jnxJsIdpDataPlaneMemoryUsage
1.3.6.1.4.1.2636.3.39.1.11.1.1.1
Unsigned32 · percent
Memory used by IDP in the data plane in percentage
JUNIPER-JS-IDP-MIB
2007-06-13
This is Juniper Networks' implementation of enterprise specific MIB for IDP.
Download JUNIPER-JS-IDP-MIB.txt Open JUNIPER-JS-IDP-MIB.txt in a new tab
SCALARS (10) · TABLES (1) · TRAPS (2)
Scalars (10)
Tables (1)
| Name | OID |
|---|---|
| jnxJsIdpAttackTable | 1.3.6.1.4.1.2636.3.39.1.11.1.1.7 |
Traps (2)
| Name | OID |
|---|---|
| jnxJsIdpSignatureUpdate | 1.3.6.1.4.1.2636.3.39.1.11.1.2.0.1 |
| jnxJsIdpAttackLog | 1.3.6.1.4.1.2636.3.39.1.11.1.2.0.2 |
END OF TOC
Scalar details
jnxJsIdpSessionsUsage
1.3.6.1.4.1.2636.3.39.1.11.1.1.2
Unsigned32 · percent
Currently allocated sessions by IDP in percentage
jnxJsIdpSessionsMaximum
1.3.6.1.4.1.2636.3.39.1.11.1.1.3
Unsigned32
Maximum number of sessions supported by IDP
jnxJsIdpPoliciesSupported
1.3.6.1.4.1.2636.3.39.1.11.1.1.4
Gauge32
Number of policies that can be simultaneously loaded on the IDP device
jnxJsIdpPoliciesLoaded
1.3.6.1.4.1.2636.3.39.1.11.1.1.5
Gauge32
Number of policies that are currently loaded on the IDP device
jnxJsIdpActivePolicyName
1.3.6.1.4.1.2636.3.39.1.11.1.1.6
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The name of the policy currently active on the device
jnxJsIdpRunningDetectorVersion
1.3.6.1.4.1.2636.3.39.1.11.1.1.8
OCTET STRING SIZE (0..255)
The version of the detector currently loaded
jnxJsIdpSecurityPackageVersion
1.3.6.1.4.1.2636.3.39.1.11.1.1.9
OCTET STRING SIZE (0..255)
The version of the security package currently loaded
jnxJsIdpLastSignatureUpdateTime
1.3.6.1.4.1.2636.3.39.1.11.1.1.10
TimeTicks
The value of sysUpTime when the signature was last updated successfully. Zero if unknown.
jnxJsIdpSignatureUpdateStatus
1.3.6.1.4.1.2636.3.39.1.11.1.1.11
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The status of the signature update i.e. success or failure
Table details
jnxJsIdpAttackTable
1.3.6.1.4.1.2636.3.39.1.11.1.1.7
Index: jnxJsIdpAttackIndex
The attack table giving details of the attack and the number of hits
jnxJsIdpAttackIndex
1.3.6.1.4.1.2636.3.39.1.11.1.1.7.1.1
Unsigned32
The index for the attack table
jnxJsIdpAttackName
1.3.6.1.4.1.2636.3.39.1.11.1.1.7.1.2
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The name of an attack identified by IDP
jnxJsIdpAttackHits
1.3.6.1.4.1.2636.3.39.1.11.1.1.7.1.3
Counter32
Number of times an attack has been hit
Trap details
jnxJsIdpSignatureUpdate
1.3.6.1.4.1.2636.3.39.1.11.1.2.0.1
A trap which signifies that a signature update has occurred.
jnxJsIdpRunningDetectorVersion
1.3.6.1.4.1.2636.3.39.1.11.1.1.8
OCTET STRING SIZE (0..255)
The version of the detector currently loaded
jnxJsIdpSecurityPackageVersion
1.3.6.1.4.1.2636.3.39.1.11.1.1.9
OCTET STRING SIZE (0..255)
The version of the security package currently loaded
jnxJsIdpLastSignatureUpdateTime
1.3.6.1.4.1.2636.3.39.1.11.1.1.10
TimeTicks
The value of sysUpTime when the signature was last updated successfully. Zero if unknown.
jnxJsIdpSignatureUpdateStatus
1.3.6.1.4.1.2636.3.39.1.11.1.1.11
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The status of the signature update i.e. success or failure
jnxJsIdpAttackLog
1.3.6.1.4.1.2636.3.39.1.11.1.2.0.2
A trap which signifies that attacks have been detected. jnxJsIdpAttackName is the name of the attacks that have been detected so far and jnxJsIdpAttackHits is the number of times each attack has been detected.
jnxJsIdpAttackName
1.3.6.1.4.1.2636.3.39.1.11.1.1.7.1.2
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The name of an attack identified by IDP
jnxJsIdpAttackHits
1.3.6.1.4.1.2636.3.39.1.11.1.1.7.1.3
Counter32
Number of times an attack has been hit