InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
jnxPMonCurrentActiveFlows
1.3.6.1.4.1.2636.3.19.1.1.1
Gauge32
The number of flows currently active.
jnxPMonTotalFlows
1.3.6.1.4.1.2636.3.19.1.1.2
Counter32
The cumulative number of total flows.
jnxPMonTotalFlowsPackets
1.3.6.1.4.1.2636.3.19.1.1.3
Counter64 (0..18446744073709551615)
The number of total flows packets.
jnxPMonTenSecondAverageFlowPackets
1.3.6.1.4.1.2636.3.19.1.1.4
Gauge32
The number of flow packets per second in 10 second average.
jnxPMonTotalFlowsBytes
1.3.6.1.4.1.2636.3.19.1.1.5
Counter64 (0..18446744073709551615)
The number of total flows bytes.
jnxPMonTenSecondAverageFlowBytes
1.3.6.1.4.1.2636.3.19.1.1.6
Gauge32
The number of flow bytes per second in 10 second average.
jnxPMonTotalFlowsExpired
1.3.6.1.4.1.2636.3.19.1.1.7
Counter32
The cumulative number of total flows expired.
jnxPMonTotalFlowsAged
1.3.6.1.4.1.2636.3.19.1.1.8
Counter32
The cumulative number of total flows aged.
jnxPMonTotalFlowsExported
1.3.6.1.4.1.2636.3.19.1.1.9
Counter32
The cumulative number of total flows exported.
jnxPMonTotalFlowsPacketsExported
1.3.6.1.4.1.2636.3.19.1.1.10
Counter32
The cumulative number of total flows packets exported.
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
jnxPMonFlowAllocFailures
1.3.6.1.4.1.2636.3.19.2.1.1
Counter32
The number of flow allocation failures.
jnxPMonFlowFreeFailures
1.3.6.1.4.1.2636.3.19.2.1.2
Counter32
The number of flow free failures.
jnxPMonFreeListFailures
1.3.6.1.4.1.2636.3.19.2.1.3
Counter32
The number of free list failures.
jnxPMonNoMemDrops
1.3.6.1.4.1.2636.3.19.2.1.4
Counter64 (0..18446744073709551615)
The number of packet drops due to low/no memory.
jnxPMonNotIPDrops
1.3.6.1.4.1.2636.3.19.2.1.5
Counter64 (0..18446744073709551615)
The number of packet drops due to not IP.
jnxPMonNotIPv4Drops
1.3.6.1.4.1.2636.3.19.2.1.6
Counter64 (0..18446744073709551615)
The number of packet drops due to not IPv4.
jnxPMonTooSmallDrops
1.3.6.1.4.1.2636.3.19.2.1.7
Counter64 (0..18446744073709551615)
The number of packet drops due to too small on header.
jnxPMonCurrentOverload
1.3.6.1.4.1.2636.3.19.2.1.8
JnxPMonOverloadIdIdentifies specific overload conditions that may exist on an interface. · BITS
Identifies current overload conditions that exist on this interface.
jnxPMonLastOverload
1.3.6.1.4.1.2636.3.19.2.1.9
JnxPMonOverloadIdIdentifies specific overload conditions that may exist on an interface. · BITS
Identifies the last overload condition to change on this interface.
jnxPMonLastOverloadTime
1.3.6.1.4.1.2636.3.19.2.1.10
TimeTicks
The value of sysUpTime when the management subsystem last learned of a change to the overload condition on this interface.
jnxPMonLastOverloadDate
1.3.6.1.4.1.2636.3.19.2.1.11
DateAndTimeA date-time specification.
field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month 1..12
3 4 day 1..31
4 5 hour 0..23
5 6 minutes 0..59
6 7 seconds 0..60
(use 60 for leap-second)
7 8 deci-seconds 0..9
8 9 direction from UTC '+' / '-'
9 10 hours from UTC* 0..13
10 11 minutes from UTC 0..59
* Notes: - the value of year is in network-byte order - daylight saving time in New Zealand is +13
For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as:
1992-5-26,13:30:15.0,-4:0
Note that if only local time is known, then timezone information (fields 8-10) is not present. SIZE (8 | 11) · OCTET STRING · hint 2d-1d-1d,1d:1d:1d.1d,1a1d:1d
The system date and time when the management subsystem last learned of a change to the overload condition on this interface.
jnxPMonLastOverloadEvent
1.3.6.1.4.1.2636.3.19.2.1.12
INTEGER1 = none2 = set3 = cleared · Integer32
This indicates whether the last overload event set a new overload condition or cleared an existing condition.
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
jnxPMonFlowTotalAlloc
1.3.6.1.4.1.2636.3.19.3.1.1
Counter64 (0..18446744073709551615)
The number of flow records allocated.
jnxPMonFlowTotalFree
1.3.6.1.4.1.2636.3.19.3.1.2
Counter64 (0..18446744073709551615)
The number of flow records freed.
jnxPMonFlowMaxAlloc
1.3.6.1.4.1.2636.3.19.3.1.3
Counter64 (0..18446744073709551615)
The number of maximum flow records allocated.
jnxPMonAllocPerSecond
1.3.6.1.4.1.2636.3.19.3.1.4
Gauge32
The number of flow records allocated per second.
jnxPMonFreePerSecond
1.3.6.1.4.1.2636.3.19.3.1.5
Gauge32
The number of flow records freed per second.
jnxPMonTotalMemoryUsed
1.3.6.1.4.1.2636.3.19.3.1.6
Gauge32
The total amount of memory currently used in KBbytes.
jnxPMonTotalMemoryFree
1.3.6.1.4.1.2636.3.19.3.1.7
Gauge32
The total amount of memory currently freed in KBbytes.
Trap details
jnxPMonOverloadSet
1.3.6.1.4.1.2636.4.7.0.1
Notification of a new overload condition on a Passive Monitoring interface.
ifDescr
1.3.6.1.2.1.2.2.1.2
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the interface hardware/software.
jnxPMonLastOverload
1.3.6.1.4.1.2636.3.19.2.1.9
JnxPMonOverloadIdIdentifies specific overload conditions that may exist on an interface. · BITS
Identifies the last overload condition to change on this interface.
jnxPMonCurrentOverload
1.3.6.1.4.1.2636.3.19.2.1.8
JnxPMonOverloadIdIdentifies specific overload conditions that may exist on an interface. · BITS
Identifies current overload conditions that exist on this interface.
jnxPMonLastOverloadDate
1.3.6.1.4.1.2636.3.19.2.1.11
DateAndTimeA date-time specification.
field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month 1..12
3 4 day 1..31
4 5 hour 0..23
5 6 minutes 0..59
6 7 seconds 0..60
(use 60 for leap-second)
7 8 deci-seconds 0..9
8 9 direction from UTC '+' / '-'
9 10 hours from UTC* 0..13
10 11 minutes from UTC 0..59
* Notes: - the value of year is in network-byte order - daylight saving time in New Zealand is +13
For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as:
1992-5-26,13:30:15.0,-4:0
Note that if only local time is known, then timezone information (fields 8-10) is not present. SIZE (8 | 11) · OCTET STRING · hint 2d-1d-1d,1d:1d:1d.1d,1a1d:1d
The system date and time when the management subsystem last learned of a change to the overload condition on this interface.
jnxPMonOverloadCleared
1.3.6.1.4.1.2636.4.7.0.2
Notification of a cleared overload condition on a Passive Monitoring interface.
ifDescr
1.3.6.1.2.1.2.2.1.2
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the interface hardware/software.
jnxPMonLastOverload
1.3.6.1.4.1.2636.3.19.2.1.9
JnxPMonOverloadIdIdentifies specific overload conditions that may exist on an interface. · BITS
Identifies the last overload condition to change on this interface.
jnxPMonCurrentOverload
1.3.6.1.4.1.2636.3.19.2.1.8
JnxPMonOverloadIdIdentifies specific overload conditions that may exist on an interface. · BITS
Identifies current overload conditions that exist on this interface.
jnxPMonLastOverloadDate
1.3.6.1.4.1.2636.3.19.2.1.11
DateAndTimeA date-time specification.
field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month 1..12
3 4 day 1..31
4 5 hour 0..23
5 6 minutes 0..59
6 7 seconds 0..60
(use 60 for leap-second)
7 8 deci-seconds 0..9
8 9 direction from UTC '+' / '-'
9 10 hours from UTC* 0..13
10 11 minutes from UTC 0..59
* Notes: - the value of year is in network-byte order - daylight saving time in New Zealand is +13
For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as:
1992-5-26,13:30:15.0,-4:0
Note that if only local time is known, then timezone information (fields 8-10) is not present. SIZE (8 | 11) · OCTET STRING · hint 2d-1d-1d,1d:1d:1d.1d,1a1d:1d
The system date and time when the management subsystem last learned of a change to the overload condition on this interface.