jnxSoftGreStaticTunnelsTotalCount
1.3.6.1.4.1.2636.3.92.1.1.1.1
Counter32
Number of static GRE tunnels.
JUNIPER-SOFT-GRE-MIB
2025-01-01
The Soft GRE MIB for the Juniper Networks enterprise.
Download JUNIPER-SOFT-GRE-MIB.txt Open JUNIPER-SOFT-GRE-MIB.txt in a new tab
Scalars (7)
Tables (3)
| Name | OID |
|---|---|
| jnxSoftGreLogicalIfTable | 1.3.6.1.4.1.2636.3.92.1.1.2.1 |
| jnxSoftGreTunnelIfTable | 1.3.6.1.4.1.2636.3.92.1.1.2.2 |
| jnxSoftGreSessionIfTable | 1.3.6.1.4.1.2636.3.92.1.1.2.3 |
END OF TOC
Scalar details
jnxSoftGreDynamicTunnelsTotalCount
1.3.6.1.4.1.2636.3.92.1.1.1.2
Counter32
Number of Dynamic GRE tunnels.
jnxSoftGreStaticSessionsTotalCount
1.3.6.1.4.1.2636.3.92.1.1.1.3
Counter32
Total number of static sessions.
jnxSoftGrePPPoESessionsTotalCount
1.3.6.1.4.1.2636.3.92.1.1.1.4
Counter32
Total number of PPPoE sessions.
jnxSoftGreDHCPSessionsTotalCount
1.3.6.1.4.1.2636.3.92.1.1.1.5
Counter32
Total number of DHCP sessions.
jnxSoftGreVLANSessionsTotalCount
1.3.6.1.4.1.2636.3.92.1.1.1.6
Counter32
Total number of VLAN sessions.
jnxSoftGreUserSessionsTotalCount
1.3.6.1.4.1.2636.3.92.1.1.1.7
Counter32
Total number of User sessions.
Table details
jnxSoftGreLogicalIfTable
1.3.6.1.4.1.2636.3.92.1.1.2.1
Index: jnxSoftGreLogicalIfIndex
The entries in this table represent GRE Tunnel.
jnxSoftGreLogicalIfIndex
1.3.6.1.4.1.2636.3.92.1.1.2.1.1.1
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
The ifIndex of the GRE Tunnel.
jnxSoftGreLogicalInterfaceName
1.3.6.1.4.1.2636.3.92.1.1.2.1.1.2
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The InterfaceName associated with this tunnel.
jnxSoftGreLogicalIfStaticTunnelsCount
1.3.6.1.4.1.2636.3.92.1.1.2.1.1.3
Counter32
The static tunnel Count for the logical interface.
jnxSoftGreLogicalIfDynamicTunnelsCount
1.3.6.1.4.1.2636.3.92.1.1.2.1.1.4
Counter32
The dynamic tunnel Count for the logical interface.
jnxSoftGreLogicalIfStaticSessionsCount
1.3.6.1.4.1.2636.3.92.1.1.2.1.1.5
Counter32
The static session Count for the logical interface.
jnxSoftGreLogicalIfPPPoESessionsCount
1.3.6.1.4.1.2636.3.92.1.1.2.1.1.6
Counter32
The pppoe session Count for the logical interface.
jnxSoftGreLogicalIfDHCPSessionsCount
1.3.6.1.4.1.2636.3.92.1.1.2.1.1.7
Counter32
The dhcp session Count for the logical interface.
jnxSoftGreLogicalIfVLANSessionsCount
1.3.6.1.4.1.2636.3.92.1.1.2.1.1.8
Counter32
The vlan session Count for the logical interface.
jnxSoftGreLogicalIfUserSessionsCount
1.3.6.1.4.1.2636.3.92.1.1.2.1.1.9
Counter32
The user session Count for the logical interface.
jnxSoftGreTunnelIfTable
1.3.6.1.4.1.2636.3.92.1.1.2.2
Index: jnxSoftGreTunnelIfIndex
The entries in this table represent GRE Tunnel.
jnxSoftGreTunnelIfIndex
1.3.6.1.4.1.2636.3.92.1.1.2.2.1.1
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
The ifIndex of the GRE Tunnel.
jnxSoftGreTunnelInterfaceName
1.3.6.1.4.1.2636.3.92.1.1.2.2.1.2
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The InterfaceName associated with this tunnel.
jnxSoftGreTunnelLocalAddress
1.3.6.1.4.1.2636.3.92.1.1.2.2.1.3
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The local ip address associated with this tunnel.
jnxSoftGreTunnelRemoteAddress
1.3.6.1.4.1.2636.3.92.1.1.2.2.1.4
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The remote ip address associated with this tunnel.
jnxSoftGreTunnelRoutingInstance
1.3.6.1.4.1.2636.3.92.1.1.2.2.1.5
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The routing instance associated with this tunnel.
jnxSoftGreTunnelStaticSessionsCount
1.3.6.1.4.1.2636.3.92.1.1.2.2.1.6
Counter32
The static session Count for the tunnel.
jnxSoftGreTunnelPPPoESessionsCount
1.3.6.1.4.1.2636.3.92.1.1.2.2.1.7
Counter32
The pppoe session Count for the tunnel.
jnxSoftGreTunnelDHCPSessionsCount
1.3.6.1.4.1.2636.3.92.1.1.2.2.1.8
Counter32
The dhcp session Count for the tunnel.
jnxSoftGreTunnelVLANSessionsCount
1.3.6.1.4.1.2636.3.92.1.1.2.2.1.9
Counter32
The vlan session Count for the tunnel.
jnxSoftGreTunnelUserSessionsCount
1.3.6.1.4.1.2636.3.92.1.1.2.2.1.10
Counter32
The user session Count for the tunnel.
jnxSoftGreSessionIfTable
1.3.6.1.4.1.2636.3.92.1.1.2.3
Index: jnxSoftGreSessionTunnelIfIndex · jnxSoftGreSessionIfIndex
The entries in this table represent User Sessions per GRE Tunnel.
jnxSoftGreSessionTunnelIfIndex
1.3.6.1.4.1.2636.3.92.1.1.2.3.1.1
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
The ifIndex of the GRE tunnel for User Session.
jnxSoftGreSessionIfIndex
1.3.6.1.4.1.2636.3.92.1.1.2.3.1.2
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
The ifIndex of the GRE User Session.
jnxSoftGreSessionTunnelInterfaceName
1.3.6.1.4.1.2636.3.92.1.1.2.3.1.3
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The InterfaceName associated with the tunnel for User Session.
jnxSoftGreSessionInterfaceName
1.3.6.1.4.1.2636.3.92.1.1.2.3.1.4
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The InterfaceName associated with this User Session.