DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
Full software version. The first two components of the full version are the major and minor versions. The third component indicates the maintenance release number and the fourth, the build number.
panSysHwVersion
1.3.6.1.4.1.25461.2.1.2.1.2
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
Hardware version of the unit.
panSysSerialNumber
1.3.6.1.4.1.25461.2.1.2.1.3
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The serial number of the unit. If not available, an empty string is returned.
panSysTimeZoneOffset
1.3.6.1.4.1.25461.2.1.2.1.4
Integer32
The offset in seconds from UTC of the system's time zone. Values are negative for locations west of UTC and positive for locations east of UTC.
panSysDaylightSaving
1.3.6.1.4.1.25461.2.1.2.1.5
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
Whether daylight savings are in currently in effect for the system's time zone.
panSysVpnClientVersion
1.3.6.1.4.1.25461.2.1.2.1.6
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
Currently installed VPN client package version. If package is not installed, 0.0.0 is returned.
panSysAppVersion
1.3.6.1.4.1.25461.2.1.2.1.7
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
Currently installed application definition version. If no application definition is found, 0 is returned.
panSysAvVersion
1.3.6.1.4.1.25461.2.1.2.1.8
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
Currently installed antivirus version. If no antivirus is found, 0 is returned.
panSysThreatVersion
1.3.6.1.4.1.25461.2.1.2.1.9
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
Currently installed threat definition version. If no threat definition is found, 0 is returned.
panSysUrlFilteringVersion
1.3.6.1.4.1.25461.2.1.2.1.10
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
Currently installed URL filtering version. If no URL filtering is installed, 0 is returned.
panSysHAState
1.3.6.1.4.1.25461.2.1.2.1.11
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
Current high-availability state.
panSysHAPeerState
1.3.6.1.4.1.25461.2.1.2.1.12
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
Current peer high-availability state.
panSysHAMode
1.3.6.1.4.1.25461.2.1.2.1.13
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
Current high-availability mode (disabled, active-passive, or active-active).
panSysUrlFilteringDatabase
1.3.6.1.4.1.25461.2.1.2.1.14
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
Current installed URL filtering database (surfcontrol, brightcloud, etc)
panSysGlobalProtectClientVersion
1.3.6.1.4.1.25461.2.1.2.1.15
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
Currently installed global-protect client package version. If package is not installed, 0.0.0 is returned.
panSysOpswatDatafileVersion
1.3.6.1.4.1.25461.2.1.2.1.16
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
Currently installed opswat database version. If package is not installed, 0 is returned.
panSysWildfireVersion
1.3.6.1.4.1.25461.2.1.2.1.17
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
Currently installed wildfire content version. If no wildfire content is found, 0 is returned.
panSysWildfirePrivateCloudVersion
1.3.6.1.4.1.25461.2.1.2.1.18
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
Currently installed wildfire private cloud content version. If no wpc is found, 0 is returned.
panAhoSw
1.3.6.1.4.1.25461.2.1.2.1.19.1
Counter64 (0..18446744073709551615)
The total usage of software for AHO
panDfaSw
1.3.6.1.4.1.25461.2.1.2.1.19.2
Counter64 (0..18446744073709551615)
The total number of dfa match using software
panFlowHostServiceAllow
1.3.6.1.4.1.25461.2.1.2.1.19.3
Counter64 (0..18446744073709551615)
Device management session allowed
panHaPathmonSent
1.3.6.1.4.1.25461.2.1.2.1.19.4
Counter64 (0..18446744073709551615)
HA path-monitoring packets sent
panAhoFpga
1.3.6.1.4.1.25461.2.1.2.1.19.5
Counter64 (0..18446744073709551615)
The total requests to FPGA for AHO
panDfaFpga
1.3.6.1.4.1.25461.2.1.2.1.19.6
Counter64 (0..18446744073709551615)
The total requests to FPGA for DFA
panFpgaPkt
1.3.6.1.4.1.25461.2.1.2.1.19.7
Counter64 (0..18446744073709551615)
The packets held because of requests to FPGA
panFlowDosAgMaxSessLimit
1.3.6.1.4.1.25461.2.1.2.1.19.8.1
Counter64 (0..18446744073709551615)
Session limit reached for aggregate profile, drop session
panFlowDosBlkNumEntries
1.3.6.1.4.1.25461.2.1.2.1.19.8.2
Counter64 (0..18446744073709551615)
Number of entries in DOS block table
panFlowDosClMaxSessLimit
1.3.6.1.4.1.25461.2.1.2.1.19.8.3
Counter64 (0..18446744073709551615)
Session limit reached for classified profile, drop session
panFlowDosClSyncookieAckErr
1.3.6.1.4.1.25461.2.1.2.1.19.8.4
Counter64 (0..18446744073709551615)
TCP SYN cookies: Invalid ACKs received, classified profile
panFlowDosClSyncookieAckRcv
1.3.6.1.4.1.25461.2.1.2.1.19.8.5
Counter64 (0..18446744073709551615)
TCP SYN cookies: ACKs to cookies received, classified profile
panFlowDosClSyncookieBlkDur
1.3.6.1.4.1.25461.2.1.2.1.19.8.6
Counter64 (0..18446744073709551615)
Packets dropped: Flagged for blocking and under block duration for cl
panFlowDosClSyncookieMax
1.3.6.1.4.1.25461.2.1.2.1.19.8.7
Counter64 (0..18446744073709551615)
Packet dropped: SYN cookies maximum threshold reached, classified pro
panFlowDosClSyncookieSent
1.3.6.1.4.1.25461.2.1.2.1.19.8.8
Counter64 (0..18446744073709551615)
TCP SYN cookies: cookies sent, classified profile
panFlowMeterVsysThrottle
1.3.6.1.4.1.25461.2.1.2.1.19.8.9
Counter64 (0..18446744073709551615)
Session metering: sessions throttled by vsys configuration
Packets dropped:Dropped by packet buffer protection RED
panFlowDosCurrSessIncrFailed
1.3.6.1.4.1.25461.2.1.2.1.19.8.75
Counter64 (0..18446744073709551615)
Unable to increment current session count on session create
panFlowDosCurrSessDecrFailed
1.3.6.1.4.1.25461.2.1.2.1.19.8.76
Counter64 (0..18446744073709551615)
Unable to decrement current session count on session delete
panFlowFwdL3TtlZero
1.3.6.1.4.1.25461.2.1.2.1.19.9.1
Counter64 (0..18446744073709551615)
Packets dropped: IP TTL reaches zero
panFlowMeterHostThrottle
1.3.6.1.4.1.25461.2.1.2.1.19.9.2
Counter64 (0..18446744073709551615)
Session metering: sessions throttled by management session threshold
panFlowHostServiceDeny
1.3.6.1.4.1.25461.2.1.2.1.19.9.3
Counter64 (0..18446744073709551615)
Device management session denied
panFlowHostServiceUnknown
1.3.6.1.4.1.25461.2.1.2.1.19.9.4
Counter64 (0..18446744073709551615)
Session discarded: unknown application to control plane
panPktAllocFailure
1.3.6.1.4.1.25461.2.1.2.1.19.9.5
Counter64 (0..18446744073709551615)
Packet allocation error
panPktAllocFailureCos
1.3.6.1.4.1.25461.2.1.2.1.19.9.6
Counter64 (0..18446744073709551615)
Packet allocation error due to QoS control
panSessionDiscard
1.3.6.1.4.1.25461.2.1.2.1.19.9.7
Counter64 (0..18446744073709551615)
Session set to discard by security policy check
panFlowIpfragFragErr
1.3.6.1.4.1.25461.2.1.2.1.19.10.1
Counter64 (0..18446744073709551615)
Packet dropped: IP fragmentation error
panFlowIpfragRecv
1.3.6.1.4.1.25461.2.1.2.1.19.10.2
Counter64 (0..18446744073709551615)
IP fragments received
panTcpAllocWqeFailed
1.3.6.1.4.1.25461.2.1.2.1.19.11.1
Counter64 (0..18446744073709551615)
wqe allocation failure in tcp
panTcpDeny
1.3.6.1.4.1.25461.2.1.2.1.19.11.2
Counter64 (0..18446744073709551615)
session denied because of failure in tcp reassembly
panTcpDropOutOfWnd
1.3.6.1.4.1.25461.2.1.2.1.19.11.3
Counter64 (0..18446744073709551615)
out-of-window packets dropped
panTcpDropPacket
1.3.6.1.4.1.25461.2.1.2.1.19.11.4
Counter64 (0..18446744073709551615)
packets dropped because of failure in tcp reassembly
panFlowActionClose
1.3.6.1.4.1.25461.2.1.2.1.19.11.5
Counter64 (0..18446744073709551615)
TCP sessions closed via injecting RST
panFlowActionReset
1.3.6.1.4.1.25461.2.1.2.1.19.11.6
Counter64 (0..18446744073709551615)
TCP clients reset via responding RST
panFlowTcpNonSyn
1.3.6.1.4.1.25461.2.1.2.1.19.11.7
Counter64 (0..18446744073709551615)
Non-SYN TCP packets without session match
panTcpExceedSegLimit
1.3.6.1.4.1.25461.2.1.2.1.19.11.8
Counter64 (0..18446744073709551615)
packets dropped due to the limitation on global tcp out-of-order pack
panFlowTciGreDecapSuccess
1.3.6.1.4.1.25461.2.1.2.1.19.12.1
Counter64 (0..18446744073709551615)
Total GRE sessions tunnel inspected
panFlowTciGreDecapFailed
1.3.6.1.4.1.25461.2.1.2.1.19.12.2
Counter64 (0..18446744073709551615)
Total GRE sessions for failed tunnel inspected
panFlowTciGreDecapUnknown
1.3.6.1.4.1.25461.2.1.2.1.19.12.3
Counter64 (0..18446744073709551615)
Total unknown tunnel inspection packets in GRE tunnel [passed|dropped]
panFlowTciIpsecDecapSuccess
1.3.6.1.4.1.25461.2.1.2.1.19.12.4
Counter64 (0..18446744073709551615)
Total Ipsec sessions tunnel inspected
panFlowTciIpsecDecapFailed
1.3.6.1.4.1.25461.2.1.2.1.19.12.5
Counter64 (0..18446744073709551615)
Total IPSEC sessions for failed tunnel inspected
panFlowTciIpsecDecapUnknown
1.3.6.1.4.1.25461.2.1.2.1.19.12.6
Counter64 (0..18446744073709551615)
Total unknown tunnel inspection packets in IPSEC tunnel [passed|dropped]
panFlowTciGtpDecapSuccess
1.3.6.1.4.1.25461.2.1.2.1.19.12.7
Counter64 (0..18446744073709551615)
Total GTP sessions tunnel inspected
panFlowTciGtpDecapFailed
1.3.6.1.4.1.25461.2.1.2.1.19.12.8
Counter64 (0..18446744073709551615)
Total GTP sessions for failed tunnel inspected
panFlowTciGtpDecapUnknown
1.3.6.1.4.1.25461.2.1.2.1.19.12.9
Counter64 (0..18446744073709551615)
Total unknown tunnel inspection packets in GTP tunnel[passed|dropped]
panSysAppReleaseDate
1.3.6.1.4.1.25461.2.1.2.1.20
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
Currently installed application definition release date. If no release date is found, unknown is returned.
panSysThreatReleaseDate
1.3.6.1.4.1.25461.2.1.2.1.21
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
Currently installed threat release date. If no release date is found, unknown is returned.
panSysAvReleaseDate
1.3.6.1.4.1.25461.2.1.2.1.22
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
Currently installed antivirus release date. If no release date is found, unknown is returned.
panSysWfReleaseDate
1.3.6.1.4.1.25461.2.1.2.1.23
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
Currently installed WildFire release date. If no release date is found, unknown is returned.
panChassisType
1.3.6.1.4.1.25461.2.1.2.2.1
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
Chassis type for this Palo Alto device.
panMSeriesMode
1.3.6.1.4.1.25461.2.1.2.2.2
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
Series Mode for this Palo Alto device.
panSessionUtilization
1.3.6.1.4.1.25461.2.1.2.3.1
Integer32
Session table utilization percentage. Values should be between 0 and 100.
panSessionMax
1.3.6.1.4.1.25461.2.1.2.3.2
Integer32
Total number of sessions supported.
panSessionActive
1.3.6.1.4.1.25461.2.1.2.3.3
Integer32
Total number of active sessions.
panSessionActiveTcp
1.3.6.1.4.1.25461.2.1.2.3.4
Integer32
Total number of active TCP sessions.
panSessionActiveUdp
1.3.6.1.4.1.25461.2.1.2.3.5
Integer32
Total number of active UDP sessions.
panSessionActiveICMP
1.3.6.1.4.1.25461.2.1.2.3.6
Integer32
Total number of active ICMP sessions.
panSessionActiveSslProxy
1.3.6.1.4.1.25461.2.1.2.3.7
Integer32
Total number of active SSL proxy sessions.
panSessionSslProxyUtilization
1.3.6.1.4.1.25461.2.1.2.3.8
Integer32
SSL proxy Session utilization percentage. Values should be between 0 and 100.
panSessionCps
1.3.6.1.4.1.25461.2.1.2.3.12
Integer32
Total number of sessions per second (includes TCP, UDP, ICMP and other protocols).
panMgmtPanoramaConnected
1.3.6.1.4.1.25461.2.1.2.4.1
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
Current Connection status to Panorama Server (connected, not-connected)
panMgmtPanorama2Connected
1.3.6.1.4.1.25461.2.1.2.4.2
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
Current Connection status to Panorama2 Server (connected, not-connected)
panMgmtNumAdminSessions
1.3.6.1.4.1.25461.2.1.2.4.3
Integer32
Number of admin sessions currently active.
panGPGWUtilizationPct
1.3.6.1.4.1.25461.2.1.2.5.1.1
Integer32
GlobalProtect Gateway utilization percentage
panGPGWUtilizationMaxTunnels
1.3.6.1.4.1.25461.2.1.2.5.1.2
Integer32
Max tunnels allowed
panGPGWUtilizationActiveTunnels
1.3.6.1.4.1.25461.2.1.2.5.1.3
Integer32
Number of active tunnels
panLcLogRate
1.3.6.1.4.1.25461.2.1.2.6.1.1
Unsigned32
The write rate in logs/s on the Log Collection
panLcLogDurationTraffic
1.3.6.1.4.1.25461.2.1.2.6.1.2.1
Unsigned32
The Log duration (in days) for the traffic logs on the Log Collector
panLcLogDurationConfig
1.3.6.1.4.1.25461.2.1.2.6.1.2.2
Unsigned32
The Log duration (in days) for the config logs on the Log Collector
panLcLogDurationSystem
1.3.6.1.4.1.25461.2.1.2.6.1.2.3
Unsigned32
The Log duration (in days) for the system logs on the Log Collector
panLcLogDurationThreat
1.3.6.1.4.1.25461.2.1.2.6.1.2.4
Unsigned32
The Log duration (in days) for the threat logs on the Log Collector
panLcLogDurationAppstat
1.3.6.1.4.1.25461.2.1.2.6.1.2.5
Unsigned32
The Log duration (in days) for the appstat logs on the Log Collector
panLcLogDurationTrsum
1.3.6.1.4.1.25461.2.1.2.6.1.2.6
Unsigned32
The Log duration (in days) for the trsum logs on the Log Collector
panLcLogDurationThsum
1.3.6.1.4.1.25461.2.1.2.6.1.2.7
Unsigned32
The Log duration (in days) for the thsum logs on the Log Collector
panLcLogDurationEvent
1.3.6.1.4.1.25461.2.1.2.6.1.2.8
Unsigned32
The Log duration (in days) for the event logs on the Log Collector
panLcLogDurationAlarm
1.3.6.1.4.1.25461.2.1.2.6.1.2.9
Unsigned32
The Log duration (in days) for the alarm logs on the Log Collector
panLcLogDurationHipmatch
1.3.6.1.4.1.25461.2.1.2.6.1.2.10
Unsigned32
The Log duration (in days) for the hipmatch logs on the Log Collector
panLcLogDurationUserid
1.3.6.1.4.1.25461.2.1.2.6.1.2.11
Unsigned32
The Log duration (in days) for the userid logs on the Log Collector
panLcIsRedundancyMember
1.3.6.1.4.1.25461.2.1.2.6.2
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
True value indicates this Log Collector is part of a Collector Group with Redundancy is enabled
panDeviceIncomingLogRate
1.3.6.1.4.1.25461.2.1.2.7.1.1
Unsigned32
The incoming rate in logs/s on the Device.
panDeviceWriteLogRate
1.3.6.1.4.1.25461.2.1.2.7.1.2
Unsigned32
The write rate in logs/s on the Device.
panDeviceLoggingExtFwdCount
1.3.6.1.4.1.25461.2.1.2.7.4.1
Counter64 (0..18446744073709551615)
Total count for logs forwarded.
panDeviceLoggingExtFwdQueueDrop
1.3.6.1.4.1.25461.2.1.2.7.4.2
Counter64 (0..18446744073709551615)
Counter for logs dropped due to queue being full.
panDeviceLoggingExtFwdStatsSendErr
1.3.6.1.4.1.25461.2.1.2.7.4.3
Counter64 (0..18446744073709551615)
Counter for logs discarded due to sending error.
panhrMemorySize
1.3.6.1.4.1.25461.2.1.2.12.2
KBytesStorage size, expressed in units of 1024 bytes. (0..2147483647) · Integer32 · KBytes
The amount of physical read-write main memory, typically RAM, contained by the host.
panPAClusterSummaryEntryNodeid
1.3.6.1.4.1.25461.2.1.2.13.1
Integer32
panPAClusterSummaryEntryNodeid cluster summary node id .Values should be between 0 and 100.
panPAClusterSummaryEntrymode
1.3.6.1.4.1.25461.2.1.2.13.2
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
panPAClusterSummaryEntrySerialNumber serial number.
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
String that provides a textual description of the event.
Table details
panVsysTable
1.3.6.1.4.1.25461.2.1.2.3.9
Index: panVsysId
VSYS table
panVsysId
1.3.6.1.4.1.25461.2.1.2.3.9.1.1
Integer32
Vsys id
panVsysName
1.3.6.1.4.1.25461.2.1.2.3.9.1.2
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
User assigned vsys name (empty string if not available)
panVsysSessionUtilizationPct
1.3.6.1.4.1.25461.2.1.2.3.9.1.3
Integer32
Vsys utilization percentage, if session limit is configured. If session limit is not configured, this value is '0'
panVsysActiveSessions
1.3.6.1.4.1.25461.2.1.2.3.9.1.4
Integer32
Active sessions on this Vsys
panVsysMaxSessions
1.3.6.1.4.1.25461.2.1.2.3.9.1.5
Integer32
Max sessions on this Vsys, if session limit is configured. If session limit is not configured, this value is '0'
panVsysActiveTcpCps
1.3.6.1.4.1.25461.2.1.2.3.9.1.6
Integer32
Number of active Tcp Connections per second for thie vSys.
panVsysActiveUdpCps
1.3.6.1.4.1.25461.2.1.2.3.9.1.7
Integer32
Number of active Udp Connections per second for thie vSys.
panVsysActiveOtherIpCps
1.3.6.1.4.1.25461.2.1.2.3.9.1.8
Integer32
Number of active Other IP Connections per second for thie vSys.
panVsysTotalCps
1.3.6.1.4.1.25461.2.1.2.3.9.1.9
Integer32
Total Number of CPS Connections per second.
panZoneTable
1.3.6.1.4.1.25461.2.1.2.3.10
Index: panZoneName · panVsysId
Sub-tree for the current active connectionsPerSecond (CPS) values for each zone present.
panZoneName
1.3.6.1.4.1.25461.2.1.2.3.10.1.1
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
Zone name for the interface
panZoneActiveTcpCps
1.3.6.1.4.1.25461.2.1.2.3.10.1.2
Unsigned32
Number of active TCP connections per second for this zone.
panZoneActiveUdpCps
1.3.6.1.4.1.25461.2.1.2.3.10.1.3
Unsigned32
Number of active UDP connections per second for this zone.
panZoneActiveOtherIpCps
1.3.6.1.4.1.25461.2.1.2.3.10.1.4
Unsigned32
Number of active Other IP connections per second for this zone.
panIfTable
1.3.6.1.4.1.25461.2.1.2.3.11
Index: panIfIndex
Sub-tree for the current active connectionsPerSecond (CPS) values for each interface present.
panIfIndex
1.3.6.1.4.1.25461.2.1.2.3.11.1.1
Unsigned32
Index of the interface
panIfDescr
1.3.6.1.4.1.25461.2.1.2.3.11.1.2
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
Description (name) of the interface
panIfActiveTcpCps
1.3.6.1.4.1.25461.2.1.2.3.11.1.3
Unsigned32
Number of active TCP connections per second for this interface.
panIfActiveUdpCps
1.3.6.1.4.1.25461.2.1.2.3.11.1.4
Unsigned32
Number of active UDP connections per second for this interface.
panIfActiveOtherIpCps
1.3.6.1.4.1.25461.2.1.2.3.11.1.5
Unsigned32
Number of active Other IP connections per second for this interface.
This variable uniquely identifies the group containing the port to which a power Ethernet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for non-modular devices. Furthermore, the same value MUST be used in this variable, pethMainPseGroupIndex, and pethNotificationControlGroupIndex to refer to a given box in a stack or module in the rack.
pethPsePortIndex
Integer32 (1..2147483647)
This variable uniquely identifies the power Ethernet PSE port within group pethPsePortGroupIndex to which the power Ethernet PSE entry is connected.
Sub-tree for the Log Disk Usage on the Log Collector. Log Disk Usage is available as MB in use.
panLcDiskUsageId
1.3.6.1.4.1.25461.2.1.2.6.1.3.1.1
Integer32
The Log disk id
panLcDiskUsage
1.3.6.1.4.1.25461.2.1.2.6.1.3.1.2
Unsigned32
The Log disk usage on the Log Collector
panLcLogUsageTable
1.3.6.1.4.1.25461.2.1.2.6.1.4
Index: panLcLogType
Sub-tree for the Log Usage and data retention on the Log Collector(non localDB). Log Disk Usage is available as MB in use.
panLcLogType
1.3.6.1.4.1.25461.2.1.2.6.1.4.1.1
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
Log type for Log Collector.
panLcDiskUsageDiskSpacePct
1.3.6.1.4.1.25461.2.1.2.6.1.4.1.2
FloatValueThis data type is used to represent Float values. SIZE (0..64) · OCTET STRING · hint d-2
Disk Usage Percentage for particular log type for Log Collector aggregated over all disks.
panLcDiskUsageRetention
1.3.6.1.4.1.25461.2.1.2.6.1.4.1.3
Unsigned32
Log Rentention for particular log type for Log Collector.
panLcDiskQuotaPct
1.3.6.1.4.1.25461.2.1.2.6.1.4.1.4
FloatValueThis data type is used to represent Float values. SIZE (0..64) · OCTET STRING · hint d-2
Disk Quota Percentage for particular log type for Log Collector aggregated over all disks.
panLocalLogUsageTable
1.3.6.1.4.1.25461.2.1.2.6.1.5
Index: panLcLogType
Sub-tree for the Log Usage and data retention on the Log Collector(localDB). Log Disk Usage is available as MB in use.
panLocalLogType
1.3.6.1.4.1.25461.2.1.2.6.1.5.1.1
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
Log type for Log Collector.
panLocalDiskUsageDiskSpace
1.3.6.1.4.1.25461.2.1.2.6.1.5.1.2
FloatValueThis data type is used to represent Float values. SIZE (0..64) · OCTET STRING · hint d-2
Disk Usage (in MB) for particular log type for Log Collector.
panLocalDiskUsageRetention
1.3.6.1.4.1.25461.2.1.2.6.1.5.1.3
Unsigned32
Log Rentention for particular log type for Log Collector.
panLocalDiskQuota
1.3.6.1.4.1.25461.2.1.2.6.1.5.1.4
FloatValueThis data type is used to represent Float values. SIZE (0..64) · OCTET STRING · hint d-2
Disk Quota (in MB) for particular log type for Log Collector.
panLocalDiskQuotaPct
1.3.6.1.4.1.25461.2.1.2.6.1.5.1.5
FloatValueThis data type is used to represent Float values. SIZE (0..64) · OCTET STRING · hint d-2
Disk Quota Percentage for particular log type for Log Collector.
panLcDiskIOPSTable
1.3.6.1.4.1.25461.2.1.2.6.1.6
Index: panLcDiskIOPSId
Sub-tree for Log Disk I/O throughput on the Log Collector and Panorama.
panLcDiskIOPSId
1.3.6.1.4.1.25461.2.1.2.6.1.6.1.1
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
Disk number for Log Collector or Panorama.
panLcDiskIORead5min
1.3.6.1.4.1.25461.2.1.2.6.1.6.1.2
Counter64 (0..18446744073709551615)
Disk read rate over a span of 5 minute interval.
panLcDiskIOWrite5min
1.3.6.1.4.1.25461.2.1.2.6.1.6.1.3
Counter64 (0..18446744073709551615)
Disk write rate over a span of 5 minute interval.
panLcLogFwdStatsTable
1.3.6.1.4.1.25461.2.1.2.6.3
Index: panLcLogFwdStatsTableType
This table shows the status of logs as they are forwarded via syslog, Traps, email and http/https from this Log Collector.
panLcLogFwdStatsTableType
1.3.6.1.4.1.25461.2.1.2.6.3.1.1
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
Name of method used to forward logs.
panLcLogFwdStatsTableEnqueueCount
1.3.6.1.4.1.25461.2.1.2.6.3.1.2
Counter64 (0..18446744073709551615)
Counter for number of logs enqueued.
panLcLogFwdStatsTableSendCount
1.3.6.1.4.1.25461.2.1.2.6.3.1.3
Counter64 (0..18446744073709551615)
Counter for number of logs sent.
panLcLogFwdStatsTableDropCount
1.3.6.1.4.1.25461.2.1.2.6.3.1.4
Counter64 (0..18446744073709551615)
Counter for number of logs dropped.
panLcLogFwdStatsTableQueueDepth
1.3.6.1.4.1.25461.2.1.2.6.3.1.5
Counter64 (0..18446744073709551615)
Counter for depth of queue.
panLcLoggingConnectedDeviceTable
1.3.6.1.4.1.25461.2.1.2.6.4
Index: panLcLoggingConnectedDeviceConnectionId
This table shows the details of all devices logging to this Log Collector.
panLcLoggingConnectedDeviceName
1.3.6.1.4.1.25461.2.1.2.6.4.1.1
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
Name of the device being polled.
panLcLoggingConnectedDeviceConnectionId
1.3.6.1.4.1.25461.2.1.2.6.4.1.2
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
This table shows the details of logs forwarded by devices logging to this Log Collector.
panLcLoggingDeviceConnectionId
1.3.6.1.4.1.25461.2.1.2.6.5.1.1
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
Connection id of the device being polled.
panLcLoggingLogType
1.3.6.1.4.1.25461.2.1.2.6.5.1.2
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
Log Type of the log being polled.
panLcLogTypeLastLogRecd
1.3.6.1.4.1.25461.2.1.2.6.5.1.3
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
Time at which the last log was received.
panLcLogTypeLastSeqNumRecd
1.3.6.1.4.1.25461.2.1.2.6.5.1.4
Counter64 (0..18446744073709551615)
Last sequence number received for a type of log.
panLcLogTypeLastLogGen
1.3.6.1.4.1.25461.2.1.2.6.5.1.5
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
Sub-tree for the statistics for different log types on the Device.
panDeviceLoggingDevice
1.3.6.1.4.1.25461.2.1.2.7.2.1.1
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
Device Information (Name or Serial Number).
panDeviceLoggingDeviceIndex
1.3.6.1.4.1.25461.2.1.2.7.2.1.2
Integer32
Index as mentioned in panDeviceLoggingCollectorConnection table.
panDeviceLoggingLogType
1.3.6.1.4.1.25461.2.1.2.7.2.1.3
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
Type of log.
panDeviceLoggingLogLastLogCreated
1.3.6.1.4.1.25461.2.1.2.7.2.1.4
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
Time of the last log creation.
panDeviceLoggingLogLastLogFwded
1.3.6.1.4.1.25461.2.1.2.7.2.1.5
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
Time at which last log was forwarded.
panDeviceLoggingLogLastSeqNumberFwded
1.3.6.1.4.1.25461.2.1.2.7.2.1.6
Counter64 (0..18446744073709551615)
Sequence number of the last log that was forwarded.
panDeviceLoggingLogLastSeqNumberAck
1.3.6.1.4.1.25461.2.1.2.7.2.1.7
Counter64 (0..18446744073709551615)
Sequence number of the last log that was acknowledged.
panDeviceLoggingLogTotalLogsFwded
1.3.6.1.4.1.25461.2.1.2.7.2.1.8
Counter64 (0..18446744073709551615)
Total number of logs forwarded.
panDeviceLoggingLogUsageTable
1.3.6.1.4.1.25461.2.1.2.7.3
Index: panDeviceLoggingLogUsageLogType
Sub-tree for Log Usage and days retained for different log types on the Device. Log Disk Usage is avaiable as MB (in use).
panDeviceLoggingLogUsageLogType
1.3.6.1.4.1.25461.2.1.2.7.3.1.1
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
Log type for Device.
panDeviceLoggingDiskUsageDiskSpace
1.3.6.1.4.1.25461.2.1.2.7.3.1.2
FloatValueThis data type is used to represent Float values. SIZE (0..64) · OCTET STRING · hint d-2
Disk Usage (MB) for particular log type for Device.
panDeviceLoggingDiskUsageRetention
1.3.6.1.4.1.25461.2.1.2.7.3.1.3
Unsigned32
Log Rentention for particular log type for Device.
panDeviceLoggingDiskQuotaPct
1.3.6.1.4.1.25461.2.1.2.7.3.1.4
FloatValueThis data type is used to represent Float values. SIZE (0..64) · OCTET STRING · hint d-2
Disk Quota percentage for particular log type for Device.
panDeviceLoggingDiskQuota
1.3.6.1.4.1.25461.2.1.2.7.3.1.5
FloatValueThis data type is used to represent Float values. SIZE (0..64) · OCTET STRING · hint d-2
Disk Quota for particular log type for Device.
panDeviceLoggingExtFwdStatsTable
1.3.6.1.4.1.25461.2.1.2.7.4.4
Index: panDeviceLoggingExtFwdStatsTableType
This table shows the status of logs as they are forwarded via syslog, Traps, email and http/https from this Device.
panDeviceLoggingExtFwdStatsTableType
1.3.6.1.4.1.25461.2.1.2.7.4.4.1.1
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
Name of method used to forward logs.
panDeviceLoggingExtFwdStatsTableEnqueueCount
1.3.6.1.4.1.25461.2.1.2.7.4.4.1.2
Counter64 (0..18446744073709551615)
Counter for number of logs enqueued.
panDeviceLoggingExtFwdStatsTableSendCount
1.3.6.1.4.1.25461.2.1.2.7.4.4.1.3
Counter64 (0..18446744073709551615)
Counter for number of logs sent.
panDeviceLoggingExtFwdStatsTableDropCount
1.3.6.1.4.1.25461.2.1.2.7.4.4.1.4
Counter64 (0..18446744073709551615)
Counter for number of logs dropped.
panDeviceLoggingExtFwdStatsTableQueueDepth
1.3.6.1.4.1.25461.2.1.2.7.4.4.1.5
Counter64 (0..18446744073709551615)
Counter for depth of queue.
panDeviceLoggingExtFwdStatsTable1minAvgSendRate
1.3.6.1.4.1.25461.2.1.2.7.4.4.1.6
Unsigned32
Counter for average send rate over 1 minute interval.
panDeviceLoggingCollectorConnectionTable
1.3.6.1.4.1.25461.2.1.2.7.5
Index: panDeviceLoggingCollectorConnectionIP
Sub-tree for tracking various log collection entities connected to device.
panDeviceLoggingCollectorConnectionType
1.3.6.1.4.1.25461.2.1.2.7.5.1.1
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
Type of log collection entity (CMS/LC).
panDeviceLoggingCollectorConnectionIP
1.3.6.1.4.1.25461.2.1.2.7.5.1.2
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
IP of log collection entity (CMS/LC) for non-7K and Gryphon. Will display connection ID for 7K and Gryphon.
panDeviceLoggingCollectorConnectionHostname
1.3.6.1.4.1.25461.2.1.2.7.5.1.3
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
Hostname of log collection entity (CMS/LC).
panDeviceLoggingCollectorConnectionStatus
1.3.6.1.4.1.25461.2.1.2.7.5.1.4
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
Connection status of log collection entity (CMS/LC).
panPacketBrokerStatsTable
1.3.6.1.4.1.25461.2.1.2.8.1
Index: index
Sub-tree for capturing ssl broker statistics and status.
chainName
1.3.6.1.4.1.25461.2.1.2.8.1.1.2
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
Name of ssl broker chain object
avgLatency
1.3.6.1.4.1.25461.2.1.2.8.1.1.3
Integer32
Average latency value
sessionCount
1.3.6.1.4.1.25461.2.1.2.8.1.1.4
Integer32
Number of active sessions
panHAClusterLocalSessStatsTable
1.3.6.1.4.1.25461.2.1.2.9.1
Index: index
Sub-tree for capturing HA cluster session data that is local to the firewall.
cacheCurrentTotal
1.3.6.1.4.1.25461.2.1.2.9.1.1.3
Unsigned32
The total number of cluster sessions in the firewall's cluster cache. This includes current sessions from all the remote firewalls in the cluster plus the local firewall's current sessions that are sent to the remote firewalls.
cacheMax
1.3.6.1.4.1.25461.2.1.2.9.1.1.4
Unsigned32
The maximum number of sessions the firewall's cluster cache can support.
tableActive
1.3.6.1.4.1.25461.2.1.2.9.1.1.5
Unsigned32
The number of active sessions in the firewall's local table.
tableMax
1.3.6.1.4.1.25461.2.1.2.9.1.1.6
Unsigned32
The maximum number of sessions the firewall's local table can support.
panHAClusterSessStatsTable
1.3.6.1.4.1.25461.2.1.2.9.2
Index: index
Sub-tree for capturing HA cluster session data learnt from the remote firewalls in the HA cluster.
serialNumber
1.3.6.1.4.1.25461.2.1.2.9.2.1.2
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The serial number of the firewall.
cacheCurrent
1.3.6.1.4.1.25461.2.1.2.9.2.1.3
Unsigned32
The numnber of current sessions from the remote firewall.
cacheAccumulated
1.3.6.1.4.1.25461.2.1.2.9.2.1.4
Unsigned32
The number of accumulated sessions from the remote firewall since local firewall startup.
cacheCurrentPromoted
1.3.6.1.4.1.25461.2.1.2.9.2.1.5
Unsigned32
The number of current sessions from the remote firewall that have been promoted to the local session table.
promotedAccumulated
1.3.6.1.4.1.25461.2.1.2.9.2.1.6
Unsigned32
The number of accumulated sessions from the remote firewall that have been promoted to the local session table since local firewall startup.
panWFMonitorQStatusTable
1.3.6.1.4.1.25461.2.1.2.10.1
Index: index
Sub-tree for capturing Wildfire monitoring queue status statistics.
archiveCount
1.3.6.1.4.1.25461.2.1.2.10.1.1.3
Unsigned32
Number of Wildfire monitoring files archived
docCount
1.3.6.1.4.1.25461.2.1.2.10.1.1.4
Unsigned32
Number of Wildfire monitoring documents
elinkCount
1.3.6.1.4.1.25461.2.1.2.10.1.1.5
Unsigned32
Number of Wildfire monitoring email link dynamic analyses
portExecCount
1.3.6.1.4.1.25461.2.1.2.10.1.1.6
Unsigned32
Number of Wildfire monitoring portable executables
urlUploadFileCount
1.3.6.1.4.1.25461.2.1.2.10.1.1.7
Unsigned32
Number of Wildfire monitoring URL upload files
panWFMonitorArchiveUtilizationTable
1.3.6.1.4.1.25461.2.1.2.10.2
Index: index
Sub-tree for capturing Wildfire monitoring archive utilization statistics.
panWFMonitorDocUtilizationTable
1.3.6.1.4.1.25461.2.1.2.10.3
Index: index
Sub-tree for capturing Wildfire monitoring document utilization statistics.
panWFMonitorElinkUtilizationTable
1.3.6.1.4.1.25461.2.1.2.10.4
Index: index
Sub-tree for capturing Wildfire monitoring email link analysis utilization statistics.
panWFMonitorPortableExecUtilizationTable
1.3.6.1.4.1.25461.2.1.2.10.5
Index: index
Sub-tree for capturing Wildfire monitoring portable executable utilization statistics.
index
1.3.6.1.4.1.25461.2.1.2.10.5.1.1
Integer32
Index of the ssl broker stats entry
name
1.3.6.1.4.1.25461.2.1.2.10.5.1.2
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
Name of Wildfire monitoring queue status entry
available
1.3.6.1.4.1.25461.2.1.2.10.5.1.3
Unsigned32
Number of Wildfire monitoring available archived files
inUse
1.3.6.1.4.1.25461.2.1.2.10.5.1.4
Unsigned32
Number of Wildfire monitoring archived files in use
panhrStorageTable
1.3.6.1.4.1.25461.2.1.2.12.3
Index: panhrStorageIndex
The (conceptual) table of logical storage areas on the host.
panhrStorageIndex
1.3.6.1.4.1.25461.2.1.2.12.3.1.1
Integer32 (1..2147483647)
A unique value for each logical storage area contained by the host.
panhrStorageType
1.3.6.1.4.1.25461.2.1.2.12.3.1.2
AutonomousTypeRepresents an independently extensible type identification value. It may, for example, indicate a particular sub-tree with further MIB definitions, or define a particular type of protocol or hardware. · OBJECT IDENTIFIER
The type of storage represented by this entry.
panhrStorageDescr
1.3.6.1.4.1.25461.2.1.2.12.3.1.3
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
A description of the type and instance of the storage described by this entry.
panhrStorageAllocationUnits
1.3.6.1.4.1.25461.2.1.2.12.3.1.4
Integer32 (1..2147483647) · Bytes
The size, in bytes, of the data objects allocated from this pool. If this entry is monitoring sectors, blocks, buffers, or packets, for example, this number will commonly be greater than one. Otherwise this number will typically be one.
panhrStorageSize
1.3.6.1.4.1.25461.2.1.2.12.3.1.5
Integer32 (0..2147483647)
The size of the storage represented by this entry, in units of panhrStorageAllocationUnits. This object is writable to allow remote configuration of the size of the storage area in those cases where such an operation makes sense and is possible on the underlying system. For example, the amount of main memory allocated to a buffer pool might be modified or the amount of disk space allocated to virtual memory might be modified.
panhrStorageUsed
1.3.6.1.4.1.25461.2.1.2.12.3.1.6
Integer32 (0..2147483647)
The amount of the storage represented by this entry that is allocated, in units of panhrStorageAllocationUnits.
panhrStorageAvailable
1.3.6.1.4.1.25461.2.1.2.12.3.1.7
Integer32 (0..2147483647)
The amount of the storage represented by this entry that is allocated, in units of panhrStorageAllocationUnits.
panhrStorageAllocationFailures
1.3.6.1.4.1.25461.2.1.2.12.3.1.8
Counter32
The number of requests for storage represented by this entry that could not be honored due to not enough storage. It should be noted that as this object has a SYNTAX of Counter32, that it does not have a defined initial value. However, it is recommended that this object be initialized to zero, even though management stations must not depend on such an initialization.
panhrStorageUsage
1.3.6.1.4.1.25461.2.1.2.12.3.1.9
Integer32 (0..100) · %
The usage of the storage represented by this entry that is used, in units of percentage.
panInterfaceUtilizationTable
1.3.6.1.4.1.25461.2.1.2.14.1
Index: ifIndex
Sub-tree for capturing interface bandwidth utilization for counters from ifTable and ifXTable.
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
ifIndexRef
1.3.6.1.4.1.25461.2.1.2.14.1.1.1
Integer32
Index referring to ifmib table.
ifName
1.3.6.1.4.1.25461.2.1.2.14.1.1.2
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
Interface Name
ifInOctetsUtilization
1.3.6.1.4.1.25461.2.1.2.14.1.1.3
Counter32
Interface bandwidth utilization for ifInOctets in bytes/second
ifInUcastPktsUtilization
1.3.6.1.4.1.25461.2.1.2.14.1.1.4
Counter32
Interface bandwidth utilization for ifInUcastPkts in packets/second
ifOutOctetsUtilization
1.3.6.1.4.1.25461.2.1.2.14.1.1.5
Counter32
Interface bandwidth utilization for ifOutOctets in bytes/second
ifOutUcastPktsUtilization
1.3.6.1.4.1.25461.2.1.2.14.1.1.6
Counter32
Interface bandwidth utilization for ifOutUcastPkts in packets/second
ifInMulticastPktsUtilization
1.3.6.1.4.1.25461.2.1.2.14.1.1.7
Counter32
Interface bandwidth utilization for ifInMulticastPkts in packets/second
ifInBroadcastPktsUtilization
1.3.6.1.4.1.25461.2.1.2.14.1.1.8
Counter32
Interface bandwidth utilization for ifInBroadcastPkts in packets/second
ifOutMulticastPktsUtilization
1.3.6.1.4.1.25461.2.1.2.14.1.1.9
Counter32
Interface bandwidth utilization for ifOutMulticastPkts in packets/second
ifOutBroadcastPktsUtilization
1.3.6.1.4.1.25461.2.1.2.14.1.1.10
Counter32
Interface bandwidth utilization for ifOutBroadcastPkts in packets/second
ifHCInOctetsUtilization
1.3.6.1.4.1.25461.2.1.2.14.1.1.11
Counter64 (0..18446744073709551615)
Interface bandwidth utilization for ifHCInOctets in bytes/second
ifHCInUcastPktsUtilization
1.3.6.1.4.1.25461.2.1.2.14.1.1.12
Counter64 (0..18446744073709551615)
Interface bandwidth utilization for ifHCInUcastPkts in packets/second
ifHCOutOctetsUtilization
1.3.6.1.4.1.25461.2.1.2.14.1.1.13
Counter64 (0..18446744073709551615)
Interface bandwidth utilization for ifHCOutOctets in bytes/second
ifHCOutUcastPktsUtilization
1.3.6.1.4.1.25461.2.1.2.14.1.1.14
Counter64 (0..18446744073709551615)
Interface bandwidth utilization for ifHCOutUcastPkts in packets/second
ifHCInMulticastPktsUtilization
1.3.6.1.4.1.25461.2.1.2.14.1.1.15
Counter64 (0..18446744073709551615)
Interface bandwidth utilization for ifHCInMulticastPkts in packets/second
ifHCInBroadcastPktsUtilization
1.3.6.1.4.1.25461.2.1.2.14.1.1.16
Counter64 (0..18446744073709551615)
Interface bandwidth utilization for ifHCInBroadcastPkts in packets/second
ifHCOutMulticastPktsUtilization
1.3.6.1.4.1.25461.2.1.2.14.1.1.17
Counter64 (0..18446744073709551615)
Interface bandwidth utilization for ifHCOutMulticastPkts in packets/second
ifHCOutBroadcastPktsUtilization
1.3.6.1.4.1.25461.2.1.2.14.1.1.18
Counter64 (0..18446744073709551615)
Interface bandwidth utilization for ifHCOutBroadcastPkts in packets/second
Trap details
panCommonEventLog
1.3.6.1.4.1.25461.2.1.3.2.0.1
A config/system/firewall/threat log
panCommonEventDescr
1.3.6.1.4.1.25461.2.1.3.1.1
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
String that provides a textual description of the event.