EZ5 MIB Catalog

JUNIPER-RPS-MIB

2007-08-29

This module contains definitions of management information for Redundant power supply.

Download JUNIPER-RPS-MIB.txt Open JUNIPER-RPS-MIB.txt in a new tab

TABLES (5)

Tables (5)

NameOID
jnxRPSVersionTable1.3.6.1.4.1.2636.3.40.1.6.1.1
jnxRPSStatusTable1.3.6.1.4.1.2636.3.40.1.6.1.2
jnxRPSPowerSupplyTable1.3.6.1.4.1.2636.3.40.1.6.1.3
jnxRPSLedPortStatusTable1.3.6.1.4.1.2636.3.40.1.6.1.4
jnxRPSPortStatusTable1.3.6.1.4.1.2636.3.40.1.6.1.5

END OF TOC

Table details

jnxRPSVersionTable

1.3.6.1.4.1.2636.3.40.1.6.1.1

Index: jnxRPSSerialNumber

A Table containing RPS Version details.

jnxRPSSerialNumber

1.3.6.1.4.1.2636.3.40.1.6.1.1.1.1

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (12) · OCTET STRING · hint 255a

The RPS Serial Number of the Chassis.

jnxRPSModel

1.3.6.1.4.1.2636.3.40.1.6.1.1.1.2

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

The RPS Model name of the Chassis.

jnxRPSFirmwareVersion

1.3.6.1.4.1.2636.3.40.1.6.1.1.1.3

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..12) · OCTET STRING · hint 255a

The RPS Firmware version of the Chassis.

jnxRPSUBootVersion

1.3.6.1.4.1.2636.3.40.1.6.1.1.1.4

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..12) · OCTET STRING · hint 255a

The RPS UBoot verison of the Chassis.

jnxRPSStatusTable

1.3.6.1.4.1.2636.3.40.1.6.1.2

Index: jnxRPSSerialNumber

A table containing RPS Fan and System Status for each slot.

jnxRPSFanStatus

1.3.6.1.4.1.2636.3.40.1.6.1.2.1.1

JnxRPSStatus0 = green1 = red2 = amber3 = green-blink4 = red-blink5 = amber-blink6 = offRPS Status. · Integer32

The RPS Fan Status on the chassis .

jnxRPSSystemStatus

1.3.6.1.4.1.2636.3.40.1.6.1.2.1.2

JnxRPSStatus0 = green1 = red2 = amber3 = green-blink4 = red-blink5 = amber-blink6 = offRPS Status. · Integer32

The RPS System Status on the Chassis.

jnxRPSPowerSupplyTable

1.3.6.1.4.1.2636.3.40.1.6.1.3

Index: jnxRPSSerialNumber · jnxRPSPowerSupplyIndex

A table containing RPS Power Supply details.

jnxRPSPowerSupplyIndex

1.3.6.1.4.1.2636.3.40.1.6.1.3.1.1

Integer32 (1..3)

The RPS Power Supply Index of the Chassis corresponding to RPS node.

jnxRPSPowerSupplySlotId

1.3.6.1.4.1.2636.3.40.1.6.1.3.1.2

Integer32 (1..3)

The RPS Power Supply Slot ID f the Chassis corresponding to RPS node.

jnxRPSPowerSupplyStatus

1.3.6.1.4.1.2636.3.40.1.6.1.3.1.3

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..32) · OCTET STRING · hint 255a

The RPS Power Supply Status of the Chassis corresponding to RPS node.

jnxRPSPowerSupplyDescription

1.3.6.1.4.1.2636.3.40.1.6.1.3.1.4

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..32) · OCTET STRING · hint 255a

The RPS Power Supply Description of the Chassis corresponding to RPS node.

jnxRPSLedPortStatusTable

1.3.6.1.4.1.2636.3.40.1.6.1.4

Index: jnxRPSSerialNumber · jnxRPSLedPortIndex

A table containing RPS LED Status details.

jnxRPSLedPortIndex

1.3.6.1.4.1.2636.3.40.1.6.1.4.1.1

Integer32 (1..6)

The RPS Led Port Index of the Chassis corresponding to RPS node.

jnxRPSLedPortStatus

1.3.6.1.4.1.2636.3.40.1.6.1.4.1.2

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..32) · OCTET STRING · hint 255a

The RPS Led Port Status of the Chassis corresponding to RPS node.

jnxRPSPortStatusTable

1.3.6.1.4.1.2636.3.40.1.6.1.5

Index: jnxRPSSerialNumber · jnxRPSPortIndex

A table containing RPS Port Status details.

jnxRPSPortIndex

1.3.6.1.4.1.2636.3.40.1.6.1.5.1.1

Integer32 (1..6)

The RPS Port Index of the Chassis corresponding to RPS node.

jnxRPSPortId

1.3.6.1.4.1.2636.3.40.1.6.1.5.1.2

Integer32

The RPS Port ID of the Chassis corresponding to RPS node.

jnxRPSPortStatus

1.3.6.1.4.1.2636.3.40.1.6.1.5.1.3

Integer32

The RPS Port Status of the Chassis corresponding to RPS node.

jnxRPSPortPriority

1.3.6.1.4.1.2636.3.40.1.6.1.5.1.4

Integer32

The RPS Port Priority of the Chassis corresponding to RPS node.

jnxRPSPortPowerRequested

1.3.6.1.4.1.2636.3.40.1.6.1.5.1.5

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..32) · OCTET STRING · hint 255a

The RPS Led Port Power Requested of the Chassis corresponding to RPS node.

↑ To TOC