JUNIPER-RTM-MIB

Name	OID
jnxFeaturesLiveAttendantExtension	1.3.6.1.4.1.2636.3.39.1.15.1.1.8.1
jnxFeaturesLiveAttendantStartTime	1.3.6.1.4.1.2636.3.39.1.15.1.1.8.2
jnxFeaturesLiveAttendantEndTime	1.3.6.1.4.1.2636.3.39.1.15.1.1.8.3
jnxFeaturesAttendantRingCount	1.3.6.1.4.1.2636.3.39.1.15.1.1.8.4
jnxFeaturesVoicemailExtension	1.3.6.1.4.1.2636.3.39.1.15.1.1.8.5
jnxFeaturesVoicemailRemoteAccessNumber	1.3.6.1.4.1.2636.3.39.1.15.1.1.8.6

Name	OID
jnxSipTemplateTable	1.3.6.1.4.1.2636.3.39.1.15.1.1.1
jnxAnalogTemplateTable	1.3.6.1.4.1.2636.3.39.1.15.1.1.2
jnxStationTable	1.3.6.1.4.1.2636.3.39.1.15.1.1.3
jnxSurvivableCallServiceTable	1.3.6.1.4.1.2636.3.39.1.15.1.1.4
jnxTrunkConfigTable	1.3.6.1.4.1.2636.3.39.1.15.1.1.5
jnxDigitManipulationTable	1.3.6.1.4.1.2636.3.39.1.15.1.1.6
jnxPeerCallServerTable	1.3.6.1.4.1.2636.3.39.1.15.1.1.7
jnxDialPlanTable	1.3.6.1.4.1.2636.3.39.1.15.1.1.9
jnxClassOfRestrictionTable	1.3.6.1.4.1.2636.3.39.1.15.1.1.11
jnxMediaGatewayTable	1.3.6.1.4.1.2636.3.39.1.15.1.1.12
jnxTrunkGroupTable	1.3.6.1.4.1.2636.3.39.1.15.1.1.13
jnxSurvivableStatsTable	1.3.6.1.4.1.2636.3.39.1.15.1.1.14

jnxSipTemplateTable

1.3.6.1.4.1.2636.3.39.1.15.1.1.1

Index: jnxSipTemplateName

This table contains the SIP station template objects.

jnxSipTemplateName

1.3.6.1.4.1.2636.3.39.1.15.1.1.1.1.1

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

SIP template name

jnxDtmfMethod

1.3.6.1.4.1.2636.3.39.1.15.1.1.1.1.2

INTEGER1 = rfc-28332 = sip-info3 = inband · Integer32

DTMF method

jnxCallerIdTransmit

1.3.6.1.4.1.2636.3.39.1.15.1.1.1.1.3

INTEGER1 = enable2 = disable · Integer32

Caller id transmit for outgoing calls

jnxInheritExtensionsFrom

1.3.6.1.4.1.2636.3.39.1.15.1.1.1.1.4

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

Inherit extensions in range starting from

jnxInheritExtensionsTo

1.3.6.1.4.1.2636.3.39.1.15.1.1.1.1.5

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

Inherit extensions in range up to

jnxClassOfRestriction

1.3.6.1.4.1.2636.3.39.1.15.1.1.1.1.6

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

Class of restriction policies

jnxCodecG711MU

1.3.6.1.4.1.2636.3.39.1.15.1.1.1.1.7

INTEGER1 = on2 = off · Integer32

G711-MU - 14 bit PCM 8 kHz sample, 64 kbit/s bitstream.

jnxCodecG711A

1.3.6.1.4.1.2636.3.39.1.15.1.1.1.1.8

INTEGER1 = on2 = off · Integer32

G711-A - 13 bit PCM 8 kHz sample, 64 kbit/s bitstream.

jnxCodecG729AB

1.3.6.1.4.1.2636.3.39.1.15.1.1.1.1.9

INTEGER1 = on2 = off · Integer32

G729AB - CS-ACELP, 8 kbit/s bitstream

jnxAnalogTemplateTable

1.3.6.1.4.1.2636.3.39.1.15.1.1.2

Index: jnxAnalogTemplateName

This table contains the analog template objects.

jnxAnalogTemplateName

1.3.6.1.4.1.2636.3.39.1.15.1.1.2.1.1

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

Analog template name

jnxAanalogCallerIdTransmit

1.3.6.1.4.1.2636.3.39.1.15.1.1.2.1.2

INTEGER1 = enable2 = disable · Integer32

Caller id transmit for outgoing calls

jnxAnalogVoiceActivityDetection

1.3.6.1.4.1.2636.3.39.1.15.1.1.2.1.3

INTEGER1 = enable2 = disable · Integer32

Voice activity detection

jnxAnalogComfortNoiseGeneration

1.3.6.1.4.1.2636.3.39.1.15.1.1.2.1.4

INTEGER1 = enable2 = disable · Integer32

Comfort noise generation during silence

jnxAnalogClassOfRestriction

1.3.6.1.4.1.2636.3.39.1.15.1.1.2.1.5

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

Class of restriction policies

jnxStationTable

1.3.6.1.4.1.2636.3.39.1.15.1.1.3

Index: jnxStationName

This table contains the station configuration objects.

jnxStationName

1.3.6.1.4.1.2636.3.39.1.15.1.1.3.1.1

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

The name of the station.

jnxStationExtension

1.3.6.1.4.1.2636.3.39.1.15.1.1.3.1.2

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

The station's extension

jnxStationRestriction

1.3.6.1.4.1.2636.3.39.1.15.1.1.3.1.3

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

Class of restriction

jnxStationCallerId

1.3.6.1.4.1.2636.3.39.1.15.1.1.3.1.5

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

The station's caller id

jnxStationDID

1.3.6.1.4.1.2636.3.39.1.15.1.1.3.1.6

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

Direct inward dialing number

jnxStationDILTdmInterface

1.3.6.1.4.1.2636.3.39.1.15.1.1.3.1.7

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

Direct inward line TDM interface.

jnxStationDILTimeSlotNumber

1.3.6.1.4.1.2636.3.39.1.15.1.1.3.1.8

Unsigned32

Direct inward line time slot number.

jnxStationAuthId

1.3.6.1.4.1.2636.3.39.1.15.1.1.3.1.9

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

Authenitcation identifier

jnxStationType

1.3.6.1.4.1.2636.3.39.1.15.1.1.3.1.10

INTEGER1 = sip2 = analog · Integer32

Station type

jnxStationTemplate

1.3.6.1.4.1.2636.3.39.1.15.1.1.3.1.11

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

The station's template name

jnxStationTdmInterface

1.3.6.1.4.1.2636.3.39.1.15.1.1.3.1.12

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

TDM interface. If the station type is sip this object is not applicable and contains a null string.

jnxStationTimeSlotNumber

1.3.6.1.4.1.2636.3.39.1.15.1.1.3.1.13

Unsigned32

Time Slot Number. If the station type is sip this object is not applicable.

jnxSurvivableCallServiceTable

1.3.6.1.4.1.2636.3.39.1.15.1.1.4

Index: jnxSurvivableCallServiceName

This table contains the survivable call service configuration objects.

jnxSurvivableCallServiceName

1.3.6.1.4.1.2636.3.39.1.15.1.1.4.1.1

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

The survivable call service name.

jnxSurvivableCallServicePeerCallServer

1.3.6.1.4.1.2636.3.39.1.15.1.1.4.1.2

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

Peer call server for survivable call service

jnxSurvivableCallServiceSipProtocolPort

1.3.6.1.4.1.2636.3.39.1.15.1.1.4.1.3

INTEGER (1..65535) · Integer32

Port number for signaling.

jnxSurvivableCallServiceSipProtocolTransport

1.3.6.1.4.1.2636.3.39.1.15.1.1.4.1.4

INTEGER1 = tcp2 = udp3 = tls · Integer32

Transport type for signaling.

jnxSurvivableCallServiceHeartbeatNormalInterval

1.3.6.1.4.1.2636.3.39.1.15.1.1.4.1.5

INTEGER (2..8) · Integer32

Heartbeat interval in seconds in normal state.

jnxSurvivableCallServiceRegistrationExpiryTimeout

1.3.6.1.4.1.2636.3.39.1.15.1.1.4.1.6

INTEGER (1..2147483647) · Integer32

Registration expiry timeout in seconds for stations registered.

jnxSurvivableCallServiceSipTimeout

1.3.6.1.4.1.2636.3.39.1.15.1.1.4.1.7

INTEGER (16..120) · Integer32

Timeout in seconds to declare peer call server is not reachable.

jnxSurvivableCallServiceMonitorTimeout

1.3.6.1.4.1.2636.3.39.1.15.1.1.4.1.8

INTEGER (5..20) · Integer32

Timeout to monitor in seconds if peer call server is reachable.

jnxSurvivableCallServiceHeartbeatSurvivableInterval

1.3.6.1.4.1.2636.3.39.1.15.1.1.4.1.9

INTEGER (100..1000) · Integer32

Heartbeat interval in miliseconds in survivable state.

jnxSurvivableCallServiceResponseThresholdMinimum

1.3.6.1.4.1.2636.3.39.1.15.1.1.4.1.10

INTEGER (0..100) · Integer32

Minimum response threshold value in percent.

jnxSurvivableCallServiceServicePointZone

1.3.6.1.4.1.2636.3.39.1.15.1.1.4.1.11

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

Zone for using survivable call service

jnxSurvivableCallServiceDialPlan

1.3.6.1.4.1.2636.3.39.1.15.1.1.4.1.12

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

Dial plan for survivable call service

jnxTrunkConfigTable

1.3.6.1.4.1.2636.3.39.1.15.1.1.5

Index: jnxTrunkConfigName

This table contains the trunk configuration objects.

jnxTrunkConfigName

1.3.6.1.4.1.2636.3.39.1.15.1.1.5.1.1

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

The trunk configuration name.

jnxTrunkConfigType

1.3.6.1.4.1.2636.3.39.1.15.1.1.5.1.2

INTEGER1 = fxs2 = fxo3 = t14 = e1 · Integer32

The trunk type.

jnxTrunkConfigTdmInterface

1.3.6.1.4.1.2636.3.39.1.15.1.1.5.1.3

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

The TDM interface.

jnxTrunkConfigT1CasGroupTimeSlots

1.3.6.1.4.1.2636.3.39.1.15.1.1.5.1.4

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

Channel associated signaling time slot configuration.

jnxTrunkConfigT1CasGroupSignaling

1.3.6.1.4.1.2636.3.39.1.15.1.1.5.1.5

INTEGER1 = fxo-loop-start2 = fxo-ground-start3 = fxs-loop-start4 = fxs-ground-start5 = em-wink-start · Integer32

Channel associated signaling type.

jnxDigitManipulationTable

1.3.6.1.4.1.2636.3.39.1.15.1.1.6

Index: jnxDigitTransformName

This table contains the digit manipulation objects.

jnxDigitTransformName

1.3.6.1.4.1.2636.3.39.1.15.1.1.6.1.1

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

The name of the transform rule.

jnxDigitTransformRegularExpression

1.3.6.1.4.1.2636.3.39.1.15.1.1.6.1.2

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

The digit transform regular expression.

jnxPeerCallServerTable

1.3.6.1.4.1.2636.3.39.1.15.1.1.7

Index: jnxPeerCallServerName

This table contains the peer call server configuration objects.

jnxPeerCallServerName

1.3.6.1.4.1.2636.3.39.1.15.1.1.7.1.1

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

Peer call server name

jnxPeerCallServerDescription

1.3.6.1.4.1.2636.3.39.1.15.1.1.7.1.2

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

Description.

jnxPeerCallServerAddress

1.3.6.1.4.1.2636.3.39.1.15.1.1.7.1.3

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

ipv4 or ipv6 address

jnxPeerCallServerSipProtocolPort

1.3.6.1.4.1.2636.3.39.1.15.1.1.7.1.4

INTEGER (1..65535) · Integer32

Port number for signaling

jnxPeerCallServerSipProtocolTransport

1.3.6.1.4.1.2636.3.39.1.15.1.1.7.1.5

INTEGER1 = tcp2 = udp3 = tls · Integer32

Transport type for signaling.

jnxPeerCallServerCodecG711MU

1.3.6.1.4.1.2636.3.39.1.15.1.1.7.1.6

INTEGER1 = on2 = off · Integer32

G711-MU - 14 bit PCM 8 kHz sample, 64 kbit/s bitstream.

jnxPeerCallServerCodecG711A

1.3.6.1.4.1.2636.3.39.1.15.1.1.7.1.7

INTEGER1 = on2 = off · Integer32

G711-A - 13 bit PCM 8 kHz sample, 64 kbit/s bitstream.

jnxPeerCallServerCodecG729AB

1.3.6.1.4.1.2636.3.39.1.15.1.1.7.1.8

INTEGER1 = on2 = off · Integer32

G729AB - CS-ACELP, 8 kbit/s bitstream

jnxPeerCallServerDtmfMethod

1.3.6.1.4.1.2636.3.39.1.15.1.1.7.1.9

INTEGER1 = rfc-28332 = sip-info3 = inband · Integer32

DTMF method.

jnxPeerCallServerPstnAccessNumber

1.3.6.1.4.1.2636.3.39.1.15.1.1.7.1.10

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

PSTN access number for survivable call service

jnxPeerCallServerAuthId

1.3.6.1.4.1.2636.3.39.1.15.1.1.7.1.11

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

Authentication identifier

jnxDialPlanTable

1.3.6.1.4.1.2636.3.39.1.15.1.1.9

Index: jnxDialPlanName · jnxDialPlanDigitPattern

This table contains the dial plan for survivable call service configuration objects.

jnxDialPlanName

1.3.6.1.4.1.2636.3.39.1.15.1.1.9.1.1

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

The name of the dial plan

jnxDialPlanDigitPattern

1.3.6.1.4.1.2636.3.39.1.15.1.1.9.1.2

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

Digit pattern.

jnxDialPlanCallType

1.3.6.1.4.1.2636.3.39.1.15.1.1.9.1.3

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

Call type.

jnxDialPlanTrunkGroupList

1.3.6.1.4.1.2636.3.39.1.15.1.1.9.1.4

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

A list of associated trunk groups.

jnxClassOfRestrictionTable

1.3.6.1.4.1.2636.3.39.1.15.1.1.11

Index: jnxClassOfRestrictionName · jnxRestrictionPolicyName

This table contains the class of restriction configuration objects.

jnxClassOfRestrictionName

1.3.6.1.4.1.2636.3.39.1.15.1.1.11.1.1

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

Class of restriction name.

jnxRestrictionPolicyName

1.3.6.1.4.1.2636.3.39.1.15.1.1.11.1.2

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

Class of restriction policy name.

jnxRestrictionCallType

1.3.6.1.4.1.2636.3.39.1.15.1.1.11.1.3

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

Call type.

jnxRestrictionCallPermission

1.3.6.1.4.1.2636.3.39.1.15.1.1.11.1.4

INTEGER1 = allow2 = deny · Integer32

Call permission.

jnxMediaGatewayTable

1.3.6.1.4.1.2636.3.39.1.15.1.1.12

Index: jnxMediaGatewayName

This table contains the media gateway configuration objects.

jnxMediaGatewayName

1.3.6.1.4.1.2636.3.39.1.15.1.1.12.1.1

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

Media gateway name.

jnxMediaGatewayPeerCallServer

1.3.6.1.4.1.2636.3.39.1.15.1.1.12.1.2

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

Peer call server.

jnxMediaGatewaySipProtocolPort

1.3.6.1.4.1.2636.3.39.1.15.1.1.12.1.3

INTEGER (1..65535) · Integer32

Port number for signaling.

jnxMediaGatewaySipProtocolTransport

1.3.6.1.4.1.2636.3.39.1.15.1.1.12.1.4

INTEGER1 = tcp2 = udp3 = tls · Integer32

Transport type for signaling.

jnxMediaGatewayDialPlan

1.3.6.1.4.1.2636.3.39.1.15.1.1.12.1.5

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

Dial plan for survivable call service.

jnxTrunkGroupTable

1.3.6.1.4.1.2636.3.39.1.15.1.1.13

Index: jnxTrunkGroupName

This table contains the trunk group configuration objects.

jnxTrunkGroupName

1.3.6.1.4.1.2636.3.39.1.15.1.1.13.1.1

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

Name of this trunk group.

jnxTrunkGroupDescription

1.3.6.1.4.1.2636.3.39.1.15.1.1.13.1.2

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

Description of this trunk group.

jnxTrunkGroupTrunkList

1.3.6.1.4.1.2636.3.39.1.15.1.1.13.1.3

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

A list of trunks associated with this group.

jnxSurvivableStatsTable

1.3.6.1.4.1.2636.3.39.1.15.1.1.14

Index: jnxSurvivableStatsAddress · jnxSurvivableStatsPort · jnxSurvivableStatsTransport

This table contains the survivable call service statistics objects.

jnxSurvivableStatsAddress

1.3.6.1.4.1.2636.3.39.1.15.1.1.14.1.1

IpAddress SIZE (4)

The Ip Address of the remote SIP service.

jnxSurvivableStatsPort

1.3.6.1.4.1.2636.3.39.1.15.1.1.14.1.2

Unsigned32

The port number.

jnxSurvivableStatsTransport

1.3.6.1.4.1.2636.3.39.1.15.1.1.14.1.3

INTEGER1 = tcp2 = udp · Integer32

Transport type.

jnxSurvivableStatsSCSName

1.3.6.1.4.1.2636.3.39.1.15.1.1.14.1.4

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

Name of the Survivable Call Service.

jnxSurvivableStatsPeerCallServer

1.3.6.1.4.1.2636.3.39.1.15.1.1.14.1.5

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

Peer Call Server.

jnxSurvivableStatsCurrentState

1.3.6.1.4.1.2636.3.39.1.15.1.1.14.1.6

INTEGER1 = normal2 = survivable3 = monitor · Integer32

Current state.

jnxSurvivableStatsPriority

1.3.6.1.4.1.2636.3.39.1.15.1.1.14.1.7

INTEGER · Integer32

Priority in terms of responsiveness

jnxSurvivableStatsLastDownTime

1.3.6.1.4.1.2636.3.39.1.15.1.1.14.1.8

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

The last time when the survivable call service was down.

jnxSurvivableStatsLastDownLen

1.3.6.1.4.1.2636.3.39.1.15.1.1.14.1.9

Unsigned32

How long (miliseconds) it was down last time.

jnxSurvivableStatsTotalDownTime

1.3.6.1.4.1.2636.3.39.1.15.1.1.14.1.10

Unsigned32

Total down time in miliseconds.

jnxSurvivableStatsTimesDown

1.3.6.1.4.1.2636.3.39.1.15.1.1.14.1.11

Unsigned32

The number of times it was down

jnxSurvivableStatsMinResponse

1.3.6.1.4.1.2636.3.39.1.15.1.1.14.1.12

Unsigned32

The minimum response time in miliseconds.

jnxSurvivableStatsMaxResponse

1.3.6.1.4.1.2636.3.39.1.15.1.1.14.1.13

Unsigned32

The maximum response time in miliseconds.

jnxSurvivableStatsAvgResponse

1.3.6.1.4.1.2636.3.39.1.15.1.1.14.1.14

Unsigned32

The average response time in miliseconds.

JUNIPER-RTM-MIB

Scalars (6)

Tables (12)

Scalar details

jnxFeaturesLiveAttendantExtension

jnxFeaturesLiveAttendantStartTime

jnxFeaturesLiveAttendantEndTime

jnxFeaturesAttendantRingCount

jnxFeaturesVoicemailExtension

jnxFeaturesVoicemailRemoteAccessNumber

Table details

jnxSipTemplateTable

jnxSipTemplateName

jnxDtmfMethod

jnxCallerIdTransmit

jnxInheritExtensionsFrom

jnxInheritExtensionsTo

jnxClassOfRestriction

jnxCodecG711MU

jnxCodecG711A

jnxCodecG729AB

jnxAnalogTemplateTable

jnxAnalogTemplateName

jnxAanalogCallerIdTransmit

jnxAnalogVoiceActivityDetection

jnxAnalogComfortNoiseGeneration

jnxAnalogClassOfRestriction

jnxStationTable

jnxStationName

jnxStationExtension

jnxStationRestriction

jnxStationCallerId

jnxStationDID

jnxStationDILTdmInterface

jnxStationDILTimeSlotNumber

jnxStationAuthId

jnxStationType

jnxStationTemplate

jnxStationTdmInterface

jnxStationTimeSlotNumber

jnxSurvivableCallServiceTable

jnxSurvivableCallServiceName

jnxSurvivableCallServicePeerCallServer

jnxSurvivableCallServiceSipProtocolPort

jnxSurvivableCallServiceSipProtocolTransport

jnxSurvivableCallServiceHeartbeatNormalInterval

jnxSurvivableCallServiceRegistrationExpiryTimeout

jnxSurvivableCallServiceSipTimeout

jnxSurvivableCallServiceMonitorTimeout

jnxSurvivableCallServiceHeartbeatSurvivableInterval

jnxSurvivableCallServiceResponseThresholdMinimum

jnxSurvivableCallServiceServicePointZone

jnxSurvivableCallServiceDialPlan

jnxTrunkConfigTable

jnxTrunkConfigName

jnxTrunkConfigType

jnxTrunkConfigTdmInterface

jnxTrunkConfigT1CasGroupTimeSlots

jnxTrunkConfigT1CasGroupSignaling

jnxDigitManipulationTable

jnxDigitTransformName

jnxDigitTransformRegularExpression

jnxPeerCallServerTable

jnxPeerCallServerName

jnxPeerCallServerDescription

jnxPeerCallServerAddress

jnxPeerCallServerSipProtocolPort

jnxPeerCallServerSipProtocolTransport

jnxPeerCallServerCodecG711MU

jnxPeerCallServerCodecG711A

jnxPeerCallServerCodecG729AB

jnxPeerCallServerDtmfMethod

jnxPeerCallServerPstnAccessNumber

jnxPeerCallServerAuthId

jnxDialPlanTable

jnxDialPlanName

jnxDialPlanDigitPattern

jnxDialPlanCallType

jnxDialPlanTrunkGroupList

jnxClassOfRestrictionTable