jnxLsysSpNATconebindUsedAmount
1.3.6.1.4.1.2636.3.39.1.17.15.1.2.1
Unsigned32
The NAT-cone-bind resource consumption over all LSYS.
JUNIPER-LSYSSP-NATCONEBIND-MIB
2010-05-19
This module defines the NAT-cone-bind-specific MIB for Juniper Enterprise Logical-System (LSYS) security profiles. Juniper documentation is recommended as the reference. The LSYS security profile provides various static and dynamic resource management by observing resource quota limits. Security NAT-cone-bind resource is the focus in this MIB.
Download JUNIPER-LSYSSP-NATCONEBIND-MIB.txt Open JUNIPER-LSYSSP-NATCONEBIND-MIB.txt in a new tab
Scalars (7)
Tables (1)
| Name | OID |
|---|---|
| jnxLsysSpNATconebindTable | 1.3.6.1.4.1.2636.3.39.1.17.15.1.1.1 |
END OF TOC
Scalar details
jnxLsysSpNATconebindMaxQuota
1.3.6.1.4.1.2636.3.39.1.17.15.1.2.2
Unsigned32
The NAT-cone-bind resource maximum quota for the whole device for all LSYS.
jnxLsysSpNATconebindAvailableAmount
1.3.6.1.4.1.2636.3.39.1.17.15.1.2.3
Unsigned32
The NAT-cone-bind resource available in the whole device.
jnxLsysSpNATconebindHeaviestUsage
1.3.6.1.4.1.2636.3.39.1.17.15.1.2.4
Unsigned32
The most amount of NAT-cone-bind resource consumed of a LSYS.
jnxLsysSpNATconebindHeaviestUser
1.3.6.1.4.1.2636.3.39.1.17.15.1.2.5
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (1..64) · OCTET STRING · hint 255a
The LSYS name that consume the most NAT-cone-bind resource.
jnxLsysSpNATconebindLightestUsage
1.3.6.1.4.1.2636.3.39.1.17.15.1.2.6
Unsigned32
The least amount of NAT-cone-bind resource consumed of a LSYS.
jnxLsysSpNATconebindLightestUser
1.3.6.1.4.1.2636.3.39.1.17.15.1.2.7
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (1..64) · OCTET STRING · hint 255a
The LSYS name that consume the least NAT-cone-bind resource.
Table details
jnxLsysSpNATconebindTable
1.3.6.1.4.1.2636.3.39.1.17.15.1.1.1
Index: IMPLIED jnxLsysSpNATconebindLsysName
LSYSPROFILE NAT-cone-bind objects for NAT-cone-bind resource consumption per LSYS.
jnxLsysSpNATconebindLsysName
1.3.6.1.4.1.2636.3.39.1.17.15.1.1.1.1.1
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (1..64) · OCTET STRING · hint 255a
The name of the logical system for which NAT-cone-bind resource information is retrieved.
jnxLsysSpNATconebindProfileName
1.3.6.1.4.1.2636.3.39.1.17.15.1.1.1.1.2
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (1..32) · OCTET STRING · hint 255a
The security profile name string for the LSYS.
jnxLsysSpNATconebindUsage
1.3.6.1.4.1.2636.3.39.1.17.15.1.1.1.1.3
Unsigned32
The current resource usage count for the LSYS.
jnxLsysSpNATconebindReserved
1.3.6.1.4.1.2636.3.39.1.17.15.1.1.1.1.4
Unsigned32
The reserved resource count for the LSYS.
jnxLsysSpNATconebindMaximum
1.3.6.1.4.1.2636.3.39.1.17.15.1.1.1.1.5
Unsigned32
The maximum allowed resource usage count for the LSYS.