not present. SIZE (8 | 11) · OCTET STRING · hint 2d-1d-1d,1d:1d:1d.1d,1a1d:1d
Time stamp PM interval
jnxIfOpticsPMIntSuspectedFlag
1.3.6.1.4.1.2636.3.71.1.2.10.1.28
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
If true, the data in this entry may be unreliable.
jnxIfOpticsPMIntSuspectReason
1.3.6.1.4.1.2636.3.71.1.2.10.1.29
Integer32
If SuspectedFlag is true, the reson for the PM data being suspect. 0 - not applicable 1 - unknown 2 - new object 3 - interface disabled 4 - clock shift detected 5 - cleared by user 6 - interval too short secs < 890 7 - interval too long secs > 910 8 - near end unavailable 9 - far end unavailable 10 - partial data 11 - missing intervals due to restarts
jnxIfOpticsPMIntMinTxLaserBiasCurrent
1.3.6.1.4.1.2636.3.71.1.2.10.1.30
Integer32 · .1 mA
Transmit Minimum LaserBiasCurrent measured at Transceiver port
jnxIfOpticsPMIntMaxTxLaserBiasCurrent
1.3.6.1.4.1.2636.3.71.1.2.10.1.31
Integer32 · .1 mA
Transmit Maximum LaserBiasCurrent measured at Transceiver port
jnxIfOpticsPMIntAvgTxLaserBiasCurrent
1.3.6.1.4.1.2636.3.71.1.2.10.1.32
Integer32 · .1 mA
Transmit Average LaserBiasCurrent measured at Transceiver port
jnxIfOpticsPMIntMinTemperature
1.3.6.1.4.1.2636.3.71.1.2.10.1.33
Integer32 · Celcius
Minimum Temperature measured at Transceiver port
jnxIfOpticsPMIntMaxTemperature
1.3.6.1.4.1.2636.3.71.1.2.10.1.34
Integer32 · Celcius
Maximum Temperature measure at Transceiver port
jnxIfOpticsPMIntAvgTemperature
1.3.6.1.4.1.2636.3.71.1.2.10.1.35
Integer32 · Celcius
Average Temperature measure at Transceiver port
jnxIfOpticsPMIntMinCarFreqOffset
1.3.6.1.4.1.2636.3.71.1.2.10.1.36
Integer32 · Mhz
Minimum Carrier frequency offset measured at Transceiver port
jnxIfOpticsPMIntMaxCarFreqOffset
1.3.6.1.4.1.2636.3.71.1.2.10.1.37
Integer32 · MHz
Maximum Carrier frequency offset measured at Transceiver port
jnxIfOpticsPMIntAvgCarFreqOffset
1.3.6.1.4.1.2636.3.71.1.2.10.1.38
Integer32 · MHz
Average Carrier frequency offset measured at Transceiver port
jnxIfOpticsPMIntMinRxLaserBiasCurrent
1.3.6.1.4.1.2636.3.71.1.2.10.1.39
Integer32 · .1 mA
Receive Minimum LaserBiasCurrent measured at Transceiver port
jnxIfOpticsPMIntMaxRxLaserBiasCurrent
1.3.6.1.4.1.2636.3.71.1.2.10.1.40
Integer32 · .1 mA
Receive Maximum LaserBiasCurrent measured at Transceiver port
jnxIfOpticsPMIntAvgRxLaserBiasCurrent
1.3.6.1.4.1.2636.3.71.1.2.10.1.41
Integer32 · .1 mA
Receive Average LaserBiasCurrent measured at Transceiver port
jnxIfOpticsPMIntMinTecCurrent
1.3.6.1.4.1.2636.3.71.1.2.10.1.42
Integer32 · .1 mA
Received Minimum TecCurrent measured at Transceiver port -- min in the 15 minute interval
jnxIfOpticsPMIntMaxTecCurrent
1.3.6.1.4.1.2636.3.71.1.2.10.1.43
Integer32 · .1 mA
Received Maximum TecCurrent measured at Transceiver port -- min in the 15 minute interval
jnxIfOpticsPMIntAvgTecCurrent
1.3.6.1.4.1.2636.3.71.1.2.10.1.44
Integer32 · .1 mA
Received Average TecCurrent measured at Transceiver port -- min in the 15 minute interval
jnxIfOpticsPMIntMinResidualDispersion
1.3.6.1.4.1.2636.3.71.1.2.10.1.45
Integer32 · 0.1 ps/nm
Minimum Residual Dispersion measured at Transceiver port -- min in the 15 minute interval
jnxIfOpticsPMIntMaxResidualDispersion
1.3.6.1.4.1.2636.3.71.1.2.10.1.46
Integer32 · 0.1 ps/nm
Maximum Residual Dispersion measured at Transceiver port -- min in the 15 minute interval
jnxIfOpticsPMIntAvgResidualDispersion
1.3.6.1.4.1.2636.3.71.1.2.10.1.47
Integer32 · 0.1 ps/nm
Average Residual Dispersion measured at Transceiver port -- min in the 15 minute interval
jnxIfOpticsPMIntMinLevelHistogram
1.3.6.1.4.1.2636.3.71.1.2.10.1.48
Integer32
The Minimum rate of measured signal at Transceiver port -- min in the 15 minute interval
jnxIfOpticsPMIntMaxLevelHistogram
1.3.6.1.4.1.2636.3.71.1.2.10.1.49
Integer32
The Maximum rate of measured signal at Transceiver port -- min in the 15 minute interval
jnxIfOpticsPMIntAvgLevelHistogram
1.3.6.1.4.1.2636.3.71.1.2.10.1.50
Integer32
The Average rate of measured signal at Transceiver port -- min in the 15 minute interval
jnxIfOpticsPMIntMinLaserFrequencyError
1.3.6.1.4.1.2636.3.71.1.2.10.1.51
Integer32 · MHz
Minimum Laser Frequency Error measured at Transceiver port -- min in the 15 minute interval
jnxIfOpticsPMIntMaxLaserFrequencyError
1.3.6.1.4.1.2636.3.71.1.2.10.1.52
Integer32 · MHz
Maximum Laser Frequency Error measured at Transceiver port -- min in the 15 minute interval
jnxIfOpticsPMIntAvgLaserFrequencyError
1.3.6.1.4.1.2636.3.71.1.2.10.1.53
Integer32 · MHz
Average Laser Frequency Error measured at Transceiver port -- min in the 15 minute interval
jnxIfOpticsPMIntMinFECCorrectedErrorsMantissa
1.3.6.1.4.1.2636.3.71.1.2.10.1.54
Integer32
Minimum Pre-FEC BER since last counter reset -- min in the 15 minute interval
jnxIfOpticsPMIntMinFECCorrectedErrorsExponent
1.3.6.1.4.1.2636.3.71.1.2.10.1.55
Integer32
Minimum Pre-FEC BER since last counter reset -- min in the 15 minute interval
jnxIfOpticsPMIntMaxFECCorrectedErrorsMantissa
1.3.6.1.4.1.2636.3.71.1.2.10.1.56
Integer32
Maximum Pre-FEC BER since last counter reset -- min in the 15 minute interval
jnxIfOpticsPMIntMaxFECCorrectedErrorsExponent
1.3.6.1.4.1.2636.3.71.1.2.10.1.57
Integer32
Maximum Pre-FEC BER since last counter reset -- min in the 15 minute interval
jnxIfOpticsPMIntAvgFECCorrectedErrorsMantissa
1.3.6.1.4.1.2636.3.71.1.2.10.1.58
Integer32
Average Pre-FEC BER since last counter reset -- min in the 15 minute interval
jnxIfOpticsPMIntAvgFECCorrectedErrorsExponent
1.3.6.1.4.1.2636.3.71.1.2.10.1.59
Integer32
Average Pre-FEC BER since last counter reset -- min in the 15 minute interval
jnxIfOpticsPMIntMinFECUCorrectedWordsMantissa
1.3.6.1.4.1.2636.3.71.1.2.10.1.60
Integer32
Minimum Uncorrected BER since last counter reset -- min in the 15 minute interval
jnxIfOpticsPMIntMinFECUCorrectedWordsExponent
1.3.6.1.4.1.2636.3.71.1.2.10.1.61
Integer32
Minimum Uncorrected BER since last counter reset -- min in the 15 minute interval
jnxIfOpticsPMIntMaxFECUCorrectedWordsMantissa
1.3.6.1.4.1.2636.3.71.1.2.10.1.62
Integer32
Maximum Uncorrected BER since last counter reset -- min in the 15 minute interval
jnxIfOpticsPMIntMaxFECUCorrectedWordsExponent
1.3.6.1.4.1.2636.3.71.1.2.10.1.63
Integer32
Maximum Uncorrected BER since last counter reset -- min in the 15 minute interval
jnxIfOpticsPMIntAvgFECUCorrectedWordsMantissa
1.3.6.1.4.1.2636.3.71.1.2.10.1.64
Integer32
Average Uncorrected BER since last counter reset -- min in the 15 minute interval
jnxIfOpticsPMIntAvgFECUCorrectedWordsExponent
1.3.6.1.4.1.2636.3.71.1.2.10.1.65
Integer32
Average Uncorrected BER since last counter reset -- min in the 15 minute interval
jnxIfOpticsPMDayTable
1.3.6.1.4.1.2636.3.71.1.2.11
Index: ifIndex · jnxIfOpticsPMDayLaneIndex · jnxIfOpticsPMDayIndex
A table of current PM Day entries.
from IF-MIB
ifIndex
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
jnxIfOpticsPMDayLaneIndex
1.3.6.1.4.1.2636.3.71.1.2.11.1.1
Unsigned32 (1..96)
This is the optics lane number.
jnxIfOpticsPMDayIndex
1.3.6.1.4.1.2636.3.71.1.2.11.1.2
Unsigned32 (1..2)
This is 1 - cur day/ 2 - prev day
jnxIfOpticsPMDayMinChromaticDispersion
1.3.6.1.4.1.2636.3.71.1.2.11.1.3
Integer32 · ps/nm
Residual Chromatic Dispersion measured at Rx Transceiver port - min in the day
jnxIfOpticsPMDayMaxChromaticDispersion
1.3.6.1.4.1.2636.3.71.1.2.11.1.4
Integer32 · ps/nm
Residual Chromatic Dispersion measured at Rx Transceiver port - max in the day
jnxIfOpticsPMDayAvgChromaticDispersion
1.3.6.1.4.1.2636.3.71.1.2.11.1.5
Integer32 · ps/nm
Residual Chromatic Dispersion measured at Rx Transceiver port - average in the day
jnxIfOpticsPMDayMinDiffGroupDelay
1.3.6.1.4.1.2636.3.71.1.2.11.1.6
Integer32 · ps
Differential Group Delay measured at Rx Transceiver port -- min in the day
jnxIfOpticsPMDayMaxDiffGroupDelay
1.3.6.1.4.1.2636.3.71.1.2.11.1.7
Integer32 · ps
Differential Group Delay measured at Rx Transceiver port -- max in the day
jnxIfOpticsPMDayAvgDiffGroupDelay
1.3.6.1.4.1.2636.3.71.1.2.11.1.8
Integer32 · ps
Differential Group Delay measured at Rx Transceiver port -- average in the day
jnxIfOpticsPMDayMinPolarState
1.3.6.1.4.1.2636.3.71.1.2.11.1.9
Integer32 · rad/s
Polarization state -- min in the day
jnxIfOpticsPMDayMaxPolarState
1.3.6.1.4.1.2636.3.71.1.2.11.1.10
Integer32 · rad/s
Polarization state -- max in the day
jnxIfOpticsPMDayAvgPolarState
1.3.6.1.4.1.2636.3.71.1.2.11.1.11
Integer32 · rad/s
Polarization state -- average in the day
jnxIfOpticsPMDayMinPolarDependentLoss
1.3.6.1.4.1.2636.3.71.1.2.11.1.12
Integer32 · 0.1 dB
Polarization Dependent Loss -- min in the day
jnxIfOpticsPMDayMaxPolarDependentLoss
1.3.6.1.4.1.2636.3.71.1.2.11.1.13
Integer32 · 0.1 dB
Polarization Dependent Loss -- max in the day
jnxIfOpticsPMDayAvgPolarDependentLoss
1.3.6.1.4.1.2636.3.71.1.2.11.1.14
Integer32 · 0.1 dB
Polarization Dependent Loss -- average in the day interval
jnxIfOpticsPMDayMinQ
1.3.6.1.4.1.2636.3.71.1.2.11.1.15
Integer32 · 0.1 dB
Q -- min in the day
jnxIfOpticsPMDayMaxQ
1.3.6.1.4.1.2636.3.71.1.2.11.1.16
Integer32 · 0.1 dB
Q -- max in the day
jnxIfOpticsPMDayAvgQ
1.3.6.1.4.1.2636.3.71.1.2.11.1.17
Integer32 · 0.1 dB
Q -- Avg in the day
jnxIfOpticsPMDayMinSNR
1.3.6.1.4.1.2636.3.71.1.2.11.1.18
Integer32 · 0.1 dB
SNR -- min in the day
jnxIfOpticsPMDayMaxSNR
1.3.6.1.4.1.2636.3.71.1.2.11.1.19
Integer32 · 0.1 dB
SNR -- max in the day
jnxIfOpticsPMDayAvgSNR
1.3.6.1.4.1.2636.3.71.1.2.11.1.20
Integer32 · 0.1 dB
SNR -- avg in the day
jnxIfOpticsPMDayMinTxOutputPower
1.3.6.1.4.1.2636.3.71.1.2.11.1.21
Integer32 · 0.01 dbm
TxOutputPower -- min in the day
jnxIfOpticsPMDayMaxTxOutputPower
1.3.6.1.4.1.2636.3.71.1.2.11.1.22
Integer32 · 0.01 dbm
TxOutputPower -- max in the day.
jnxIfOpticsPMDayAvgTxOutputPower
1.3.6.1.4.1.2636.3.71.1.2.11.1.23
Integer32 · 0.01 dbm
TxOutputPower -- average in the day.
jnxIfOpticsPMDayMinRxInputPower
1.3.6.1.4.1.2636.3.71.1.2.11.1.24
Integer32 · 0.01 dbm
RxInputPower -- min in the day.
jnxIfOpticsPMDayMaxRxInputPower
1.3.6.1.4.1.2636.3.71.1.2.11.1.25
Integer32 · 0.01 dbm
RxInputPower -- max in the day.
jnxIfOpticsPMDayAvgRxInputPower
1.3.6.1.4.1.2636.3.71.1.2.11.1.26
Integer32 · 0.01 dbm
RxInputPower -- average in the day.
jnxIfOpticsPMDayTimeStamp
1.3.6.1.4.1.2636.3.71.1.2.11.1.27
DateAndTimeA date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC* 0..13 10 11 minutes from UTC 0..59 * Notes: - the value of year is in network-byte order - daylight saving time in New Zealand is +13 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 Note that if only local time is known, then timezone information (fields 8-10) is not present. SIZE (8 | 11) · OCTET STRING · hint 2d-1d-1d,1d:1d:1d.1d,1a1d:1d
Time for the Day.
jnxIfOpticsPMDaySuspectedFlag
1.3.6.1.4.1.2636.3.71.1.2.11.1.28
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
If true, the data in this entry may be unreliable.
jnxIfOpticsPMDaySuspectReason
1.3.6.1.4.1.2636.3.71.1.2.11.1.29
Integer32
If SuspectedFlag is true, the reson for the PM data being suspect. 0 - not applicable 1 - unknown 2 - new object 3 - interface disabled 4 - clock shift detected 5 - cleared by user 6 - partial data 7 - one or more intervals are invaild
jnxIfOpticsPMDayMinTxLaserBiasCurrent
1.3.6.1.4.1.2636.3.71.1.2.11.1.30
Integer32 · .1 mA
Transmit LaserBiasCurrent measured at Transceiver port
jnxIfOpticsPMDayMaxTxLaserBiasCurrent
1.3.6.1.4.1.2636.3.71.1.2.11.1.31
Integer32 · .1 mA
Transmit Minimum LaserBiasCurrent measured at Transceiver port
jnxIfOpticsPMDayAvgTxLaserBiasCurrent
1.3.6.1.4.1.2636.3.71.1.2.11.1.32
Integer32 · .1 mA
Transmit Maximum LaserBiasCurrent measured at Transceiver port
jnxIfOpticsPMDayMinTemperature
1.3.6.1.4.1.2636.3.71.1.2.11.1.33
Integer32 · Celcius
Minimum Temperature measured at Transceiver port
jnxIfOpticsPMDayMaxTemperature
1.3.6.1.4.1.2636.3.71.1.2.11.1.34
Integer32 · Celcius
Maximum Temperature measure at Transceiver port
jnxIfOpticsPMDayAvgTemperature
1.3.6.1.4.1.2636.3.71.1.2.11.1.35
Integer32 · Celcius
Average Temperature measure at Transceiver port
jnxIfOpticsPMDayMinCarFreqOffset
1.3.6.1.4.1.2636.3.71.1.2.11.1.36
Integer32 · Mhz
Minimum Carrier frequency offset measured at Transceiver port
jnxIfOpticsPMDayMaxCarFreqOffset
1.3.6.1.4.1.2636.3.71.1.2.11.1.37
Integer32 · MHz
Maximum Carrier frequency offset measured at Transceiver port
jnxIfOpticsPMDayAvgCarFreqOffset
1.3.6.1.4.1.2636.3.71.1.2.11.1.38
Integer32 · MHz
Average Carrier frequency offset measured at Transceiver port
jnxIfOpticsPMDayMinRxLaserBiasCurrent
1.3.6.1.4.1.2636.3.71.1.2.11.1.39
Integer32 · .1 mA
Receive LaserBiasCurrent measured at Transceiver port
jnxIfOpticsPMDayMaxRxLaserBiasCurrent
1.3.6.1.4.1.2636.3.71.1.2.11.1.40
Integer32 · .1 mA
Receive Minimum LaserBiasCurrent measured at Transceiver port
jnxIfOpticsPMDayAvgRxLaserBiasCurrent
1.3.6.1.4.1.2636.3.71.1.2.11.1.41
Integer32 · .1 mA
Receive Maximum LaserBiasCurrent measured at Transceiver port
jnxIfOpticsPMDayMinTecCurrent
1.3.6.1.4.1.2636.3.71.1.2.11.1.42
Integer32 · .1 mA
Received Minimum TecCurrent measured at Transceiver port
jnxIfOpticsPMDayMaxTecCurrent
1.3.6.1.4.1.2636.3.71.1.2.11.1.43
Integer32 · .1 mA
Received Maximum TecCurrent measured at Transceiver port
jnxIfOpticsPMDayAvgTecCurrent
1.3.6.1.4.1.2636.3.71.1.2.11.1.44
Integer32 · .1 mA
Received Average TecCurrent measured at Transceiver port
jnxIfOpticsPMDayMinResidualDispersion
1.3.6.1.4.1.2636.3.71.1.2.11.1.45
Integer32 · 0.1 ps/nm
Minimum Residual Dispersion measured at Transceiver port
jnxIfOpticsPMDayMaxResidualDispersion
1.3.6.1.4.1.2636.3.71.1.2.11.1.46
Integer32 · 0.1 ps/nm
Maximum Residual Dispersion measured at Transceiver port
jnxIfOpticsPMDayAvgResidualDispersion
1.3.6.1.4.1.2636.3.71.1.2.11.1.47
Integer32 · 0.1 ps/nm
Average Residual Dispersion measured at Transceiver port
jnxIfOpticsPMDayMinLevelHistogram
1.3.6.1.4.1.2636.3.71.1.2.11.1.48
Integer32
The Minimum rate of measured signal at Transceiver port
jnxIfOpticsPMDayMaxLevelHistogram
1.3.6.1.4.1.2636.3.71.1.2.11.1.49
Integer32
The Maximum rate of measured signal at Transceiver port
jnxIfOpticsPMDayAvgLevelHistogram
1.3.6.1.4.1.2636.3.71.1.2.11.1.50
Integer32
The Average rate of measured signal at Transceiver port
jnxIfOpticsPMDayMinLaserFrequencyError
1.3.6.1.4.1.2636.3.71.1.2.11.1.51
Integer32 · MHz
Minimum Laser Frequency Error measured at Transceiver port
jnxIfOpticsPMDayMaxLaserFrequencyError
1.3.6.1.4.1.2636.3.71.1.2.11.1.52
Integer32 · MHz
Maximum Laser Frequency Error measured at Transceiver port
jnxIfOpticsPMDayAvgLaserFrequencyError
1.3.6.1.4.1.2636.3.71.1.2.11.1.53
Integer32 · MHz
Average Laser Frequency Error measured at Transceiver port
jnxIfOpticsPMDayMinFECCorrectedErrorsMantissa
1.3.6.1.4.1.2636.3.71.1.2.11.1.54
Integer32
Minimum Pre-FEC BER since last counter reset
jnxIfOpticsPMDayMinFECCorrectedErrorsExponent
1.3.6.1.4.1.2636.3.71.1.2.11.1.55
Integer32
Minimum Pre-FEC BER since last counter reset
jnxIfOpticsPMDayMaxFECCorrectedErrorsMantissa
1.3.6.1.4.1.2636.3.71.1.2.11.1.56
Integer32
Maximum Pre-FEC BER since last counter reset
jnxIfOpticsPMDayMaxFECCorrectedErrorsExponent
1.3.6.1.4.1.2636.3.71.1.2.11.1.57
Integer32
Maximum Pre-FEC BER since last counter reset
jnxIfOpticsPMDayAvgFECCorrectedErrorsMantissa
1.3.6.1.4.1.2636.3.71.1.2.11.1.58
Integer32
Average Pre-FEC BER since last counter reset
jnxIfOpticsPMDayAvgFECCorrectedErrorsExponent
1.3.6.1.4.1.2636.3.71.1.2.11.1.59
Integer32
Average Pre-FEC BER since last counter reset
jnxIfOpticsPMDayMinFECUCorrectedWordsMantissa
1.3.6.1.4.1.2636.3.71.1.2.11.1.60
Integer32
Minimum Uncorrected BER since last counter reset
jnxIfOpticsPMDayMinFECUCorrectedWordsExponent
1.3.6.1.4.1.2636.3.71.1.2.11.1.61
Integer32
Minimum Uncorrected BER since last counter reset
jnxIfOpticsPMDayMaxFECUCorrectedWordsMantissa
1.3.6.1.4.1.2636.3.71.1.2.11.1.62
Integer32
Maximum Uncorrected BER since last counter reset
jnxIfOpticsPMDayMaxFECUCorrectedWordsExponent
1.3.6.1.4.1.2636.3.71.1.2.11.1.63
Integer32
Maximum Uncorrected BER since last counter reset
jnxIfOpticsPMDayAvgFECUCorrectedWordsMantissa
1.3.6.1.4.1.2636.3.71.1.2.11.1.64
Integer32
Average Uncorrected BER since last counter reset
jnxIfOpticsPMDayAvgFECUCorrectedWordsExponent
1.3.6.1.4.1.2636.3.71.1.2.11.1.65
Integer32
Average Uncorrected BER since last counter reset
jnxOpticsNotificationTable
1.3.6.1.4.1.2636.3.71.1.3.1
Index: ifIndex · jnxOpticsNotificationLocation · jnxOpticsNotificationDirection
A table of Notification entries.
from IF-MIB
ifIndex
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
jnxOpticsNotificationLocation
1.3.6.1.4.1.2636.3.71.1.3.1.1.1
JnxOpticsLocation1 = jnxNearEnd2 = jnxFarEndNear End or Far End · Integer32
The object identifies indicates if this entry was for Near end/Far end.
jnxOpticsNotificationDirection
1.3.6.1.4.1.2636.3.71.1.3.1.1.2
JnxOpticsDirection1 = jnxTxDir2 = jnxRxDir3 = jnxBiDirIndicates the direction as Rx/Tx or bi-directional. · Integer32
The object identifies indicates if this entry was for for the Tx/Rx or both.
jnxOpticsLastNotificationId
1.3.6.1.4.1.2636.3.71.1.3.1.1.3
JnxOpticsNotificationId1 = jnxOpticsLOS2 = jnxOpticsWavelenthLockErr3 = jnxOpticsPowerHighAlarm4 = jnxOpticsPowerLowAlarm5 = jnxOpticsBiasCurrentHighAlarm6 = jnxOpticsBiasCurrentLowAlarm7 = jnxOpticsTemperatureHighAlarm8 = jnxOpticsTemperaturelowAlarm9 = jnxOpticsTxPLLLockAlarm10 = jnxOpticsRxPLLLockAlarm11 = jnxOpticsAvgPowerAlarm12 = jnxOpticsRxLossAvgPowerAlarm13 = jnxOpticsLossofACPowerAlarm14 = jnxOpticsTxPowerHighThreshAlert15 = jnxOpticsTxPowerLowThreshAlert16 = jnxOpticsRxPowerHighThreshAlert17 = jnxOpticsRxPowerLowThreshAlert18 = jnxOpticsModuleTempHighThreshAlert19 = jnxOpticsModuleTempLowThreshAlert20 = jnxOptics24HourTxPowerHighThreshAlert21 = jnxOptics24HourTxPowerLowThreshAlert22 = jnxOptics24HourRxPowerHighThreshAlert23 = jnxOptics24HourRxPowerLowThreshAlert24 = jnxOptics24HourModuleTempHighThreshAlert25 = jnxOptics24HourModuleTempLowThreshAlert26 = jnxOpticsRxPowerHighAlarm27 = jnxOpticsRxPowerLowAlarm28 = jnxOpticsTxPowerHighWarning29 = jnxOpticsTxPowerLowWarning30 = jnxOpticsRxPowerHighWarning31 = jnxOpticsRxPowerLowWarning32 = jnxOpticsModuleTempHighWarning33 = jnxOpticsModuleTempLowWarning34 = jnxOpticsRxCarrierFreqHigh35 = jnxOpticsRxCarrierFreqLow36 = jnxOpticsChromaticDispHighWarning37 = jnxOpticsChromaticDispLowWarning38 = jnxOpticsQLowWarning39 = jnxOpticsOSNRLowWarning40 = jnxOpticsCarrierFreqHighAlert41 = jnxOpticsCarrierFreqLowAlert42 = jnxOptics24HourCarrierFreqHighAlert43 = jnxOptics24HourCarrierFreqLowAlert44 = jnxOpticsLossOfLock45 = jnxOpticsLossOfSignal46 = jnxOpticsLossOfFrame47 = jnxOpticsLossOfMultiFrame48 = jnxOpticsOTUBDI49 = jnxOpticsRxModemSYncFault50 = jnxOpticsRxModemLOL51 = jnxOpticsRxLOA52 = jnxOpticsModBiasControlLoopFail53 = jnxOpticsILTAfault54 = jnxOpticsDACcalibrationfault55 = jnxOpticsADCcalibrationfault56 = jnxOpticsTecCurrentHighAlert57 = jnxOpticsTecCurrentLowAlert58 = jnxOpticsPamHistogramHighAlert59 = jnxOpticsResidualIsiHighAlert60 = jnxOpticsResidualIsiLowAlert61 = jnxOpticsFecCorrectedErrorsHighAlert62 = jnxOpticsFecUCorrectedWordsHighAlert63 = jnxOptics24HourTecCurrentHighAlert64 = jnxOptics24HourTecCurrentLowAlert65 = jnxOptics24HourPamHistogramHighAlert66 = jnxOptics24HourResidualIsiHighAlert67 = jnxOptics24HourResidualIsiLowAlert68 = jnxOptics24HourFecCorrectedErrorsHighAlert69 = jnxOptics24HourFecUCorrectedWordsHighAlert70 = jnxOpticsLaserFreqErrorHighAlert71 = jnxOpticsLaserFreqErrorLowAlert72 = jnxOptics24HourLaserFreqErrorHighAlert73 = jnxOptics24HourLaserFreqErrorLowAlert74 = jnxOpticsSnrLowAlert75 = jnxOptics24HourSnrLowAlert76 = jnxOpticsPreFecBERHighAlert77 = jnxOptics24HourPreFecBERHignAlert78 = jnxOpticsRxSignalPowerHighThreshAlert79 = jnxOpticsRxSignalPowerLowThreshAlert80 = jnxOptics24HourRxSignalPowerHighThreshAlert81 = jnxOptics24HourRxSignalPowerLowThreshAlertOptic alarm types · Integer32
The object identifies the OTN alarm that most recently was set or cleared.
jnxOpticsNotificationSeverity
1.3.6.1.4.1.2636.3.71.1.3.1.1.4
JnxOpticsSeverity1 = jnxCritical2 = jnxMajor3 = jnxMinor4 = jnxInfoSeverity of the Notification · Integer32
The object identifies the severity of the last alarm/alert that most recently was set or cleared.
jnxOpticsNotificationDate
1.3.6.1.4.1.2636.3.71.1.3.1.1.5
DateAndTimeA date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC* 0..13 10 11 minutes from UTC 0..59 * Notes: - the value of year is in network-byte order - daylight saving time in New Zealand is +13 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 Note that if only local time is known, then timezone information (fields 8-10) is not present. SIZE (8 | 11) · OCTET STRING · hint 2d-1d-1d,1d:1d:1d.1d,1a1d:1d
This specifies the date and time when this alarm occurred.
jnxOpticsNotificationLaneIndex
1.3.6.1.4.1.2636.3.71.1.3.1.1.6
Integer32 (1..1024)
The lane index associated with this subject.. eg port.
jnxOpticsOCh2ConfigTable
1.3.6.1.4.1.2636.3.71.1.4.1
Index: jnxOpticsOCh2CfgContIndex · jnxOpticsOCh2CfgL1Index · jnxOpticsOCh2CfgL2Index · jnxOpticsOCh2CfgL3Index · jnxOpticsOCh2CfgL4Index
Table was for 48x10G/12x40G gingerALE PIC in 10G mode. It is not supported hence marked as obsolete. Information about the optics config Table.
jnxOpticsOCh2CfgContIndex
1.3.6.1.4.1.2636.3.71.1.4.1.1.1
Integer32 (1..1024)
The Contianer index associated with this subject
jnxOpticsOCh2CfgL1Index
1.3.6.1.4.1.2636.3.71.1.4.1.1.2
Integer32 (1..1024)
FPC slot number of the interface
jnxOpticsOCh2CfgL2Index
1.3.6.1.4.1.2636.3.71.1.4.1.1.3
Integer32 (1..1024)
PIC slot number of the interface
jnxOpticsOCh2CfgL3Index
1.3.6.1.4.1.2636.3.71.1.4.1.1.4
Integer32 (1..1024)
Port number of the interface
jnxOpticsOCh2CfgL4Index
1.3.6.1.4.1.2636.3.71.1.4.1.1.5
Integer32 (1..1024)
Sub-Port number of the interface
jnxOpticsOCh2Type
1.3.6.1.4.1.2636.3.71.1.4.1.1.6
Integer32
0 - none 1 - SFP 2 - XFP 3 - SFP+ 4 - XFP+ 5 - CFP 6 - CFP+ 7 - Non pluggable
jnxOpticsOCh2LaserEnable
1.3.6.1.4.1.2636.3.71.1.4.1.1.7
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
0 - laser off 1 - laser on
jnxOpticsOCh2Wavelength
1.3.6.1.4.1.2636.3.71.1.4.1.1.8
Unsigned32 · 0.01 nm
The transmit wavelength of the laser.
jnxOpticsOCh2Spacing
1.3.6.1.4.1.2636.3.71.1.4.1.1.9
JnxOpticsChannelSpacing1 = spacing100Ghz2 = spacing50Ghz3 = spacing25Ghz4 = spacing12point5Ghz5 = spacing6point5GhzChannel spacing 1 - 100 Ghz 2 - 50 GHz 3 - 25 GHz 4 - 12.5 GHz 5 - 6.25 Ghz · Integer32
A minimum nominal difference in frequency (GHz) between two adjacent channels.
jnxOpticsOCh2Modulation
1.3.6.1.4.1.2636.3.71.1.4.1.1.10
Unsigned32
Modulation Unknown - (1), NonPSK - (2), ODB - (3), DPSK - (4), QPSK - (5), DQPSK - (6), DPQPSK - (7), 16QAM - (8), 64QAM - (9), 256QAM - (10)
jnxOpticsOCh2TxOpticalPower
1.3.6.1.4.1.2636.3.71.1.4.1.1.11
Integer32 · 0.01 dbm
Transmit optical power.
jnxOpticsOCh2RxOpticalPower
1.3.6.1.4.1.2636.3.71.1.4.1.1.12
Integer32 · 0.01 dbm
Receive optical power.
jnxOpticsOCh2ModTempHighThresh
1.3.6.1.4.1.2636.3.71.1.4.1.1.13
Integer32 · Celsius (0.01 degrees C)
High module temerature in degree fahrenheit for a 15 minute period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
jnxOpticsOCh2ModTempLowThresh
1.3.6.1.4.1.2636.3.71.1.4.1.1.14
Integer32 · Celsius (0.01 degrees C)
Low module temerature in degree fahrenheit for a 15 minute period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
jnxOpticsOCh2TxPowHighThresh
1.3.6.1.4.1.2636.3.71.1.4.1.1.15
Integer32 · 0.01 dbm
Tx power for a 15 minute period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
jnxOpticsOCh2TxPowLowThresh
1.3.6.1.4.1.2636.3.71.1.4.1.1.16
Integer32 · 0.01 dbm
Tx Power for a 15 minute period below which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
jnxOpticsOCh2RxPowHighThresh
1.3.6.1.4.1.2636.3.71.1.4.1.1.17
Integer32 · 0.01 dbm
Rx power for a 15 minute period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
jnxOpticsOCh2RxPowLowThresh
1.3.6.1.4.1.2636.3.71.1.4.1.1.18
Integer32 · 0.01 dbm
Rx Power for a 15 minute period below which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
jnxOpticsOCh24HourModTemHiThresh
1.3.6.1.4.1.2636.3.71.1.4.1.1.19
Integer32 · Celsius (0.01 degrees C)
High module temerature in degree fahrenheit for a 24 hour period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
jnxOpticsOCh24HourModTemLoThresh
1.3.6.1.4.1.2636.3.71.1.4.1.1.20
Integer32 · Celsius (0.01 degrees C)
Low module temerature in degree fahrenheit for a 24 hour period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
jnxOpticsOCh24HourTxPowHiThresh
1.3.6.1.4.1.2636.3.71.1.4.1.1.21
Integer32 · 0.01 dbm
Tx power for a 24 hour period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
jnxOpticsOCh24HourTxPowLoThresh
1.3.6.1.4.1.2636.3.71.1.4.1.1.22
Integer32 · 0.01 dbm
Tx for a 24 hour period Power below which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
jnxOpticsOCh24HourRxPowHiThresh
1.3.6.1.4.1.2636.3.71.1.4.1.1.23
Integer32 · 0.01 dbm
Rx power for a 24 hour period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
jnxOpticsOCh24HourRxPowLoThresh
1.3.6.1.4.1.2636.3.71.1.4.1.1.24
Integer32 · 0.01 dbm
Rx Power for a 24 hour period below which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
jnxOpticsOCh2RxLosPowWarnThresh
1.3.6.1.4.1.2636.3.71.1.4.1.1.25
Integer32 · 0.01 dbm
Rx Power warning threshold for seeting the optical LOS warning.
jnxOpticsOCh2RxLosPowAlarmThresh
1.3.6.1.4.1.2636.3.71.1.4.1.1.26
Integer32 · 0.01 dbm
Rx Power alarm threshold for seeting the optical LOS warning.
jnxOpticsOCh2CurrentStatus
1.3.6.1.4.1.2636.3.71.1.4.1.1.27
BITS
jnxOpticsOCh2TxPowHiEnableTCA
1.3.6.1.4.1.2636.3.71.1.4.1.1.28
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
Enable/Disable for the Tx Power High TCA.
jnxOpticsOCh2TxPowLoEnableTCA
1.3.6.1.4.1.2636.3.71.1.4.1.1.29
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
Enable/Disable for the Tx Power Low TCA.
jnxOpticsOCh2RxPowHiEnableTCA
1.3.6.1.4.1.2636.3.71.1.4.1.1.30
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
Enable/Disable for the Rx Power High TCA.
jnxOpticsOCh2RxPowLoEnableTCA
1.3.6.1.4.1.2636.3.71.1.4.1.1.31
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
Enable/Disable for the Rx Power Low TCA.
jnxOpticsOCh2ModTempHiEnableTCA
1.3.6.1.4.1.2636.3.71.1.4.1.1.32
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
Enable/Disable for the Module Temp High TCA.
jnxOpticsOCh2ModTempLoEnableTCA
1.3.6.1.4.1.2636.3.71.1.4.1.1.33
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
Enable/Disable for the Module Temp Low TCA.
jnxOpticsOCh2CarFreqOffHiEnTCA
1.3.6.1.4.1.2636.3.71.1.4.1.1.34
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
Enable/Disable for the Carrier Frequency Offset High TCA.
jnxOpticsOCh2CarFreqOffLoEnTCA
1.3.6.1.4.1.2636.3.71.1.4.1.1.35
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
Enable/Disable for the CarrierFreqOffetLow TCA's.
jnxOpticsOCh2CarFreqOffHiThresh
1.3.6.1.4.1.2636.3.71.1.4.1.1.36
Integer32 · MHz
Carrier frequency offset for a 15 minute period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
jnxOpticsOCh24HourCarFreqOffHiTh
1.3.6.1.4.1.2636.3.71.1.4.1.1.37
Integer32 · MHz
Carrier frequency offset for a 24 Hour period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
jnxOpticsOCh2CarFreqOffLoThresh
1.3.6.1.4.1.2636.3.71.1.4.1.1.38
Integer32 · MHz
Carrier frequency offset for a 15 minute period Low which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
jnxOpticsOCh24HourCarFreqOffLoTh
1.3.6.1.4.1.2636.3.71.1.4.1.1.39
Integer32 · MHz
Carrier frequency offset for a 24 Hour period Low which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
jnxOpticsOCh2TraceToneCfgTable
1.3.6.1.4.1.2636.3.71.1.4.2
Index: jnxOpticsOCh2TraceToneCfgIndx · jnxOpticsOCh2TraceToneCfgL1Indx · jnxOpticsOCh2TraceToneCfgL2Indx · jnxOpticsOCh2TraceToneCfgL3Indx · jnxOpticsOCh2TraceToneCfgL4Indx
Table was for 48x10G/12x40G gingerALE PIC in 10G mode. It is not supported hence marked as obsolete. Information about the optics tests.
jnxOpticsOCh2TraceToneCfgIndx
1.3.6.1.4.1.2636.3.71.1.4.2.1.1
Integer32 (1..1024)
Container Index associated with this subject..
jnxOpticsOCh2TraceToneCfgL1Indx
1.3.6.1.4.1.2636.3.71.1.4.2.1.2
Integer32 (1..1024)
FPC Slot number of the interface.
jnxOpticsOCh2TraceToneCfgL2Indx
1.3.6.1.4.1.2636.3.71.1.4.2.1.3
Integer32 (1..1024)
PIC Slot number of the interface.
jnxOpticsOCh2TraceToneCfgL3Indx
1.3.6.1.4.1.2636.3.71.1.4.2.1.4
Integer32 (1..1024)
Port number of the interface.
jnxOpticsOCh2TraceToneCfgL4Indx
1.3.6.1.4.1.2636.3.71.1.4.2.1.5
Integer32 (1..1024)
Sub-Port number of the interface.
jnxOpticsOCh2TraceToneCfgTxEn
1.3.6.1.4.1.2636.3.71.1.4.2.1.6
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
This will enable/disable the transmit Trace tone feature.
jnxOpticsOCh2TraceToneCfgRxEn
1.3.6.1.4.1.2636.3.71.1.4.2.1.7
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
This will enable/disable the receive Trace tone feature.
jnxOpticsOCh2TraceToneCfgDestId
1.3.6.1.4.1.2636.3.71.1.4.2.1.8
OCTET STRING
This is the destination Id of the link ID/ the chassis and the blade. The transmit messages will also have the src id which is this chassis id and this port info.
jnxOpticsOCh2TraceToneCfgTxMsg
1.3.6.1.4.1.2636.3.71.1.4.2.1.9
OCTET STRING
This will be the transmit data in the tracetone message.
jnxOpticsOCh2TraceToneCfgRxMsg
1.3.6.1.4.1.2636.3.71.1.4.2.1.10
OCTET STRING
This will be the receive data in the trace tone message.
jnxIplcNotificationTable
1.3.6.1.4.1.2636.3.71.1.5.1
Index: jnxIplcNotificationSlot · jnxIplcNotificationChannel
A table of Notification entries.
jnxIplcNotificationLocation
1.3.6.1.4.1.2636.3.71.1.5.1.1.1
JnxOpticsLocation1 = jnxNearEnd2 = jnxFarEndNear End or Far End · Integer32
The object identifies indicates if this entry was for Near end/Far end.
jnxIplcNotificationDirection
1.3.6.1.4.1.2636.3.71.1.5.1.1.2
JnxOpticsDirection1 = jnxTxDir2 = jnxRxDir3 = jnxBiDirIndicates the direction as Rx/Tx or bi-directional. · Integer32
The object identifies indicates if this entry was for for the Tx/Rx or both.
jnxIplcNotificationSlot
1.3.6.1.4.1.2636.3.71.1.5.1.1.3
Integer32 (1..1024)
The object identifies indicates if this entry was for slot id.
jnxIplcNotificationChannel
1.3.6.1.4.1.2636.3.71.1.5.1.1.4
Integer32 (1..1024)
The object identifies indicates if this entry was for Channel id.
jnxIplcLastNotificationId
1.3.6.1.4.1.2636.3.71.1.5.1.1.5
JnxIplcNotificationId1 = jnxIplcFpcAwgAddLosAlarm2 = jnxIplcFpcExpInLosAlarm3 = jnxIplcFpcOscAddLosAlarm4 = jnxIplcFpcOscDrpLosAlarm5 = jnxIplcFpcLineInLosAlarm6 = jnxIplcFpcEdfa1RefPwAlarm7 = jnxIplcFpcEdfa1OutPwAlarm8 = jnxIplcFpcEdfa1OutGain9 = jnxIplcFpcEdfa1PumpEolAlarm10 = jnxIplcFpcEdfa1TempAlarm11 = jnxIplcFpcEdfa1OutLosAlarm12 = jnxIplcFpcEdfa1InLosAlarm13 = jnxIplcFpcEdfa2RefPwAlarm14 = jnxIplcFpcEdfa2OutPwAlarm15 = jnxIplcFpcEdfa2OutGainAlarm16 = jnxIplcFpcEdfa2PumpEolAlarm17 = jnxIplcFpcEdfa2TempAlarm18 = jnxIplcFpcEdfa2OutLosAlarm19 = jnxIplcFpcEdfa2InLosAlarm20 = jnxIplcFpcWssTempAlarm21 = jnxIplcFpcWssVoltAlarm22 = jnxIplcFpcInterDiagAlarm23 = jnxIplcFpcFwCnsistAlarm24 = jnxIplcFpcHwFailAlarm25 = jnxIplcFpcFwFailAlarm26 = jnxIplcFpcOcmFailAlarm27 = jnxIplcFpcWssFailAlarm28 = jnxIplcFpcEdfa2FailAlarm29 = jnxIplcFpcEdfa1FailAlarm30 = jnxIplcFpcPwrFailAlarm31 = jnxIplcOscTxPowerHigh15minAlert32 = jnxIplcOscTxPowerLow15minAlert33 = jnxIplcOscRxPowerHigh15minAlert34 = jnxIplcOscRxPowerLow15minAlert35 = jnxIplcOscFiberLosHigh15minAlert36 = jnxIplcOscFiberLosLow15minAlert37 = jnxIplcLineOutVoaHigh15minAlert38 = jnxIplcLineOutVoaLow15minAlert39 = jnxIplcIngressEdfaInputPwHigh15minAlert40 = jnxIplcIngressEdfaInputPwLow15minAlert41 = jnxIplcIngressEdfaOutputPwHigh15minAlert42 = jnxIplcIngressEdfaOutputPwLow15minAlert43 = jnxIplcIngressEdfaSignalPwHigh15minAlert44 = jnxIplcIngressEdfaSignalPwLow15minAlert45 = jnxIplcIngressEdfaPumpCurrentHigh15minAlert46 = jnxIplcIngressEdfaPumpCurrentLow15minAlert47 = jnxIplcEgressEdfaInputPwHigh15minAlert48 = jnxIplcEgressEdfaInputPwLow15minAlert49 = jnxIplcEgressEdfaOutputPwHigh15minAlert50 = jnxIplcEgressEdfaOutputPwLow15minAlert51 = jnxIplcEgressEdfaSignalPwHigh15minAlert52 = jnxIplcEgressEdfaSignalPwLow15minAlert53 = jnxIplcEgressEdfaPumpCurrentHigh15minAlert54 = jnxIplcEgressEdfaPumpCurrentLow15minAlert55 = jnxIplcPowerMonitorAwgAddHigh15minAlert56 = jnxIplcPowerMonitorAwgAddLow15minAlert57 = jnxIplcPowerMonitorExpressInHigh15minAlert58 = jnxIplcPowerMonitorExpressInLow15minAlert59 = jnxIplcOcmPwHigh15minAlert60 = jnxIplcOcmPwLow15minAlert61 = jnxIplcOscTxPowerHigh24hourAlert62 = jnxIplcOscTxPowerLow24hourAlert63 = jnxIplcOscRxPowerHigh24hourAlert64 = jnxIplcOscRxPowerLow24hourAlert65 = jnxIplcOscFiberLosHigh24hourAlert66 = jnxIplcOscFiberLosLow24hourAlert67 = jnxIplcLineOutVoaHigh24hourAlert68 = jnxIplcLineOutVoaLow24hourAlert69 = jnxIplcIngressEdfaInputPwHigh24hourAlert70 = jnxIplcIngressEdfaInputPwLow24hourAlert71 = jnxIplcIngressEdfaOutputPwHigh24hourAlert72 = jnxIplcIngressEdfaOutputPwLow24hourAlert73 = jnxIplcIngressEdfaSignalPwHigh24hourAlert74 = jnxIplcIngressEdfaSignalPwLow24hourAlert75 = jnxIplcIngressEdfaPumpCurrentHigh24hourAlert76 = jnxIplcIngressEdfaPumpCurrentLow24hourAlert77 = jnxIplcEgressEdfaInputPwHigh24hourAlert78 = jnxIplcEgressEdfaInputPwLow24hourAlert79 = jnxIplcEgressEdfaOutputPwHigh24hourAlert80 = jnxIplcEgressEdfaOutputPwLow24hourAlert81 = jnxIplcEgressEdfaSignalPwHigh24hourAlert82 = jnxIplcEgressEdfaSignalPwLow24hourAlert83 = jnxIplcEgressEdfaPumpCurrentHigh24hourAlert84 = jnxIplcEgressEdfaPumpCurrentLow24hourAlert85 = jnxIplcPowerMonitorAwgAddHigh24hourAlert86 = jnxIplcPowerMonitorAwgAddLow24hourAlert87 = jnxIplcPowerMonitorExpressInHigh24hourAlert88 = jnxIplcPowerMonitorExpressInLow24hourAlert89 = jnxIplcOcmPwHigh24hourAlert90 = jnxIplcOcmPwLow24hourAlert91 = jnxIplcFpcSfpLosAlarm92 = jnxIplcFpcSfpLofAlarmIplc alarm types · Integer32
The object identifies the IPLC alarm that most recently was set or cleared.
jnxIplcNotificationSeverity
1.3.6.1.4.1.2636.3.71.1.5.1.1.6
JnxOpticsSeverity1 = jnxCritical2 = jnxMajor3 = jnxMinor4 = jnxInfoSeverity of the Notification · Integer32
The object identifies the severity of the last alarm/alert that most recently was set or cleared.
jnxIplcNotificationDate
1.3.6.1.4.1.2636.3.71.1.5.1.1.7
DateAndTimeA date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC* 0..13 10 11 minutes from UTC 0..59 * Notes: - the value of year is in network-byte order - daylight saving time in New Zealand is +13 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 Note that if only local time is known, then timezone information (fields 8-10) is not present. SIZE (8 | 11) · OCTET STRING · hint 2d-1d-1d,1d:1d:1d.1d,1a1d:1d
This specifies the date and time when this alarm occurred.
jnxIlaNotificationTable
1.3.6.1.4.1.2636.3.71.1.6.1
Index: jnxIlaNotificationSlot · jnxIlaNotificationIlaID
A table of Notification entries.
jnxIlaNotificationLocation
1.3.6.1.4.1.2636.3.71.1.6.1.1.1
JnxOpticsLocation1 = jnxNearEnd2 = jnxFarEndNear End or Far End · Integer32
The object identifies indicates if this entry was for Near end/Far end.
jnxIlaNotificationDirection
1.3.6.1.4.1.2636.3.71.1.6.1.1.2
JnxOpticsDirection1 = jnxTxDir2 = jnxRxDir3 = jnxBiDirIndicates the direction as Rx/Tx or bi-directional. · Integer32
The object identifies indicates if this entry was for for the Tx/Rx or both.
jnxIlaNotificationSlot
1.3.6.1.4.1.2636.3.71.1.6.1.1.3
Integer32 (1..1024)
The object identifies indicates if this entry was for slot id.
jnxIlaNotificationIlaID
1.3.6.1.4.1.2636.3.71.1.6.1.1.4
Integer32 (1..1024)
The object identifies indicates if this entry was for the ILA id.
jnxIlaLastNotificationId
1.3.6.1.4.1.2636.3.71.1.6.1.1.5
JnxIlaNotificationId1 = jnxIlaBoardTemperatureAbnormalAlarm2 = jnxIlaPower0AbnormalAlarm3 = jnxIlaPower1AbnormalAlarm4 = jnxIlaFan0MissingAlarm5 = jnxIlaFan1MissingAlarm6 = jnxIlaFan2MissingAlarm7 = jnxIlaFan0SpeedAbnormalAlarm8 = jnxIlaFan1SpeedAbnormalAlarm9 = jnxIlaFan2SpeedAbnormalAlarm10 = jnxIlaSoftwareVersionAbnormalAlarm11 = jnxIlaCommunicationAbnormalAlarm12 = jnxIlaTableErrAlarm13 = jnxIlaEdfaEabCaseTemperatureAlarm14 = jnxIlaEdfaEabRFLAlarm15 = jnxIlaEdfaEabOOPAlarm16 = jnxIlaEdfaEabOOGAlarm17 = jnxIlaEdfaEabPump0EOLAlarm18 = jnxIlaEdfaEabPump1EOLAlarm19 = jnxIlaEdfaEabPump0TemperatureAlarm20 = jnxIlaEdfaEabPump1TemperatureAlarm21 = jnxIlaEdfaEabInputLOSAlarm22 = jnxIlaEdfaEabOutputLOSAlarm23 = jnxIlaEdfaEabCaliTableErrAlarm24 = jnxIlaEdfaEbaCaseTemperatureAlarm25 = jnxIlaEdfaEbaRFLAlarm26 = jnxIlaEdfaEbaOOPAlarm27 = jnxIlaEdfaEbaOOGAlarm28 = jnxIlaEdfaEbaPump0EOLAlarm29 = jnxIlaEdfaEbaPump1EOLAlarm30 = jnxIlaEdfaEbaPump0TemperatureAlarm31 = jnxIlaEdfaEbaPump1TemperatureAlarm32 = jnxIlaEdfaEbaInputLOSAlarm33 = jnxIlaEdfaEbaOutputLOSAlarm34 = jnxIlaEdfaEbaCaliTableErrAlarm35 = jnxIlaOscaAddPowerLOSAlarm36 = jnxIlaOscaDropPowerLOSAlarm37 = jnxIlaOscbAddPowerLOSAlarm38 = jnxIlaOscbDropPowerLOSAlarm39 = jnxIlaOscATxPwrLow15minAlert40 = jnxIlaOscATxPwrHigh15minAlert41 = jnxIlaOscARxPwrLow15minAlert42 = jnxIlaOscARxPwrHigh15minAlert43 = jnxIlaOscAFibLossLow15minAlert44 = jnxIlaOscAFibLossHigh15minAlert45 = jnxIlaVoaALineOutLow15minAlert46 = jnxIlaVoaALineOutHigh15minAlert47 = jnxIlaOscBTxPwrLow15minAlert48 = jnxIlaOscBTxPwrHigh15minAlert49 = jnxIlaOscBRxPwrLow15minAlert50 = jnxIlaOscBRxPwrHigh15minAlert51 = jnxIlaOscBFibLossLow15minAlert52 = jnxIlaOscBFibLossHigh15minAlert53 = jnxIlaVoaBLineOutLow15minAlert54 = jnxIlaVoaBLineOutHigh15minAlert55 = jnxIlaEdfaABInputPwrLow15minAlert56 = jnxIlaEdfaABInputPwrHigh15minAlert57 = jnxIlaEdfaABOutputPwrLow15minAlert58 = jnxIlaEdfaABOutputPwrHigh15minAlert59 = jnxIlaEdfaABPump0CurLow15minAlert60 = jnxIlaEdfaABPump0CurHigh15minAlert61 = jnxIlaEdfaABPump1CurLow15minAlert62 = jnxIlaEdfaABPump1CurHigh15minAlert63 = jnxIlaEdfaABPump0TempLow15minAlert64 = jnxIlaEdfaABPump0TempHigh15minAlert65 = jnxIlaEdfaABPump1TempLow15minAlert66 = jnxIlaEdfaABPump1TempHigh15minAlert67 = jnxIlaEdfaBAInputPwrLow15minAlert68 = jnxIlaEdfaBAInputPwrHigh15minAlert69 = jnxIlaEdfaBAOutputPwrLow15minAlert70 = jnxIlaEdfaBAOutputPwrHigh15minAlert71 = jnxIlaEdfaBAPump0CurLow15minAlert72 = jnxIlaEdfaBAPump0CurHigh15minAlert73 = jnxIlaEdfaBAPump1CurLow15minAlert74 = jnxIlaEdfaBAPump1CurHigh15minAlert75 = jnxIlaEdfaBAPump0TempLow15minAlert76 = jnxIlaEdfaBAPump0TempHigh15minAlert77 = jnxIlaEdfaBAPump1TempLow15minAlert78 = jnxIlaEdfaBAPump1TempHigh15minAlert79 = jnxIla24HourOscATxPwrLowAlert80 = jnxIla24HourOscATxPwrHighAlert81 = jnxIla24HourOscARxPwrLowAlert82 = jnxIla24HourOscARxPwrHighAlert83 = jnxIla24HourOscAFibLossLowAlert84 = jnxIla24HourOscAFibLossHighAlert85 = jnxIla24HourVoaALineOutLowAlert86 = jnxIla24HourVoaALineOutHighAlert87 = jnxIla24HourOscBTxPwrLowAlert88 = jnxIla24HourOscBTxPwrHighAlert89 = jnxIla24HourOscBRxPwrLowAlert90 = jnxIla24HourOscBRxPwrHighAlert91 = jnxIla24HourOscBFibLossLowAlert92 = jnxIla24HourOscBFibLossHighAlert93 = jnxIla24HourVoaBLineOutLowAlert94 = jnxIla24HourVoaBLineOutHighAlert95 = jnxIla24HourEdfaABInputPwrLowAlert96 = jnxIla24HourEdfaABInputPwrHighAlert97 = jnxIla24HourEdfaABOutputPwrLowAlert98 = jnxIla24HourEdfaABOutputPwrHighAlert99 = jnxIla24HourEdfaABPump0CurLowAlert100 = jnxIla24HourEdfaABPump0CurHighAlert101 = jnxIla24HourEdfaABPump1CurLowAlert102 = jnxIla24HourEdfaABPump1CurHighAlert103 = jnxIla24HourEdfaABPump0TempLowAlert104 = jnxIla24HourEdfaABPump0TempHighAlert105 = jnxIla24HourEdfaABPump1TempLowAlert106 = jnxIla24HourEdfaABPump1TempHighAlert107 = jnxIla24HourEdfaBAInputPwrLowAlert108 = jnxIla24HourEdfaBAInputPwrHighAlert109 = jnxIla24HourEdfaBAOutputPwrLowAlert110 = jnxIla24HourEdfaBAOutputPwrHighAlert111 = jnxIla24HourEdfaBAPump0CurLowAlert112 = jnxIla24HourEdfaBAPump0CurHighAlert113 = jnxIla24HourEdfaBAPump1CurLowAlert114 = jnxIla24HourEdfaBAPump1CurHighAlert115 = jnxIla24HourEdfaBAPump0TempLowAlert116 = jnxIla24HourEdfaBAPump0TempHighAlert117 = jnxIla24HourEdfaBAPump1TempLowAlert118 = jnxIla24HourEdfaBAPump1TempHighAlert119 = jnxIlaEdfaABSignalPwrLow15minAlert120 = jnxIlaEdfaABSignalPwrHigh15minAlert121 = jnxIla24HourEdfaABSignalPwrLowAlert122 = jnxIla24HourEdfaABSignalPwrHighAlert123 = jnxIlaEdfaBASignalPwrLow15minAlert124 = jnxIlaEdfaBASignalPwrHigh15minAlert125 = jnxIla24HourEdfaBASignalPwrLowAlert126 = jnxIla24HourEdfaBASignalPwrHighAlert127 = jnxIlaEdfaABGainRangeErrAlarm128 = jnxIlaEdfaBAGainRangeErrAlarmIla alarm types · Integer32
The object identifies the Ila alarm that most recently was set or cleared.
jnxIlaNotificationSeverity
1.3.6.1.4.1.2636.3.71.1.6.1.1.6
JnxOpticsSeverity1 = jnxCritical2 = jnxMajor3 = jnxMinor4 = jnxInfoSeverity of the Notification · Integer32
The object identifies the severity of the last alarm/alert that most recently was set or cleared.
jnxIlaNotificationDate
1.3.6.1.4.1.2636.3.71.1.6.1.1.7
DateAndTimeA date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC* 0..13 10 11 minutes from UTC 0..59 * Notes: - the value of year is in network-byte order - daylight saving time in New Zealand is +13 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 Note that if only local time is known, then timezone information (fields 8-10) is not present. SIZE (8 | 11) · OCTET STRING · hint 2d-1d-1d,1d:1d:1d.1d,1a1d:1d
This specifies the date and time when this alarm occurred.
Trap details
jnxOpticsNotificationSet
1.3.6.1.4.1.2636.4.22.0.1
Notification of a recently set optics alarm.
jnxOpticsNotificationLocation
1.3.6.1.4.1.2636.3.71.1.3.1.1.1
JnxOpticsLocation1 = jnxNearEnd2 = jnxFarEndNear End or Far End · Integer32
The object identifies indicates if this entry was for Near end/Far end.
jnxOpticsNotificationDirection
1.3.6.1.4.1.2636.3.71.1.3.1.1.2
JnxOpticsDirection1 = jnxTxDir2 = jnxRxDir3 = jnxBiDirIndicates the direction as Rx/Tx or bi-directional. · Integer32
The object identifies indicates if this entry was for for the Tx/Rx or both.
ifDescr
1.3.6.1.2.1.2.2.1.2
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the interface hardware/software.
jnxOpticsLastNotificationId
1.3.6.1.4.1.2636.3.71.1.3.1.1.3
JnxOpticsNotificationId1 = jnxOpticsLOS2 = jnxOpticsWavelenthLockErr3 = jnxOpticsPowerHighAlarm4 = jnxOpticsPowerLowAlarm5 = jnxOpticsBiasCurrentHighAlarm6 = jnxOpticsBiasCurrentLowAlarm7 = jnxOpticsTemperatureHighAlarm8 = jnxOpticsTemperaturelowAlarm9 = jnxOpticsTxPLLLockAlarm10 = jnxOpticsRxPLLLockAlarm11 = jnxOpticsAvgPowerAlarm12 = jnxOpticsRxLossAvgPowerAlarm13 = jnxOpticsLossofACPowerAlarm14 = jnxOpticsTxPowerHighThreshAlert15 = jnxOpticsTxPowerLowThreshAlert16 = jnxOpticsRxPowerHighThreshAlert17 = jnxOpticsRxPowerLowThreshAlert18 = jnxOpticsModuleTempHighThreshAlert19 = jnxOpticsModuleTempLowThreshAlert20 = jnxOptics24HourTxPowerHighThreshAlert21 = jnxOptics24HourTxPowerLowThreshAlert22 = jnxOptics24HourRxPowerHighThreshAlert23 = jnxOptics24HourRxPowerLowThreshAlert24 = jnxOptics24HourModuleTempHighThreshAlert25 = jnxOptics24HourModuleTempLowThreshAlert26 = jnxOpticsRxPowerHighAlarm27 = jnxOpticsRxPowerLowAlarm28 = jnxOpticsTxPowerHighWarning29 = jnxOpticsTxPowerLowWarning30 = jnxOpticsRxPowerHighWarning31 = jnxOpticsRxPowerLowWarning32 = jnxOpticsModuleTempHighWarning33 = jnxOpticsModuleTempLowWarning34 = jnxOpticsRxCarrierFreqHigh35 = jnxOpticsRxCarrierFreqLow36 = jnxOpticsChromaticDispHighWarning37 = jnxOpticsChromaticDispLowWarning38 = jnxOpticsQLowWarning39 = jnxOpticsOSNRLowWarning40 = jnxOpticsCarrierFreqHighAlert41 = jnxOpticsCarrierFreqLowAlert42 = jnxOptics24HourCarrierFreqHighAlert43 = jnxOptics24HourCarrierFreqLowAlert44 = jnxOpticsLossOfLock45 = jnxOpticsLossOfSignal46 = jnxOpticsLossOfFrame47 = jnxOpticsLossOfMultiFrame48 = jnxOpticsOTUBDI49 = jnxOpticsRxModemSYncFault50 = jnxOpticsRxModemLOL51 = jnxOpticsRxLOA52 = jnxOpticsModBiasControlLoopFail53 = jnxOpticsILTAfault54 = jnxOpticsDACcalibrationfault55 = jnxOpticsADCcalibrationfault56 = jnxOpticsTecCurrentHighAlert57 = jnxOpticsTecCurrentLowAlert58 = jnxOpticsPamHistogramHighAlert59 = jnxOpticsResidualIsiHighAlert60 = jnxOpticsResidualIsiLowAlert61 = jnxOpticsFecCorrectedErrorsHighAlert62 = jnxOpticsFecUCorrectedWordsHighAlert63 = jnxOptics24HourTecCurrentHighAlert64 = jnxOptics24HourTecCurrentLowAlert65 = jnxOptics24HourPamHistogramHighAlert66 = jnxOptics24HourResidualIsiHighAlert67 = jnxOptics24HourResidualIsiLowAlert68 = jnxOptics24HourFecCorrectedErrorsHighAlert69 = jnxOptics24HourFecUCorrectedWordsHighAlert70 = jnxOpticsLaserFreqErrorHighAlert71 = jnxOpticsLaserFreqErrorLowAlert72 = jnxOptics24HourLaserFreqErrorHighAlert73 = jnxOptics24HourLaserFreqErrorLowAlert74 = jnxOpticsSnrLowAlert75 = jnxOptics24HourSnrLowAlert76 = jnxOpticsPreFecBERHighAlert77 = jnxOptics24HourPreFecBERHignAlert78 = jnxOpticsRxSignalPowerHighThreshAlert79 = jnxOpticsRxSignalPowerLowThreshAlert80 = jnxOptics24HourRxSignalPowerHighThreshAlert81 = jnxOptics24HourRxSignalPowerLowThreshAlertOptic alarm types · Integer32
The object identifies the OTN alarm that most recently was set or cleared.
jnxOpticsNotificationSeverity
1.3.6.1.4.1.2636.3.71.1.3.1.1.4
JnxOpticsSeverity1 = jnxCritical2 = jnxMajor3 = jnxMinor4 = jnxInfoSeverity of the Notification · Integer32
The object identifies the severity of the last alarm/alert that most recently was set or cleared.
jnxOpticsNotificationDate
1.3.6.1.4.1.2636.3.71.1.3.1.1.5
DateAndTimeA date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC* 0..13 10 11 minutes from UTC 0..59 * Notes: - the value of year is in network-byte order - daylight saving time in New Zealand is +13 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 Note that if only local time is known, then timezone information (fields 8-10) is not present. SIZE (8 | 11) · OCTET STRING · hint 2d-1d-1d,1d:1d:1d.1d,1a1d:1d
This specifies the date and time when this alarm occurred.
jnxOpticsNotificationLaneIndex
1.3.6.1.4.1.2636.3.71.1.3.1.1.6
Integer32 (1..1024)
The lane index associated with this subject.. eg port.
jnxOpticsNotificationCleared
1.3.6.1.4.1.2636.4.22.0.2
Notification of a recently cleared optics alarm.
jnxOpticsNotificationLocation
1.3.6.1.4.1.2636.3.71.1.3.1.1.1
JnxOpticsLocation1 = jnxNearEnd2 = jnxFarEndNear End or Far End · Integer32
The object identifies indicates if this entry was for Near end/Far end.
jnxOpticsNotificationDirection
1.3.6.1.4.1.2636.3.71.1.3.1.1.2
JnxOpticsDirection1 = jnxTxDir2 = jnxRxDir3 = jnxBiDirIndicates the direction as Rx/Tx or bi-directional. · Integer32
The object identifies indicates if this entry was for for the Tx/Rx or both.
ifDescr
1.3.6.1.2.1.2.2.1.2
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the interface hardware/software.
jnxOpticsLastNotificationId
1.3.6.1.4.1.2636.3.71.1.3.1.1.3
JnxOpticsNotificationId1 = jnxOpticsLOS2 = jnxOpticsWavelenthLockErr3 = jnxOpticsPowerHighAlarm4 = jnxOpticsPowerLowAlarm5 = jnxOpticsBiasCurrentHighAlarm6 = jnxOpticsBiasCurrentLowAlarm7 = jnxOpticsTemperatureHighAlarm8 = jnxOpticsTemperaturelowAlarm9 = jnxOpticsTxPLLLockAlarm10 = jnxOpticsRxPLLLockAlarm11 = jnxOpticsAvgPowerAlarm12 = jnxOpticsRxLossAvgPowerAlarm13 = jnxOpticsLossofACPowerAlarm14 = jnxOpticsTxPowerHighThreshAlert15 = jnxOpticsTxPowerLowThreshAlert16 = jnxOpticsRxPowerHighThreshAlert17 = jnxOpticsRxPowerLowThreshAlert18 = jnxOpticsModuleTempHighThreshAlert19 = jnxOpticsModuleTempLowThreshAlert20 = jnxOptics24HourTxPowerHighThreshAlert21 = jnxOptics24HourTxPowerLowThreshAlert22 = jnxOptics24HourRxPowerHighThreshAlert23 = jnxOptics24HourRxPowerLowThreshAlert24 = jnxOptics24HourModuleTempHighThreshAlert25 = jnxOptics24HourModuleTempLowThreshAlert26 = jnxOpticsRxPowerHighAlarm27 = jnxOpticsRxPowerLowAlarm28 = jnxOpticsTxPowerHighWarning29 = jnxOpticsTxPowerLowWarning30 = jnxOpticsRxPowerHighWarning31 = jnxOpticsRxPowerLowWarning32 = jnxOpticsModuleTempHighWarning33 = jnxOpticsModuleTempLowWarning34 = jnxOpticsRxCarrierFreqHigh35 = jnxOpticsRxCarrierFreqLow36 = jnxOpticsChromaticDispHighWarning37 = jnxOpticsChromaticDispLowWarning38 = jnxOpticsQLowWarning39 = jnxOpticsOSNRLowWarning40 = jnxOpticsCarrierFreqHighAlert41 = jnxOpticsCarrierFreqLowAlert42 = jnxOptics24HourCarrierFreqHighAlert43 = jnxOptics24HourCarrierFreqLowAlert44 = jnxOpticsLossOfLock45 = jnxOpticsLossOfSignal46 = jnxOpticsLossOfFrame47 = jnxOpticsLossOfMultiFrame48 = jnxOpticsOTUBDI49 = jnxOpticsRxModemSYncFault50 = jnxOpticsRxModemLOL51 = jnxOpticsRxLOA52 = jnxOpticsModBiasControlLoopFail53 = jnxOpticsILTAfault54 = jnxOpticsDACcalibrationfault55 = jnxOpticsADCcalibrationfault56 = jnxOpticsTecCurrentHighAlert57 = jnxOpticsTecCurrentLowAlert58 = jnxOpticsPamHistogramHighAlert59 = jnxOpticsResidualIsiHighAlert60 = jnxOpticsResidualIsiLowAlert61 = jnxOpticsFecCorrectedErrorsHighAlert62 = jnxOpticsFecUCorrectedWordsHighAlert63 = jnxOptics24HourTecCurrentHighAlert64 = jnxOptics24HourTecCurrentLowAlert65 = jnxOptics24HourPamHistogramHighAlert66 = jnxOptics24HourResidualIsiHighAlert67 = jnxOptics24HourResidualIsiLowAlert68 = jnxOptics24HourFecCorrectedErrorsHighAlert69 = jnxOptics24HourFecUCorrectedWordsHighAlert70 = jnxOpticsLaserFreqErrorHighAlert71 = jnxOpticsLaserFreqErrorLowAlert72 = jnxOptics24HourLaserFreqErrorHighAlert73 = jnxOptics24HourLaserFreqErrorLowAlert74 = jnxOpticsSnrLowAlert75 = jnxOptics24HourSnrLowAlert76 = jnxOpticsPreFecBERHighAlert77 = jnxOptics24HourPreFecBERHignAlert78 = jnxOpticsRxSignalPowerHighThreshAlert79 = jnxOpticsRxSignalPowerLowThreshAlert80 = jnxOptics24HourRxSignalPowerHighThreshAlert81 = jnxOptics24HourRxSignalPowerLowThreshAlertOptic alarm types · Integer32
The object identifies the OTN alarm that most recently was set or cleared.
jnxOpticsNotificationSeverity
1.3.6.1.4.1.2636.3.71.1.3.1.1.4
JnxOpticsSeverity1 = jnxCritical2 = jnxMajor3 = jnxMinor4 = jnxInfoSeverity of the Notification · Integer32
The object identifies the severity of the last alarm/alert that most recently was set or cleared.
jnxOpticsNotificationDate
1.3.6.1.4.1.2636.3.71.1.3.1.1.5
DateAndTimeA date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC* 0..13 10 11 minutes from UTC 0..59 * Notes: - the value of year is in network-byte order - daylight saving time in New Zealand is +13 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 Note that if only local time is known, then timezone information (fields 8-10) is not present. SIZE (8 | 11) · OCTET STRING · hint 2d-1d-1d,1d:1d:1d.1d,1a1d:1d
This specifies the date and time when this alarm occurred.
jnxOpticsNotificationLaneIndex
1.3.6.1.4.1.2636.3.71.1.3.1.1.6
Integer32 (1..1024)
The lane index associated with this subject.. eg port.
jnxIfOpticsNotificationAdminStatus
1.3.6.1.4.1.2636.4.22.0.3
Notification of the admin state of the optics interface.
ifDescr
1.3.6.1.2.1.2.2.1.2
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the interface hardware/software.
jnxOpticsOTIfAdminState
1.3.6.1.4.1.2636.3.71.1.1.8.1.9
JnxOpticsOTIfAdminStates1 = jnxAdminStateInService2 = jnxAdminStateInServiceMA3 = jnxAdminStateOutofService4 = jnxAdminStateOutofServiceMAAdmin states for an interface · Integer32
The Admin state of this interface
jnxIfOpticsNotificationOperStatus
1.3.6.1.4.1.2636.4.22.0.4
Notification of operational state of the optics interface
ifDescr
1.3.6.1.2.1.2.2.1.2
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the interface hardware/software.
jnxOpticsOTIfOperState
1.3.6.1.4.1.2636.3.71.1.1.8.1.10
JnxOpticsOTIfOperStates1 = jnxOperStateInit2 = jnxOperStateNormal3 = jnxOperStateFault4 = jnxOperStateDegradedOperational states for an interface · Integer32
The operational state of this interface
jnxIplcNotificationSet
1.3.6.1.4.1.2636.4.28.0.1
Notification of a recently set iplc alarm.
jnxIplcNotificationLocation
1.3.6.1.4.1.2636.3.71.1.5.1.1.1
JnxOpticsLocation1 = jnxNearEnd2 = jnxFarEndNear End or Far End · Integer32
The object identifies indicates if this entry was for Near end/Far end.
jnxIplcNotificationDirection
1.3.6.1.4.1.2636.3.71.1.5.1.1.2
JnxOpticsDirection1 = jnxTxDir2 = jnxRxDir3 = jnxBiDirIndicates the direction as Rx/Tx or bi-directional. · Integer32
The object identifies indicates if this entry was for for the Tx/Rx or both.
jnxIplcNotificationSlot
1.3.6.1.4.1.2636.3.71.1.5.1.1.3
Integer32 (1..1024)
The object identifies indicates if this entry was for slot id.
jnxIplcNotificationChannel
1.3.6.1.4.1.2636.3.71.1.5.1.1.4
Integer32 (1..1024)
The object identifies indicates if this entry was for Channel id.
jnxIplcLastNotificationId
1.3.6.1.4.1.2636.3.71.1.5.1.1.5
JnxIplcNotificationId1 = jnxIplcFpcAwgAddLosAlarm2 = jnxIplcFpcExpInLosAlarm3 = jnxIplcFpcOscAddLosAlarm4 = jnxIplcFpcOscDrpLosAlarm5 = jnxIplcFpcLineInLosAlarm6 = jnxIplcFpcEdfa1RefPwAlarm7 = jnxIplcFpcEdfa1OutPwAlarm8 = jnxIplcFpcEdfa1OutGain9 = jnxIplcFpcEdfa1PumpEolAlarm10 = jnxIplcFpcEdfa1TempAlarm11 = jnxIplcFpcEdfa1OutLosAlarm12 = jnxIplcFpcEdfa1InLosAlarm13 = jnxIplcFpcEdfa2RefPwAlarm14 = jnxIplcFpcEdfa2OutPwAlarm15 = jnxIplcFpcEdfa2OutGainAlarm16 = jnxIplcFpcEdfa2PumpEolAlarm17 = jnxIplcFpcEdfa2TempAlarm18 = jnxIplcFpcEdfa2OutLosAlarm19 = jnxIplcFpcEdfa2InLosAlarm20 = jnxIplcFpcWssTempAlarm21 = jnxIplcFpcWssVoltAlarm22 = jnxIplcFpcInterDiagAlarm23 = jnxIplcFpcFwCnsistAlarm24 = jnxIplcFpcHwFailAlarm25 = jnxIplcFpcFwFailAlarm26 = jnxIplcFpcOcmFailAlarm27 = jnxIplcFpcWssFailAlarm28 = jnxIplcFpcEdfa2FailAlarm29 = jnxIplcFpcEdfa1FailAlarm30 = jnxIplcFpcPwrFailAlarm31 = jnxIplcOscTxPowerHigh15minAlert32 = jnxIplcOscTxPowerLow15minAlert33 = jnxIplcOscRxPowerHigh15minAlert34 = jnxIplcOscRxPowerLow15minAlert35 = jnxIplcOscFiberLosHigh15minAlert36 = jnxIplcOscFiberLosLow15minAlert37 = jnxIplcLineOutVoaHigh15minAlert38 = jnxIplcLineOutVoaLow15minAlert39 = jnxIplcIngressEdfaInputPwHigh15minAlert40 = jnxIplcIngressEdfaInputPwLow15minAlert41 = jnxIplcIngressEdfaOutputPwHigh15minAlert42 = jnxIplcIngressEdfaOutputPwLow15minAlert43 = jnxIplcIngressEdfaSignalPwHigh15minAlert44 = jnxIplcIngressEdfaSignalPwLow15minAlert45 = jnxIplcIngressEdfaPumpCurrentHigh15minAlert46 = jnxIplcIngressEdfaPumpCurrentLow15minAlert47 = jnxIplcEgressEdfaInputPwHigh15minAlert48 = jnxIplcEgressEdfaInputPwLow15minAlert49 = jnxIplcEgressEdfaOutputPwHigh15minAlert50 = jnxIplcEgressEdfaOutputPwLow15minAlert51 = jnxIplcEgressEdfaSignalPwHigh15minAlert52 = jnxIplcEgressEdfaSignalPwLow15minAlert53 = jnxIplcEgressEdfaPumpCurrentHigh15minAlert54 = jnxIplcEgressEdfaPumpCurrentLow15minAlert55 = jnxIplcPowerMonitorAwgAddHigh15minAlert56 = jnxIplcPowerMonitorAwgAddLow15minAlert57 = jnxIplcPowerMonitorExpressInHigh15minAlert58 = jnxIplcPowerMonitorExpressInLow15minAlert59 = jnxIplcOcmPwHigh15minAlert60 = jnxIplcOcmPwLow15minAlert61 = jnxIplcOscTxPowerHigh24hourAlert62 = jnxIplcOscTxPowerLow24hourAlert63 = jnxIplcOscRxPowerHigh24hourAlert64 = jnxIplcOscRxPowerLow24hourAlert65 = jnxIplcOscFiberLosHigh24hourAlert66 = jnxIplcOscFiberLosLow24hourAlert67 = jnxIplcLineOutVoaHigh24hourAlert68 = jnxIplcLineOutVoaLow24hourAlert69 = jnxIplcIngressEdfaInputPwHigh24hourAlert70 = jnxIplcIngressEdfaInputPwLow24hourAlert71 = jnxIplcIngressEdfaOutputPwHigh24hourAlert72 = jnxIplcIngressEdfaOutputPwLow24hourAlert73 = jnxIplcIngressEdfaSignalPwHigh24hourAlert74 = jnxIplcIngressEdfaSignalPwLow24hourAlert75 = jnxIplcIngressEdfaPumpCurrentHigh24hourAlert76 = jnxIplcIngressEdfaPumpCurrentLow24hourAlert77 = jnxIplcEgressEdfaInputPwHigh24hourAlert78 = jnxIplcEgressEdfaInputPwLow24hourAlert79 = jnxIplcEgressEdfaOutputPwHigh24hourAlert80 = jnxIplcEgressEdfaOutputPwLow24hourAlert81 = jnxIplcEgressEdfaSignalPwHigh24hourAlert82 = jnxIplcEgressEdfaSignalPwLow24hourAlert83 = jnxIplcEgressEdfaPumpCurrentHigh24hourAlert84 = jnxIplcEgressEdfaPumpCurrentLow24hourAlert85 = jnxIplcPowerMonitorAwgAddHigh24hourAlert86 = jnxIplcPowerMonitorAwgAddLow24hourAlert87 = jnxIplcPowerMonitorExpressInHigh24hourAlert88 = jnxIplcPowerMonitorExpressInLow24hourAlert89 = jnxIplcOcmPwHigh24hourAlert90 = jnxIplcOcmPwLow24hourAlert91 = jnxIplcFpcSfpLosAlarm92 = jnxIplcFpcSfpLofAlarmIplc alarm types · Integer32
The object identifies the IPLC alarm that most recently was set or cleared.
jnxIplcNotificationSeverity
1.3.6.1.4.1.2636.3.71.1.5.1.1.6
JnxOpticsSeverity1 = jnxCritical2 = jnxMajor3 = jnxMinor4 = jnxInfoSeverity of the Notification · Integer32
The object identifies the severity of the last alarm/alert that most recently was set or cleared.
jnxIplcNotificationDate
1.3.6.1.4.1.2636.3.71.1.5.1.1.7
DateAndTimeA date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC* 0..13 10 11 minutes from UTC 0..59 * Notes: - the value of year is in network-byte order - daylight saving time in New Zealand is +13 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 Note that if only local time is known, then timezone information (fields 8-10) is not present. SIZE (8 | 11) · OCTET STRING · hint 2d-1d-1d,1d:1d:1d.1d,1a1d:1d
This specifies the date and time when this alarm occurred.
jnxIplcNotificationCleared
1.3.6.1.4.1.2636.4.28.0.2
Notification of a recently cleared iplc alarm.
jnxIplcNotificationLocation
1.3.6.1.4.1.2636.3.71.1.5.1.1.1
JnxOpticsLocation1 = jnxNearEnd2 = jnxFarEndNear End or Far End · Integer32
The object identifies indicates if this entry was for Near end/Far end.
jnxIplcNotificationDirection
1.3.6.1.4.1.2636.3.71.1.5.1.1.2
JnxOpticsDirection1 = jnxTxDir2 = jnxRxDir3 = jnxBiDirIndicates the direction as Rx/Tx or bi-directional. · Integer32
The object identifies indicates if this entry was for for the Tx/Rx or both.
jnxIplcNotificationSlot
1.3.6.1.4.1.2636.3.71.1.5.1.1.3
Integer32 (1..1024)
The object identifies indicates if this entry was for slot id.
jnxIplcNotificationChannel
1.3.6.1.4.1.2636.3.71.1.5.1.1.4
Integer32 (1..1024)
The object identifies indicates if this entry was for Channel id.
jnxIplcLastNotificationId
1.3.6.1.4.1.2636.3.71.1.5.1.1.5
JnxIplcNotificationId1 = jnxIplcFpcAwgAddLosAlarm2 = jnxIplcFpcExpInLosAlarm3 = jnxIplcFpcOscAddLosAlarm4 = jnxIplcFpcOscDrpLosAlarm5 = jnxIplcFpcLineInLosAlarm6 = jnxIplcFpcEdfa1RefPwAlarm7 = jnxIplcFpcEdfa1OutPwAlarm8 = jnxIplcFpcEdfa1OutGain9 = jnxIplcFpcEdfa1PumpEolAlarm10 = jnxIplcFpcEdfa1TempAlarm11 = jnxIplcFpcEdfa1OutLosAlarm12 = jnxIplcFpcEdfa1InLosAlarm13 = jnxIplcFpcEdfa2RefPwAlarm14 = jnxIplcFpcEdfa2OutPwAlarm15 = jnxIplcFpcEdfa2OutGainAlarm16 = jnxIplcFpcEdfa2PumpEolAlarm17 = jnxIplcFpcEdfa2TempAlarm18 = jnxIplcFpcEdfa2OutLosAlarm19 = jnxIplcFpcEdfa2InLosAlarm20 = jnxIplcFpcWssTempAlarm21 = jnxIplcFpcWssVoltAlarm22 = jnxIplcFpcInterDiagAlarm23 = jnxIplcFpcFwCnsistAlarm24 = jnxIplcFpcHwFailAlarm25 = jnxIplcFpcFwFailAlarm26 = jnxIplcFpcOcmFailAlarm27 = jnxIplcFpcWssFailAlarm28 = jnxIplcFpcEdfa2FailAlarm29 = jnxIplcFpcEdfa1FailAlarm30 = jnxIplcFpcPwrFailAlarm31 = jnxIplcOscTxPowerHigh15minAlert32 = jnxIplcOscTxPowerLow15minAlert33 = jnxIplcOscRxPowerHigh15minAlert34 = jnxIplcOscRxPowerLow15minAlert35 = jnxIplcOscFiberLosHigh15minAlert36 = jnxIplcOscFiberLosLow15minAlert37 = jnxIplcLineOutVoaHigh15minAlert38 = jnxIplcLineOutVoaLow15minAlert39 = jnxIplcIngressEdfaInputPwHigh15minAlert40 = jnxIplcIngressEdfaInputPwLow15minAlert41 = jnxIplcIngressEdfaOutputPwHigh15minAlert42 = jnxIplcIngressEdfaOutputPwLow15minAlert43 = jnxIplcIngressEdfaSignalPwHigh15minAlert44 = jnxIplcIngressEdfaSignalPwLow15minAlert45 = jnxIplcIngressEdfaPumpCurrentHigh15minAlert46 = jnxIplcIngressEdfaPumpCurrentLow15minAlert47 = jnxIplcEgressEdfaInputPwHigh15minAlert48 = jnxIplcEgressEdfaInputPwLow15minAlert49 = jnxIplcEgressEdfaOutputPwHigh15minAlert50 = jnxIplcEgressEdfaOutputPwLow15minAlert51 = jnxIplcEgressEdfaSignalPwHigh15minAlert52 = jnxIplcEgressEdfaSignalPwLow15minAlert53 = jnxIplcEgressEdfaPumpCurrentHigh15minAlert54 = jnxIplcEgressEdfaPumpCurrentLow15minAlert55 = jnxIplcPowerMonitorAwgAddHigh15minAlert56 = jnxIplcPowerMonitorAwgAddLow15minAlert57 = jnxIplcPowerMonitorExpressInHigh15minAlert58 = jnxIplcPowerMonitorExpressInLow15minAlert59 = jnxIplcOcmPwHigh15minAlert60 = jnxIplcOcmPwLow15minAlert61 = jnxIplcOscTxPowerHigh24hourAlert62 = jnxIplcOscTxPowerLow24hourAlert63 = jnxIplcOscRxPowerHigh24hourAlert64 = jnxIplcOscRxPowerLow24hourAlert65 = jnxIplcOscFiberLosHigh24hourAlert66 = jnxIplcOscFiberLosLow24hourAlert67 = jnxIplcLineOutVoaHigh24hourAlert68 = jnxIplcLineOutVoaLow24hourAlert69 = jnxIplcIngressEdfaInputPwHigh24hourAlert70 = jnxIplcIngressEdfaInputPwLow24hourAlert71 = jnxIplcIngressEdfaOutputPwHigh24hourAlert72 = jnxIplcIngressEdfaOutputPwLow24hourAlert73 = jnxIplcIngressEdfaSignalPwHigh24hourAlert74 = jnxIplcIngressEdfaSignalPwLow24hourAlert75 = jnxIplcIngressEdfaPumpCurrentHigh24hourAlert76 = jnxIplcIngressEdfaPumpCurrentLow24hourAlert77 = jnxIplcEgressEdfaInputPwHigh24hourAlert78 = jnxIplcEgressEdfaInputPwLow24hourAlert79 = jnxIplcEgressEdfaOutputPwHigh24hourAlert80 = jnxIplcEgressEdfaOutputPwLow24hourAlert81 = jnxIplcEgressEdfaSignalPwHigh24hourAlert82 = jnxIplcEgressEdfaSignalPwLow24hourAlert83 = jnxIplcEgressEdfaPumpCurrentHigh24hourAlert84 = jnxIplcEgressEdfaPumpCurrentLow24hourAlert85 = jnxIplcPowerMonitorAwgAddHigh24hourAlert86 = jnxIplcPowerMonitorAwgAddLow24hourAlert87 = jnxIplcPowerMonitorExpressInHigh24hourAlert88 = jnxIplcPowerMonitorExpressInLow24hourAlert89 = jnxIplcOcmPwHigh24hourAlert90 = jnxIplcOcmPwLow24hourAlert91 = jnxIplcFpcSfpLosAlarm92 = jnxIplcFpcSfpLofAlarmIplc alarm types · Integer32
The object identifies the IPLC alarm that most recently was set or cleared.
jnxIplcNotificationSeverity
1.3.6.1.4.1.2636.3.71.1.5.1.1.6
JnxOpticsSeverity1 = jnxCritical2 = jnxMajor3 = jnxMinor4 = jnxInfoSeverity of the Notification · Integer32
The object identifies the severity of the last alarm/alert that most recently was set or cleared.
jnxIplcNotificationDate
1.3.6.1.4.1.2636.3.71.1.5.1.1.7
DateAndTimeA date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC* 0..13 10 11 minutes from UTC 0..59 * Notes: - the value of year is in network-byte order - daylight saving time in New Zealand is +13 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 Note that if only local time is known, then timezone information (fields 8-10) is not present. SIZE (8 | 11) · OCTET STRING · hint 2d-1d-1d,1d:1d:1d.1d,1a1d:1d
This specifies the date and time when this alarm occurred.
jnxIlaNotificationSet
1.3.6.1.4.1.2636.4.29.0.1
Notification of a recently set iplc alarm.
jnxIlaNotificationLocation
1.3.6.1.4.1.2636.3.71.1.6.1.1.1
JnxOpticsLocation1 = jnxNearEnd2 = jnxFarEndNear End or Far End · Integer32
The object identifies indicates if this entry was for Near end/Far end.
jnxIlaNotificationDirection
1.3.6.1.4.1.2636.3.71.1.6.1.1.2
JnxOpticsDirection1 = jnxTxDir2 = jnxRxDir3 = jnxBiDirIndicates the direction as Rx/Tx or bi-directional. · Integer32
The object identifies indicates if this entry was for for the Tx/Rx or both.
jnxIlaNotificationSlot
1.3.6.1.4.1.2636.3.71.1.6.1.1.3
Integer32 (1..1024)
The object identifies indicates if this entry was for slot id.
jnxIlaNotificationIlaID
1.3.6.1.4.1.2636.3.71.1.6.1.1.4
Integer32 (1..1024)
The object identifies indicates if this entry was for the ILA id.
jnxIlaLastNotificationId
1.3.6.1.4.1.2636.3.71.1.6.1.1.5
JnxIlaNotificationId1 = jnxIlaBoardTemperatureAbnormalAlarm2 = jnxIlaPower0AbnormalAlarm3 = jnxIlaPower1AbnormalAlarm4 = jnxIlaFan0MissingAlarm5 = jnxIlaFan1MissingAlarm6 = jnxIlaFan2MissingAlarm7 = jnxIlaFan0SpeedAbnormalAlarm8 = jnxIlaFan1SpeedAbnormalAlarm9 = jnxIlaFan2SpeedAbnormalAlarm10 = jnxIlaSoftwareVersionAbnormalAlarm11 = jnxIlaCommunicationAbnormalAlarm12 = jnxIlaTableErrAlarm13 = jnxIlaEdfaEabCaseTemperatureAlarm14 = jnxIlaEdfaEabRFLAlarm15 = jnxIlaEdfaEabOOPAlarm16 = jnxIlaEdfaEabOOGAlarm17 = jnxIlaEdfaEabPump0EOLAlarm18 = jnxIlaEdfaEabPump1EOLAlarm19 = jnxIlaEdfaEabPump0TemperatureAlarm20 = jnxIlaEdfaEabPump1TemperatureAlarm21 = jnxIlaEdfaEabInputLOSAlarm22 = jnxIlaEdfaEabOutputLOSAlarm23 = jnxIlaEdfaEabCaliTableErrAlarm24 = jnxIlaEdfaEbaCaseTemperatureAlarm25 = jnxIlaEdfaEbaRFLAlarm26 = jnxIlaEdfaEbaOOPAlarm27 = jnxIlaEdfaEbaOOGAlarm28 = jnxIlaEdfaEbaPump0EOLAlarm29 = jnxIlaEdfaEbaPump1EOLAlarm30 = jnxIlaEdfaEbaPump0TemperatureAlarm31 = jnxIlaEdfaEbaPump1TemperatureAlarm32 = jnxIlaEdfaEbaInputLOSAlarm33 = jnxIlaEdfaEbaOutputLOSAlarm34 = jnxIlaEdfaEbaCaliTableErrAlarm35 = jnxIlaOscaAddPowerLOSAlarm36 = jnxIlaOscaDropPowerLOSAlarm37 = jnxIlaOscbAddPowerLOSAlarm38 = jnxIlaOscbDropPowerLOSAlarm39 = jnxIlaOscATxPwrLow15minAlert40 = jnxIlaOscATxPwrHigh15minAlert41 = jnxIlaOscARxPwrLow15minAlert42 = jnxIlaOscARxPwrHigh15minAlert43 = jnxIlaOscAFibLossLow15minAlert44 = jnxIlaOscAFibLossHigh15minAlert45 = jnxIlaVoaALineOutLow15minAlert46 = jnxIlaVoaALineOutHigh15minAlert47 = jnxIlaOscBTxPwrLow15minAlert48 = jnxIlaOscBTxPwrHigh15minAlert49 = jnxIlaOscBRxPwrLow15minAlert50 = jnxIlaOscBRxPwrHigh15minAlert51 = jnxIlaOscBFibLossLow15minAlert52 = jnxIlaOscBFibLossHigh15minAlert53 = jnxIlaVoaBLineOutLow15minAlert54 = jnxIlaVoaBLineOutHigh15minAlert55 = jnxIlaEdfaABInputPwrLow15minAlert56 = jnxIlaEdfaABInputPwrHigh15minAlert57 = jnxIlaEdfaABOutputPwrLow15minAlert58 = jnxIlaEdfaABOutputPwrHigh15minAlert59 = jnxIlaEdfaABPump0CurLow15minAlert60 = jnxIlaEdfaABPump0CurHigh15minAlert61 = jnxIlaEdfaABPump1CurLow15minAlert62 = jnxIlaEdfaABPump1CurHigh15minAlert63 = jnxIlaEdfaABPump0TempLow15minAlert64 = jnxIlaEdfaABPump0TempHigh15minAlert65 = jnxIlaEdfaABPump1TempLow15minAlert66 = jnxIlaEdfaABPump1TempHigh15minAlert67 = jnxIlaEdfaBAInputPwrLow15minAlert68 = jnxIlaEdfaBAInputPwrHigh15minAlert69 = jnxIlaEdfaBAOutputPwrLow15minAlert70 = jnxIlaEdfaBAOutputPwrHigh15minAlert71 = jnxIlaEdfaBAPump0CurLow15minAlert72 = jnxIlaEdfaBAPump0CurHigh15minAlert73 = jnxIlaEdfaBAPump1CurLow15minAlert74 = jnxIlaEdfaBAPump1CurHigh15minAlert75 = jnxIlaEdfaBAPump0TempLow15minAlert76 = jnxIlaEdfaBAPump0TempHigh15minAlert77 = jnxIlaEdfaBAPump1TempLow15minAlert78 = jnxIlaEdfaBAPump1TempHigh15minAlert79 = jnxIla24HourOscATxPwrLowAlert80 = jnxIla24HourOscATxPwrHighAlert81 = jnxIla24HourOscARxPwrLowAlert82 = jnxIla24HourOscARxPwrHighAlert83 = jnxIla24HourOscAFibLossLowAlert84 = jnxIla24HourOscAFibLossHighAlert85 = jnxIla24HourVoaALineOutLowAlert86 = jnxIla24HourVoaALineOutHighAlert87 = jnxIla24HourOscBTxPwrLowAlert88 = jnxIla24HourOscBTxPwrHighAlert89 = jnxIla24HourOscBRxPwrLowAlert90 = jnxIla24HourOscBRxPwrHighAlert91 = jnxIla24HourOscBFibLossLowAlert92 = jnxIla24HourOscBFibLossHighAlert93 = jnxIla24HourVoaBLineOutLowAlert94 = jnxIla24HourVoaBLineOutHighAlert95 = jnxIla24HourEdfaABInputPwrLowAlert96 = jnxIla24HourEdfaABInputPwrHighAlert97 = jnxIla24HourEdfaABOutputPwrLowAlert98 = jnxIla24HourEdfaABOutputPwrHighAlert99 = jnxIla24HourEdfaABPump0CurLowAlert100 = jnxIla24HourEdfaABPump0CurHighAlert101 = jnxIla24HourEdfaABPump1CurLowAlert102 = jnxIla24HourEdfaABPump1CurHighAlert103 = jnxIla24HourEdfaABPump0TempLowAlert104 = jnxIla24HourEdfaABPump0TempHighAlert105 = jnxIla24HourEdfaABPump1TempLowAlert106 = jnxIla24HourEdfaABPump1TempHighAlert107 = jnxIla24HourEdfaBAInputPwrLowAlert108 = jnxIla24HourEdfaBAInputPwrHighAlert109 = jnxIla24HourEdfaBAOutputPwrLowAlert110 = jnxIla24HourEdfaBAOutputPwrHighAlert111 = jnxIla24HourEdfaBAPump0CurLowAlert112 = jnxIla24HourEdfaBAPump0CurHighAlert113 = jnxIla24HourEdfaBAPump1CurLowAlert114 = jnxIla24HourEdfaBAPump1CurHighAlert115 = jnxIla24HourEdfaBAPump0TempLowAlert116 = jnxIla24HourEdfaBAPump0TempHighAlert117 = jnxIla24HourEdfaBAPump1TempLowAlert118 = jnxIla24HourEdfaBAPump1TempHighAlert119 = jnxIlaEdfaABSignalPwrLow15minAlert120 = jnxIlaEdfaABSignalPwrHigh15minAlert121 = jnxIla24HourEdfaABSignalPwrLowAlert122 = jnxIla24HourEdfaABSignalPwrHighAlert123 = jnxIlaEdfaBASignalPwrLow15minAlert124 = jnxIlaEdfaBASignalPwrHigh15minAlert125 = jnxIla24HourEdfaBASignalPwrLowAlert126 = jnxIla24HourEdfaBASignalPwrHighAlert127 = jnxIlaEdfaABGainRangeErrAlarm128 = jnxIlaEdfaBAGainRangeErrAlarmIla alarm types · Integer32
The object identifies the Ila alarm that most recently was set or cleared.
jnxIlaNotificationSeverity
1.3.6.1.4.1.2636.3.71.1.6.1.1.6
JnxOpticsSeverity1 = jnxCritical2 = jnxMajor3 = jnxMinor4 = jnxInfoSeverity of the Notification · Integer32
The object identifies the severity of the last alarm/alert that most recently was set or cleared.
jnxIlaNotificationDate
1.3.6.1.4.1.2636.3.71.1.6.1.1.7
DateAndTimeA date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC* 0..13 10 11 minutes from UTC 0..59 * Notes: - the value of year is in network-byte order - daylight saving time in New Zealand is +13 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 Note that if only local time is known, then timezone information (fields 8-10) is not present. SIZE (8 | 11) · OCTET STRING · hint 2d-1d-1d,1d:1d:1d.1d,1a1d:1d
This specifies the date and time when this alarm occurred.
jnxIlaNotificationCleared
1.3.6.1.4.1.2636.4.29.0.2
Notification of a recently cleared iplc alarm.
jnxIlaNotificationLocation
1.3.6.1.4.1.2636.3.71.1.6.1.1.1
JnxOpticsLocation1 = jnxNearEnd2 = jnxFarEndNear End or Far End · Integer32
The object identifies indicates if this entry was for Near end/Far end.
jnxIlaNotificationDirection
1.3.6.1.4.1.2636.3.71.1.6.1.1.2
JnxOpticsDirection1 = jnxTxDir2 = jnxRxDir3 = jnxBiDirIndicates the direction as Rx/Tx or bi-directional. · Integer32
The object identifies indicates if this entry was for for the Tx/Rx or both.
jnxIlaNotificationSlot
1.3.6.1.4.1.2636.3.71.1.6.1.1.3
Integer32 (1..1024)
The object identifies indicates if this entry was for slot id.
jnxIlaNotificationIlaID
1.3.6.1.4.1.2636.3.71.1.6.1.1.4
Integer32 (1..1024)
The object identifies indicates if this entry was for the ILA id.
jnxIlaLastNotificationId
1.3.6.1.4.1.2636.3.71.1.6.1.1.5
JnxIlaNotificationId1 = jnxIlaBoardTemperatureAbnormalAlarm2 = jnxIlaPower0AbnormalAlarm3 = jnxIlaPower1AbnormalAlarm4 = jnxIlaFan0MissingAlarm5 = jnxIlaFan1MissingAlarm6 = jnxIlaFan2MissingAlarm7 = jnxIlaFan0SpeedAbnormalAlarm8 = jnxIlaFan1SpeedAbnormalAlarm9 = jnxIlaFan2SpeedAbnormalAlarm10 = jnxIlaSoftwareVersionAbnormalAlarm11 = jnxIlaCommunicationAbnormalAlarm12 = jnxIlaTableErrAlarm13 = jnxIlaEdfaEabCaseTemperatureAlarm14 = jnxIlaEdfaEabRFLAlarm15 = jnxIlaEdfaEabOOPAlarm16 = jnxIlaEdfaEabOOGAlarm17 = jnxIlaEdfaEabPump0EOLAlarm18 = jnxIlaEdfaEabPump1EOLAlarm19 = jnxIlaEdfaEabPump0TemperatureAlarm20 = jnxIlaEdfaEabPump1TemperatureAlarm21 = jnxIlaEdfaEabInputLOSAlarm22 = jnxIlaEdfaEabOutputLOSAlarm23 = jnxIlaEdfaEabCaliTableErrAlarm24 = jnxIlaEdfaEbaCaseTemperatureAlarm25 = jnxIlaEdfaEbaRFLAlarm26 = jnxIlaEdfaEbaOOPAlarm27 = jnxIlaEdfaEbaOOGAlarm28 = jnxIlaEdfaEbaPump0EOLAlarm29 = jnxIlaEdfaEbaPump1EOLAlarm30 = jnxIlaEdfaEbaPump0TemperatureAlarm31 = jnxIlaEdfaEbaPump1TemperatureAlarm32 = jnxIlaEdfaEbaInputLOSAlarm33 = jnxIlaEdfaEbaOutputLOSAlarm34 = jnxIlaEdfaEbaCaliTableErrAlarm35 = jnxIlaOscaAddPowerLOSAlarm36 = jnxIlaOscaDropPowerLOSAlarm37 = jnxIlaOscbAddPowerLOSAlarm38 = jnxIlaOscbDropPowerLOSAlarm39 = jnxIlaOscATxPwrLow15minAlert40 = jnxIlaOscATxPwrHigh15minAlert41 = jnxIlaOscARxPwrLow15minAlert42 = jnxIlaOscARxPwrHigh15minAlert43 = jnxIlaOscAFibLossLow15minAlert44 = jnxIlaOscAFibLossHigh15minAlert45 = jnxIlaVoaALineOutLow15minAlert46 = jnxIlaVoaALineOutHigh15minAlert47 = jnxIlaOscBTxPwrLow15minAlert48 = jnxIlaOscBTxPwrHigh15minAlert49 = jnxIlaOscBRxPwrLow15minAlert50 = jnxIlaOscBRxPwrHigh15minAlert51 = jnxIlaOscBFibLossLow15minAlert52 = jnxIlaOscBFibLossHigh15minAlert53 = jnxIlaVoaBLineOutLow15minAlert54 = jnxIlaVoaBLineOutHigh15minAlert55 = jnxIlaEdfaABInputPwrLow15minAlert56 = jnxIlaEdfaABInputPwrHigh15minAlert57 = jnxIlaEdfaABOutputPwrLow15minAlert58 = jnxIlaEdfaABOutputPwrHigh15minAlert59 = jnxIlaEdfaABPump0CurLow15minAlert60 = jnxIlaEdfaABPump0CurHigh15minAlert61 = jnxIlaEdfaABPump1CurLow15minAlert62 = jnxIlaEdfaABPump1CurHigh15minAlert63 = jnxIlaEdfaABPump0TempLow15minAlert64 = jnxIlaEdfaABPump0TempHigh15minAlert65 = jnxIlaEdfaABPump1TempLow15minAlert66 = jnxIlaEdfaABPump1TempHigh15minAlert67 = jnxIlaEdfaBAInputPwrLow15minAlert68 = jnxIlaEdfaBAInputPwrHigh15minAlert69 = jnxIlaEdfaBAOutputPwrLow15minAlert70 = jnxIlaEdfaBAOutputPwrHigh15minAlert71 = jnxIlaEdfaBAPump0CurLow15minAlert72 = jnxIlaEdfaBAPump0CurHigh15minAlert73 = jnxIlaEdfaBAPump1CurLow15minAlert74 = jnxIlaEdfaBAPump1CurHigh15minAlert75 = jnxIlaEdfaBAPump0TempLow15minAlert76 = jnxIlaEdfaBAPump0TempHigh15minAlert77 = jnxIlaEdfaBAPump1TempLow15minAlert78 = jnxIlaEdfaBAPump1TempHigh15minAlert79 = jnxIla24HourOscATxPwrLowAlert80 = jnxIla24HourOscATxPwrHighAlert81 = jnxIla24HourOscARxPwrLowAlert82 = jnxIla24HourOscARxPwrHighAlert83 = jnxIla24HourOscAFibLossLowAlert84 = jnxIla24HourOscAFibLossHighAlert85 = jnxIla24HourVoaALineOutLowAlert86 = jnxIla24HourVoaALineOutHighAlert87 = jnxIla24HourOscBTxPwrLowAlert88 = jnxIla24HourOscBTxPwrHighAlert89 = jnxIla24HourOscBRxPwrLowAlert90 = jnxIla24HourOscBRxPwrHighAlert91 = jnxIla24HourOscBFibLossLowAlert92 = jnxIla24HourOscBFibLossHighAlert93 = jnxIla24HourVoaBLineOutLowAlert94 = jnxIla24HourVoaBLineOutHighAlert95 = jnxIla24HourEdfaABInputPwrLowAlert96 = jnxIla24HourEdfaABInputPwrHighAlert97 = jnxIla24HourEdfaABOutputPwrLowAlert98 = jnxIla24HourEdfaABOutputPwrHighAlert99 = jnxIla24HourEdfaABPump0CurLowAlert100 = jnxIla24HourEdfaABPump0CurHighAlert101 = jnxIla24HourEdfaABPump1CurLowAlert102 = jnxIla24HourEdfaABPump1CurHighAlert103 = jnxIla24HourEdfaABPump0TempLowAlert104 = jnxIla24HourEdfaABPump0TempHighAlert105 = jnxIla24HourEdfaABPump1TempLowAlert106 = jnxIla24HourEdfaABPump1TempHighAlert107 = jnxIla24HourEdfaBAInputPwrLowAlert108 = jnxIla24HourEdfaBAInputPwrHighAlert109 = jnxIla24HourEdfaBAOutputPwrLowAlert110 = jnxIla24HourEdfaBAOutputPwrHighAlert111 = jnxIla24HourEdfaBAPump0CurLowAlert112 = jnxIla24HourEdfaBAPump0CurHighAlert113 = jnxIla24HourEdfaBAPump1CurLowAlert114 = jnxIla24HourEdfaBAPump1CurHighAlert115 = jnxIla24HourEdfaBAPump0TempLowAlert116 = jnxIla24HourEdfaBAPump0TempHighAlert117 = jnxIla24HourEdfaBAPump1TempLowAlert118 = jnxIla24HourEdfaBAPump1TempHighAlert119 = jnxIlaEdfaABSignalPwrLow15minAlert120 = jnxIlaEdfaABSignalPwrHigh15minAlert121 = jnxIla24HourEdfaABSignalPwrLowAlert122 = jnxIla24HourEdfaABSignalPwrHighAlert123 = jnxIlaEdfaBASignalPwrLow15minAlert124 = jnxIlaEdfaBASignalPwrHigh15minAlert125 = jnxIla24HourEdfaBASignalPwrLowAlert126 = jnxIla24HourEdfaBASignalPwrHighAlert127 = jnxIlaEdfaABGainRangeErrAlarm128 = jnxIlaEdfaBAGainRangeErrAlarmIla alarm types · Integer32
The object identifies the Ila alarm that most recently was set or cleared.
jnxIlaNotificationSeverity
1.3.6.1.4.1.2636.3.71.1.6.1.1.6
JnxOpticsSeverity1 = jnxCritical2 = jnxMajor3 = jnxMinor4 = jnxInfoSeverity of the Notification · Integer32
The object identifies the severity of the last alarm/alert that most recently was set or cleared.
jnxIlaNotificationDate
1.3.6.1.4.1.2636.3.71.1.6.1.1.7
DateAndTimeA date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC* 0..13 10 11 minutes from UTC 0..59 * Notes: - the value of year is in network-byte order - daylight saving time in New Zealand is +13 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 Note that if only local time is known, then timezone information (fields 8-10) is not present. SIZE (8 | 11) · OCTET STRING · hint 2d-1d-1d,1d:1d:1d.1d,1a1d:1d
This specifies the date and time when this alarm occurred.