This MIB module defines a portion of the SNMP enterprise MIBs under Enterasys Networks' enterprise OID pertaining to Multi-User IEEE 802.1X authentication.
This MIB is designed to supplement and be used in connection with the standard IEEE 802.1X-2001 MIB.
EnabledStatus1 = enabled2 = disabledA simple status value for the object. · Integer32 · default enabled (1)
When enabled(1), RADIUS accounting start, interim and stop frames are sent to the configured RADIUS server(s).
When disabled(2), accounting packets are not sent to the RADIUS server.
Table details
etsysMulti1xAccessEntityTable
1.3.6.1.4.1.5624.1.2.53.1.2.1
Index: dot1xPaePortNumber · etsysMulti1xAeIndex
The system and configuration information for all the Access Entities. Reference: 9.6.1
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
The Port number associated with this Port. Reference: 802.1X-2001 9.6.1, Port number, 802.1X-2004 9.6.1, Port number
etsysMulti1xAeIndex
1.3.6.1.4.1.5624.1.2.53.1.2.1.1.1
Unsigned32
Indicates if this Access Entity is currently active.
etsysMulti1xAeActive
1.3.6.1.4.1.5624.1.2.53.1.2.1.1.2
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
Indicates if this Access Entity is currently active.
The current state of the Backend Authentication state machine. Reference: 9.4.1, Backend Authentication state
etsysMulti1xAeInitialize
1.3.6.1.4.1.5624.1.2.53.1.2.1.1.5
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
The initialization control for this Access Entity. Setting this attribute TRUE causes the Access Entity to be initialized. The attribute value reverts to FALSE once initialization has completed. Reference: 9.6.1.2, Initialize Port
etsysMulti1xAeReauthenticate
1.3.6.1.4.1.5624.1.2.53.1.2.1.1.6
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
The reauthentication control for this Access Entity. Setting this attribute TRUE causes the Access Entity state machine to reauthenticate the Supplicant. Setting this attribute FALSE has no effect. This attribute always returns FALSE when it is read. Reference: 9.4.1.3 Reauthenticate
etsysMulti1xAeReAuthPeriod
1.3.6.1.4.1.5624.1.2.53.1.2.1.1.7
Unsigned32 · seconds · default 3600
The value, in seconds, of the reAuthPeriod constant currently in use by the Reauthentication Timer state machine. Reference: 9.4.1, reAuthPeriod
etsysMulti1xAeSupplicantAddress
1.3.6.1.4.1.5624.1.2.53.1.2.1.1.8
MacAddressRepresents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires MAC addresses to be transmitted most significant bit first. SIZE (6) · OCTET STRING · hint 1x:
The MAC address that this Access Entity is currently bound to.
etsysMulti1xAeUserName
1.3.6.1.4.1.5624.1.2.53.1.2.1.1.9
SnmpAdminStringAn octet string containing administrative information, preferably in human-readable form.
To facilitate internationalization, this information is represented using the ISO/IEC IS 10646-1 character set, encoded as an octet string using the UTF-8 transformation format described in [RFC2279].
Since additional code points are added by amendments to the 10646 standard from time to time, implementations must be prepared to encounter any code point from 0x00000000 to 0x7fffffff. Byte sequences that do not correspond to the valid UTF-8 encoding of a code point or are outside this range are prohibited.
The use of control codes should be avoided.
When it is necessary to represent a newline, the control code sequence CR LF should be used.
The use of leading or trailing white space should be avoided.
For code points not directly supported by user interface hardware or software, an alternative means of entry and display, such as hexadecimal, may be provided.
For information encoded in 7-bit US-ASCII, the UTF-8 encoding is identical to the US-ASCII encoding.
UTF-8 may require multiple bytes to represent a single character / code point; thus the length of this object in octets may be different from the number of characters encoded. Similarly, size constraints refer to the number of encoded octets, not the number of characters represented by an encoding.
Note that when this TC is used for an object that is used or envisioned to be used as an index, then a SIZE restriction MUST be specified so that the number of sub-identifiers for any object instance does not exceed the limit of 128, as defined by [RFC3416].
Note that the size of an SnmpAdminString object is measured in octets, not characters. SIZE (0..255) · OCTET STRING · hint 255t
The User-Name representing the identity of the Supplicant PAE. Reference: 9.4.4, Session User Name
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
The Port number associated with this Port. Reference: 802.1X-2001 9.6.1, Port number, 802.1X-2004 9.6.1, Port number
etsysMulti1xAeEapolFramesRx
1.3.6.1.4.1.5624.1.2.53.1.2.2.1.1
Counter32
The number of valid EAPOL frames of any type that have been received by this Access Entity. Reference: 9.4.2, EAPOL frames received
etsysMulti1xAeEapolFramesTx
1.3.6.1.4.1.5624.1.2.53.1.2.2.1.2
Counter32
The number of EAPOL frames of any type that have been transmitted by this Access Entity. Reference: 9.4.2, EAPOL frames transmitted
etsysMulti1xAeEapolStartFramesRx
1.3.6.1.4.1.5624.1.2.53.1.2.2.1.3
Counter32
The number of EAPOL Start frames that have been received by this Access Entity. Reference: 9.4.2, EAPOL Start frames received
etsysMulti1xAeEapolLogoffFramesRx
1.3.6.1.4.1.5624.1.2.53.1.2.2.1.4
Counter32
The number of EAPOL Logoff frames that have been received by this Access Entity. Reference: 9.4.2, EAPOL Logoff frames received
etsysMulti1xAeEapolRespIdFramesRx
1.3.6.1.4.1.5624.1.2.53.1.2.2.1.5
Counter32
The number of EAP Resp/Id frames that have been received by this Access Entity. Reference: 9.4.2, EAPOL Resp/Id frames received
etsysMulti1xAeEapolRespFramesRx
1.3.6.1.4.1.5624.1.2.53.1.2.2.1.6
Counter32
The number of valid EAP Response frames (other than Resp/Id frames) that have been received by this Access Entity. Reference: 9.4.2, EAPOL Response frames received
etsysMulti1xAeEapolReqIdFramesTx
1.3.6.1.4.1.5624.1.2.53.1.2.2.1.7
Counter32
The number of EAP Req/Id frames that have been transmitted by this Access Entity. Reference: 9.4.2, EAPOL Req/Id frames transmitted
etsysMulti1xAeEapolReqFramesTx
1.3.6.1.4.1.5624.1.2.53.1.2.2.1.8
Counter32
The number of EAP Request frames (other than Rq/Id frames) that have been transmitted by this Access Entity. Reference: 9.4.2, EAPOL Request frames transmitted
etsysMulti1xAeInvalidEapolFramesRx
1.3.6.1.4.1.5624.1.2.53.1.2.2.1.9
Counter32
The number of EAPOL frames that have been received by this Access Entity in which the frame type is not recognized. Reference: 9.4.2, Invalid EAPOL frames received
etsysMulti1xAeEapLengthErrorFramesRx
1.3.6.1.4.1.5624.1.2.53.1.2.2.1.10
Counter32
The number of EAPOL frames that have been received by this Access Entity in which the Packet Body Length field is invalid. Reference: 9.4.2, EAP length error frames received
etsysMulti1xAeEapolFrameVersion
1.3.6.1.4.1.5624.1.2.53.1.2.2.1.11
Unsigned32
The protocol version number carried in the most recently received EAPOL frame. Reference: 9.4.2, Last EAPOL frame version
etsysMulti1xAeEapolFrameSource
1.3.6.1.4.1.5624.1.2.53.1.2.2.1.12
MacAddressRepresents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires MAC addresses to be transmitted most significant bit first. SIZE (6) · OCTET STRING · hint 1x:
The source MAC address carried in the most recently received EAPOL frame. Reference: 9.4.2, Last EAPOL frame source
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
The Port number associated with this Port. Reference: 802.1X-2001 9.6.1, Port number, 802.1X-2004 9.6.1, Port number
etsysMulti1xAeEntersConnecting
1.3.6.1.4.1.5624.1.2.53.1.2.3.1.1
Counter32
Counts the number of times that the state machine transitions to the CONNECTING state from any other state. Reference: 9.4.2, 8.5.4.2.1
etsysMulti1xAeEapLogoffsWhileConnecting
1.3.6.1.4.1.5624.1.2.53.1.2.3.1.2
Counter32
Counts the number of times that the state machine transitions from CONNECTING to DISCONNECTED as a result of receiving an EAPOL-Logoff message. Reference: 9.4.2, 8.5.4.2.2
etsysMulti1xAeEntersAuthenticating
1.3.6.1.4.1.5624.1.2.53.1.2.3.1.3
Counter32
Counts the number of times that the state machine transitions from CONNECTING to AUTHENTICATING, as a result of an EAP-Response/Identity message being received from the Supplicant. Reference: 9.4.2, 8.5.4.2.3
etsysMulti1xAeAuthSuccessWhileAuthenticating
1.3.6.1.4.1.5624.1.2.53.1.2.3.1.4
Counter32
Counts the number of times that the state machine transitions from AUTHENTICATING to AUTHENTICATED, as a result of the Backend Authentication state machine indicating successful authentication of the Supplicant (authSuccess = TRUE). Reference: 9.4.2, 8.5.4.2.4
etsysMulti1xAeAuthTimeoutsWhileAuthenticating
1.3.6.1.4.1.5624.1.2.53.1.2.3.1.5
Counter32
Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of the Backend Authentication state machine indicating authentication timeout (authTimeout = TRUE). Reference: 9.4.2, 8.5.4.2.5
etsysMulti1xAeAuthFailWhileAuthenticating
1.3.6.1.4.1.5624.1.2.53.1.2.3.1.6
Counter32
Counts the number of times that the state machine transitions from AUTHENTICATING to HELD, as a result of the Backend Authentication state machine indicating authentication failure (authFail = TRUE). Reference: 9.4.2, 8.5.4.2.6
etsysMulti1xAeAuthReauthsWhileAuthenticating
1.3.6.1.4.1.5624.1.2.53.1.2.3.1.7
Counter32
Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of a reauthentication request (reAuthenticate = TRUE). Reference: 9.4.2, 8.5.4.2.7
etsysMulti1xAeAuthEapStartsWhileAuthenticating
1.3.6.1.4.1.5624.1.2.53.1.2.3.1.8
Counter32
Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of an EAPOL-Start message being received from the Supplicant. Reference: 9.4.2, 8.5.4.2.8
etsysMulti1xAeAuthEapLogoffWhileAuthenticating
1.3.6.1.4.1.5624.1.2.53.1.2.3.1.9
Counter32
Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of an EAPOL-Logoff message being received from the Supplicant. Reference: 9.4.2, 8.5.4.2.9
etsysMulti1xAeAuthReauthsWhileAuthenticated
1.3.6.1.4.1.5624.1.2.53.1.2.3.1.10
Counter32
Counts the number of times that the state machine transitions from AUTHENTICATED to CONNECTING, as a result of a reauthentication request (reAuthenticate = TRUE). Reference: 9.4.2, 8.5.4.2.10
etsysMulti1xAeAuthEapStartsWhileAuthenticated
1.3.6.1.4.1.5624.1.2.53.1.2.3.1.11
Counter32
Counts the number of times that the state machine transitions from AUTHENTICATED to CONNECTING, as a result of an EAPOL-Start message being received from the Supplicant. Reference: 9.4.2, 8.5.4.2.11
etsysMulti1xAeAuthEapLogoffWhileAuthenticated
1.3.6.1.4.1.5624.1.2.53.1.2.3.1.12
Counter32
Counts the number of times that the state machine transitions from AUTHENTICATED to DISCONNECTED, as a result of an EAPOL-Logoff message being received from the Supplicant. Reference: 9.4.2, 8.5.4.2.12
etsysMulti1xAeBackendResponses
1.3.6.1.4.1.5624.1.2.53.1.2.3.1.13
Counter32
Counts the number of times that the state machine sends an initial Access-Request packet to the Authentication server (i.e., executes sendRespToServer on entry to the RESPONSE state). Indicates that the Authenticator attempted communication with the Authentication Server. Reference: 9.4.2, 8.5.6.2.1
etsysMulti1xAeBackendAccessChallenges
1.3.6.1.4.1.5624.1.2.53.1.2.3.1.14
Counter32
Counts the number of times that the state machine receives an initial Access-Challenge packet from the Authentication server (i.e., aReq becomes TRUE, causing exit from the RESPONSE state). Indicates that the Authentication Server has communication with the Authenticator. Reference: 9.4.2, 8.5.6.2.2
etsysMulti1xAeBackendOtherRequestsToSupplicant
1.3.6.1.4.1.5624.1.2.53.1.2.3.1.15
Counter32
Counts the number of times that the state machine sends an EAP-Request packet (other than an Identity, Notification, Failure or Success message) to the Supplicant (i.e., executes txReq on entry to the REQUEST state). Indicates that the Authenticator chose an EAP-method. Reference: 9.4.2, 8.5.6.2.3
Counts the number of times that the state machine receives a response from the Supplicant to an initial EAP-Request, and the response is something other than EAP-NAK (i.e., rxResp becomes TRUE, causing the state machine to transition from REQUEST to RESPONSE, and the response is not an EAP-NAK). Indicates that the Supplicant can respond to the Authenticator's chosen EAP-method. Reference: 9.4.2, 8.5.6.2.4
etsysMulti1xAeBackendAuthSuccesses
1.3.6.1.4.1.5624.1.2.53.1.2.3.1.17
Counter32
Counts the number of times that the state machine receives an EAP-Success message from the Authentication Server (i.e., aSuccess becomes TRUE, causing a transition from RESPONSE to SUCCESS). Indicates that the Supplicant has successfully authenticated to the Authentication Server. Reference: 9.4.2, 8.5.6.2.5
etsysMulti1xAeBackendAuthFails
1.3.6.1.4.1.5624.1.2.53.1.2.3.1.18
Counter32
Counts the number of times that the state machine receives an EAP-Failure message from the Authentication Server (i.e., aFail becomes TRUE, causing a transition from RESPONSE to FAIL). Indicates that the Supplicant has not authenticated to the Authentication Server. Reference: 9.4.2, 8.5.6.2.6
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
The Port number associated with this Port. Reference: 802.1X-2001 9.6.1, Port number, 802.1X-2004 9.6.1, Port number
etsysMulti1xSessionOctetsRx
1.3.6.1.4.1.5624.1.2.53.1.2.4.1.1
Counter64 (0..18446744073709551615)
The number of octets of user data received on this port for this session. Reference: 9.4.4, Session Octets Received
etsysMulti1xSessionOctetsTx
1.3.6.1.4.1.5624.1.2.53.1.2.4.1.2
Counter64 (0..18446744073709551615)
The number of octets of user data transmitted on this port for this session. Reference: 9.4.4, Session Octets Transmitted
etsysMulti1xSessionFramesRx
1.3.6.1.4.1.5624.1.2.53.1.2.4.1.3
Counter32
The number of user data frames received on this port for this session. Reference: 9.4.4, Session Frames Received
etsysMulti1xSessionFramesTx
1.3.6.1.4.1.5624.1.2.53.1.2.4.1.4
Counter32
The number of user data frames transmitted on this port for this session. Reference: 9.4.4, Session Frames Transmitted
etsysMulti1xSessionId
1.3.6.1.4.1.5624.1.2.53.1.2.4.1.5
SnmpAdminStringAn octet string containing administrative information, preferably in human-readable form.
To facilitate internationalization, this information is represented using the ISO/IEC IS 10646-1 character set, encoded as an octet string using the UTF-8 transformation format described in [RFC2279].
Since additional code points are added by amendments to the 10646 standard from time to time, implementations must be prepared to encounter any code point from 0x00000000 to 0x7fffffff. Byte sequences that do not correspond to the valid UTF-8 encoding of a code point or are outside this range are prohibited.
The use of control codes should be avoided.
When it is necessary to represent a newline, the control code sequence CR LF should be used.
The use of leading or trailing white space should be avoided.
For code points not directly supported by user interface hardware or software, an alternative means of entry and display, such as hexadecimal, may be provided.
For information encoded in 7-bit US-ASCII, the UTF-8 encoding is identical to the US-ASCII encoding.
UTF-8 may require multiple bytes to represent a single character / code point; thus the length of this object in octets may be different from the number of characters encoded. Similarly, size constraints refer to the number of encoded octets, not the number of characters represented by an encoding.
Note that when this TC is used for an object that is used or envisioned to be used as an index, then a SIZE restriction MUST be specified so that the number of sub-identifiers for any object instance does not exceed the limit of 128, as defined by [RFC3416].
Note that the size of an SnmpAdminString object is measured in octets, not characters. SIZE (0..255) · OCTET STRING · hint 255t
A unique identifier for the session, in the form of a printable ASCII string of at least three characters. Reference: 9.4.4, Session Identifier
The reason for the session termination. Reference: 9.4.4, Session Terminate Cause
etsysMulti1xSessionUserName
1.3.6.1.4.1.5624.1.2.53.1.2.4.1.9
SnmpAdminStringAn octet string containing administrative information, preferably in human-readable form.
To facilitate internationalization, this information is represented using the ISO/IEC IS 10646-1 character set, encoded as an octet string using the UTF-8 transformation format described in [RFC2279].
Since additional code points are added by amendments to the 10646 standard from time to time, implementations must be prepared to encounter any code point from 0x00000000 to 0x7fffffff. Byte sequences that do not correspond to the valid UTF-8 encoding of a code point or are outside this range are prohibited.
The use of control codes should be avoided.
When it is necessary to represent a newline, the control code sequence CR LF should be used.
The use of leading or trailing white space should be avoided.
For code points not directly supported by user interface hardware or software, an alternative means of entry and display, such as hexadecimal, may be provided.
For information encoded in 7-bit US-ASCII, the UTF-8 encoding is identical to the US-ASCII encoding.
UTF-8 may require multiple bytes to represent a single character / code point; thus the length of this object in octets may be different from the number of characters encoded. Similarly, size constraints refer to the number of encoded octets, not the number of characters represented by an encoding.
Note that when this TC is used for an object that is used or envisioned to be used as an index, then a SIZE restriction MUST be specified so that the number of sub-identifiers for any object instance does not exceed the limit of 128, as defined by [RFC3416].
Note that the size of an SnmpAdminString object is measured in octets, not characters. SIZE (0..255) · OCTET STRING · hint 255t
The User-Name representing the identity of the Supplicant PAE. Reference: 9.4.4, Session User Name
etsysMulti1xSessionActive
1.3.6.1.4.1.5624.1.2.53.1.2.4.1.10
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
The Port number associated with this Port. Reference: 802.1X-2001 9.6.1, Port number, 802.1X-2004 9.6.1, Port number
etsysMulti1xSupplicantActive
1.3.6.1.4.1.5624.1.2.53.1.2.5.1.1
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
Indicates if the associated Access Entity is currently active.
etsysMulti1xSupplicantUserName
1.3.6.1.4.1.5624.1.2.53.1.2.5.1.2
SnmpAdminStringAn octet string containing administrative information, preferably in human-readable form.
To facilitate internationalization, this information is represented using the ISO/IEC IS 10646-1 character set, encoded as an octet string using the UTF-8 transformation format described in [RFC2279].
Since additional code points are added by amendments to the 10646 standard from time to time, implementations must be prepared to encounter any code point from 0x00000000 to 0x7fffffff. Byte sequences that do not correspond to the valid UTF-8 encoding of a code point or are outside this range are prohibited.
The use of control codes should be avoided.
When it is necessary to represent a newline, the control code sequence CR LF should be used.
The use of leading or trailing white space should be avoided.
For code points not directly supported by user interface hardware or software, an alternative means of entry and display, such as hexadecimal, may be provided.
For information encoded in 7-bit US-ASCII, the UTF-8 encoding is identical to the US-ASCII encoding.
UTF-8 may require multiple bytes to represent a single character / code point; thus the length of this object in octets may be different from the number of characters encoded. Similarly, size constraints refer to the number of encoded octets, not the number of characters represented by an encoding.
Note that when this TC is used for an object that is used or envisioned to be used as an index, then a SIZE restriction MUST be specified so that the number of sub-identifiers for any object instance does not exceed the limit of 128, as defined by [RFC3416].
Note that the size of an SnmpAdminString object is measured in octets, not characters. SIZE (0..255) · OCTET STRING · hint 255t
The User-Name representing the identity of the Supplicant PAE. Reference: 9.4.4, Session User Name
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
The Port number associated with this Port. Reference: 802.1X-2001 9.6.1, Port number, 802.1X-2004 9.6.1, Port number
etsysMulti1xUserNameIndex
1.3.6.1.4.1.5624.1.2.53.1.2.6.1.1
SnmpAdminStringAn octet string containing administrative information, preferably in human-readable form.
To facilitate internationalization, this information is represented using the ISO/IEC IS 10646-1 character set, encoded as an octet string using the UTF-8 transformation format described in [RFC2279].
Since additional code points are added by amendments to the 10646 standard from time to time, implementations must be prepared to encounter any code point from 0x00000000 to 0x7fffffff. Byte sequences that do not correspond to the valid UTF-8 encoding of a code point or are outside this range are prohibited.
The use of control codes should be avoided.
When it is necessary to represent a newline, the control code sequence CR LF should be used.
The use of leading or trailing white space should be avoided.
For code points not directly supported by user interface hardware or software, an alternative means of entry and display, such as hexadecimal, may be provided.
For information encoded in 7-bit US-ASCII, the UTF-8 encoding is identical to the US-ASCII encoding.
UTF-8 may require multiple bytes to represent a single character / code point; thus the length of this object in octets may be different from the number of characters encoded. Similarly, size constraints refer to the number of encoded octets, not the number of characters represented by an encoding.
Note that when this TC is used for an object that is used or envisioned to be used as an index, then a SIZE restriction MUST be specified so that the number of sub-identifiers for any object instance does not exceed the limit of 128, as defined by [RFC3416].
Note that the size of an SnmpAdminString object is measured in octets, not characters. SIZE (8) · OCTET STRING · hint 255t
The fixed length equivalent of the etsysMulti1xUserName object. When the length of the corresponding etsysMulti1xUserName object is less then 8 octets this object is padded with null octets. When the length of the corresponding etsysMulti1xUserName object is greater than 8 octets this object has the value of the etsysMulti1xUserName object truncated to 20 octets.
etsysMulti1xUserName
1.3.6.1.4.1.5624.1.2.53.1.2.6.1.2
SnmpAdminStringAn octet string containing administrative information, preferably in human-readable form.
To facilitate internationalization, this information is represented using the ISO/IEC IS 10646-1 character set, encoded as an octet string using the UTF-8 transformation format described in [RFC2279].
Since additional code points are added by amendments to the 10646 standard from time to time, implementations must be prepared to encounter any code point from 0x00000000 to 0x7fffffff. Byte sequences that do not correspond to the valid UTF-8 encoding of a code point or are outside this range are prohibited.
The use of control codes should be avoided.
When it is necessary to represent a newline, the control code sequence CR LF should be used.
The use of leading or trailing white space should be avoided.
For code points not directly supported by user interface hardware or software, an alternative means of entry and display, such as hexadecimal, may be provided.
For information encoded in 7-bit US-ASCII, the UTF-8 encoding is identical to the US-ASCII encoding.
UTF-8 may require multiple bytes to represent a single character / code point; thus the length of this object in octets may be different from the number of characters encoded. Similarly, size constraints refer to the number of encoded octets, not the number of characters represented by an encoding.
Note that when this TC is used for an object that is used or envisioned to be used as an index, then a SIZE restriction MUST be specified so that the number of sub-identifiers for any object instance does not exceed the limit of 128, as defined by [RFC3416].
Note that the size of an SnmpAdminString object is measured in octets, not characters. SIZE (0..255) · OCTET STRING · hint 255t
The User-Name representing the identity of the Supplicant PAE. Reference: 9.4.4, Session User Name
etsysMulti1xUserActive
1.3.6.1.4.1.5624.1.2.53.1.2.6.1.3
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
Indicates if the associated Access Entity is currently active.
etsysMulti1xUserAddress
1.3.6.1.4.1.5624.1.2.53.1.2.6.1.4
MacAddressRepresents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires MAC addresses to be transmitted most significant bit first. SIZE (6) · OCTET STRING · hint 1x:
The User-Name representing the identity of the Supplicant PAE. Reference: 9.4.4, Session User Name
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
The Port number associated with this Port. Reference: 802.1X-2001 9.6.1, Port number, 802.1X-2004 9.6.1, Port number
etsysMulti1xActiveSupplicantAddress
1.3.6.1.4.1.5624.1.2.53.1.2.7.1.1
MacAddressRepresents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires MAC addresses to be transmitted most significant bit first. SIZE (6) · OCTET STRING · hint 1x:
The MAC address that this active Access Entity is currently bound to.