EZ5 MIB Catalog

JUNIPER-NAT-MIB

2020-08-27

This module defines the object that are used to monitor network address translation attributes.

Download JUNIPER-NAT-MIB.txt Open JUNIPER-NAT-MIB.txt in a new tab

SCALARS (2) · TABLES (4) · TRAPS (1)

Scalars (2)

NameOID
jnxNatAddrPoolUtil1.3.6.1.4.1.2636.3.59.1.2.1
jnxNatTrapSrcPoolName1.3.6.1.4.1.2636.3.59.1.2.2

Tables (4)

NameOID
jnxSrcNatStatsTable1.3.6.1.4.1.2636.3.59.1.1.1
jnxNatRuleTable1.3.6.1.4.1.2636.3.59.1.1.2
jnxNatPoolTable1.3.6.1.4.1.2636.3.59.1.1.3
jnxNatPbaStatsTable1.3.6.1.4.1.2636.3.59.1.1.4

Traps (1)

NameOID
jnxNatAddrPoolThresholdStatus1.3.6.1.4.1.2636.3.59.1.0.1

END OF TOC

Scalar details

jnxNatAddrPoolUtil

1.3.6.1.4.1.2636.3.59.1.2.1

Integer32 (0..100)

The dynamic address pool utilization in percentage.

jnxNatTrapSrcPoolName

1.3.6.1.4.1.2636.3.59.1.2.2

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (1..64) · OCTET STRING · hint 255a

Source NAT Pool name who issues trap

Table details

jnxSrcNatStatsTable

1.3.6.1.4.1.2636.3.59.1.1.1

Index: jnxNatSrcPoolName

This table exposes the source NAT translation attributes of the translated addresses. When performing source IP address translation, the services pic translates the original source IP address and/or port number to different one. The resource, address source pools provide the service pic with a supply of addresses from which to draw when performing source network address translation. This table contains information on source IP address translation only.

jnxNatSrcPoolName

1.3.6.1.4.1.2636.3.59.1.1.1.1.1

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..64) · OCTET STRING · hint 255a

The name of dynamic source IP address pool. This is the address pool where the translated address is allocated from.

jnxNatSrcXlatedAddrType

1.3.6.1.4.1.2636.3.59.1.1.1.1.2

INTEGER1 = ipv42 = ipv6 · Integer32

The type of dynamic source IP address allocated from the address pool used in the NAT translation. For NAT MIB, supporting ipv4(1) and ipv6(2) only.

jnxNatSrcPoolType

1.3.6.1.4.1.2636.3.59.1.1.1.1.3

INTEGER1 = static2 = dynamic-napt3 = dynamic-nat11 = basic-nat4412 = dynamic-nat4413 = napt-4414 = dnat-4415 = stateful-nat6416 = stateless-nat6417 = basic-nat-pt18 = napt-pt19 = basic-nat6620 = stateless-nat6621 = napt-6622 = twice-napt-4423 = twice-basic-nat-4424 = twice-dynamic-nat-4425 = det-napt4426 = sd-napt44 · Integer32

Source NAT can do address translation with or without port translation. The source port pool type indicates whether the address translation is done with port or without the port, or if it is a static translation.

jnxNatSrcNumPortAvail

1.3.6.1.4.1.2636.3.59.1.1.1.1.4

Unsigned32

The maxmimum number of ports available with this pool. This attribute is only applicable to NAT translations with PAT.

jnxNatSrcNumPortInuse

1.3.6.1.4.1.2636.3.59.1.1.1.1.5

Unsigned32

The number of ports in use for this NAT address entry. This attribute is only applicable to translation with port translation.

jnxNatSrcNumAddressAvail

1.3.6.1.4.1.2636.3.59.1.1.1.1.6

Unsigned32

The maximum number of addresses available in this pool.

jnxNatSrcNumAddressInUse

1.3.6.1.4.1.2636.3.59.1.1.1.1.7

Unsigned32

The number of addresses in use from this pool. This attribute is only applicable to NAT translations without PAT.

jnxNatSrcNumSessions

1.3.6.1.4.1.2636.3.59.1.1.1.1.8

Unsigned32

The number of sessions are in use based on this NAT address entry.

jnxNatSrcNumAddressMapped

1.3.6.1.4.1.2636.3.59.1.1.1.1.9

Unsigned32

The number of public addresses mapped This attribute is only applicable for NAT translations with PAT.

jnxNatRuleTable

1.3.6.1.4.1.2636.3.59.1.1.2

Index: jnxNatRuleName

This table monitors NAT rule hits

jnxNatRuleName

1.3.6.1.4.1.2636.3.59.1.1.2.1.1

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..128) · OCTET STRING · hint 255a

NAT rule name

jnxNatRuleType

1.3.6.1.4.1.2636.3.59.1.1.2.1.2

INTEGER1 = static-source2 = static-destination3 = dynamic-source4 = napt11 = basic-nat4412 = dynamic-nat4413 = napt-4414 = dnat-4415 = stateful-nat6416 = stateless-nat6417 = basic-nat-pt18 = napt-pt19 = basic-nat6620 = stateless-nat6621 = napt-6622 = twice-napt-4423 = twice-basic-nat-4424 = twice-dynamic-nat-4425 = det-napt4426 = sd-napt44 · Integer32

NAT types: Static Source, Static Destination, Dynamic Source and NAPT

jnxNatRuleTransHits

1.3.6.1.4.1.2636.3.59.1.1.2.1.3

Unsigned32

The number of hits on this NAT rule

jnxNatPoolTable

1.3.6.1.4.1.2636.3.59.1.1.3

Index: jnxNatPoolName

This table monitors NAT pool hits

jnxNatPoolName

1.3.6.1.4.1.2636.3.59.1.1.3.1.1

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..64) · OCTET STRING · hint 255a

NAT Pool name

jnxNatPoolType

1.3.6.1.4.1.2636.3.59.1.1.3.1.2

INTEGER1 = static-source2 = static-destination3 = dynamic-source4 = napt11 = basic-nat4412 = dynamic-nat4413 = napt-4414 = dnat-4415 = stateful-nat6416 = stateless-nat6417 = basic-nat-pt18 = napt-pt19 = basic-nat6620 = stateless-nat6621 = napt-6622 = twice-napt-4423 = twice-basic-nat-4424 = twice-dynamic-nat-4425 = det-napt4426 = sd-napt44 · Integer32

NAT types: Static Source, Static Destination, Dynamic Source and NAPT

jnxNatPoolTransHits

1.3.6.1.4.1.2636.3.59.1.1.3.1.3

Unsigned32

The number of hits on this NAT Pool

jnxNatPbaStatsTable

1.3.6.1.4.1.2636.3.59.1.1.4

Index: jnxNatPbaPoolName

This table monitors NAT PBA stats

jnxNatPbaPoolName

1.3.6.1.4.1.2636.3.59.1.1.4.1.1

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..64) · OCTET STRING · hint 255a

NAT PBA Pool name

jnxNatPbaOutOfPortError

1.3.6.1.4.1.2636.3.59.1.1.4.1.2

Unsigned32

The Number of times the out of port error is hit

jnxNatPbaMaxNumberOfPortBlocksUsed

1.3.6.1.4.1.2636.3.59.1.1.4.1.3

Unsigned32

The count of Max number of blocks used for the pool

jnxNatPbaCurrentNumberOfPortBlocksInUse

1.3.6.1.4.1.2636.3.59.1.1.4.1.4

Unsigned32

The count of current number of blocks used for the pool

jnxNatPbaPortBlockAllocErrors

1.3.6.1.4.1.2636.3.59.1.1.4.1.5

Unsigned32

The count of port block allocation errors

jnxNatPbaPortBlockMemAllocErrors

1.3.6.1.4.1.2636.3.59.1.1.4.1.6

Unsigned32

The count of port block memory allocation errors

jnxNatPbaPortBlockLimitExeededErrors

1.3.6.1.4.1.2636.3.59.1.1.4.1.7

Unsigned32

The count of port block limit exceeded errors hit

Trap details

jnxNatAddrPoolThresholdStatus

1.3.6.1.4.1.2636.3.59.1.0.1

The Source NAT address pool utilization threshold status trap signifies that the address pool utilization is either exceeds certain percentage, or clear of that percentage. jnxNatTrapPoolName is the name of the resource pool jnxNatAddrPoolUtil is the percentage of utilization of the address pool.

jnxNatTrapSrcPoolName

1.3.6.1.4.1.2636.3.59.1.2.2

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (1..64) · OCTET STRING · hint 255a

Source NAT Pool name who issues trap

jnxNatAddrPoolUtil

1.3.6.1.4.1.2636.3.59.1.2.1

Integer32 (0..100)

The dynamic address pool utilization in percentage.

↑ To TOC