jnxLSYSVDLsysCount
1.3.6.1.4.1.2636.3.39.1.24.1.2.1
Unsigned32
Total LSYS count.
JUNIPER-LSYSVD-MIB
2021-02-16
This module defines the LSYS Virtualization Device specific MIB for Juniper Enterprise, Logical-System (LSYS), as well as their assigned security profiles. Juniper documentation is recommended as the reference. The total count and names of the configured LSYS is the focus in this MIB.
Download JUNIPER-LSYSVD-MIB.txt Open JUNIPER-LSYSVD-MIB.txt in a new tab
Scalars (6)
Tables (1)
| Name | OID |
|---|---|
| jnxLSYSVDBasicInfoTable | 1.3.6.1.4.1.2636.3.39.1.24.1.1.1 |
END OF TOC
Scalar details
jnxLSYSVDTsysCount
1.3.6.1.4.1.2636.3.39.1.24.1.2.2
Unsigned32
Total TSYS count.
jnxLSYSVDSecProfileCount
1.3.6.1.4.1.2636.3.39.1.24.1.2.3
Unsigned32
Total security-profile count.
jnxLSYSVDLsysMaximum
1.3.6.1.4.1.2636.3.39.1.24.1.2.4
Unsigned32
Maximum allowed logical-systems.
jnxLSYSVDTsysMaximum
1.3.6.1.4.1.2636.3.39.1.24.1.2.5
Unsigned32
Maximum allowed tenants.
jnxLSYSVDSecProfileMaximum
1.3.6.1.4.1.2636.3.39.1.24.1.2.6
Unsigned32
Maximum allowed security-profiles.
Table details
jnxLSYSVDBasicInfoTable
1.3.6.1.4.1.2636.3.39.1.24.1.1.1
Index: jnxLSYSVDKey
LSYS Virtual Device basic information table, or name table.
jnxLSYSVDKey
1.3.6.1.4.1.2636.3.39.1.24.1.1.1.1.1
LsysVDIndexA unique value, non-negative, for each logical-system or tenant in the managed system. It is recommended that values are assigned contiguously starting from 0. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (0..65535) · Unsigned32 · hint d
The index and name of the logical system.
jnxLSYSVDName
1.3.6.1.4.1.2636.3.39.1.24.1.1.1.1.2
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (1..64) · OCTET STRING · hint 255a
The name of the logical system.
jnxLSYSVDMode
1.3.6.1.4.1.2636.3.39.1.24.1.1.1.1.3
INTEGER-1 = unknown0 = root1 = logical-system2 = tenant-system · Integer32
The mode of root, user-created logical-system(LSYS) or tenant-system(TSYS).
jnxLSYSVDSecProfileName
1.3.6.1.4.1.2636.3.39.1.24.1.1.1.1.4
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (1..32) · OCTET STRING · hint 255a
The security profile name assigned for the logical system or tenant.