DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The Routing instance string for routing mac limit trap.
jnxl2aldBridgeDomain
1.3.6.1.4.1.2636.3.48.1.1.3
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The bridge domain string for routing mac limit trap.
jnxl2aldLogicalRouter
1.3.6.1.4.1.2636.3.48.1.1.4
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The logical router string for routing mac limit trap.
jnxl2aldMacLimit
1.3.6.1.4.1.2636.3.48.1.1.5
Unsigned32
The mac limit count for routing instance.
jnxl2aldGbMacLimit
1.3.6.1.4.1.2636.3.48.1.1.6
Unsigned32
The mac limit count for the system.
jnxl2aldMacAdress
1.3.6.1.4.1.2636.3.48.1.1.7
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The offending mac causing mac move threshold trap.
jnxL2aldMacGlobalFeatureEnabled
1.3.6.1.4.1.2636.3.48.1.2.1.1
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
Indicates whether the MAC notification feature is currently running in the device.
Setting this object to false(2) disables the MAC notification feature globally.
Setting this object to true(1) will start the MAC notification feature running in the device. If the feature is already running, setting to true(1) has no effect.
jnxL2aldMacNotificationInterval
1.3.6.1.4.1.2636.3.48.1.2.1.2
Unsigned32 · seconds
This object specifies the maximum interval of time between jnxL2aldMacChangedNotifications being generated by the device. If the value of jnxNotificationsEnabled is true(1), the device will send out the generated jnxL2aldMacChangedNotifications and archive the MAC change notification events in the jnxMacHistoryTable. If the value of jnxNotificationEnabled is false(2), the device will not send out the generated jnxL2aldMacChangedNotifications but it will archive these events in the jnxMacHistoryTable.
If the value of this object is equal to 0, the device will generate jnxL2aldMacChangedNotifications and archive the MAC change notification events in the jnxMacHistoryTable as soon as there is MAC address learnt or removed by the device.
If the value of this object is greater than 0, the device will wait for a period of time equal to the value of this object before generate the jnxL2aldMacChangedNotifications and archive the MAC change notification events in the jnxMacHistoryTable.
jnxL2aldMacAddressesLearnt
1.3.6.1.4.1.2636.3.48.1.2.1.3
Counter64 (0..18446744073709551615)
Indicates the number of MAC addresses learnt by the device.
jnxL2aldMacAddressesRemoved
1.3.6.1.4.1.2636.3.48.1.2.1.4
Counter64 (0..18446744073709551615)
Indicates the number of MAC addresses removed from the forwarding database.
jnxL2aldMacNotificationsEnabled
1.3.6.1.4.1.2636.3.48.1.2.1.5
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
Indicates whether jnxL2aldMacChangedNotification notifications will or will not be sent when there are MAC addresses learnt or removed from the device's forwarding database. Disabling notifications does not prevent the MAC address info from being added to the jnxMacHistoryTable.
jnxL2aldMacNotificationsSent
1.3.6.1.4.1.2636.3.48.1.2.1.6
Counter64 (0..18446744073709551615)
Indicates the number of jnxl2aldMacChangedNotifications sent out by the device.
jnxL2aldMacHistTableMaxLength
1.3.6.1.4.1.2636.3.48.1.2.1.7
Unsigned32 (0..500) · entries
The upper limit on the number of entries that the jnxMacHistoryTable may contain. A value of 0 will prevent any history from being retained. When this table is full, the oldest entry will be deleted and a new one will be created.
jnxL2aldMacAddressesUpdated
1.3.6.1.4.1.2636.3.48.1.2.1.9
Counter64 (0..18446744073709551615)
Indicates the number of MAC addresses updated by the device.
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
jnxl2aldIntfLogicalRouter
1.3.6.1.4.1.2636.3.48.1.1.1.1.1
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The logical router string for interface table.
jnxl2aldIntfRoutingInst
1.3.6.1.4.1.2636.3.48.1.1.1.1.2
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The routing instance string for interface table.
jnxl2aldIntfBridgeDomain
1.3.6.1.4.1.2636.3.48.1.1.1.1.3
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The bridge domain string for interface table.
jnxl2aldIntfMacLimit
1.3.6.1.4.1.2636.3.48.1.1.1.1.4
Unsigned32
The MAC limit count for the interface table.
jnxl2aldIntfMacPinningIntf
1.3.6.1.4.1.2636.3.48.1.1.1.1.5
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The interface on which MAC Pinning is enabled.
jnxl2aldIntfDiscardIntf
1.3.6.1.4.1.2636.3.48.1.1.1.1.6
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The interface on which MAC is discarded due to MAC Pinning.
jnxL2aldMacHistoryTable
1.3.6.1.4.1.2636.3.48.1.2.1.8
Index: jnxL2aldHistIndex
This table will archive the MAC change notification events generated by this device. The MAC change notification events are archived here even if jnxMacChangesNotifications are not actually sent.
jnxL2aldHistIndex
1.3.6.1.4.1.2636.3.48.1.2.1.8.1.1
Unsigned32 (1..4294967295)
An index that uniquely identifies a MAC change notification event previously generated by the device. This index starts at 1 and increases by one when a MAC change notification is generated. When it reaches the maximum value, the agent wraps the value back to 1.
jnxL2aldHistMacChangedMsg
1.3.6.1.4.1.2636.3.48.1.2.1.8.1.2
OCTET STRING SIZE (1..512)
This object contains the information of a MAC change notification event. It consists of several tuples packed together in the format of '<tuple1><tuple2>...'.
Each tuple consist of 13 octets in the format of '<operation><VLAN INDEX><MAC><dot1dBasePort><VLAN TAG>' where
<operation> is of size 1 octet and supports the following values 0 - End of MIB object. 1 - MAC learnt. 2 - MAC removed. 3 - MAC updated.
<VLAN INDEX> is the index of the VLAN which the MAC address is belonged to and has size of 2 octet.
<MAC> is the Layer2 Mac Address and has size of 6 octets.
<dot1dBasePort> is the value of dot1dBasePort for the interface from which the MAC address is learnt and has size of 2 octets.
<VLAN TAG> is the tag of the VLAN which the MAC address is belonged to and has size of 2 octet.
jnxL2aldHistTimestamp
1.3.6.1.4.1.2636.3.48.1.2.1.8.1.3
TimeTicks
The value of sysUpTime when the jnxL2aldMacChangedNotification containing the information denoted by the jnxHistMacChangedMsg object in this entry was generated.
jnxL2aldVlanTable
1.3.6.1.4.1.2636.3.48.1.3.1
Index: jnxL2aldVlanID
A table of VLAN names and characteristics.
jnxL2aldVlanID
1.3.6.1.4.1.2636.3.48.1.3.1.1.1
Unsigned32 (1..4094)
This is the locally significant ID that is used internally by this device to reference this VLAN.
jnxL2aldVlanName
1.3.6.1.4.1.2636.3.48.1.3.1.1.2
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (1..255) · OCTET STRING · hint 255a
Vlan name is the textual name and this is the identifier that the user of a configuration utility will use.
jnxL2aldVlanTag
1.3.6.1.4.1.2636.3.48.1.3.1.1.3
Integer32 (1..4094)
This is the locally significant ID that is used internally by this device to reference this VLAN.
jnxL2aldVlanType
1.3.6.1.4.1.2636.3.48.1.3.1.1.4
INTEGER1 = static2 = dynamic · Integer32
The vlan type can be Static (1) Dynamic(2)
jnxL2aldVlanFdbId
1.3.6.1.4.1.2636.3.48.1.3.1.1.5
Unsigned32 (1..4294967295)
The identity of the Filtering Database dot1qFdbTable (A table that contains configuration and control information for each Filtering Database currently operating on this device)
Trap details
jnxl2aldRoutingInstMacLimit
1.3.6.1.4.1.2636.3.48.1.0.1
This notification is generated when the MAC limit for given routing instance (jnxl2aldRoutingInst) is reached. This trap is send only once we exceed the limit value.
jnxl2aldLogicalRouter
1.3.6.1.4.1.2636.3.48.1.1.4
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The logical router string for routing mac limit trap.
jnxl2aldRoutingInst
1.3.6.1.4.1.2636.3.48.1.1.2
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The Routing instance string for routing mac limit trap.
jnxl2aldBridgeDomain
1.3.6.1.4.1.2636.3.48.1.1.3
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The bridge domain string for routing mac limit trap.
jnxl2aldMacLimit
1.3.6.1.4.1.2636.3.48.1.1.5
Unsigned32
The mac limit count for routing instance.
jnxl2aldInterfaceMacLimit
1.3.6.1.4.1.2636.3.48.1.0.2
This notification is generated when the MAC limit for the given physical interface (jnxl2aldInterfaceMacLimit) is reached. This trap is send only once we exceed the limit value.
jnxl2aldIntfLogicalRouter
1.3.6.1.4.1.2636.3.48.1.1.1.1.1
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The logical router string for interface table.
jnxl2aldIntfRoutingInst
1.3.6.1.4.1.2636.3.48.1.1.1.1.2
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The routing instance string for interface table.
jnxl2aldIntfBridgeDomain
1.3.6.1.4.1.2636.3.48.1.1.1.1.3
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The bridge domain string for interface table.
ifDescr
1.3.6.1.2.1.2.2.1.2
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the interface hardware/software.
jnxl2aldIntfMacLimit
1.3.6.1.4.1.2636.3.48.1.1.1.1.4
Unsigned32
The MAC limit count for the interface table.
jnxl2aldGlobalMacLimit
1.3.6.1.4.1.2636.3.48.1.0.3
This notification is generated when the MAC limit for the entire system is reached. This trap is send only once we exceed the limit value.
jnxl2aldGbMacLimit
1.3.6.1.4.1.2636.3.48.1.1.6
Unsigned32
The mac limit count for the system.
jnxl2aldMacMoveThreshold
1.3.6.1.4.1.2636.3.48.1.0.4
This notification is generated when a mac move reaches threshold. The given interface (ifDescr) will be blocked for the Bridge Domain(jnxl2aldIntfBridgeDomain). This trap is send only once when mac move count exceeds the threshold for the Mac(jnxl2aldMacAdress).
jnxl2aldIntfLogicalRouter
1.3.6.1.4.1.2636.3.48.1.1.1.1.1
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The logical router string for interface table.
jnxl2aldIntfRoutingInst
1.3.6.1.4.1.2636.3.48.1.1.1.1.2
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The routing instance string for interface table.
jnxl2aldIntfBridgeDomain
1.3.6.1.4.1.2636.3.48.1.1.1.1.3
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The bridge domain string for interface table.
ifDescr
1.3.6.1.2.1.2.2.1.2
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the interface hardware/software.
jnxl2aldMacAdress
1.3.6.1.4.1.2636.3.48.1.1.7
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The offending mac causing mac move threshold trap.
jnxL2aldMacChangedNotification
1.3.6.1.4.1.2636.3.48.1.0.5
This notification is generated when there is enough MAC address information to fully occupy a maximum size SNMP trap message. This notification is also generated when there is at least one MAC address changed or removed and the amount of time elapsed from the previous notification is greater than the maximum wait time denoted by jnxNotificationInterval object.
If there are more MAC addresses information than can fit into one cmmHistTrapContent object, then multiple notifications will be generated.
jnxL2aldHistMacChangedMsg
1.3.6.1.4.1.2636.3.48.1.2.1.8.1.2
OCTET STRING SIZE (1..512)
This object contains the information of a MAC change notification event. It consists of several tuples packed together in the format of '<tuple1><tuple2>...'.
Each tuple consist of 13 octets in the format of '<operation><VLAN INDEX><MAC><dot1dBasePort><VLAN TAG>' where
<operation> is of size 1 octet and supports the following values 0 - End of MIB object. 1 - MAC learnt. 2 - MAC removed. 3 - MAC updated.
<VLAN INDEX> is the index of the VLAN which the MAC address is belonged to and has size of 2 octet.
<MAC> is the Layer2 Mac Address and has size of 6 octets.
<dot1dBasePort> is the value of dot1dBasePort for the interface from which the MAC address is learnt and has size of 2 octets.
<VLAN TAG> is the tag of the VLAN which the MAC address is belonged to and has size of 2 octet.
jnxL2aldHistTimestamp
1.3.6.1.4.1.2636.3.48.1.2.1.8.1.3
TimeTicks
The value of sysUpTime when the jnxL2aldMacChangedNotification containing the information denoted by the jnxHistMacChangedMsg object in this entry was generated.
jnxl2aldMacPinningdiscard
1.3.6.1.4.1.2636.3.48.1.0.6
This notification is generated for discarding packets in a bridge domain over an IFL for MACs when learned over MAC pinning enabled interface and same MACs are also seen over any other interfaces in the same bridge domain. This trap is generated in configured interval of time when packets are discarded over an IFL continuously.
jnxl2aldIntfLogicalRouter
1.3.6.1.4.1.2636.3.48.1.1.1.1.1
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The logical router string for interface table.
jnxl2aldIntfRoutingInst
1.3.6.1.4.1.2636.3.48.1.1.1.1.2
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The routing instance string for interface table.
jnxl2aldIntfBridgeDomain
1.3.6.1.4.1.2636.3.48.1.1.1.1.3
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The bridge domain string for interface table.
jnxl2aldMacAdress
1.3.6.1.4.1.2636.3.48.1.1.7
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The offending mac causing mac move threshold trap.
jnxl2aldIntfMacPinningIntf
1.3.6.1.4.1.2636.3.48.1.1.1.1.5
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The interface on which MAC Pinning is enabled.
jnxl2aldIntfDiscardIntf
1.3.6.1.4.1.2636.3.48.1.1.1.1.6
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The interface on which MAC is discarded due to MAC Pinning.