panNumberOfModems
1.3.6.1.4.1.25461.2.1.2.15.7.1
Unsigned32
The total number of cellular modems in the system.
PAN-CELLULAR-MIB
2026-03-04
A MIB module containing definitions of managed objects for monitoring cellular modem interfaces on Palo Alto Networks devices. CAPACITY LIMITS: - Maximum modems per device: 4 - Maximum SIM slots per modem: 2 - Maximum interfaces per SIM: 1 - Maximum sub-interfaces per SIM: 8 POLLING RECOMMENDATIONS: - All stats and signals: 30 second intervals - Notification state objects: 30 second intervals TRAP RATE CONTROL: - Signal strength traps: Maximum 1 per 10 minutes per modem - PS state traps: Maximum 1 per 90 seconds per modem INDEX STABILITY: All table indices are based on hardware slot positions and remain constant across reboots and HA failover events.
Download PAN-CELLULAR-MIB.txt Open PAN-CELLULAR-MIB.txt in a new tab
Scalars (6)
Tables (6)
END OF TOC
Scalar details
panNumberOfInterfaces
1.3.6.1.4.1.25461.2.1.2.15.7.2
Unsigned32
The total number of cellular interfaces in the system.
panNumberOfSubInterfaces
1.3.6.1.4.1.25461.2.1.2.15.7.3
Unsigned32
The total number of cellular sub-interfaces in the system. Returns 0 when sub-interfaces are not supported or not configured.
panNumberOfAPNDNNProfiles
1.3.6.1.4.1.25461.2.1.2.15.7.4
Unsigned32
The total number of unique APN/DNN profiles in the system (deduplicated count from APNDNNTable). Returns 0 when no profiles are configured.
panCellularSigStrengthLow
1.3.6.1.4.1.25461.2.1.2.15.8.1
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
Indicates whether any modem has low signal strength. true(1) if any modem's signal strength is below FAIR (i.e., DEADZONE or POOR), false(2) otherwise.
panCellularPSDetached
1.3.6.1.4.1.25461.2.1.2.15.8.2
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
Indicates whether any interface has lost PS (Packet Switched) connectivity. true(1) if any interface is PS detached, false(2) if all interfaces are attached.
Table details
panCellularModemTable
1.3.6.1.4.1.25461.2.1.2.15.1
Index: panIndexOfModem
A table of cellular modem hardware information. Each row represents one cellular modem installed in the device.
panIndexOfModem
1.3.6.1.4.1.25461.2.1.2.15.1.1.1
Integer32 (1..2147483647)
A unique identifier(non-zero) for each cellular modem. Values are contiguous starting from 1 and remain constant across reboots.
panStatusOfModem
1.3.6.1.4.1.25461.2.1.2.15.1.1.2
INTEGER1 = unknown2 = bootmode3 = initFailed4 = online5 = lowpower6 = attached7 = detached8 = dataConnected9 = fwUpgrade10 = airplane · Integer32
State of modem described as an integer. unknown (1), bootmode(2), initFailed(3), online(4), lowpower(5), attached(6), detached(7), dataConnected(8), fwUpgrade(9), airplane(10)
panFSNOfModem
1.3.6.1.4.1.25461.2.1.2.15.1.1.3
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..32) · OCTET STRING · hint 255a
A display string to represent the Factory Serial Number of the modem.
panFWVersionOfModem
1.3.6.1.4.1.25461.2.1.2.15.1.1.4
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..64) · OCTET STRING · hint 255a
A display string to represent the current firmware version of the cellular modem.
panIMEIOfModem
1.3.6.1.4.1.25461.2.1.2.15.1.1.5
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..20) · OCTET STRING · hint 255a
A display string to represent the International Mobile Equipment Identity of the cellular modem.
panNumberOfSIMs
1.3.6.1.4.1.25461.2.1.2.15.1.1.6
Integer32
The number of SIM slots available on this modem.
panESNOfModem
1.3.6.1.4.1.25461.2.1.2.15.1.1.7
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..20) · OCTET STRING · hint 255a
A display string to represent the Electronic Serial Number of the cellular modem.
panTempOfModem
1.3.6.1.4.1.25461.2.1.2.15.1.1.8
Integer32
The current temperature of the cellular modem in degrees Celsius.
panNumberOfSignalEntries
1.3.6.1.4.1.25461.2.1.2.15.1.1.9
Integer32
The number of signal entries available on this modem.
panDHCPRelayOfModem
1.3.6.1.4.1.25461.2.1.2.15.1.1.10
INTEGER1 = disabled2 = enabled3 = error · Integer32
The DHCP Relay status of the cellular modem. disabled(1), enabled(2), error(3)
panCellularSignalTable
1.3.6.1.4.1.25461.2.1.2.15.2
Index: panCellularSignalModemIndex · panCellularSignalSIMIndex
A table of signal quality metrics for cellular modems. Each row represents signal data for one SIM slot on a cellular modem. Uses a composite index of modem index and SIM slot number.
panCellularSignalModemIndex
1.3.6.1.4.1.25461.2.1.2.15.2.1.1
Integer32 (1..2147483647)
The modem index this signal entry belongs to.
panCellularSignalSIMIndex
1.3.6.1.4.1.25461.2.1.2.15.2.1.2
Integer32 (1..2)
The SIM slot number within the modem.
panCellularSignalRSSI
1.3.6.1.4.1.25461.2.1.2.15.2.1.3
Integer32
The Received Signal Strength Indicator in dBm.
panCellularSignalSINR
1.3.6.1.4.1.25461.2.1.2.15.2.1.4
Integer32
The Signal to Interference plus Noise Ratio in dB.
panCellularSignalRSRP
1.3.6.1.4.1.25461.2.1.2.15.2.1.5
Integer32
The Reference Signal Received Power in dBm.
panCellularSignalRSRQ
1.3.6.1.4.1.25461.2.1.2.15.2.1.6
Integer32
The Reference Signal Received Quality in dB.
panCellularSignalStrength
1.3.6.1.4.1.25461.2.1.2.15.2.1.7
INTEGER1 = unknown2 = deadzone3 = poor4 = fair5 = good6 = excellent · Integer32
The signal strength quality level of the cellular modem: unknown(1) - No signal data available (inactive SIM slot) deadzone(2) - No usable signal poor(3) - Weak signal, may have connectivity issues fair(4) - Acceptable signal quality good(5) - Good signal quality excellent(6) - Strong signal quality
panCellularSignalRFBand
1.3.6.1.4.1.25461.2.1.2.15.2.1.8
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..32) · OCTET STRING · hint 255a
The RF band of cellular modem currently in use.
panCellularSignalRFChannel
1.3.6.1.4.1.25461.2.1.2.15.2.1.9
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..16) · OCTET STRING · hint 255a
The RF channel number of cellular modem currently in use.
panCellularSIMTable
1.3.6.1.4.1.25461.2.1.2.15.3
Index: panSIMModemIndex · panSIMSlotIndex
A table of SIM card information. Each row represents one SIM slot on a cellular modem. Uses a composite index of modem index and SIM slot number.
panSIMModemIndex
1.3.6.1.4.1.25461.2.1.2.15.3.1.1
Integer32 (1..2147483647)
The modem index this SIM belongs to.
panSIMSlotIndex
1.3.6.1.4.1.25461.2.1.2.15.3.1.2
Integer32 (1..2)
The SIM slot number within the modem.
panSIMIMSI
1.3.6.1.4.1.25461.2.1.2.15.3.1.3
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..20) · OCTET STRING · hint 255a
The International Mobile Subscriber Identity of the SIM card.
panSIMHomeCarrier
1.3.6.1.4.1.25461.2.1.2.15.3.1.4
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..64) · OCTET STRING · hint 255a
The home carrier name for this SIM card.
panSIMStatus
1.3.6.1.4.1.25461.2.1.2.15.3.1.5
INTEGER1 = present2 = absent3 = error4 = unknown · Integer32
The status of the SIM card in this slot represented as an integer: present(1), absent(2), error(3), unknown(4)
panSIMICCID
1.3.6.1.4.1.25461.2.1.2.15.3.1.6
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..24) · OCTET STRING · hint 255a
The Integrated Circuit Card Identifier of the SIM card.
panSIMPinState
1.3.6.1.4.1.25461.2.1.2.15.3.1.7
INTEGER1 = unknown2 = enabledNotVerified3 = enabledVerified4 = disabled5 = blocked6 = permBlocked · Integer32
The PIN verification state of the SIM Card represented as an integer: unknown(1), enabledNotVerified(2), enabledVerified(3), disabled(4), blocked(5), permBlocked(6)
panSIMPinRetries
1.3.6.1.4.1.25461.2.1.2.15.3.1.8
Integer32
The number of remaining PIN retry attempts for this SIM card.
panCellularAPNDNNTable
1.3.6.1.4.1.25461.2.1.2.15.4
Index: panAPNDNNIndex
A table of APN/DNN profile configurations. Each row represents a unique APN/DNN profile. Profiles are deduplicated by profile-name. Cross-referenced by panCellularInterfaceTable and panCellularSubInterfaceTable.
panAPNDNNIndex
1.3.6.1.4.1.25461.2.1.2.15.4.1.1
Integer32 (1..2147483647)
A unique stable index for each APN/DNN profile, derived from the global APN profile configuration. Values are positive integers starting from 1 and remain consistent across interface attach/detach operations for the same profile.
panAPNDNNProfileName
1.3.6.1.4.1.25461.2.1.2.15.4.1.2
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..64) · OCTET STRING · hint 255a
The unique APN/DNN profile name. This is the deduplication key — the same profile-name always maps to the same configuration.
panAPNDNNName
1.3.6.1.4.1.25461.2.1.2.15.4.1.3
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..64) · OCTET STRING · hint 255a
The Access Point Name (APN) or Data Network Name (DNN).
panAPNDNNPdpType
1.3.6.1.4.1.25461.2.1.2.15.4.1.4
INTEGER1 = ipv42 = ipv63 = ipv4v6 · Integer32
The PDP/PDN type for this profile: ipv4(1) - IPv4 only ipv6(2) - IPv6 only ipv4v6(3) - Dual-stack IPv4 and IPv6
panAPNDNNAuthType
1.3.6.1.4.1.25461.2.1.2.15.4.1.5
INTEGER1 = none2 = pap3 = chap4 = papOrChap · Integer32
The authentication type for this profile: none(1) - No authentication pap(2) - PAP authentication chap(3) - CHAP authentication papOrChap(4) - PAP or CHAP authentication
panAPNDNNNetworkType
1.3.6.1.4.1.25461.2.1.2.15.4.1.6
INTEGER1 = apn2 = dnn · Integer32
The network type for this profile: apn(1) - Access Point Name (4G/LTE) dnn(2) - Data Network Name (5G NR)
panAPNDNNSliceDiff
1.3.6.1.4.1.25461.2.1.2.15.4.1.7
Integer32
The Slice Differentiator (SD) for 5G network slicing. Returns 0 when not configured or not applicable (non-5G profiles).
panAPNDNNSliceServiceType
1.3.6.1.4.1.25461.2.1.2.15.4.1.8
Integer32
The Slice/Service Type (SST) for 5G network slicing. Returns 0 when not configured or not applicable (non-5G profiles).
panCellularInterfaceTable
1.3.6.1.4.1.25461.2.1.2.15.5
Index: panCellularIfIndex
A table of cellular interface and network information. Each row represents one cellular interface. Network data comes from the modem's active SIM.
panCellularIfIndex
1.3.6.1.4.1.25461.2.1.2.15.5.1.1
Integer32 (1..2147483647)
A unique index for the cellular interface.
panCellularIfIfTableIndex
1.3.6.1.4.1.25461.2.1.2.15.5.1.2
Integer32
This value corresponds to the ifIndex in the standard IF-MIB ifTable, allowing cross-reference between the cellular MIB and the standard interfaces table. Returns 0 if the if-index has not been assigned.
panCellularIfName
1.3.6.1.4.1.25461.2.1.2.15.5.1.3
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..32) · OCTET STRING · hint 255a
The name of the cellular interface.
panCellularIfModemIndex
1.3.6.1.4.1.25461.2.1.2.15.5.1.4
Integer32
The modem index this interface belongs to.
panCellularIfSIMIndex
1.3.6.1.4.1.25461.2.1.2.15.5.1.5
Integer32 (1..2)
The active SIM slot index (1 or 2) for this interface.
panCellularIfServiceDisplay
1.3.6.1.4.1.25461.2.1.2.15.5.1.6
INTEGER1 = noService2 = cdmaRtt3 = cdmaEvdo4 = amps5 = gsm6 = umts7 = wlan8 = gps9 = lte10 = tdscdma11 = nr5g12 = unknown · Integer32
The Radio Access Technology currently in use: noService(1) - No cellular service cdmaRtt(2) - CDMA 1xRTT cdmaEvdo(3) - CDMA EV-DO amps(4) - AMPS (legacy) gsm(5) - GSM/GPRS/EDGE umts(6) - UMTS/HSPA/HSPA+ wlan(7) - WLAN offload gps(8) - GPS only lte(9) - LTE/LTE-A tdscdma(10) - TD-SCDMA nr5g(11) - 5G NR unknown(12) - Unknown technology
panCellularIfCGI
1.3.6.1.4.1.25461.2.1.2.15.5.1.7
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..32) · OCTET STRING · hint 255a
The Cell Global Identity of the serving cell tower.
panCellularIfPCI
1.3.6.1.4.1.25461.2.1.2.15.5.1.8
Integer32
The Physical Cell ID of the serving cell tower connected to the cellular modem.
panCellularIfAPNName
1.3.6.1.4.1.25461.2.1.2.15.5.1.9
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..64) · OCTET STRING · hint 255a
The Access Point Name (APN) for the active SIM. When an APN profile is configured, this shows the configured apn-name. When no profile is configured (auto-APN mode), this shows the APN assigned by the network from the active data session.
panCellularIfAPNProfileSIM1
1.3.6.1.4.1.25461.2.1.2.15.5.1.10
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..64) · OCTET STRING · hint 255a
The APN profile name configured for SIM slot 1. Returns 'auto' if no APN profile is configured (auto-APN mode).
panCellularIfAPNDNNIndexSIM1
1.3.6.1.4.1.25461.2.1.2.15.5.1.11
Integer32
Cross-reference to panAPNDNNIndex for SIM slot 1. Returns 0 if no APN/DNN profile is configured for SIM1.
panCellularIfAPNProfileSIM2
1.3.6.1.4.1.25461.2.1.2.15.5.1.12
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..64) · OCTET STRING · hint 255a
The APN profile name configured for SIM slot 2. Returns 'auto' if no APN profile is configured (auto-APN mode).
panCellularIfAPNDNNIndexSIM2
1.3.6.1.4.1.25461.2.1.2.15.5.1.13
Integer32
Cross-reference to panAPNDNNIndex for SIM slot 2. Returns 0 if no APN/DNN profile is configured for SIM2.
panCellularIfIPv4Address
1.3.6.1.4.1.25461.2.1.2.15.5.1.14
IpAddress SIZE (4)
The IPv4 address assigned to the data session. Returns 0.0.0.0 if no IPv4 address is assigned.
panCellularIfIPv6Address
1.3.6.1.4.1.25461.2.1.2.15.5.1.15
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..46) · OCTET STRING · hint 255a
The IPv6 address assigned to the data session as a display string. Returns '::' if no IPv6 address is assigned.
panCellularIfPSState
1.3.6.1.4.1.25461.2.1.2.15.5.1.16
INTEGER1 = unknown2 = attached3 = detached · Integer32
The Packet Switched service state: unknown(1) - PS state cannot be determined attached(2) - PS attached, data service available detached(3) - PS detached, no data service
panCellularIfTAC
1.3.6.1.4.1.25461.2.1.2.15.5.1.17
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..16) · OCTET STRING · hint 255a
The Tracking Area Code of the cellular modem.
panCellularIfLAC
1.3.6.1.4.1.25461.2.1.2.15.5.1.18
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..16) · OCTET STRING · hint 255a
The Location Area Code of the cellular modem.
panCellularIfRoaming
1.3.6.1.4.1.25461.2.1.2.15.5.1.19
INTEGER1 = roaming2 = home3 = flashing4 = unknown · Integer32
The roaming status of cellular modem represented as an integer: roaming(1) - Currently roaming home(2) - On home network flashing(3) - Roaming indicator flashing unknown(4) - Roaming status unknown
panCellularIfMCCMNC
1.3.6.1.4.1.25461.2.1.2.15.5.1.20
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..16) · OCTET STRING · hint 255a
The Mobile Country Code and Mobile Network Code of the serving network.
panCellularIfRegState
1.3.6.1.4.1.25461.2.1.2.15.5.1.21
INTEGER1 = notRegistered2 = registered3 = searching4 = denied5 = unknown · Integer32
The network registration state: notRegistered(1) - Not registered, not searching registered(2) - Registered on home network searching(3) - Not registered, searching denied(4) - Registration denied unknown(5) - Registration state unknown
panCellularIfActivationState
1.3.6.1.4.1.25461.2.1.2.15.5.1.22
INTEGER1 = active2 = inactive3 = unknown · Integer32
The data session activation state: active(1) - Data session active inactive(2) - No active data session unknown(3) - Activation state unknown
panCellularIfIPv4MTU
1.3.6.1.4.1.25461.2.1.2.15.5.1.23
Integer32
The IPv4 MTU for this cellular interface. Returns 0 if not applicable.
panCellularIfIPv6MTU
1.3.6.1.4.1.25461.2.1.2.15.5.1.24
Integer32
The IPv6 MTU for this cellular interface. Returns 0 if not applicable.
panCellularIfLatitude
1.3.6.1.4.1.25461.2.1.2.15.5.1.25
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..24) · OCTET STRING · hint 255a
The GPS latitude of the cellular modem location.
panCellularIfLongitude
1.3.6.1.4.1.25461.2.1.2.15.5.1.26
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..24) · OCTET STRING · hint 255a
The GPS longitude of the cellular modem location.
panCellularIfGPSState
1.3.6.1.4.1.25461.2.1.2.15.5.1.27
INTEGER1 = acquiring2 = acquired3 = disabled4 = error5 = unknown · Integer32
The GPS acquisition state: acquiring(1) - GPS fix in progress acquired(2) - GPS fix acquired, location available disabled(3) - GPS is disabled error(4) - GPS error condition unknown(5) - GPS state unknown
panCellularIfCellSwitches
1.3.6.1.4.1.25461.2.1.2.15.5.1.28
Counter32
The number of cell tower switches since the last counter reset.
panCellularIfModemResets
1.3.6.1.4.1.25461.2.1.2.15.5.1.29
Counter32
The number of modem resets since the last counter reset.
panCellularIfModemPowercycles
1.3.6.1.4.1.25461.2.1.2.15.5.1.30
Counter32
The number of modem power cycles since the last counter reset.
panCellularIfRadioResets
1.3.6.1.4.1.25461.2.1.2.15.5.1.31
Counter32
The number of radio resets since the last counter reset.
panCellularIfNetworkDisconnects
1.3.6.1.4.1.25461.2.1.2.15.5.1.32
Counter32
The number of network disconnects since the last counter reset.
panCellularIfSIMSwitchovers
1.3.6.1.4.1.25461.2.1.2.15.5.1.33
Counter32
The number of SIM switchovers since the last counter reset.
panCellularIfL3RecoveryActions
1.3.6.1.4.1.25461.2.1.2.15.5.1.34
Counter32
The number of L3 recovery actions since the last counter reset.
panCellularIfCellID
1.3.6.1.4.1.25461.2.1.2.15.5.1.35
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..24) · OCTET STRING · hint 255a
The network-assigned Cell ID of the serving cell. Returns an empty string when not available.
panCellularSubInterfaceTable
1.3.6.1.4.1.25461.2.1.2.15.6
Index: panCellularSubIfParentIndex · panCellularSubIfIndex
A table of cellular sub-interface information. Each row represents one sub-interface on a cellular interface. Uses a composite index of parent interface index and sub-interface index.
panCellularSubIfParentIndex
1.3.6.1.4.1.25461.2.1.2.15.6.1.1
Integer32 (1..2147483647)
The parent cellular interface index.
panCellularSubIfIndex
1.3.6.1.4.1.25461.2.1.2.15.6.1.2
Integer32 (1..2147483647)
A unique sub-interface index within the parent cellular interface.
panCellularSubIfIfTableIndex
1.3.6.1.4.1.25461.2.1.2.15.6.1.3
Integer32
This value corresponds to the ifIndex in the standard IF-MIB ifTable, allowing cross-reference between the cellular MIB and the standard interfaces table. Returns 0 if the if-index has not been assigned.
panCellularSubIfName
1.3.6.1.4.1.25461.2.1.2.15.6.1.4
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..32) · OCTET STRING · hint 255a
The name of the cellular sub-interface.
panCellularSubIfModemIndex
1.3.6.1.4.1.25461.2.1.2.15.6.1.5
Integer32
The modem index associated with this sub-interface.
panCellularSubIfSIMIndex
1.3.6.1.4.1.25461.2.1.2.15.6.1.6
Integer32 (1..2)
The SIM slot index associated with this sub-interface. Sub-interfaces 1-7 are associated with SIM 1. On platforms with dual SIM per modem, sub-interfaces 8-14 are associated with SIM 2.
panCellularSubIfApnName
1.3.6.1.4.1.25461.2.1.2.15.6.1.7
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..64) · OCTET STRING · hint 255a
The Access Point Name (APN) for this sub-interface. When an APN profile is configured, this shows the configured apn-name. When no profile is configured (auto-APN mode), this shows the APN assigned by the network from the active data session.
panCellularSubIfApnProfile
1.3.6.1.4.1.25461.2.1.2.15.6.1.8
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..64) · OCTET STRING · hint 255a
The APN profile name configured for this sub-interface. Returns 'auto' if no APN profile is configured (auto-APN mode).
panCellularSubIfAPNDNNIndex
1.3.6.1.4.1.25461.2.1.2.15.6.1.9
Integer32
Cross-reference to panAPNDNNIndex for this sub-interface. Returns 0 if no APN/DNN profile is configured.
panCellularSubIfIPv4Address
1.3.6.1.4.1.25461.2.1.2.15.6.1.10
IpAddress SIZE (4)
The IPv4 address assigned to this sub-interface. Returns 0.0.0.0 if no IPv4 address is assigned.
panCellularSubIfIPv6Address
1.3.6.1.4.1.25461.2.1.2.15.6.1.11
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..46) · OCTET STRING · hint 255a
The IPv6 address assigned to this sub-interface as a text string. Returns '::' if no IPv6 address is assigned.
panCellularSubIfIPv4MTU
1.3.6.1.4.1.25461.2.1.2.15.6.1.12
Integer32
The IPv4 MTU for this sub-interface. Returns 0 if not applicable.
panCellularSubIfIPv6MTU
1.3.6.1.4.1.25461.2.1.2.15.6.1.13
Integer32
The IPv6 MTU for this sub-interface. Returns 0 if not applicable.