InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
pppLinkStatusPhysicalIndex
1.3.6.1.2.1.10.23.1.1.1.1.1
Integer32 (0..2147483647)
The value of ifIndex that identifies the lower-level interface over which this PPP Link is operating. This interface would usually be n HDLC or RS-232 type of interface. If there is no lower-layer interface element, or there is no ifEntry for the element, or the element can not be identified, then the value of this object is 0. For example, suppose that PPP is operating over a serial port. This would use two entries in the ifTable. The PPP could be running over `interface' number 123 and the serial port could be running over `interface' number 987. Therefore, ifSpecific.123 would contain the OBJECT IDENTIFIER ppp pppLinkStatusPhysicalIndex.123 would contain 987, and ifSpecific.987 would contain the OBJECT IDENTIFIER for the serial-port's media-specific MIB.
pppLinkStatusBadAddresses
1.3.6.1.2.1.10.23.1.1.1.1.2
Counter32
Reference: Section 3.1, Address Field, of RFC1331.
The number of packets received with an incorrect Address Field. This counter is a component of the ifInErrors variable that is associated with the interface that represents this PPP Link.
pppLinkStatusBadControls
1.3.6.1.2.1.10.23.1.1.1.1.3
Counter32
Reference: Section 3.1, Control Field, of RFC1331.
The number of packets received on this link with an incorrect Control Field. This counter is a component of the ifInErrors variable that is associated with the interface that represents this PPP Link.
pppLinkStatusPacketTooLongs
1.3.6.1.2.1.10.23.1.1.1.1.4
Counter32
The number of received packets that have been discarded because their length exceeded the MRU. This counter is a component of the ifInErrors variable that is associated with the interface that represents this PPP Link. NOTE, packets which are longer than the MRU but which are successfully received and processed are NOT included in this count.
pppLinkStatusBadFCSs
1.3.6.1.2.1.10.23.1.1.1.1.5
Counter32
The number of received packets that have been discarded due to having an incorrect FCS. This counter is a component of the ifInErrors variable that is associated with the interface that represents this PPP Link.
pppLinkStatusLocalMRU
1.3.6.1.2.1.10.23.1.1.1.1.6
Integer32 (1..2147483647)
The current value of the MRU for the local PPP Entity. This value is the MRU that the remote entity is using when sending packets to the local PPP entity. The value of this object is meaningful only when the link has reached the open state (ifOperStatus is up).
pppLinkStatusRemoteMRU
1.3.6.1.2.1.10.23.1.1.1.1.7
Integer32 (1..2147483647)
The current value of the MRU for the remote PPP Entity. This value is the MRU that the local entity is using when sending packets to the remote PPP entity. The value of this object is meaningful only when
the link has reached the open state (ifOperStatus is up).
pppLinkStatusLocalToPeerACCMap
1.3.6.1.2.1.10.23.1.1.1.1.8
OCTET STRING SIZE (4)
The current value of the ACC Map used for sending packets from the local PPP entity to the remote PPP entity. The value of this object is meaningful only when the link has reached the open state (ifOperStatus is up).
pppLinkStatusPeerToLocalACCMap
1.3.6.1.2.1.10.23.1.1.1.1.9
OCTET STRING SIZE (4)
The ACC Map used by the remote PPP entity when transmitting packets to the local PPP entity. The value of this object is meaningful only when the link has reached the open state (ifOperStatus is up).
pppLinkStatusLocalToRemoteProtocolCompression
1.3.6.1.2.1.10.23.1.1.1.1.10
INTEGER1 = enabled2 = disabled · Integer32
Indicates whether the local PPP entity will use Protocol Compression when transmitting packets to the remote PPP entity. The value of this object is meaningful only when the link
has reached the open state (ifOperStatus is up).
pppLinkStatusRemoteToLocalProtocolCompression
1.3.6.1.2.1.10.23.1.1.1.1.11
INTEGER1 = enabled2 = disabled · Integer32
Indicates whether the remote PPP entity will use Protocol Compression when transmitting packets to the local PPP entity. The value of this object is meaningful only when the link has reached the open state
(ifOperStatus is up).
pppLinkStatusLocalToRemoteACCompression
1.3.6.1.2.1.10.23.1.1.1.1.12
INTEGER1 = enabled2 = disabled · Integer32
Indicates whether the local PPP entity will use Address and Control Compression when transmitting packets to the remote PPP entity. The value of this object is meaningful only when the link has
reached the open state (ifOperStatus is up).
pppLinkStatusRemoteToLocalACCompression
1.3.6.1.2.1.10.23.1.1.1.1.13
INTEGER1 = enabled2 = disabled · Integer32
Indicates whether the remote PPP entity will use Address and Control Compression when transmitting packets to the local PPP entity. The value of this object is meaningful only when the link has reached
the open state (ifOperStatus is up).
pppLinkStatusTransmitFcsSize
1.3.6.1.2.1.10.23.1.1.1.1.14
Integer32 (0..128)
The size of the Frame Check Sequence (FCS) in bits that the local node will generate when sending packets to the remote node. The value of this object is meaningful only when the link has reached the open state (ifOperStatus is up).
pppLinkStatusReceiveFcsSize
1.3.6.1.2.1.10.23.1.1.1.1.15
Integer32 (0..128)
The size of the Frame Check Sequence (FCS) in bits that the remote node will generate when sending packets to the local node. The value of this object is meaningful only when the link has reached the open state (ifOperStatus is up).
pppLinkConfigTable
1.3.6.1.2.1.10.23.1.1.2
Index: ifIndex
A table containing the LCP configuration parameters for this PPP Link. These variables represent the initial configuration of the PPP Link. The actual values of the parameters may be changed when the link is brought up via the LCP options negotiation mechanism.
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
pppLinkConfigInitialMRU
1.3.6.1.2.1.10.23.1.1.2.1.1
Integer32 (0..2147483647)
Reference: Section 7.2, Maximum Receive Unit of RFC1331.
The initial Maximum Receive Unit (MRU) that the local PPP entity will advertise to the remote entity. If the value of this variable is 0 then the local PPP entity will not advertise any MRU to the
remote entity and the default MRU will be assumed.
Changing this object will have effect when the link is next restarted.
pppLinkConfigReceiveACCMap
1.3.6.1.2.1.10.23.1.1.2.1.2
OCTET STRING SIZE (4)
Reference: Section 7.3, page 4, Async-Control-Character- Map of RFC1331.
The Asynchronous-Control-Character-Map (ACC) that the local PPP entity requires for use on its receive side. In effect, this is the ACC Map that is required in order to ensure that the local modem will
successfully receive all characters. The actual ACC map
used on the receive side of the link will be a combination of the local node's pppLinkConfigReceiveACCMap and the remote node's pppLinkConfigTransmitACCMap. Changing this object will have effect when the link is next restarted.
pppLinkConfigTransmitACCMap
1.3.6.1.2.1.10.23.1.1.2.1.3
OCTET STRING SIZE (4)
Reference: Section 7.3, page 4, Async-Control-Character- Map of RFC1331.
The Asynchronous-Control-Character-Map (ACC) that the local PPP entity requires for use on its transmit side. In effect, this is the ACC Map that is required in order to ensure that all characters can be successfully transmitted through the local modem. The actual ACC map used on the transmit side of the link will be a combination of the local node's PppLinkConfigTransmitACCMap and the remote node's pppLinkConfigReceiveACCMap. Changing this object will have effect when the link is next restarted.
pppLinkConfigMagicNumber
1.3.6.1.2.1.10.23.1.1.2.1.4
INTEGER1 = false2 = true · Integer32
Reference: Section 7.6, Magic Number, of RFC1331.
If true(2) then the local node will attempt to perform Magic Number negotiation with the remote node. If false(1) then this negotiation is not performed. In any event, the local node will comply with any magic number negotiations attempted by the remote node, per the PPP specification. Changing this object will have effect when the link is next restarted.
pppLinkConfigFcsSize
1.3.6.1.2.1.10.23.1.1.2.1.5
Integer32 (0..128)
The size of the FCS, in bits, the local node will attempt to negotiate for use with the remote node. Regardless of the value of this object, the local node will comply with any FCS size negotiations initiated by the remote node, per the PPP specification. Changing this object will have effect when the link is next restarted.