EZ5 MIB Catalog

JUNIPER-JVAE-NODE-MIB

2012-08-01

The MIB modules for JunosV App Engine Compute Nodes.

Download JUNIPER-JVAE-NODE-MIB.txt Open JUNIPER-JVAE-NODE-MIB.txt in a new tab

TABLES (7) · TRAPS (14)

Tables (7)

NameOID
jnxJVAECNSysInfoTable1.3.6.1.4.1.2636.3.69.2.1.1.1
jnxJVAECNProcessorTable1.3.6.1.4.1.2636.3.69.2.1.1.2
jnxJVAECNifTable1.3.6.1.4.1.2636.3.69.2.1.1.3
jnxJVAECNFileSysTable1.3.6.1.4.1.2636.3.69.2.1.1.4
jnxJVAECNDiskTable1.3.6.1.4.1.2636.3.69.2.1.1.5
jnxJVAECNRaidTable1.3.6.1.4.1.2636.3.69.2.1.1.6
jnxJVAECNSensorTable1.3.6.1.4.1.2636.3.69.2.1.1.7

Traps (14)

NameOID
jnxJVAECNMemoryLow1.3.6.1.4.1.2636.3.69.2.0.1
jnxJVAECNMemoryOk1.3.6.1.4.1.2636.3.69.2.0.2
jnxJVAECNProcessingLoadHigh1.3.6.1.4.1.2636.3.69.2.0.3
jnxJVAECNProcessingLoadOk1.3.6.1.4.1.2636.3.69.2.0.4
jnxJVAECNProcessorLoadHigh1.3.6.1.4.1.2636.3.69.2.0.5
jnxJVAECNProcessorLoadOk1.3.6.1.4.1.2636.3.69.2.0.6
jnxJVAECNifDown1.3.6.1.4.1.2636.3.69.2.0.7
jnxJVAECNifUp1.3.6.1.4.1.2636.3.69.2.0.8
jnxJVAECNStorageLow1.3.6.1.4.1.2636.3.69.2.0.9
jnxJVAECNStorageOk1.3.6.1.4.1.2636.3.69.2.0.10
jnxJVAECNRaidError1.3.6.1.4.1.2636.3.69.2.0.11
jnxJVAECNRaidOk1.3.6.1.4.1.2636.3.69.2.0.12
jnxJVAECNSensorAlert1.3.6.1.4.1.2636.3.69.2.0.13
jnxJVAECNSensorOk1.3.6.1.4.1.2636.3.69.2.0.14

END OF TOC

Table details

jnxJVAECNSysInfoTable

1.3.6.1.4.1.2636.3.69.2.1.1.1

Index: jnxJVAECNSysId

A table for further information on Compute Nodes.

jnxJVAECNSysId

1.3.6.1.4.1.2636.3.69.2.1.1.1.1.1

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (1..32) · OCTET STRING · hint 255a

Id of the Compute Node.

jnxJVAECNSysCpus

1.3.6.1.4.1.2636.3.69.2.1.1.1.1.2

INTEGER · Integer32

The number of CPUs or cores on the Compute Node.

jnxJVAECNSysProcessingLoad

1.3.6.1.4.1.2636.3.69.2.1.1.1.1.3

INTEGER (0..100) · Integer32 · %

Total processing load on the Compute Node, in percentage.

jnxJVAECNSysMemCapacity

1.3.6.1.4.1.2636.3.69.2.1.1.1.1.4

Gauge32 · KB

The amount of RAM on the Compute Node, in kilo bytes. Zero if information is unavailable.

jnxJVAECNSysMemUsed

1.3.6.1.4.1.2636.3.69.2.1.1.1.1.5

Gauge32 · KB

The amount of RAM used on the Compute Node, in kilo bytes. Zero if information in unavailable.

jnxJVAECNSysMemFree

1.3.6.1.4.1.2636.3.69.2.1.1.1.1.6

Gauge32 · KB

The amount of RAM free on the Compute Node, in kilo bytes. Zero if information in unavailable.

jnxJVAECNSysMemUsedPr

1.3.6.1.4.1.2636.3.69.2.1.1.1.1.7

INTEGER (0..100) · Integer32 · %

The amount of RAM used on the Compute Node, in percentage. Zero if information in unavailable.

jnxJVAECNSysSwapCapacity

1.3.6.1.4.1.2636.3.69.2.1.1.1.1.8

Gauge32 · KB

Total swap space on the Compute Node, in kilo bytes. Zero if information is unavailable.

jnxJVAECNSysSwapFree

1.3.6.1.4.1.2636.3.69.2.1.1.1.1.9

Gauge32 · KB

The amout of swap space free on the Compute Node, in kilo bytes. Zero if information is unavailable.

jnxJVAECNSysBootMethod

1.3.6.1.4.1.2636.3.69.2.1.1.1.1.10

INTEGER0 = unknown1 = network2 = local · Integer32

Boot method used by the Compute Node, in the last reboot.

jnxJVAECNSysLastReboot

1.3.6.1.4.1.2636.3.69.2.1.1.1.1.11

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (30) · OCTET STRING · hint 255a · Secs

Seconds passed since the last reboot or restart of the Compute Node.

jnxJVAECNProcessorTable

1.3.6.1.4.1.2636.3.69.2.1.1.2

Index: jnxJVAECNSysId · jnxJVAECNProcessorId

A table of Processors contained in the Compute Nodes.

jnxJVAECNProcessorId

1.3.6.1.4.1.2636.3.69.2.1.1.2.1.1

INTEGER (1..256) · Integer32

An unique identifier for the processor with this Compute Node.

jnxJVAECNProcessorLoad

1.3.6.1.4.1.2636.3.69.2.1.1.2.1.2

INTEGER (0..100) · Integer32 · %

Load on the processor, expressed in percentage. Zero if information is unavailable.

jnxJVAECNifTable

1.3.6.1.4.1.2636.3.69.2.1.1.3

Index: jnxJVAECNSysId · jnxJVAECNifId

A table of network interfaces contained in the Compute Nodes.

jnxJVAECNifId

1.3.6.1.4.1.2636.3.69.2.1.1.3.1.1

INTEGER (1..65535) · Integer32

An unique identifier for the network interface.

jnxJVAECNifName

1.3.6.1.4.1.2636.3.69.2.1.1.3.1.2

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (1..10) · OCTET STRING · hint 255a

Description of the interface.

jnxJVAECNifOperStatus

1.3.6.1.4.1.2636.3.69.2.1.1.3.1.3

INTEGER0 = down1 = up · Integer32

Operational state of the interface.

jnxJVAECNifAdminStatus

1.3.6.1.4.1.2636.3.69.2.1.1.3.1.4

INTEGER0 = down1 = up · Integer32

Administrative state of the interface.

jnxJVAECNifLinkDetect

1.3.6.1.4.1.2636.3.69.2.1.1.3.1.5

TruthValue1 = true2 = falseRepresents a boolean value. · Integer32

Link presence, True if present else False. This field is meaningless when the interface is administered down.

jnxJVAECNifAddress

1.3.6.1.4.1.2636.3.69.2.1.1.3.1.6

PhysAddressRepresents media- or physical-level addresses. · OCTET STRING · hint 1x:

Physcial address (MAC) of the interface.

jnxJVAECNifInPkts

1.3.6.1.4.1.2636.3.69.2.1.1.3.1.7

Counter64 (0..18446744073709551615)

Number of packets received on the interface.

jnxJVAECNifInDiscards

1.3.6.1.4.1.2636.3.69.2.1.1.3.1.8

Counter64 (0..18446744073709551615)

Number of received packets discarded, on the interface.

jnxJVAECNifInErrors

1.3.6.1.4.1.2636.3.69.2.1.1.3.1.9

Counter64 (0..18446744073709551615)

Number of received packets with errors, on the interface.

jnxJVAECNifOutPkts

1.3.6.1.4.1.2636.3.69.2.1.1.3.1.10

Counter64 (0..18446744073709551615)

Number of packets sent on the interface.

jnxJVAECNifOutDiscards

1.3.6.1.4.1.2636.3.69.2.1.1.3.1.11

Counter64 (0..18446744073709551615)

Number of sent packets discarded, on the interface.

jnxJVAECNifOutErrors

1.3.6.1.4.1.2636.3.69.2.1.1.3.1.12

Counter64 (0..18446744073709551615)

Number of sent packets with errors, on the interface.

jnxJVAECNFileSysTable

1.3.6.1.4.1.2636.3.69.2.1.1.4

Index: jnxJVAECNSysId · jnxJVAECNFileSysId

A table of mounted file systems in the Compute Nodes.

jnxJVAECNFileSysId

1.3.6.1.4.1.2636.3.69.2.1.1.4.1.1

INTEGER (1..127) · Integer32

An unique identifier for the file system.

jnxJVAECNFileSysMountPoint

1.3.6.1.4.1.2636.3.69.2.1.1.4.1.2

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (1..127) · OCTET STRING · hint 255a

The Filesystem path where the file system is mounted.

jnxJVAECNFileSysSize

1.3.6.1.4.1.2636.3.69.2.1.1.4.1.3

Gauge32 · KB

Total storage capacity of the file system, in kilo bytes.

jnxJVAECNFileSysUsed

1.3.6.1.4.1.2636.3.69.2.1.1.4.1.4

Gauge32 · KB

Used Storage capacity of the file system, in kilo bytes.

jnxJVAECNFileSysFree

1.3.6.1.4.1.2636.3.69.2.1.1.4.1.5

Gauge32 · KB

Unused Storage capacity of the file system, in kilo bytes.

jnxJVAECNFileSysUsedPr

1.3.6.1.4.1.2636.3.69.2.1.1.4.1.6

INTEGER (0..100) · Integer32 · %

Used Storage capacity of the file system, in percentage.

jnxJVAECNDiskTable

1.3.6.1.4.1.2636.3.69.2.1.1.5

Index: jnxJVAECNSysId · jnxJVAECNDiskId

A table of Physical Disks connected to the Compute Nodes.

jnxJVAECNDiskId

1.3.6.1.4.1.2636.3.69.2.1.1.5.1.1

INTEGER (1..15) · Integer32

The unique identifier for this disk.

jnxJVAECNDiskSlot

1.3.6.1.4.1.2636.3.69.2.1.1.5.1.2

INTEGER (0..14) · Integer32

The slot at which disk is connected.

jnxJVAECNDiskModel

1.3.6.1.4.1.2636.3.69.2.1.1.5.1.3

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..127) · OCTET STRING · hint 255a

The Disk product model.

jnxJVAECNDiskRevision

1.3.6.1.4.1.2636.3.69.2.1.1.5.1.4

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (1..127) · OCTET STRING · hint 255a

The Disk product revision.

jnxJVAECNDiskVendor

1.3.6.1.4.1.2636.3.69.2.1.1.5.1.5

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (1..127) · OCTET STRING · hint 255a

The Disk product vendor.

jnxJVAECNDiskOSPath

1.3.6.1.4.1.2636.3.69.2.1.1.5.1.6

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (1..127) · OCTET STRING · hint 255a

The Disk device path.

jnxJVAECNRaidTable

1.3.6.1.4.1.2636.3.69.2.1.1.6

Index: jnxJVAECNSysId · jnxJVAECNRaidId

A table of Raid Arrays on the Compute Nodes.

jnxJVAECNRaidId

1.3.6.1.4.1.2636.3.69.2.1.1.6.1.1

INTEGER (1..15) · Integer32

The unique identifier for this raid array.

jnxJVAECNRaidName

1.3.6.1.4.1.2636.3.69.2.1.1.6.1.2

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..64) · OCTET STRING · hint 255a

Name of the raid array.

jnxJVAECNRaidState

1.3.6.1.4.1.2636.3.69.2.1.1.6.1.3

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..64) · OCTET STRING · hint 255a

State of the raid array.

jnxJVAECNRaidLevel

1.3.6.1.4.1.2636.3.69.2.1.1.6.1.4

INTEGER · Integer32

Raid level of the raid array.

jnxJVAECNRaidSize

1.3.6.1.4.1.2636.3.69.2.1.1.6.1.5

Gauge32 · GB

Size of the raid array.

jnxJVAECNRaidMembers

1.3.6.1.4.1.2636.3.69.2.1.1.6.1.6

INTEGER · Integer32

Number of members of the raid array.

jnxJVAECNRaidMemberDiskPartitions

1.3.6.1.4.1.2636.3.69.2.1.1.6.1.7

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..127) · OCTET STRING · hint 255a

List of device path of the partitions, that are members of the raid array.

jnxJVAECNRaidMemberDiskAtSlots

1.3.6.1.4.1.2636.3.69.2.1.1.6.1.8

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..32) · OCTET STRING · hint 255a

List of slot numbers identifying the disks, that are members of the raid array.

jnxJVAECNRaidOSPath

1.3.6.1.4.1.2636.3.69.2.1.1.6.1.9

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (1..127) · OCTET STRING · hint 255a

The raid device disk path.

jnxJVAECNSensorTable

1.3.6.1.4.1.2636.3.69.2.1.1.7

Index: jnxJVAECNSysId · jnxJVAECNSensorId

A table of Sensors on the Compute Nodes.

jnxJVAECNSensorId

1.3.6.1.4.1.2636.3.69.2.1.1.7.1.1

INTEGER (1..65535) · Integer32

The unique identifier for this sensor.

jnxJVAECNSensorType

1.3.6.1.4.1.2636.3.69.2.1.1.7.1.2

INTEGER0 = voltage1 = temperature2 = fan · Integer32

Type of the sensor.

jnxJVAECNSensorValue

1.3.6.1.4.1.2636.3.69.2.1.1.7.1.3

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..127) · OCTET STRING · hint 255a

Sensor reading.

jnxJVAECNSensorRange

1.3.6.1.4.1.2636.3.69.2.1.1.7.1.4

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..32) · OCTET STRING · hint 255a

Normal operating range for the sensor, traps are raised the reading is no within this range.

jnxJVAECNSensorDesc

1.3.6.1.4.1.2636.3.69.2.1.1.7.1.5

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..127) · OCTET STRING · hint 255a

Description of the sensor.

Trap details

jnxJVAECNMemoryLow

1.3.6.1.4.1.2636.3.69.2.0.1

This notification is generated whenever the free (unused) RAM goes below threshold for this compute node.

jnxJVAECNSysId

1.3.6.1.4.1.2636.3.69.2.1.1.1.1.1

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (1..32) · OCTET STRING · hint 255a

Id of the Compute Node.

jnxJVAECNSysMemCapacity

1.3.6.1.4.1.2636.3.69.2.1.1.1.1.4

Gauge32 · KB

The amount of RAM on the Compute Node, in kilo bytes. Zero if information is unavailable.

jnxJVAECNSysMemUsed

1.3.6.1.4.1.2636.3.69.2.1.1.1.1.5

Gauge32 · KB

The amount of RAM used on the Compute Node, in kilo bytes. Zero if information in unavailable.

jnxJVAECNSysMemFree

1.3.6.1.4.1.2636.3.69.2.1.1.1.1.6

Gauge32 · KB

The amount of RAM free on the Compute Node, in kilo bytes. Zero if information in unavailable.

jnxJVAECNSysMemUsedPr

1.3.6.1.4.1.2636.3.69.2.1.1.1.1.7

INTEGER (0..100) · Integer32 · %

The amount of RAM used on the Compute Node, in percentage. Zero if information in unavailable.

jnxJVAECNSysSwapCapacity

1.3.6.1.4.1.2636.3.69.2.1.1.1.1.8

Gauge32 · KB

Total swap space on the Compute Node, in kilo bytes. Zero if information is unavailable.

jnxJVAECNSysSwapFree

1.3.6.1.4.1.2636.3.69.2.1.1.1.1.9

Gauge32 · KB

The amout of swap space free on the Compute Node, in kilo bytes. Zero if information is unavailable.

jnxJVAECNMemoryOk

1.3.6.1.4.1.2636.3.69.2.0.2

This notification is generated whenever the free (unused) RAM recovers above threshold for this compute node and previously a jnxJVAECNMemoryLow was reported.

jnxJVAECNSysId

1.3.6.1.4.1.2636.3.69.2.1.1.1.1.1

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (1..32) · OCTET STRING · hint 255a

Id of the Compute Node.

jnxJVAECNSysMemCapacity

1.3.6.1.4.1.2636.3.69.2.1.1.1.1.4

Gauge32 · KB

The amount of RAM on the Compute Node, in kilo bytes. Zero if information is unavailable.

jnxJVAECNSysMemUsed

1.3.6.1.4.1.2636.3.69.2.1.1.1.1.5

Gauge32 · KB

The amount of RAM used on the Compute Node, in kilo bytes. Zero if information in unavailable.

jnxJVAECNSysMemFree

1.3.6.1.4.1.2636.3.69.2.1.1.1.1.6

Gauge32 · KB

The amount of RAM free on the Compute Node, in kilo bytes. Zero if information in unavailable.

jnxJVAECNSysMemUsedPr

1.3.6.1.4.1.2636.3.69.2.1.1.1.1.7

INTEGER (0..100) · Integer32 · %

The amount of RAM used on the Compute Node, in percentage. Zero if information in unavailable.

jnxJVAECNSysSwapCapacity

1.3.6.1.4.1.2636.3.69.2.1.1.1.1.8

Gauge32 · KB

Total swap space on the Compute Node, in kilo bytes. Zero if information is unavailable.

jnxJVAECNSysSwapFree

1.3.6.1.4.1.2636.3.69.2.1.1.1.1.9

Gauge32 · KB

The amout of swap space free on the Compute Node, in kilo bytes. Zero if information is unavailable.

jnxJVAECNProcessingLoadHigh

1.3.6.1.4.1.2636.3.69.2.0.3

This notification is generated whenever the overall system processing load exceeds threshold.

jnxJVAECNSysId

1.3.6.1.4.1.2636.3.69.2.1.1.1.1.1

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (1..32) · OCTET STRING · hint 255a

Id of the Compute Node.

jnxJVAECNSysProcessingLoad

1.3.6.1.4.1.2636.3.69.2.1.1.1.1.3

INTEGER (0..100) · Integer32 · %

Total processing load on the Compute Node, in percentage.

jnxJVAECNProcessingLoadOk

1.3.6.1.4.1.2636.3.69.2.0.4

This notification is generated whenever the overall system processing load is within threshold and previously a jnxJVAECNProcessingLoadHigh was reported.

jnxJVAECNSysId

1.3.6.1.4.1.2636.3.69.2.1.1.1.1.1

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (1..32) · OCTET STRING · hint 255a

Id of the Compute Node.

jnxJVAECNSysProcessingLoad

1.3.6.1.4.1.2636.3.69.2.1.1.1.1.3

INTEGER (0..100) · Integer32 · %

Total processing load on the Compute Node, in percentage.

jnxJVAECNProcessorLoadHigh

1.3.6.1.4.1.2636.3.69.2.0.5

This notification is generated whenever the load on a processor exceeds threshold.

jnxJVAECNSysId

1.3.6.1.4.1.2636.3.69.2.1.1.1.1.1

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (1..32) · OCTET STRING · hint 255a

Id of the Compute Node.

jnxJVAECNProcessorId

1.3.6.1.4.1.2636.3.69.2.1.1.2.1.1

INTEGER (1..256) · Integer32

An unique identifier for the processor with this Compute Node.

jnxJVAECNProcessorLoad

1.3.6.1.4.1.2636.3.69.2.1.1.2.1.2

INTEGER (0..100) · Integer32 · %

Load on the processor, expressed in percentage. Zero if information is unavailable.

jnxJVAECNProcessorLoadOk

1.3.6.1.4.1.2636.3.69.2.0.6

This notification is generated whenever the load on a processor is within threshold and previously a jnxJVAECNProcessorLoadHigh was reported.

jnxJVAECNSysId

1.3.6.1.4.1.2636.3.69.2.1.1.1.1.1

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (1..32) · OCTET STRING · hint 255a

Id of the Compute Node.

jnxJVAECNProcessorId

1.3.6.1.4.1.2636.3.69.2.1.1.2.1.1

INTEGER (1..256) · Integer32

An unique identifier for the processor with this Compute Node.

jnxJVAECNProcessorLoad

1.3.6.1.4.1.2636.3.69.2.1.1.2.1.2

INTEGER (0..100) · Integer32 · %

Load on the processor, expressed in percentage. Zero if information is unavailable.

jnxJVAECNifDown

1.3.6.1.4.1.2636.3.69.2.0.7

This notification is generated whenever network interface is down.

jnxJVAECNSysId

1.3.6.1.4.1.2636.3.69.2.1.1.1.1.1

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (1..32) · OCTET STRING · hint 255a

Id of the Compute Node.

jnxJVAECNifId

1.3.6.1.4.1.2636.3.69.2.1.1.3.1.1

INTEGER (1..65535) · Integer32

An unique identifier for the network interface.

jnxJVAECNifName

1.3.6.1.4.1.2636.3.69.2.1.1.3.1.2

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (1..10) · OCTET STRING · hint 255a

Description of the interface.

jnxJVAECNifOperStatus

1.3.6.1.4.1.2636.3.69.2.1.1.3.1.3

INTEGER0 = down1 = up · Integer32

Operational state of the interface.

jnxJVAECNifAdminStatus

1.3.6.1.4.1.2636.3.69.2.1.1.3.1.4

INTEGER0 = down1 = up · Integer32

Administrative state of the interface.

jnxJVAECNifLinkDetect

1.3.6.1.4.1.2636.3.69.2.1.1.3.1.5

TruthValue1 = true2 = falseRepresents a boolean value. · Integer32

Link presence, True if present else False. This field is meaningless when the interface is administered down.

jnxJVAECNifUp

1.3.6.1.4.1.2636.3.69.2.0.8

This notification is generated whenever network interface is up and previously a jnxJVAECNifDown was reported.

jnxJVAECNSysId

1.3.6.1.4.1.2636.3.69.2.1.1.1.1.1

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (1..32) · OCTET STRING · hint 255a

Id of the Compute Node.

jnxJVAECNifId

1.3.6.1.4.1.2636.3.69.2.1.1.3.1.1

INTEGER (1..65535) · Integer32

An unique identifier for the network interface.

jnxJVAECNifName

1.3.6.1.4.1.2636.3.69.2.1.1.3.1.2

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (1..10) · OCTET STRING · hint 255a

Description of the interface.

jnxJVAECNifOperStatus

1.3.6.1.4.1.2636.3.69.2.1.1.3.1.3

INTEGER0 = down1 = up · Integer32

Operational state of the interface.

jnxJVAECNifAdminStatus

1.3.6.1.4.1.2636.3.69.2.1.1.3.1.4

INTEGER0 = down1 = up · Integer32

Administrative state of the interface.

jnxJVAECNifLinkDetect

1.3.6.1.4.1.2636.3.69.2.1.1.3.1.5

TruthValue1 = true2 = falseRepresents a boolean value. · Integer32

Link presence, True if present else False. This field is meaningless when the interface is administered down.

jnxJVAECNStorageLow

1.3.6.1.4.1.2636.3.69.2.0.9

This notification is generated whenever storage space falls below threshold.

jnxJVAECNSysId

1.3.6.1.4.1.2636.3.69.2.1.1.1.1.1

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (1..32) · OCTET STRING · hint 255a

Id of the Compute Node.

jnxJVAECNFileSysId

1.3.6.1.4.1.2636.3.69.2.1.1.4.1.1

INTEGER (1..127) · Integer32

An unique identifier for the file system.

jnxJVAECNFileSysMountPoint

1.3.6.1.4.1.2636.3.69.2.1.1.4.1.2

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (1..127) · OCTET STRING · hint 255a

The Filesystem path where the file system is mounted.

jnxJVAECNFileSysSize

1.3.6.1.4.1.2636.3.69.2.1.1.4.1.3

Gauge32 · KB

Total storage capacity of the file system, in kilo bytes.

jnxJVAECNFileSysUsed

1.3.6.1.4.1.2636.3.69.2.1.1.4.1.4

Gauge32 · KB

Used Storage capacity of the file system, in kilo bytes.

jnxJVAECNFileSysFree

1.3.6.1.4.1.2636.3.69.2.1.1.4.1.5

Gauge32 · KB

Unused Storage capacity of the file system, in kilo bytes.

jnxJVAECNFileSysUsedPr

1.3.6.1.4.1.2636.3.69.2.1.1.4.1.6

INTEGER (0..100) · Integer32 · %

Used Storage capacity of the file system, in percentage.

jnxJVAECNStorageOk

1.3.6.1.4.1.2636.3.69.2.0.10

This notification is generated whenever storage space recovers and previously a jnxJVAECNStorageLow was reported.

jnxJVAECNSysId

1.3.6.1.4.1.2636.3.69.2.1.1.1.1.1

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (1..32) · OCTET STRING · hint 255a

Id of the Compute Node.

jnxJVAECNFileSysId

1.3.6.1.4.1.2636.3.69.2.1.1.4.1.1

INTEGER (1..127) · Integer32

An unique identifier for the file system.

jnxJVAECNFileSysMountPoint

1.3.6.1.4.1.2636.3.69.2.1.1.4.1.2

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (1..127) · OCTET STRING · hint 255a

The Filesystem path where the file system is mounted.

jnxJVAECNFileSysSize

1.3.6.1.4.1.2636.3.69.2.1.1.4.1.3

Gauge32 · KB

Total storage capacity of the file system, in kilo bytes.

jnxJVAECNFileSysUsed

1.3.6.1.4.1.2636.3.69.2.1.1.4.1.4

Gauge32 · KB

Used Storage capacity of the file system, in kilo bytes.

jnxJVAECNFileSysFree

1.3.6.1.4.1.2636.3.69.2.1.1.4.1.5

Gauge32 · KB

Unused Storage capacity of the file system, in kilo bytes.

jnxJVAECNFileSysUsedPr

1.3.6.1.4.1.2636.3.69.2.1.1.4.1.6

INTEGER (0..100) · Integer32 · %

Used Storage capacity of the file system, in percentage.

jnxJVAECNRaidError

1.3.6.1.4.1.2636.3.69.2.0.11

This notification is generated whenever raid array degradation or failure is detected.

jnxJVAECNSysId

1.3.6.1.4.1.2636.3.69.2.1.1.1.1.1

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (1..32) · OCTET STRING · hint 255a

Id of the Compute Node.

jnxJVAECNRaidId

1.3.6.1.4.1.2636.3.69.2.1.1.6.1.1

INTEGER (1..15) · Integer32

The unique identifier for this raid array.

jnxJVAECNRaidName

1.3.6.1.4.1.2636.3.69.2.1.1.6.1.2

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..64) · OCTET STRING · hint 255a

Name of the raid array.

jnxJVAECNRaidState

1.3.6.1.4.1.2636.3.69.2.1.1.6.1.3

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..64) · OCTET STRING · hint 255a

State of the raid array.

jnxJVAECNRaidOSPath

1.3.6.1.4.1.2636.3.69.2.1.1.6.1.9

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (1..127) · OCTET STRING · hint 255a

The raid device disk path.

jnxJVAECNRaidOk

1.3.6.1.4.1.2636.3.69.2.0.12

This notification is generated whenever raid array recovers and previously a jnxJVAECNRaidError was reported.

jnxJVAECNSysId

1.3.6.1.4.1.2636.3.69.2.1.1.1.1.1

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (1..32) · OCTET STRING · hint 255a

Id of the Compute Node.

jnxJVAECNRaidId

1.3.6.1.4.1.2636.3.69.2.1.1.6.1.1

INTEGER (1..15) · Integer32

The unique identifier for this raid array.

jnxJVAECNRaidName

1.3.6.1.4.1.2636.3.69.2.1.1.6.1.2

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..64) · OCTET STRING · hint 255a

Name of the raid array.

jnxJVAECNRaidState

1.3.6.1.4.1.2636.3.69.2.1.1.6.1.3

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..64) · OCTET STRING · hint 255a

State of the raid array.

jnxJVAECNRaidOSPath

1.3.6.1.4.1.2636.3.69.2.1.1.6.1.9

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (1..127) · OCTET STRING · hint 255a

The raid device disk path.

jnxJVAECNSensorAlert

1.3.6.1.4.1.2636.3.69.2.0.13

This notification is generated whenever sensor reading is not within the normal operating range.

jnxJVAECNSysId

1.3.6.1.4.1.2636.3.69.2.1.1.1.1.1

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (1..32) · OCTET STRING · hint 255a

Id of the Compute Node.

jnxJVAECNSensorId

1.3.6.1.4.1.2636.3.69.2.1.1.7.1.1

INTEGER (1..65535) · Integer32

The unique identifier for this sensor.

jnxJVAECNSensorValue

1.3.6.1.4.1.2636.3.69.2.1.1.7.1.3

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..127) · OCTET STRING · hint 255a

Sensor reading.

jnxJVAECNSensorType

1.3.6.1.4.1.2636.3.69.2.1.1.7.1.2

INTEGER0 = voltage1 = temperature2 = fan · Integer32

Type of the sensor.

jnxJVAECNSensorRange

1.3.6.1.4.1.2636.3.69.2.1.1.7.1.4

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..32) · OCTET STRING · hint 255a

Normal operating range for the sensor, traps are raised the reading is no within this range.

jnxJVAECNSensorDesc

1.3.6.1.4.1.2636.3.69.2.1.1.7.1.5

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..127) · OCTET STRING · hint 255a

Description of the sensor.

jnxJVAECNSensorOk

1.3.6.1.4.1.2636.3.69.2.0.14

This notification is generated whenever sensor reading recovers and previously a jnxJVAECNSensorAlert was reported.

jnxJVAECNSysId

1.3.6.1.4.1.2636.3.69.2.1.1.1.1.1

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (1..32) · OCTET STRING · hint 255a

Id of the Compute Node.

jnxJVAECNSensorId

1.3.6.1.4.1.2636.3.69.2.1.1.7.1.1

INTEGER (1..65535) · Integer32

The unique identifier for this sensor.

jnxJVAECNSensorValue

1.3.6.1.4.1.2636.3.69.2.1.1.7.1.3

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..127) · OCTET STRING · hint 255a

Sensor reading.

jnxJVAECNSensorType

1.3.6.1.4.1.2636.3.69.2.1.1.7.1.2

INTEGER0 = voltage1 = temperature2 = fan · Integer32

Type of the sensor.

jnxJVAECNSensorRange

1.3.6.1.4.1.2636.3.69.2.1.1.7.1.4

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..32) · OCTET STRING · hint 255a

Normal operating range for the sensor, traps are raised the reading is no within this range.

jnxJVAECNSensorDesc

1.3.6.1.4.1.2636.3.69.2.1.1.7.1.5

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..127) · OCTET STRING · hint 255a

Description of the sensor.

↑ To TOC