DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The primary server address.
jnxUserFwPriServQuerySentNum
1.3.6.1.4.1.2636.3.89.1.2.2
Unsigned32
Batch query sent number to primary server.
jnxUserFwPriServQueryRespNum
1.3.6.1.4.1.2636.3.89.1.2.3
Unsigned32
Batch query total response number to primary server.
jnxUserFwPriServQueryErrNum
1.3.6.1.4.1.2636.3.89.1.2.4
Unsigned32
Batch query error response number to primary server.
jnxUserFwPriServIPQuerySentNum
1.3.6.1.4.1.2636.3.89.1.2.5
Unsigned32
IP query sent number to primary server.
jnxUserFwPriServIPQueryRespNum
1.3.6.1.4.1.2636.3.89.1.2.6
Unsigned32
IP query total response number to primary server.
jnxUserFwPriServIPQueryErrNum
1.3.6.1.4.1.2636.3.89.1.2.7
Unsigned32
IP query error response number to primary server.
jnxUserFwSecServAddress
1.3.6.1.4.1.2636.3.89.1.2.8
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The secondary server address.
jnxUserFwSecServQuerySentNum
1.3.6.1.4.1.2636.3.89.1.2.9
Unsigned32
Batch query sent number to secondary server.
jnxUserFwSecServQueryRespNum
1.3.6.1.4.1.2636.3.89.1.2.10
Unsigned32
Batch query total response number to secondary server.
jnxUserFwSecServQueryErrNum
1.3.6.1.4.1.2636.3.89.1.2.11
Unsigned32
Batch query error response number to secondary server.
jnxUserFwSecServIPQuerySentNum
1.3.6.1.4.1.2636.3.89.1.2.12
Unsigned32
IP query sent number to secondary server.
jnxUserFwSecServIPQueryRespNum
1.3.6.1.4.1.2636.3.89.1.2.13
Unsigned32
IP query total response number to secondary server.
jnxUserFwSecServIPQueryErrNum
1.3.6.1.4.1.2636.3.89.1.2.14
Unsigned32
IP query error response number to secondary server.
Table details
jnxUserFwDomainAuthTable
1.3.6.1.4.1.2636.3.89.1.1.1
Index: jnxUserFwDomain
A list of authentication table entries. Data showed should be consistent with CLI: show services user-identification authentication-table counter. There no distinction between primary and secondary for the time being.
jnxUserFwDomain
1.3.6.1.4.1.2636.3.89.1.1.1.1.1
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The user firewall domain name.
jnxUserFwAuthCPCounter
1.3.6.1.4.1.2636.3.89.1.1.1.1.2
Unsigned32
The counter of cp authentication entries.
jnxUserFwAuthJIMSCounter
1.3.6.1.4.1.2636.3.89.1.1.1.1.3
Unsigned32
The counter of JIMS(Juniper Identity Management Service) authentication entries.
jnxUserFwAuthValidCounter
1.3.6.1.4.1.2636.3.89.1.1.1.1.4
Unsigned32
The counter of valid authentication entries.
jnxUserFwAuthPendingCounter
1.3.6.1.4.1.2636.3.89.1.1.1.1.5
Unsigned32
The counter of pending authentication entries.
jnxUserFwAuthInvalidCounter
1.3.6.1.4.1.2636.3.89.1.1.1.1.6
Unsigned32
The counter of invalid authentication entries.
jnxUserFwAuthTotalCounter
1.3.6.1.4.1.2636.3.89.1.1.1.1.7
Unsigned32
The counter of total authentication entries.
jnxUserFwAuthADCounter
1.3.6.1.4.1.2636.3.89.1.1.1.1.8
Unsigned32
The counter of AD(Active Directory) authentication entries.
Table to check status information for the Active Directory domain controllers configured for the integrated user firewall feature. This table also defines OID for numbers of total queries and failed queries to the event log on the domain controller for address-to-user mappings.
jnxUserFwADDomain
1.3.6.1.4.1.2636.3.89.1.1.2.1.1
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
Domain name.
jnxUserFwADDomCtrlerAddr
1.3.6.1.4.1.2636.3.89.1.1.2.1.2
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The ip address of doamin controller.
jnxUserFwADDomCtrlerName
1.3.6.1.4.1.2636.3.89.1.1.2.1.3
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
Domain controller name.
jnxUserFwADDomCtrlerConnStatus
1.3.6.1.4.1.2636.3.89.1.1.2.1.4
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
Domain controller connection status.
jnxUserFwADDomTotalLogQuery
1.3.6.1.4.1.2636.3.89.1.1.2.1.5
Unsigned32
Total log query times.
jnxUserFwADDomFailedLogQuery
1.3.6.1.4.1.2636.3.89.1.1.2.1.6
Unsigned32
Failed log query times.
jnxUserFwADDomRecordsFetched
1.3.6.1.4.1.2636.3.89.1.1.2.1.7
Unsigned32
Number of records fetched.
jnxUserFwLDAPTable
1.3.6.1.4.1.2636.3.89.1.1.3
Index: jnxUserFwLDAPDomain · jnxUserFwLDAPHost
LDAP or user-group-mapping query statistics for each configured LDAP server.
jnxUserFwLDAPDomain
1.3.6.1.4.1.2636.3.89.1.1.3.1.1
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
LDAP domain name.
jnxUserFwLDAPHost
1.3.6.1.4.1.2636.3.89.1.1.3.1.2
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
LDAP Host.
jnxUserFwLDAPTotalQuery
1.3.6.1.4.1.2636.3.89.1.1.3.1.3
Unsigned32
Total LDAP query number.
jnxUserFwLDAPFailedQuery
1.3.6.1.4.1.2636.3.89.1.1.3.1.4
Unsigned32
LDAP failed query number.
jnxUserFwProbeTable
1.3.6.1.4.1.2636.3.89.1.1.4
Index: jnxUserFwDomainName
PC Probe statistics.
jnxUserFwDomainName
1.3.6.1.4.1.2636.3.89.1.1.4.1.1
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a