EZ5 MIB Catalog

JUNIPER-MOBILE-GW-SGW-MFWD-MIB

2011-08-04

This module defines objects pertaining to SGW MFWD (Serving Gateway Mobile Packet Forwarding Daemon)

Download JUNIPER-MOBILE-GW-SGW-MFWD-MIB.txt Open JUNIPER-MOBILE-GW-SGW-MFWD-MIB.txt in a new tab

SCALARS (2) · TRAPS (2)

Scalars (2)

NameOID
jnxMbgSgwMfwdServicePicName1.3.6.1.4.1.2636.3.66.2.7.1.1
jnxMbgSgwMfwdBufMemLimit1.3.6.1.4.1.2636.3.66.2.7.1.2

Traps (2)

NameOID
jnxMbgSgwMfwdBufMemThresRaise1.3.6.1.4.1.2636.3.66.2.7.0.1
jnxMbgSgwMfwdBufMemThresClear1.3.6.1.4.1.2636.3.66.2.7.0.2

END OF TOC

Scalar details

jnxMbgSgwMfwdServicePicName

1.3.6.1.4.1.2636.3.66.2.7.1.1

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (8..15) · OCTET STRING · hint 255a

This identifies the session-pic, in the form ms-a/b/0, where <a> is the slot and <b> could be either 0 or 1.

jnxMbgSgwMfwdBufMemLimit

1.3.6.1.4.1.2636.3.66.2.7.1.2

Gauge32 · percent

This indicates the percentage of total buffer memory being used

Trap details

jnxMbgSgwMfwdBufMemThresRaise

1.3.6.1.4.1.2636.3.66.2.7.0.1

This notification signifies that the high memory buffering threshold for MFWD has reached at the SPIC level. The gateway name, SPIC name and memory buffer threshold will be displayed.

jnxMbgGwName

1.3.6.1.4.1.2636.3.66.4.1.1.2

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

Gateway Name.

jnxMbgSgwMfwdServicePicName

1.3.6.1.4.1.2636.3.66.2.7.1.1

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (8..15) · OCTET STRING · hint 255a

This identifies the session-pic, in the form ms-a/b/0, where <a> is the slot and <b> could be either 0 or 1.

jnxMbgSgwMfwdBufMemLimit

1.3.6.1.4.1.2636.3.66.2.7.1.2

Gauge32 · percent

This indicates the percentage of total buffer memory being used

jnxMbgSgwMfwdBufMemThresClear

1.3.6.1.4.1.2636.3.66.2.7.0.2

This notification signifies that the low memory buffering threshold for MFWD has reached at the SPIC level. The gateway name, SPIC name and memory buffer threshold will be displayed.

jnxMbgGwName

1.3.6.1.4.1.2636.3.66.4.1.1.2

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

Gateway Name.

jnxMbgSgwMfwdServicePicName

1.3.6.1.4.1.2636.3.66.2.7.1.1

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (8..15) · OCTET STRING · hint 255a

This identifies the session-pic, in the form ms-a/b/0, where <a> is the slot and <b> could be either 0 or 1.

jnxMbgSgwMfwdBufMemLimit

1.3.6.1.4.1.2636.3.66.2.7.1.2

Gauge32 · percent

This indicates the percentage of total buffer memory being used

↑ To TOC