EZ5 MIB Catalog

JUNIPER-MOBILE-GATEWAY-SM-IP-POOL-MIB

2011-11-15

This module defines objects pertaining to Mobile-Edge Subscriber Management IP pool Services

Download JUNIPER-MOBILE-GATEWAY-SM-IP-POOL-MIB.txt Open JUNIPER-MOBILE-GATEWAY-SM-IP-POOL-MIB.txt in a new tab

SCALARS (25) · TABLES (3) · TRAPS (7)

Scalars (25)

NameOID
jnxMbgSMIPPoolThresholdPoolName1.3.6.1.4.1.2636.3.66.5.1.2.1
jnxMbgSMIPPoolThresholdLSName1.3.6.1.4.1.2636.3.66.5.1.2.2
jnxMbgSMIPPoolThresholdRIName1.3.6.1.4.1.2636.3.66.5.1.2.3
jnxMbgSMIPPoolConfiguredThreshold1.3.6.1.4.1.2636.3.66.5.1.2.4
jnxMbgSMIPPoolCurrentThreshold1.3.6.1.4.1.2636.3.66.5.1.2.5
jnxMbgSMIPPoolMMPoolName1.3.6.1.4.1.2636.3.66.5.1.2.6
jnxMbgSMIPPoolMMLSName1.3.6.1.4.1.2636.3.66.5.1.2.7
jnxMbgSMIPPoolMMRIName1.3.6.1.4.1.2636.3.66.5.1.2.8
jnxMbgSMIPPoolPrevMMState1.3.6.1.4.1.2636.3.66.5.1.2.9
jnxMbgSMIPPoolNewMMState1.3.6.1.4.1.2636.3.66.5.1.2.10
jnxMbgSMIPRangeHiThresRangeName1.3.6.1.4.1.2636.3.66.5.1.2.11
jnxMbgSMIPRangeHiThresPoolName1.3.6.1.4.1.2636.3.66.5.1.2.12
jnxMbgSMIPRangeHiLSName1.3.6.1.4.1.2636.3.66.5.1.2.13
jnxMbgSMIPRangeHiRIName1.3.6.1.4.1.2636.3.66.5.1.2.14
jnxMbgSMIPRangeHiCfgThres1.3.6.1.4.1.2636.3.66.5.1.2.15
jnxMbgSMIPRangeHiCurrUtil1.3.6.1.4.1.2636.3.66.5.1.2.16
jnxMbgSMIPRangeLowThresRangeName1.3.6.1.4.1.2636.3.66.5.1.2.17
jnxMbgSMIPRangeLowThresPoolName1.3.6.1.4.1.2636.3.66.5.1.2.18
jnxMbgSMIPRangeLowLSName1.3.6.1.4.1.2636.3.66.5.1.2.19
jnxMbgSMIPRangeLowRIName1.3.6.1.4.1.2636.3.66.5.1.2.20
jnxMbgSMIPRangeLowCfgThres1.3.6.1.4.1.2636.3.66.5.1.2.21
jnxMbgSMIPRangeLowCurrUtil1.3.6.1.4.1.2636.3.66.5.1.2.22
jnxMbgSMIPPoolHTCfgThres1.3.6.1.4.1.2636.3.66.5.1.2.23
jnxMbgSMIPPoolCurrUtil1.3.6.1.4.1.2636.3.66.5.1.2.24
jnxMbgSMIPPoolLTCfgThres1.3.6.1.4.1.2636.3.66.5.1.2.25

Tables (3)

NameOID
jnxMbgSMIPPoolTable1.3.6.1.4.1.2636.3.66.5.1.1
jnxMbgIPPoolTable1.3.6.1.4.1.2636.3.66.5.1.3
jnxMbgIPPoolRangeTable1.3.6.1.4.1.2636.3.66.5.1.4

Traps (7)

NameOID
jnxMbgSMIPPoolThresholdExceeded(deprecated)1.3.6.1.4.1.2636.3.66.5.0.1
jnxMbgSMIPPoolMMStateChange1.3.6.1.4.1.2636.3.66.5.0.2
jnxMbgSMIPRangeHighThresExcd1.3.6.1.4.1.2636.3.66.5.0.3
jnxMbgSMIPRangeLowThresRchd1.3.6.1.4.1.2636.3.66.5.0.4
jnxMbgSMIPPoolHighThresExcd1.3.6.1.4.1.2636.3.66.5.0.5
jnxMbgSMIPPoolLowThresRchd1.3.6.1.4.1.2636.3.66.5.0.6
jnxMbgIPPoolExhausted1.3.6.1.4.1.2636.3.66.5.0.7

END OF TOC

Scalar details

jnxMbgSMIPPoolThresholdPoolName

1.3.6.1.4.1.2636.3.66.5.1.2.1

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

The name which identifies the address pool on the mobile-gateway for which the threshold was exceeded.

jnxMbgSMIPPoolThresholdLSName

1.3.6.1.4.1.2636.3.66.5.1.2.2

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

The name which identifies the logical-system on the mobile-gateway in which the address pool threshold was exceeded.

jnxMbgSMIPPoolThresholdRIName

1.3.6.1.4.1.2636.3.66.5.1.2.3

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

The name which identifies the routing instance on the mobile-gateway in which the address pool threshold was exceeded.

jnxMbgSMIPPoolConfiguredThreshold

1.3.6.1.4.1.2636.3.66.5.1.2.4

Unsigned32 · percent

The threshold value configured for an address pool on the mobile gateway exceeding which a notification is generated.

jnxMbgSMIPPoolCurrentThreshold

1.3.6.1.4.1.2636.3.66.5.1.2.5

Unsigned32 · percent

The current threshold value for an address pool on the mobile gateway. This can be equal to or greater than the configured threshold value.

jnxMbgSMIPPoolMMPoolName

1.3.6.1.4.1.2636.3.66.5.1.2.6

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

The name which identifies the address pool on the mobile-gateway which underwent a change in the maintenance-mode state.

jnxMbgSMIPPoolMMLSName

1.3.6.1.4.1.2636.3.66.5.1.2.7

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

The name which identifies the logical-system on the mobile-gateway which underwent a change in the maintenance-mode state.

jnxMbgSMIPPoolMMRIName

1.3.6.1.4.1.2636.3.66.5.1.2.8

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

The name which identifies the routing instance on the mobile-gateway which underwent a change in the maintenance-mode state.

jnxMbgSMIPPoolPrevMMState

1.3.6.1.4.1.2636.3.66.5.1.2.9

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

A string that indicates the maintenance-mode state .

jnxMbgSMIPPoolNewMMState

1.3.6.1.4.1.2636.3.66.5.1.2.10

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

A string that indicates the maintenance-mode state .

jnxMbgSMIPRangeHiThresRangeName

1.3.6.1.4.1.2636.3.66.5.1.2.11

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

The name which identifies the address pool's range on the mobile-gateway for which the threshold was exceeded.

jnxMbgSMIPRangeHiThresPoolName

1.3.6.1.4.1.2636.3.66.5.1.2.12

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

The name which identifies the address pool on the mobile-gateway, whose range threshold was exceeded.

jnxMbgSMIPRangeHiLSName

1.3.6.1.4.1.2636.3.66.5.1.2.13

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

The name which identifies the logical-system on the mobile-gateway in which the address range threshold was exceeded.

jnxMbgSMIPRangeHiRIName

1.3.6.1.4.1.2636.3.66.5.1.2.14

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

The name which identifies the routing instance on the mobile-gateway in which the address range threshold was exceeded.

jnxMbgSMIPRangeHiCfgThres

1.3.6.1.4.1.2636.3.66.5.1.2.15

Unsigned32 · percent

The threshold value configured for an address pool range on the mobile gateway exceeding which a notification is generated.

jnxMbgSMIPRangeHiCurrUtil

1.3.6.1.4.1.2636.3.66.5.1.2.16

Unsigned32 · percent

The current threshold value for an address pool range on the mobile gateway. This can be equal to or greater than the configured threshold value.

jnxMbgSMIPRangeLowThresRangeName

1.3.6.1.4.1.2636.3.66.5.1.2.17

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

The name which identifies the address pool's range on the mobile-gateway for which the low threshold was reached.

jnxMbgSMIPRangeLowThresPoolName

1.3.6.1.4.1.2636.3.66.5.1.2.18

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

The name which identifies the address pool on the mobile-gateway, whose range low threshold was reached.

jnxMbgSMIPRangeLowLSName

1.3.6.1.4.1.2636.3.66.5.1.2.19

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

The name which identifies the logical-system on the mobile-gateway in which the address range low threshold was reached.

jnxMbgSMIPRangeLowRIName

1.3.6.1.4.1.2636.3.66.5.1.2.20

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

The name which identifies the routing instance on the mobile-gateway in which the address range low threshold was reached.

jnxMbgSMIPRangeLowCfgThres

1.3.6.1.4.1.2636.3.66.5.1.2.21

Unsigned32 · percent

The threshold value configured for an address pool range on the mobile gateway reaching which a notification is generated.

jnxMbgSMIPRangeLowCurrUtil

1.3.6.1.4.1.2636.3.66.5.1.2.22

Unsigned32 · percent

The current threshold value for an address pool range on the mobile gateway. This can be equal to or greater than the configured threshold value.

jnxMbgSMIPPoolHTCfgThres

1.3.6.1.4.1.2636.3.66.5.1.2.23

Unsigned32 · percent

The threshold value configured for an address pool on the mobile gateway exceeding which a notification is generated.

jnxMbgSMIPPoolCurrUtil

1.3.6.1.4.1.2636.3.66.5.1.2.24

Unsigned32 · percent

The current utilization value for an address pool on the mobile gateway. This can be equal to or greater than the configured threshold value.

jnxMbgSMIPPoolLTCfgThres

1.3.6.1.4.1.2636.3.66.5.1.2.25

Unsigned32 · percent

The threshold value configured for an address pool on the mobile gateway reaching which a notification is generated.

Table details

jnxMbgSMIPPoolTable

1.3.6.1.4.1.2636.3.66.5.1.1

Index: jnxMbgSMIPPoolLogicalSystem · jnxMbgSMIPPoolRoutingInstance · jnxMbgSMIPPoolName

The table lists local address pools and their statistics

jnxMbgSMIPPoolName

1.3.6.1.4.1.2636.3.66.5.1.1.1.1

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (1..64) · OCTET STRING · hint 255a

A name which identifies this pool on the mobile-gateway.

jnxMbgSMIPPoolLogicalSystem

1.3.6.1.4.1.2636.3.66.5.1.1.1.2

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (1..64) · OCTET STRING · hint 255a

A name which identifies the logical-system to which the address pool belongs.

jnxMbgSMIPPoolRoutingInstance

1.3.6.1.4.1.2636.3.66.5.1.1.1.3

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (1..128) · OCTET STRING · hint 255a

A name which identifies the routing instance to which the address pool belongs.

jnxMbgSMIPPoolType

1.3.6.1.4.1.2636.3.66.5.1.1.1.4

InetAddressType0 = unknown1 = ipv42 = ipv63 = ipv4z4 = ipv6z16 = dnsA value that represents a type of Internet address. unknown(0) An unknown address type. This value MUST be used if the value of the corresponding InetAddress object is a zero-length string. It may also be used to indicate an IP address that is not in one of the formats defined below. ipv4(1) An IPv4 address as defined by the InetAddressIPv4 textual convention. ipv6(2) An IPv6 address as defined by the InetAddressIPv6 textual convention. ipv4z(3) A non-global IPv4 address including a zone index as defined by the InetAddressIPv4z textual convention. ipv6z(4) A non-global IPv6 address including a zone index as defined by the InetAddressIPv6z textual convention. dns(16) A DNS domain name as defined by the InetAddressDNS textual convention. Each definition of a concrete InetAddressType value must be accompanied by a definition of a textual convention for use with that InetAddressType. To support future extensions, the InetAddressType textual convention SHOULD NOT be sub-typed in object type definitions. It MAY be sub-typed in compliance statements in order to require only a subset of these address types for a compliant implementation. Implementations must ensure that InetAddressType objects and any dependent objects (e.g., InetAddress objects) are consistent. An inconsistentValue error must be generated if an attempt to change an InetAddressType object would, for example, lead to an undefined InetAddress value. In particular, InetAddressType/InetAddress pairs must be changed together if the address type changes (e.g., from ipv6(2) to ipv4(1)). · Integer32

Indicates whether this pool entry is of type ipv4 or ipv6.

jnxMbgSMIPPoolFree

1.3.6.1.4.1.2636.3.66.5.1.1.1.5

Unsigned32

Total number of free addresses in this pool entry.

jnxMbgSMIPPoolInUse

1.3.6.1.4.1.2636.3.66.5.1.1.1.6

Unsigned32

Total number of used addresses in this pool entry.

jnxMbgSMIPPoolUtil

1.3.6.1.4.1.2636.3.66.5.1.1.1.7

Unsigned32 · percent

Percentage utilization for this pool entry.

jnxMbgIPPoolTable

1.3.6.1.4.1.2636.3.66.5.1.3

Index: jnxMbgIPPoolId

The table exposes the local address pools attributes and their statistics. This table contains information about local address pools only.

jnxMbgIPPoolId

1.3.6.1.4.1.2636.3.66.5.1.3.1.1

Unsigned32

A Pool Id which identifies a pool on the mobile-gateway.

jnxMbgIPPoolLogicalSystem

1.3.6.1.4.1.2636.3.66.5.1.3.1.2

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

A name which identifies the logical-system to which the address pool belongs on the mobile gateway.

jnxMbgIPPoolRoutingInstance

1.3.6.1.4.1.2636.3.66.5.1.3.1.3

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

A name which identifies the routing instance to which the address pool belongs on the mobile gateway.

jnxMbgIPPoolName

1.3.6.1.4.1.2636.3.66.5.1.3.1.4

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

A name which identifies the pool on the mobile-gateway.

jnxMbgIPPoolType

1.3.6.1.4.1.2636.3.66.5.1.3.1.5

InetAddressType0 = unknown1 = ipv42 = ipv63 = ipv4z4 = ipv6z16 = dnsA value that represents a type of Internet address. unknown(0) An unknown address type. This value MUST be used if the value of the corresponding InetAddress object is a zero-length string. It may also be used to indicate an IP address that is not in one of the formats defined below. ipv4(1) An IPv4 address as defined by the InetAddressIPv4 textual convention. ipv6(2) An IPv6 address as defined by the InetAddressIPv6 textual convention. ipv4z(3) A non-global IPv4 address including a zone index as defined by the InetAddressIPv4z textual convention. ipv6z(4) A non-global IPv6 address including a zone index as defined by the InetAddressIPv6z textual convention. dns(16) A DNS domain name as defined by the InetAddressDNS textual convention. Each definition of a concrete InetAddressType value must be accompanied by a definition of a textual convention for use with that InetAddressType. To support future extensions, the InetAddressType textual convention SHOULD NOT be sub-typed in object type definitions. It MAY be sub-typed in compliance statements in order to require only a subset of these address types for a compliant implementation. Implementations must ensure that InetAddressType objects and any dependent objects (e.g., InetAddress objects) are consistent. An inconsistentValue error must be generated if an attempt to change an InetAddressType object would, for example, lead to an undefined InetAddress value. In particular, InetAddressType/InetAddress pairs must be changed together if the address type changes (e.g., from ipv6(2) to ipv4(1)). · Integer32

The type configured for this pool on the mobile gateway. Types supported are Ipv4(1) or IPv6(2).

jnxMbgIPPoolFree

1.3.6.1.4.1.2636.3.66.5.1.3.1.6

Gauge32

Total number of free addresses in this pool.

jnxMbgIPPoolInUse

1.3.6.1.4.1.2636.3.66.5.1.3.1.7

Gauge32

Total number of used addresses in this pool.

jnxMbgIPPoolUtil

1.3.6.1.4.1.2636.3.66.5.1.3.1.8

Gauge32 · percent

Percentage utilization for this pool.

jnxMbgIPPoolRangeTable

1.3.6.1.4.1.2636.3.66.5.1.4

Index: jnxMbgIPPoolId · jnxMbgIPPoolRangeName

The table exposes the local address pool range's attributes and their statistics. This table contains information about local address pools only.

jnxMbgIPPoolRangeName

1.3.6.1.4.1.2636.3.66.5.1.4.1.1

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (1..64) · OCTET STRING · hint 255a

The name of the local IP address pool range

jnxMbgIPPoolRangeType

1.3.6.1.4.1.2636.3.66.5.1.4.1.2

InetAddressType0 = unknown1 = ipv42 = ipv63 = ipv4z4 = ipv6z16 = dnsA value that represents a type of Internet address. unknown(0) An unknown address type. This value MUST be used if the value of the corresponding InetAddress object is a zero-length string. It may also be used to indicate an IP address that is not in one of the formats defined below. ipv4(1) An IPv4 address as defined by the InetAddressIPv4 textual convention. ipv6(2) An IPv6 address as defined by the InetAddressIPv6 textual convention. ipv4z(3) A non-global IPv4 address including a zone index as defined by the InetAddressIPv4z textual convention. ipv6z(4) A non-global IPv6 address including a zone index as defined by the InetAddressIPv6z textual convention. dns(16) A DNS domain name as defined by the InetAddressDNS textual convention. Each definition of a concrete InetAddressType value must be accompanied by a definition of a textual convention for use with that InetAddressType. To support future extensions, the InetAddressType textual convention SHOULD NOT be sub-typed in object type definitions. It MAY be sub-typed in compliance statements in order to require only a subset of these address types for a compliant implementation. Implementations must ensure that InetAddressType objects and any dependent objects (e.g., InetAddress objects) are consistent. An inconsistentValue error must be generated if an attempt to change an InetAddressType object would, for example, lead to an undefined InetAddress value. In particular, InetAddressType/InetAddress pairs must be changed together if the address type changes (e.g., from ipv6(2) to ipv4(1)). · Integer32

The type configured for this range on the mobile gateway. Types supported are Ipv4(1) or IPv6(2).

jnxMbgIPPoolRangeFree

1.3.6.1.4.1.2636.3.66.5.1.4.1.3

Gauge32

Total number of free addresses in this range.

jnxMbgIPPoolRangeInUse

1.3.6.1.4.1.2636.3.66.5.1.4.1.4

Gauge32

Total number of used addresses in this range.

jnxMbgIPPoolRangeUtil

1.3.6.1.4.1.2636.3.66.5.1.4.1.5

Gauge32 · percent

Percentage utilization for this range.

Trap details

jnxMbgSMIPPoolThresholdExceeded

1.3.6.1.4.1.2636.3.66.5.0.1

This notification signifies that the number of addresses allocated from a given address pool has exceeded a pre-configured threshold value.

jnxMbgSMIPPoolThresholdPoolName

1.3.6.1.4.1.2636.3.66.5.1.2.1

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

The name which identifies the address pool on the mobile-gateway for which the threshold was exceeded.

jnxMbgSMIPPoolThresholdLSName

1.3.6.1.4.1.2636.3.66.5.1.2.2

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

The name which identifies the logical-system on the mobile-gateway in which the address pool threshold was exceeded.

jnxMbgSMIPPoolThresholdRIName

1.3.6.1.4.1.2636.3.66.5.1.2.3

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

The name which identifies the routing instance on the mobile-gateway in which the address pool threshold was exceeded.

jnxMbgSMIPPoolConfiguredThreshold

1.3.6.1.4.1.2636.3.66.5.1.2.4

Unsigned32 · percent

The threshold value configured for an address pool on the mobile gateway exceeding which a notification is generated.

jnxMbgSMIPPoolCurrentThreshold

1.3.6.1.4.1.2636.3.66.5.1.2.5

Unsigned32 · percent

The current threshold value for an address pool on the mobile gateway. This can be equal to or greater than the configured threshold value.

jnxMbgSMIPPoolMMStateChange

1.3.6.1.4.1.2636.3.66.5.0.2

This notification indicates that the pool name indicated by LS-name, RI-name and pool-name undergoes a change in the maintenance-mode state.

jnxMbgSMIPPoolMMPoolName

1.3.6.1.4.1.2636.3.66.5.1.2.6

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

The name which identifies the address pool on the mobile-gateway which underwent a change in the maintenance-mode state.

jnxMbgSMIPPoolMMLSName

1.3.6.1.4.1.2636.3.66.5.1.2.7

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

The name which identifies the logical-system on the mobile-gateway which underwent a change in the maintenance-mode state.

jnxMbgSMIPPoolMMRIName

1.3.6.1.4.1.2636.3.66.5.1.2.8

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

The name which identifies the routing instance on the mobile-gateway which underwent a change in the maintenance-mode state.

jnxMbgSMIPPoolPrevMMState

1.3.6.1.4.1.2636.3.66.5.1.2.9

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

A string that indicates the maintenance-mode state .

jnxMbgSMIPPoolNewMMState

1.3.6.1.4.1.2636.3.66.5.1.2.10

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

A string that indicates the maintenance-mode state .

jnxMbgSMIPRangeHighThresExcd

1.3.6.1.4.1.2636.3.66.5.0.3

This notification indicates that the range name that exceeded higher threshold.

jnxMbgSMIPRangeHiThresRangeName

1.3.6.1.4.1.2636.3.66.5.1.2.11

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

The name which identifies the address pool's range on the mobile-gateway for which the threshold was exceeded.

jnxMbgSMIPRangeHiThresPoolName

1.3.6.1.4.1.2636.3.66.5.1.2.12

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

The name which identifies the address pool on the mobile-gateway, whose range threshold was exceeded.

jnxMbgSMIPRangeHiLSName

1.3.6.1.4.1.2636.3.66.5.1.2.13

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

The name which identifies the logical-system on the mobile-gateway in which the address range threshold was exceeded.

jnxMbgSMIPRangeHiRIName

1.3.6.1.4.1.2636.3.66.5.1.2.14

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

The name which identifies the routing instance on the mobile-gateway in which the address range threshold was exceeded.

jnxMbgSMIPRangeHiCfgThres

1.3.6.1.4.1.2636.3.66.5.1.2.15

Unsigned32 · percent

The threshold value configured for an address pool range on the mobile gateway exceeding which a notification is generated.

jnxMbgSMIPRangeHiCurrUtil

1.3.6.1.4.1.2636.3.66.5.1.2.16

Unsigned32 · percent

The current threshold value for an address pool range on the mobile gateway. This can be equal to or greater than the configured threshold value.

jnxMbgSMIPRangeLowThresRchd

1.3.6.1.4.1.2636.3.66.5.0.4

This notification indicates that the range name that reached lower threshold.

jnxMbgSMIPRangeLowThresRangeName

1.3.6.1.4.1.2636.3.66.5.1.2.17

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

The name which identifies the address pool's range on the mobile-gateway for which the low threshold was reached.

jnxMbgSMIPRangeLowThresPoolName

1.3.6.1.4.1.2636.3.66.5.1.2.18

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

The name which identifies the address pool on the mobile-gateway, whose range low threshold was reached.

jnxMbgSMIPRangeLowLSName

1.3.6.1.4.1.2636.3.66.5.1.2.19

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

The name which identifies the logical-system on the mobile-gateway in which the address range low threshold was reached.

jnxMbgSMIPRangeLowRIName

1.3.6.1.4.1.2636.3.66.5.1.2.20

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

The name which identifies the routing instance on the mobile-gateway in which the address range low threshold was reached.

jnxMbgSMIPRangeLowCfgThres

1.3.6.1.4.1.2636.3.66.5.1.2.21

Unsigned32 · percent

The threshold value configured for an address pool range on the mobile gateway reaching which a notification is generated.

jnxMbgSMIPRangeLowCurrUtil

1.3.6.1.4.1.2636.3.66.5.1.2.22

Unsigned32 · percent

The current threshold value for an address pool range on the mobile gateway. This can be equal to or greater than the configured threshold value.

jnxMbgSMIPPoolHighThresExcd

1.3.6.1.4.1.2636.3.66.5.0.5

This notification signifies that the number of addresses allocated from a given address pool has exceeded a pre-configured threshold value.

jnxMbgSMIPPoolThresholdPoolName

1.3.6.1.4.1.2636.3.66.5.1.2.1

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

The name which identifies the address pool on the mobile-gateway for which the threshold was exceeded.

jnxMbgSMIPPoolThresholdLSName

1.3.6.1.4.1.2636.3.66.5.1.2.2

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

The name which identifies the logical-system on the mobile-gateway in which the address pool threshold was exceeded.

jnxMbgSMIPPoolThresholdRIName

1.3.6.1.4.1.2636.3.66.5.1.2.3

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

The name which identifies the routing instance on the mobile-gateway in which the address pool threshold was exceeded.

jnxMbgSMIPPoolHTCfgThres

1.3.6.1.4.1.2636.3.66.5.1.2.23

Unsigned32 · percent

The threshold value configured for an address pool on the mobile gateway exceeding which a notification is generated.

jnxMbgSMIPPoolCurrUtil

1.3.6.1.4.1.2636.3.66.5.1.2.24

Unsigned32 · percent

The current utilization value for an address pool on the mobile gateway. This can be equal to or greater than the configured threshold value.

jnxMbgSMIPPoolLowThresRchd

1.3.6.1.4.1.2636.3.66.5.0.6

This notification signifies that the number of addresses allocated from a given address pool has reached the lower threshold value.

jnxMbgSMIPPoolThresholdPoolName

1.3.6.1.4.1.2636.3.66.5.1.2.1

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

The name which identifies the address pool on the mobile-gateway for which the threshold was exceeded.

jnxMbgSMIPPoolThresholdLSName

1.3.6.1.4.1.2636.3.66.5.1.2.2

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

The name which identifies the logical-system on the mobile-gateway in which the address pool threshold was exceeded.

jnxMbgSMIPPoolThresholdRIName

1.3.6.1.4.1.2636.3.66.5.1.2.3

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

The name which identifies the routing instance on the mobile-gateway in which the address pool threshold was exceeded.

jnxMbgSMIPPoolLTCfgThres

1.3.6.1.4.1.2636.3.66.5.1.2.25

Unsigned32 · percent

The threshold value configured for an address pool on the mobile gateway reaching which a notification is generated.

jnxMbgSMIPPoolCurrUtil

1.3.6.1.4.1.2636.3.66.5.1.2.24

Unsigned32 · percent

The current utilization value for an address pool on the mobile gateway. This can be equal to or greater than the configured threshold value.

jnxMbgIPPoolExhausted

1.3.6.1.4.1.2636.3.66.5.0.7

This notification signifies that the given pool has exhausted all its addresses and there are no free addresses left.

jnxMbgIPPoolLogicalSystem

1.3.6.1.4.1.2636.3.66.5.1.3.1.2

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

A name which identifies the logical-system to which the address pool belongs on the mobile gateway.

jnxMbgIPPoolRoutingInstance

1.3.6.1.4.1.2636.3.66.5.1.3.1.3

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

A name which identifies the routing instance to which the address pool belongs on the mobile gateway.

jnxMbgIPPoolName

1.3.6.1.4.1.2636.3.66.5.1.3.1.4

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

A name which identifies the pool on the mobile-gateway.

↑ To TOC