2007-01-08
Download T11-FC-RSCN-MIB.txt Open T11-FC-RSCN-MIB.txt in a new tab
The MIB module for the management of registrations by Nx_Ports to receive RSCNs (Registered State Change Notifications) on a Fibre Channel Fabric, as defined in FC-LS, and for the monitoring of RSCNs sent/received or rejected in a Fibre Channel Fabric. Copyright (C) The Internet Society (2007). This version of this MIB module is part of RFC 4983; see the RFC itself for full legal notices.
| Name | OID |
|---|---|
| t11FcRscnRegTable | 1.3.6.1.2.1.161.1.1.1 |
| t11FcRscnStatsTable | 1.3.6.1.2.1.161.1.2.1 |
| t11FcRscnNotifyControlTable | 1.3.6.1.2.1.161.1.3.1 |
| Name | OID |
|---|---|
| t11FcRscnElsRejectReqNotify | 1.3.6.1.2.1.161.0.1 |
| t11FcRscnIlsRejectReqNotify | 1.3.6.1.2.1.161.0.2 |
END OF TOC
1.3.6.1.2.1.161.1.1.1
Index: fcmInstanceIndex · fcmSwitchIndex · t11FcRscnFabricIndex · t11FcRscnRegFcId
A table of Nx_Ports that have registered to receive RSCNs on all Fabrics configured on one or more Fibre Channel switches.
from FC-MGMT-MIB
Unsigned32 (1..4294967295)
An arbitrary integer value that uniquely identifies this instance amongst all local Fibre Channel management instances. It is mandatory to keep this value constant between restarts of the agent, and to make every possible effort to keep it constant across restarts (but note, it is unrealistic to expect it to remain constant across all re-configurations of the local system, e.g., across the replacement of all non- volatile storage).
Unsigned32 (1..4294967295)
An arbitrary integer that uniquely identifies a Fibre Channel switch amongst those managed by one Fibre Channel management instance. It is mandatory to keep this value constant between restarts of the agent, and to make every possible effort to keep it constant across restarts.
1.3.6.1.2.1.161.1.1.1.1.1
T11FabricIndexA Fabric Index that is used as a unique index value to identify a particular Fabric within one (or more) physical infrastructures. In an environment that is conformant to FC-SW-3, where there is always exactly one Fabric in a single physical infrastructure, the value of this Fabric Index will always be 1. However, the current standard, FC-SW-4, defines how multiple Fabrics, each with its own management instrumentation, could operate within one (or more) physical infrastructures. When such multiple Fabrics are in use, this index value is used to uniquely identify a particular Fabric within a physical infrastructure. Note that the value of this textual convention has a range of (0..4095) so as to be consistent with FC-SW-4, which says that a 'VF_ID Bitmap' is 512 bytes long, with the high-order bit representing VF_ID zero, and the low-order bit representing 4095.Reference: Fibre Channel - Switch Fabric - 4 (FC-SW-4), ANSI INCITS 418-2006, section 6.1.27.2.4. (0..4095) · Unsigned32 · hint d
An index value that uniquely identifies a particular Fabric. In a Fabric conformant to FC-SW-4, multiple Virtual Fabrics can operate within one (or more) physical infrastructures. In such a case, this index value is used to uniquely identify a particular Fabric within a physical infrastructure. In a Fabric that has (or can have) only a single Fabric operating within the physical infrastructure, the value of this Fabric Index will always be 1. Reference: ANSI INCITS 418-2006, Fibre Channel - Switch Fabric - 4 (FC-SW-4), December 2006.
1.3.6.1.2.1.161.1.1.1.1.2
FcAddressIdOrZeroA Fibre Channel Address ID, a 24-bit value unique within the address space of a Fabric. The zero-length string value is used in circumstances in which the WWN is unassigned/unknown. SIZE (3) · OCTET STRING
The Fibre Channel Address Identifier of the registering Nx_Port.
1.3.6.1.2.1.161.1.1.1.1.3
BITS
This object indicates the type of registration desired by the registering Nx_Port, one bit per type: 'fromFabricController' -- RSCNs generated for events detected by the Fabric Controller. 'fromNxPorts' -- RSCNs generated for events detected by the affected Nx_Port. Reference: ANSI INCITS 433-2007, Fibre Channel - Link Services (FC-LS), July 2007, Table 40.
1.3.6.1.2.1.161.1.2.1
Index: fcmInstanceIndex · fcmSwitchIndex · t11FcRscnFabricIndex
The RSCN-related statistics on all Fabrics configured on one or more Fibre Channel switches. Two levels of statistics are included: 1) counters at the message-type level, for: - the number of SCRs received/rejected, - the number of RSCNs sent/received/rejected, - the number of SW_RSCNs sent/received/rejected. 2) counters of sent/received RSCNs per 'Event Qualifier' value. Note that if and when several RSCN events are coalesced into a single RSCN message, then that message may be counted in more than one of these counters.
from FC-MGMT-MIB
Unsigned32 (1..4294967295)
An arbitrary integer value that uniquely identifies this instance amongst all local Fibre Channel management instances. It is mandatory to keep this value constant between restarts of the agent, and to make every possible effort to keep it constant across restarts (but note, it is unrealistic to expect it to remain constant across all re-configurations of the local system, e.g., across the replacement of all non- volatile storage).
Unsigned32 (1..4294967295)
An arbitrary integer that uniquely identifies a Fibre Channel switch amongst those managed by one Fibre Channel management instance. It is mandatory to keep this value constant between restarts of the agent, and to make every possible effort to keep it constant across restarts.
1.3.6.1.2.1.161.1.2.1.1.1
Counter32
The number of SCRs received from Nx_Ports by this switch on this Fabric. This counter has no discontinuities other than those that all Counter32s have when sysUpTime=0.
1.3.6.1.2.1.161.1.2.1.1.2
Counter32
The number of RSCNs received from Nx_Ports by this switch on this Fabric. This counter has no discontinuities other than those that all Counter32s have when sysUpTime=0.
1.3.6.1.2.1.161.1.2.1.1.3
Counter32
The number of RSCNs transmitted to Nx_Ports by this switch on this Fabric. This counter has no discontinuities other than those that all Counter32s have when sysUpTime=0.
1.3.6.1.2.1.161.1.2.1.1.4
Counter32
The number of SW_RSCNs received by this switch from other switches on this Fabric. This counter has no discontinuities other than those that all Counter32s have when sysUpTime=0.
1.3.6.1.2.1.161.1.2.1.1.5
Counter32
The number of SW_RSCNs transmitted by this switch from other switches on this Fabric. This counter has no discontinuities other than those that all Counter32s have when sysUpTime=0.
1.3.6.1.2.1.161.1.2.1.1.6
Counter32
The number of SCRs rejected by this switch on this Fabric. This counter has no discontinuities other than those that all Counter32s have when sysUpTime=0.
1.3.6.1.2.1.161.1.2.1.1.7
Counter32
The number of RSCNs rejected by this switch on this Fabric. This counter has no discontinuities other than those that all Counter32s have when sysUpTime=0.
1.3.6.1.2.1.161.1.2.1.1.8
Counter32
The number of SW_RSCN rejected by this switch on this Fabric. This counter has no discontinuities other than those that all Counter32s have when sysUpTime=0.
1.3.6.1.2.1.161.1.2.1.1.9
Counter32
The number of Registered State Change Notifications (RSCNs) received by this switch on this Fabric which contained an RSCN Event Qualifier value of '0000'b meaning 'Event is not specified'. This counter has no discontinuities other than those that all Counter32s have when sysUpTime=0. Reference: ANSI INCITS 433-2007, Fibre Channel - Link Services (FC-LS), July 2007, Table 36.
1.3.6.1.2.1.161.1.2.1.1.10
Counter32
The number of Registered State Change Notifications (RSCNs) sent by this switch on this Fabric which contained an RSCN Event Qualifier value of '0000'b meaning 'Event is not specified'. This counter has no discontinuities other than those that all Counter32s have when sysUpTime=0. Reference: ANSI INCITS 433-2007, Fibre Channel - Link Services (FC-LS), July 2007, Table 36.
1.3.6.1.2.1.161.1.2.1.1.11
Counter32
The number of Registered State Change Notifications (RSCNs) received by this switch on this Fabric which contained an RSCN Event Qualifier value of '0002'b meaning 'Changed Port Attribute'. This counter has no discontinuities other than those that all Counter32s have when sysUpTime=0. Reference: ANSI INCITS 433-2007, Fibre Channel - Link Services (FC-LS), July 2007, Table 36.
1.3.6.1.2.1.161.1.2.1.1.12
Counter32
The number of Registered State Change Notifications (RSCNs) sent by this switch on this Fabric which contained an RSCN Event Qualifier value of '0002'b meaning 'Changed Port Attribute'. This counter has no discontinuities other than those that all Counter32s have when sysUpTime=0. Reference: ANSI INCITS 433-2007, Fibre Channel - Link Services (FC-LS), July 2007, Table 36.
1.3.6.1.2.1.161.1.2.1.1.13
Counter32
The number of Registered State Change Notifications (RSCNs) received by this switch on this Fabric which contained an RSCN Event Qualifier value of '0003'b meaning 'Changed Service Object'. This counter has no discontinuities other than those that all Counter32s have when sysUpTime=0. Reference: ANSI INCITS 433-2007, Fibre Channel - Link Services (FC-LS), July 2007, Table 36.
1.3.6.1.2.1.161.1.2.1.1.14
Counter32
The number of Registered State Change Notifications (RSCNs) sent by this switch on this Fabric which contained an RSCN Event Qualifier value of '0003'b meaning 'Changed Service Object'. This counter has no discontinuities other than those that all Counter32s have when sysUpTime=0. Reference: ANSI INCITS 433-2007, Fibre Channel - Link Services (FC-LS), July 2007, Table 36.
1.3.6.1.2.1.161.1.2.1.1.15
Counter32
The number of Registered State Change Notifications (RSCNs) received by this switch on this Fabric which contained an RSCN Event Qualifier value of '0004'b meaning 'Changed Switch Configuration'. This counter has no discontinuities other than those that all Counter32s have when sysUpTime=0. Reference: ANSI INCITS 433-2007, Fibre Channel - Link Services (FC-LS), July 2007, Table 36.
1.3.6.1.2.1.161.1.2.1.1.16
Counter32
The number of Registered State Change Notifications (RSCNs) sent by this switch on this Fabric which contained an RSCN Event Qualifier value of '0004'b meaning 'Changed Switch Configuration'. This counter has no discontinuities other than those that all Counter32s have when sysUpTime=0. Reference: ANSI INCITS 433-2007, Fibre Channel - Link Services (FC-LS), July 2007, Table 36.
1.3.6.1.2.1.161.1.2.1.1.17
Counter32
The number of Registered State Change Notifications (RSCNs) received by this switch on this Fabric which contained an RSCN Event Qualifier value of '0005'b meaning 'Removed Object'. This counter has no discontinuities other than those that all Counter32s have when sysUpTime=0. Reference: ANSI INCITS 433-2007, Fibre Channel - Link Services (FC-LS), July 2007, Table 36.
1.3.6.1.2.1.161.1.2.1.1.18
Counter32
The number of Registered State Change Notifications (RSCNs) sent by this switch on this Fabric which contained an RSCN Event Qualifier value of '0005'b meaning 'Removed Object'. This counter has no discontinuities other than those that all Counter32s have when sysUpTime=0. Reference: ANSI INCITS 433-2007, Fibre Channel - Link Services (FC-LS), July 2007, Table 36.
1.3.6.1.2.1.161.1.3.1
Index: fcmInstanceIndex · fcmSwitchIndex · t11FcRscnFabricIndex
A table of control information for notifications generated due to the rejection of an SCR or RSCN.
from FC-MGMT-MIB
Unsigned32 (1..4294967295)
An arbitrary integer value that uniquely identifies this instance amongst all local Fibre Channel management instances. It is mandatory to keep this value constant between restarts of the agent, and to make every possible effort to keep it constant across restarts (but note, it is unrealistic to expect it to remain constant across all re-configurations of the local system, e.g., across the replacement of all non- volatile storage).
Unsigned32 (1..4294967295)
An arbitrary integer that uniquely identifies a Fibre Channel switch amongst those managed by one Fibre Channel management instance. It is mandatory to keep this value constant between restarts of the agent, and to make every possible effort to keep it constant across restarts.
1.3.6.1.2.1.161.1.3.1.1.1
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
This object specifies if a t11FcRscnIlsRejectReqNotify notification should be generated when this switch rejects an SW_RSCN on this Fabric. Values written to this object should be retained over agent reboots.
1.3.6.1.2.1.161.1.3.1.1.2
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
This object specifies if a t11FcRscnElsRejectReqNotify notification should be generated when this switch rejects an RSCN or SCR on this Fabric. Values written to this object should be retained over agent reboots.
1.3.6.1.2.1.161.1.3.1.1.3
OCTET STRING SIZE (0..255)
The binary content of the RSCN, SCR, or SW_RSCN that was most recently rejected by this switch on this Fabric. The value is formatted as an octet string (in network byte order) as described in the relevant Fibre Channel standard, containing the payload (which is typically a list of affected ports and error codes) of the rejected RSCN or SCR as described in FC-LS, or the rejected SW_RSCN as described in FC-SW-4. This object contains the zero-length string if and when the RSCN/SCR/SW_RSCN payload is unavailable. When the length of this object is 255 octets, it contains the first 255 octets of the payload (in network byte order). Reference: ANSI INCITS 433-2007, Fibre Channel - Link Services (FC-LS), July 2007, Tables 34 & 39. ANSI INCITS 418-2006, Fibre Channel - Switch Fabric - 4 (FC-SW-4), December 2006, Table 45.
1.3.6.1.2.1.161.1.3.1.1.4
FcNameIdOrZeroThe World Wide Name (WWN) associated with a Fibre Channel (FC) entity. WWNs were initially defined as 64-bits in length. The latest definition (for future use) is 128-bits long. The zero-length string value is used in circumstances in which the WWN is unassigned/unknown. SIZE (0 | 8 | 16) · OCTET STRING
The WWN that was the source of the RSCN, SCR, or SW_RSCN that was most recently rejected by this switch on this Fabric.
1.3.6.1.2.1.161.1.3.1.1.5
T11NsGs4RejectReasonCode1 = none2 = invalidCmdCode3 = invalidVerLevel4 = logicalError5 = invalidIUSize6 = logicalBusy7 = protocolError8 = unableToPerformCmdReq9 = cmdNotSupported10 = serverNotAvailable11 = couldNotEstabSession12 = vendorErrorThe FC-GS-4 reject reason code for a request. none(1) - no error. invalidCmdCode(2) - request contained an invalid command code. invalidVerLevel(3) - request contained an invalid version number. logicalError(4) - there was a logical error. invalidIUSize(5) - the CT_IU (Information Unit) size was invalid. logicalBusy(6) - the module is busy. protocolError(7) - there was a protocol error. unableToPerformCmdReq(8) - the command specified in the req could not be executed. The details of exactly what failed will be in the corresponding reason code explanation. cmdNotSupported(9) - the command is not supported. serverNotAvailable(10) - the identified server was not available. couldNotEstabSession(11) - a server session could not be established. vendorError(12) - a vendor-specific error.Reference: ANSI INCITS 387-2004, Fibre Channel - Generic Services-4 (FC-GS-4), section 4.4.3. · Integer32
This object contains the Reason Code of the most recent rejection by this switch of an RSCN, SCR or SW_RSCN on this Fabric. Reference: ANSI INCITS 433-2007, Fibre Channel - Link Services (FC-LS), July 2007, Table 146. ANSI INCITS 418-2006, Fibre Channel - Switch Fabric - 4 (FC-SW-4), December 2006, Table 5.
1.3.6.1.2.1.161.1.3.1.1.6
OCTET STRING SIZE (1)
This object contains the Reason Code Explanation of the most recent rejection by this switch of an RSCN, SCR or SW_RSCN on this Fabric. Reference: ANSI INCITS 433-2007, Fibre Channel - Link Services (FC-LS), July 2007, Table 147. ANSI INCITS 418-2006, Fibre Channel - Switch Fabric - 4 (FC-SW-4), December 2006, Table 6.
1.3.6.1.2.1.161.1.3.1.1.7
OCTET STRING SIZE (1)
This object contains the Reason Vendor Specific Code of the most recent rejection by this switch of an RSCN, SCR or SW_RSCN on this Fabric. Reference: ANSI INCITS 433-2007, Fibre Channel - Link Services (FC-LS), July 2007, Table 148. ANSI INCITS 418-2006, Fibre Channel - Switch Fabric - 4 (FC-SW-4), December 2006, Section 6.1.3.
1.3.6.1.2.1.161.0.1
This notification is generated when a switch rejects an SCR or RSCN. The value of t11FcRscnRejectedRequestString indicates the binary content of the rejected request if available, or the zero-length string otherwise. The source of the rejected request is given by t11FcRscnRejectedRequestSource, and the reason for rejection is given by the values of t11FcRscnRejectReasonCode, t11FcRscnRejectReasonCodeExp and t11FcRscnRejectReasonVendorCode.
1.3.6.1.2.1.161.1.3.1.1.3
OCTET STRING SIZE (0..255)
The binary content of the RSCN, SCR, or SW_RSCN that was most recently rejected by this switch on this Fabric. The value is formatted as an octet string (in network byte order) as described in the relevant Fibre Channel standard, containing the payload (which is typically a list of affected ports and error codes) of the rejected RSCN or SCR as described in FC-LS, or the rejected SW_RSCN as described in FC-SW-4. This object contains the zero-length string if and when the RSCN/SCR/SW_RSCN payload is unavailable. When the length of this object is 255 octets, it contains the first 255 octets of the payload (in network byte order). Reference: ANSI INCITS 433-2007, Fibre Channel - Link Services (FC-LS), July 2007, Tables 34 & 39. ANSI INCITS 418-2006, Fibre Channel - Switch Fabric - 4 (FC-SW-4), December 2006, Table 45.
1.3.6.1.2.1.161.1.3.1.1.4
FcNameIdOrZeroThe World Wide Name (WWN) associated with a Fibre Channel (FC) entity. WWNs were initially defined as 64-bits in length. The latest definition (for future use) is 128-bits long. The zero-length string value is used in circumstances in which the WWN is unassigned/unknown. SIZE (0 | 8 | 16) · OCTET STRING
The WWN that was the source of the RSCN, SCR, or SW_RSCN that was most recently rejected by this switch on this Fabric.
1.3.6.1.2.1.161.1.3.1.1.5
T11NsGs4RejectReasonCode1 = none2 = invalidCmdCode3 = invalidVerLevel4 = logicalError5 = invalidIUSize6 = logicalBusy7 = protocolError8 = unableToPerformCmdReq9 = cmdNotSupported10 = serverNotAvailable11 = couldNotEstabSession12 = vendorErrorThe FC-GS-4 reject reason code for a request. none(1) - no error. invalidCmdCode(2) - request contained an invalid command code. invalidVerLevel(3) - request contained an invalid version number. logicalError(4) - there was a logical error. invalidIUSize(5) - the CT_IU (Information Unit) size was invalid. logicalBusy(6) - the module is busy. protocolError(7) - there was a protocol error. unableToPerformCmdReq(8) - the command specified in the req could not be executed. The details of exactly what failed will be in the corresponding reason code explanation. cmdNotSupported(9) - the command is not supported. serverNotAvailable(10) - the identified server was not available. couldNotEstabSession(11) - a server session could not be established. vendorError(12) - a vendor-specific error.Reference: ANSI INCITS 387-2004, Fibre Channel - Generic Services-4 (FC-GS-4), section 4.4.3. · Integer32
This object contains the Reason Code of the most recent rejection by this switch of an RSCN, SCR or SW_RSCN on this Fabric. Reference: ANSI INCITS 433-2007, Fibre Channel - Link Services (FC-LS), July 2007, Table 146. ANSI INCITS 418-2006, Fibre Channel - Switch Fabric - 4 (FC-SW-4), December 2006, Table 5.
1.3.6.1.2.1.161.1.3.1.1.6
OCTET STRING SIZE (1)
This object contains the Reason Code Explanation of the most recent rejection by this switch of an RSCN, SCR or SW_RSCN on this Fabric. Reference: ANSI INCITS 433-2007, Fibre Channel - Link Services (FC-LS), July 2007, Table 147. ANSI INCITS 418-2006, Fibre Channel - Switch Fabric - 4 (FC-SW-4), December 2006, Table 6.
1.3.6.1.2.1.161.1.3.1.1.7
OCTET STRING SIZE (1)
This object contains the Reason Vendor Specific Code of the most recent rejection by this switch of an RSCN, SCR or SW_RSCN on this Fabric. Reference: ANSI INCITS 433-2007, Fibre Channel - Link Services (FC-LS), July 2007, Table 148. ANSI INCITS 418-2006, Fibre Channel - Switch Fabric - 4 (FC-SW-4), December 2006, Section 6.1.3.
1.3.6.1.2.1.161.0.2
This notification is generated when a switch rejects an SW_RSCN. The value of t11FcRscnRejectedRequestString indicates the binary content of the rejected request if available, or the zero-length string otherwise. The source of the rejected request is given by t11FcRscnRejectedRequestSource, and the reason for rejection is given by the values of t11FcRscnRejectReasonCode, t11FcRscnRejectReasonCodeExp and t11FcRscnRejectReasonVendorCode.
1.3.6.1.2.1.161.1.3.1.1.3
OCTET STRING SIZE (0..255)
The binary content of the RSCN, SCR, or SW_RSCN that was most recently rejected by this switch on this Fabric. The value is formatted as an octet string (in network byte order) as described in the relevant Fibre Channel standard, containing the payload (which is typically a list of affected ports and error codes) of the rejected RSCN or SCR as described in FC-LS, or the rejected SW_RSCN as described in FC-SW-4. This object contains the zero-length string if and when the RSCN/SCR/SW_RSCN payload is unavailable. When the length of this object is 255 octets, it contains the first 255 octets of the payload (in network byte order). Reference: ANSI INCITS 433-2007, Fibre Channel - Link Services (FC-LS), July 2007, Tables 34 & 39. ANSI INCITS 418-2006, Fibre Channel - Switch Fabric - 4 (FC-SW-4), December 2006, Table 45.
1.3.6.1.2.1.161.1.3.1.1.4
FcNameIdOrZeroThe World Wide Name (WWN) associated with a Fibre Channel (FC) entity. WWNs were initially defined as 64-bits in length. The latest definition (for future use) is 128-bits long. The zero-length string value is used in circumstances in which the WWN is unassigned/unknown. SIZE (0 | 8 | 16) · OCTET STRING
The WWN that was the source of the RSCN, SCR, or SW_RSCN that was most recently rejected by this switch on this Fabric.
1.3.6.1.2.1.161.1.3.1.1.5
T11NsGs4RejectReasonCode1 = none2 = invalidCmdCode3 = invalidVerLevel4 = logicalError5 = invalidIUSize6 = logicalBusy7 = protocolError8 = unableToPerformCmdReq9 = cmdNotSupported10 = serverNotAvailable11 = couldNotEstabSession12 = vendorErrorThe FC-GS-4 reject reason code for a request. none(1) - no error. invalidCmdCode(2) - request contained an invalid command code. invalidVerLevel(3) - request contained an invalid version number. logicalError(4) - there was a logical error. invalidIUSize(5) - the CT_IU (Information Unit) size was invalid. logicalBusy(6) - the module is busy. protocolError(7) - there was a protocol error. unableToPerformCmdReq(8) - the command specified in the req could not be executed. The details of exactly what failed will be in the corresponding reason code explanation. cmdNotSupported(9) - the command is not supported. serverNotAvailable(10) - the identified server was not available. couldNotEstabSession(11) - a server session could not be established. vendorError(12) - a vendor-specific error.Reference: ANSI INCITS 387-2004, Fibre Channel - Generic Services-4 (FC-GS-4), section 4.4.3. · Integer32
This object contains the Reason Code of the most recent rejection by this switch of an RSCN, SCR or SW_RSCN on this Fabric. Reference: ANSI INCITS 433-2007, Fibre Channel - Link Services (FC-LS), July 2007, Table 146. ANSI INCITS 418-2006, Fibre Channel - Switch Fabric - 4 (FC-SW-4), December 2006, Table 5.
1.3.6.1.2.1.161.1.3.1.1.6
OCTET STRING SIZE (1)
This object contains the Reason Code Explanation of the most recent rejection by this switch of an RSCN, SCR or SW_RSCN on this Fabric. Reference: ANSI INCITS 433-2007, Fibre Channel - Link Services (FC-LS), July 2007, Table 147. ANSI INCITS 418-2006, Fibre Channel - Switch Fabric - 4 (FC-SW-4), December 2006, Table 6.
1.3.6.1.2.1.161.1.3.1.1.7
OCTET STRING SIZE (1)
This object contains the Reason Vendor Specific Code of the most recent rejection by this switch of an RSCN, SCR or SW_RSCN on this Fabric. Reference: ANSI INCITS 433-2007, Fibre Channel - Link Services (FC-LS), July 2007, Table 148. ANSI INCITS 418-2006, Fibre Channel - Switch Fabric - 4 (FC-SW-4), December 2006, Section 6.1.3.